IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- remove gobject introspection switch
- disable hid2hci by default (moved to bluez)
- disable action-modeswitch by default (will move to usb_modeswitch)
- disable edd_id by default (problems with disk signatures)
- disable legacy floppy by default (no more nasty device node hacks by default)
The XT2 has a rocker (up/down/enter) and back button on the side
in tablet mode, none of which work currently. Add entries for
these keys.
There is some overlap here with scan codes used in other Dell
models, so these buttons are put in a new file specific to this
model.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
This reverts commit 905818f596.
We do want to build some extras, just not the ones with extra dependencies.
Thanks to Juergen Daubert for pointing this out.
This barrier service is usually not enabled by default. If enabled,
it acts as a barrier for basic.target -- so all later services will
wait for udev completely finishing its coldplug run.
It might be enabled just unconditionally, or pulled-in on-demand by
broken or non-hotplug-aware services that assume a fully populated
/dev at startup.
We should bind the udev socket from systemd, so we are sure
that the abstract namespace socket is always bound by a root
process and there is never a window during an update where
an untrusted process can steal our socket.
Also split the udev.service file, so that the daemon can be
updated/restarted without triggering any coldplug events.
These patches enable usb autosuspend for the qemu emulated HID devices.
This reduces the cpu load for idle guests with a hid device attached
because the linux kernel will suspend the usb bus then and qemu can stop
running a 1000 Hz to emulate the (active) UHCI controller.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We need to preserve the database of network interfaces while we
rename them. Use the kernel's numbers wherever possible, instead
of the device names.
Fix wrong database filenames which contain a '/', translated
from '!' in the kernel name.
Fix segfault for kobject pathes where the subsystem can not be
determined from sysfs.
Renaming network devices might delay events for the other device, which has
the same devpath in the meantime as the original event. Causing a delay until
the timout of the event is reached.
Look at the ifindex/devnum of the devices to check if they are really
the same devices.
This is to match where libudev.so is installed and it works because
all dependent libraries are already installed in / instead of /usr on
most distros:
$ ldd /usr/lib64/libgudev-1.0.so
linux-vdso.so.1 => (0x00007fff44dff000)
libudev.so.0 => /lib64/libudev.so.0 (0x0000003bf2600000)
libgobject-2.0.so.0 => /lib64/libgobject-2.0.so.0 (0x0000003fb5200000)
libgthread-2.0.so.0 => /lib64/libgthread-2.0.so.0 (0x0000003fb4e00000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x0000003d5b000000)
librt.so.1 => /lib64/librt.so.1 (0x0000003d5b800000)
libglib-2.0.so.0 => /lib64/libglib-2.0.so.0 (0x0000003fb4a00000)
libc.so.6 => /lib64/libc.so.6 (0x0000003d5ac00000)
/lib64/ld-linux-x86-64.so.2 (0x0000003d5a800000)
With this change it is possible to write libgudev applications that
can be installed in /bin or /sbin and can run without /usr being
mounted. This is needed for e.g. udisks, NetworkManager and other
subsystem-specific daemons.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add test/rule-syntax-check.py, a script for checking the syntax of all udev
rules files passed as command line arguments.
Add a wrapper test/rules-test.sh which calls rule-syntax-check.py on all udev
rules that we ship, but does nothing if Python is not available. Integrate this
into make check/distcheck.
Harald Hoyer discovered some incorrect behavior while debugging
problems with network interface renaming:
Udev events might be queued for devices which are renamed. A new
device registered the same time may claime the old name and create
a database entry for it. The current rename logic would move over
this databse entry to the wrong device.
michael@linux-iwk5:/opt/hgnome/src/udev> make V=1
make --no-print-directory all-recursive
Making all in .
PKG_CONFIG_PATH=./data:$PKG_CONFIG_PATH \
LD_LIBRARY_PATH=./extras/gudev \
/opt/hgnome/bin/g-ir-scanner -v \
--namespace GUdev \
..
./extras/gudev/gudevdevice.c
/opt/hgnome/bin/python: error while loading shared libraries:
libpython2.5.so.1.0: cannot open shared object file: No such file or
directory
make[2]: *** [extras/gudev/GUdev-1.0.gir] Error 127
commit 2599cabd36770785a13bf884049d649d385fd80c
Author: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Fri Jun 18 02:08:48 2010 +0300
Add autodetection for xD/smartmedia cards
This can easily be extended for other types of FTL
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Add gudev-1.0.vapi. This is based on the output of
vapigen --library gudev-1.0 GUdev-1.0.gir
with fixes to array/list semantics and include file names.
Many laptop models need the same volume-key release quirk. Currently, two
models have identical force-release-maps/ keymap files (dell-studio-1557 and
fujitsu-amilo-si1848) and two more need to be added (Mitac and Coolbox QBook).
This replaces the identical force-release-maps files with one
'common-volume-keys' file to make adding new models easier.
There is no obvious DMI commonality between the models needing the quirk (i.e.
they do not all share the same BIOS), so it will remain necessary to scan for
each model separately in 95-keyboard-force-release.rules.
https://launchpad.net/bugs/565459
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
The Fujitsu Amilo Si 1848+u laptop requires the volume and mute keys
quirking.
https://launchpad.net/bugs/530089
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
Dell Studio 1557 does not generate a release code when the volume keys
are pressed, causing them to generate infinite key presses. This forces
key release of these keys.
Signed-off-by: Jerone Young <jerone.young@canonical.com>
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
Many statements in this document are no longer correct, or even
suggest things we do not want to support, or do not work at all
with the current version of udev.
Any new documentation should better be added to the udev man page,
which is usually kept up-to-date.
Move extras/keymap/keymaps/force-release/ to
extras/keymap/force-release-maps/, so that check-keymaps.sh does not stumble
over the directory. It's also a more logical source layout.
We need to prevent that libudev parses half-written database files.
Also for "change" events, we need to make sure, that database files
always exist to be read by libudev, and that they are not first deleted
before they are re-created.
Add support for special function keys on Lenovo Thinkpad USB Keyboard
Tracepoint.
- VoIP hotkey "FN+F6" is mapped to camera, and may need to change
if there is a standard VoIP hotkey defined.
- Mute Microphone key has not been defined, as there is no
standard key defined for it yet.
Signed-off-by: Jerone Young <jerone.young@canonical.com>
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
It handles only RUN but not IMPORT and PROGRAM. There is no sane way
to suppress program execution. Most important programs run with IMPORT
these days. Also events can no longer suppressed with the libudev
netlink messages, so UDEV_RUN does nothing useful and is just
inconsistent.
Some laptop keyboards don't generate release events
for some hotkeys. Since linux-2.6.32 the list of scancodes
for which to enable the force_release quirk can be set
via sysfs.
Apply this to Samsung N130.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
On Thu, Dec 3, 2009 at 14:31, Daniel Elstner <daniel.kitta@googlemail.com> wrote:
> However, I'd recommend to look first in the build directory, and then in
> the source directory to match the behavior of make with VPATH builds.
> The idea is that a file in the build tree, if it exists, overrides a
> file of the same name in the source tree.
The include is still missing:
GEN extras/gudev/GUdev-1.0.gir
In file included from <stdin>:4:
/home/kay/work/src/udev/extras/gudev/gudev.h:26:34: error: gudev/gudevenumtypes.h: No such file or directory
Also prepend $(builddir).
Makefile.am (extras/gudev/GUdev-1.0.gir): Look for gudevenumtypes.h
in both the build directory and the source directory, so that it works
in either case.
Now use libudev to clean up hardcoded /sys/ and /device/ paths, and to also
support direct input device arguments. Now both "input4" and "event4" will
work.
input_id probes input/event devices for their class (keyboard, keys, mouse,
touchpad, tablet, joystick). This is based on the corresponding hal code in
hald/linux/device.c, input_test_{abs,rel,...}.
This should provide enough functionality to get hal-less X.org working (which
in particular needs to know exactly which devices are touchpads).
Replace the brittle hacks in 60-persistent-input.rules with checking for the
new ID_INPUT_* flags. This keeps the old ID_CLASS properties for now (but they
are to be removed later on).
Note: The current code has several hacks still, which are to be replaced with
proper libudev calls later on.
Actually dev_t is an unsigned quad type (e.g. 64-bit even on 32-bit
x86) so defining it to be an integer is wrong and not future
proof. Thus, redefine it to actually be a dev_t (as originally wanted)
and instead add a work-around for GNOME bug #584517, see
https://bugzilla.gnome.org/show_bug.cgi?id=584517
for details. This way, GObject Introspection will still work.
This change is technically an API/ABI break but
- all released GUdev versions requires the user to understand that
the API/ABI is unstable by requiring the G_UDEV_API_IS_SUBJECT_TO_CHANGE
symbols to be defined
- functions using GUdevDeviceNumber are rarely used
so we don't bump the so number.
Signed-off-by: David Zeuthen <davidz@redhat.com>
