IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In order to avoid inflating the dependency list for the core
library, use dlopen when inspecting elfs, since it's only
used in two non-core executables.
Allows to pass a portable profile when doing offline analysis of
units. Especially useful for analyzing portable images, since a
lot of the security-relevant settings in those cases come from
the profiles, but they are not shipped in the portable images.
Make oomctl a bit less likely to race with systemd-oomd receiving the
managed oom cgroup info by checking oomctl output in a loop with
timeout.
Fixes#21146
The test was changed at @bluca 's request to avoid sleeps,
but the change insufficient to avoid all races.
The kill command is now run from the script itself to avoid using
ExecStartPost
All our D-Bus services support the LogControl1 API, but homed didn't so
far. Fix that, and make use of it in the test case, to make debugging it
easier.
Linux 5.15 broke kernel API:
e70344c059
Previously setting IOPRIO_CLASS_NONE for a process would then report
IOPRIO_CLASS_NONE back. But since 5.15 it reports IOPRIO_CLASS_BE
instead. Since IOPRIO_CLASS_NONE is an alias for a special setting of
IOPRIO_CLASS_BE this makes some sense, but it's also a kernel API
breakage that our testsuite trips up on.
(I made some minimal effort to inform the kernel people about this API
breakage during the 5.15 rc phase, but noone was interested.)
Either way let's hadle this gracefully in our test suite and accept
"best-effort" too when "none" was set.
(This is only triggable if the tests are run on 5.15 with full privs)
ASan is having a hard time to get its LD_PRELOAD= shenanigans straight
with all the shells flying around. Let's make it a bit easier by using
one of the nifty systemctl's features instead.
so we can run TEST-46 under sanitizers once again.
`systemd-homed` runs fsck on home directories, which reports a memory
leak we're not interested in. Let's introduce an LSan suppression file
to get around this. Since the patterns in the suppression file are
matched using basic substring match[0], they're a bit cumbersome, but
should get the work one.
[0] https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer#suppressions
Example leaks (as reported by TEST-46):
```
systemd-homed[1333]: =================================================================
systemd-homed[1333]: ==1333==ERROR: LeakSanitizer: detected memory leaks
systemd-homed[1333]: Direct leak of 24 byte(s) in 1 object(s) allocated from:
systemd-homed[1333]: #0 0x7f0c8facccd1 in calloc (/usr/lib/clang/12.0.1/lib/linux/libclang_rt.asan-x86_64.so+0xf4cd1)
systemd-homed[1333]: #1 0x558d9494ff67 (/usr/bin/fsck+0x3f67)
systemd-homed[1333]: Direct leak of 6 byte(s) in 1 object(s) allocated from:
systemd-homed[1333]: #0 0x7f0c8fa906c1 in strdup (/usr/lib/clang/12.0.1/lib/linux/libclang_rt.asan-x86_64.so+0xb86c1)
systemd-homed[1333]: #1 0x558d949518fd (/usr/bin/fsck+0x58fd)
systemd-homed[1333]: SUMMARY: AddressSanitizer: 30 byte(s) leaked in 2 allocation(s).
systemd-homed[1337]: ==1337==WARNING: Symbolizer was blocked from starting itself!
systemd-homed[1337]: =================================================================
systemd-homed[1337]: ==1337==ERROR: LeakSanitizer: detected memory leaks
systemd-homed[1337]: Direct leak of 67584 byte(s) in 1 object(s) allocated from:
systemd-homed[1337]: #0 0x7f01edb84b19 (/usr/lib/clang/12.0.1/lib/linux/libclang_rt.asan-x86_64.so+0xf4b19)
systemd-homed[1337]: #1 0x7f01e8326829 (/usr/bin/../lib/libLLVM-12.so+0xb46829)
systemd-homed[1337]: SUMMARY: AddressSanitizer: 67584 byte(s) leaked in 1 allocation(s).
```
With the suppression file:
```
systemd-homed[1339]: -----------------------------------------------------
systemd-homed[1339]: Suppressions used:
systemd-homed[1339]: count bytes template
systemd-homed[1339]: 2 30 /bin/fsck$
systemd-homed[1339]: -----------------------------------------------------
systemd-homed[1343]: ==1343==WARNING: Symbolizer was blocked from starting itself!
systemd-homed[1343]: -----------------------------------------------------
systemd-homed[1343]: Suppressions used:
systemd-homed[1343]: count bytes template
systemd-homed[1343]: 1 67584 /lib/libLLVM
systemd-homed[1343]: -----------------------------------------------------
```
This moves the backing store to a separate tmpfs which we can nicely put
a size limit on to make sure we can test maximization sanely: if we ask
for the home dir to be grown really large it should effectively only be
grown until the size of the backing tmpfs.
(While we are at it, also set a cheaper KDF so that we don't waste CI
cycles for password hashing that aren#t secure anyway.)
Since the GNU `diff` utility uses grep-style regular expressions[0], which
use the BRE style, we need to tweak the regex to make it work properly
(most notably - in BRE the meta characters need to be escaped).
```
$ diff a b
21c21
< Volume Key: 256bit
---
> Volume Key: 257bit
25c25
< Disk Ceiling: 323.2M
---
> Disk Ceiling: 323.1M
$ diff -I '^\s*Disk (Size|Free|Floor|Ceiling):' a b
21c21
< Volume Key: 256bit
---
> Volume Key: 257bit
25c25
< Disk Ceiling: 323.2M
---
> Disk Ceiling: 323.1M
$ diff -I '^\s*Disk \(Size\|Free\|Floor\|Ceiling\):' a b && echo OK
21c21
< Volume Key: 256bit
---
> Volume Key: 257bit
```
Caught in one of the nightly CentOS CI cron jobs.
[0] https://www.gnu.org/software/diffutils/manual/html_node/Specified-Lines.html
Forcing a specific fs for the image is usually a bad idea because the initrd
(borrowed from the host) is likely to include only support for the filesystem
used by the host's rootfs.
Since the point of this test is to check aliases on mount units, there's no
specific need for ext4, hence drop any parts that request or rely on ext4.
systemd-run --scope --user failed to run in system 249.6, cf. #21297. Add tests
for systemd-run --scope and systemd-run --scope --user to make sure this does
not regress again.
This introduces `ExitType=main|cgroup` for services.
Similar to how `Type` specifies the launch of a service, `ExitType` is
concerned with how systemd determines that a service exited.
- If set to `main` (the current behavior), the service manager will consider
the unit stopped when the main process exits.
- The `cgroup` exit type is meant for applications whose forking model is not
known ahead of time and which might not have a specific main process.
The service will stay running as long as at least one process in the cgroup
is running. This is intended for transient or automatically generated
services, such as graphical applications inside of a desktop environment.
Motivation for this is #16805. The original PR (#18782) was reverted (#20073)
after realizing that the exit status of "the last process in the cgroup" can't
reliably be known (#19385)
This version instead uses the main process exit status if there is one and just
listens to the cgroup empty event otherwise.
The advantages of a service with `ExitType=cgroup` over scopes are:
- Integrated logging / stdout redirection
- Avoids the race / synchronisation issue between launch and scope creation
- More extensive use of drop-ins and thus distro-level configuration:
by moving from scopes to services we can have drop ins that will affect
properties that can only be set during service creation,
like `OOMPolicy` and security-related properties
- It makes systemd-xdg-autostart-generator usable by fixing [1], as obviously
only services can be used in the generator, not scopes.
[1] https://bugs.kde.org/show_bug.cgi?id=433299
The new lvm autoactivation method runs `vgchange` via
`systemd-run --no-block`[0], which means that checking if the unit
is in the `active` state is not enough, since the main binary might
still be running. Let's fix this by waiting until the unit reaches
the `exited` sub state.
Follow-up to:
* 29f8bef05e
* e50d743f99
[0] https://sourceware.org/git/?p=lvm2.git;a=blob;f=udev/69-dm-lvm.rules.in;h=39e5b98074010745f78a7a86a05929700c9cd690;hb=67722b312390cdab29c076c912e14bd739c5c0f6#l83
Example:
```
[ 17.102002] systemd-udevd[282]: sdf: '/usr/bin/systemd-run -r --no-block --property DefaultDependencies=no --unit lvm-activate-iscsi_lvm2212 /usr/bin/lvm vgchange -aay --nohints iscsi_lvm2212'(err) 'Running as unit: lvm-activate-iscsi_>
[ 17.102522] systemd-udevd[282]: sdf: Process '/usr/bin/systemd-run -r --no-block --property DefaultDependencies=no --unit lvm-activate-iscsi_lvm2212 /usr/bin/lvm vgchange -aay --nohints iscsi_lvm2212' succeeded.
[ 17.102697] systemd-udevd[282]: sdf: Adding watch on '/dev/sdf'
[ 17.104944] systemd[1]: lvm-activate-iscsi_lvm2212.service: Changed dead -> running
...
[ 17.105434] systemd[1]: Started /usr/bin/lvm vgchange -aay --nohints iscsi_lvm2212.
[ 17.105601] systemd[931]: lvm-activate-iscsi_lvm2212.service: Executing: /usr/bin/lvm vgchange -aay --nohints iscsi_lvm2212
...
[ 17.420228] testsuite-64.sh[268]: + systemctl -q is-active lvm-activate-iscsi_lvm2212.service
[ 17.420228] testsuite-64.sh[268]: + return 0
[ 17.420228] testsuite-64.sh[268]: + test -e /dev/disk/by-path/ip-127.0.0.1:3260-iscsi-iqn.2021-09.com.example:iscsi.lvm.test-lun-4
[ 17.420228] testsuite-64.sh[268]: + udevadm settle
[ 17.420228] testsuite-64.sh[268]: + test -e /dev/iscsi_lvm2212/mypart1
...
[ 17.451313] systemd[1]: testsuite-64.service: Main process exited, code=exited, status=1/FAILURE
[ 17.451475] systemd[1]: testsuite-64.service: Failed with result 'exit-code'.
...
[ 17.555759] systemd[1]: Starting End the test...
[ 17.556972] sh[941]: + systemctl poweroff --no-block
...
[ 17.688923] lvm[931]: 2 logical volume(s) in volume group "iscsi_lvm2212" now active
...
[ 17.838484] systemd[1]: lvm-activate-iscsi_lvm2212.service: Child 931 belongs to lvm-activate-iscsi_lvm2212.service.
[ 17.838718] systemd[1]: lvm-activate-iscsi_lvm2212.service: Main process exited, code=exited, status=0/SUCCESS (success)
```
In some cases an offline analysis should ignore some fields, for example
a portable service in an image will never list RootImage/RootDirectory, as
they are added at runtime, and thus can be skipped.
Alternative to https://github.com/systemd/systemd/pull/20531.
Whenever a service triggered by another unit fails condition checks,
stop the triggering unit to prevent systemd busy looping trying to
start the triggered unit.
This test makes assumptions on the availability of some mappings contained in
kbd-model-map and therefore strongly relies on the version shipped by
upstream. IOW the test is likely to fail if it's installed on a system with a
more comprehensive kbd-model-map.
This patch makes the upstream kbd-model-map file available via a symlink in
test/testdata/test-keymap-util dir and makes sure that this specific version is
always used by test-keymap-util regardless of whether the test is installed and
run on a different system or directly run (optionally via meson) from the
project working dir.
When combined with a tmpfs on /run or /var/lib, allows to create
arbitrary and ephemeral symlinks for StateDirectory or RuntimeDirectory.
This is especially useful when sharing these directories between
different services, to make the same state/runtime directory 'backend'
appear as different names to each service, so that they can be added/removed
to a sharing agreement transparently, without code changes.
An example (simplified, but real) use case:
foo.service:
StateDirectory=foo
bar.service:
StateDirectory=bar
foo.service.d/shared.conf:
StateDirectory=
StateDirectory=shared:foo
bar.service.d/shared.conf:
StateDirectory=
StateDirectory=shared:bar
foo and bar use respectively /var/lib/foo and /var/lib/bar. Then
the orchestration layer decides to stop this sharing, the drop-in
can be removed. The services won't need any update and will keep
working and being able to store state, transparently.
To keep backward compatibility, new DBUS messages are added.
The /var/lib/private/foo -> /var/lib/foo symlink for StateDirectory and
DynamicUser is set up on the host filesystem, before the mount namespacing
is brought up. If an empty /var/lib is used, to ensure the service does not
see other services data, the symlink is then not available despite
/var/lib/private being set up as expected.
Make a list of symlinks that need to be set up, and create them after all
the namespaced filesystems have been created, but before any eventual
read-only switch is flipped.
Previously, the prefix delegation is enabled when at least one
downstream interfaces request it. But, when the DHCPv6 client on the
upstream interface is configured, some downstream interfaces may not
exist yet, nor have .network file assigned.
Also, if a system has thousands of interfaces, then the previous logic
introduce O(n^2) search.
This makes the prefix delegation is always enabled, except when it is
explicitly disabled. Hopefully, that should not break anything, as the
DHCPv6 server should ignore the prefix delegation request if the server
do not have any prefix to delegate.
Collecting coverage causes a significant slowdown in general, but since
this test requires certain timing, we need to tweak the defaults to make
it reliably pass.
Depending on the location of the original build dir, either ProtectHome=
or ProtectSystem= may get in the way when creating the gcov metadata
files.
Follow-up to:
* 02d7e73013
* 6c9efba677
Otherwise we miss quite a lot of coverage (mainly from logind,
hostnamed, networkd, and possibly others), since they can't write their
reports with `ProtectSystem=strict`.
With `ProtectSystem=strict` gcov is unable to write the *.gcda files
with collected coverage. Let's add a yet another switch to make such
restriction less strict to make gcov happy.
This addresses following errors:
```
...
systemd-networkd[272469]: profiling:/systemd-meson-build/src/shared/libsystemd-shared-249.a.p/binfmt-util.c.gcda:Cannot open
systemd-networkd[272469]: profiling:/systemd-meson-build/src/shared/libsystemd-shared-249.a.p/base-filesystem.c.gcda:Cannot open
systemd-networkd[272469]: profiling:/systemd-meson-build/src/shared/libsystemd-shared-249.a.p/barrier.c.gcda:Cannot open
systemd-networkd[272469]: profiling:/systemd-meson-build/src/shared/libsystemd-shared-249.a.p/ask-password-api.c.gcda:Cannot open
systemd-networkd[272469]: profiling:/systemd-meson-build/src/shared/libsystemd-shared-249.a.p/apparmor-util.c.gcda:Cannot open
systemd-networkd[272469]: profiling:/systemd-meson-build/src/shared/libsystemd-shared-249.a.p/acpi-fpdt.c.gcda:Cannot open
...
```
When playing around with the coverage-enabled build I kept hitting
an issue where dnsmasq failed to start because the previous instance was
still shutting down. This should, hopefully, help to mitigate that.
I want to mark some files to be ignored for licensing purposes,
e.g. output from fuzzers and other samples. By using the gitattribute
machinery for this we don't need to design a custom protocol:
$ git check-attr generated test/test-sysusers/unhappy-*
test/test-sysusers/unhappy-1.expected-err: generated: set
test/test-sysusers/unhappy-1.input: generated: unspecified
test/test-sysusers/unhappy-2.expected-err: generated: set
test/test-sysusers/unhappy-2.input: generated: unspecified
test/test-sysusers/unhappy-3.expected-err: generated: set
test/test-sysusers/unhappy-3.input: generated: unspecified
Those are all consumed by our parser, so they all support comments.
I was considering whether they should have a license header at all,
but in the end I decided to add it because those files are often created
by copying parts of real unit files. And if the real ones have a license,
then those might as well. It's easier to add it than to make an exception.
We also have a bunch of files that have some bytes and a lot
of text, like the journal export format. For those, it is still quite
useful when the tools try to diff them, so let's not mark those.
When they work they finish quickly in under two minutes on slow machines, when
soft lock ups happen in the nested virt machine each test can run for like 5
hours clogging up CI infrastructure. It's best to fail quicker than that when
qemu or kernel are broken.
If the packages are built without libssl simply skip the signature
checks.
Oct 06 21:21:32 H systemd[1]: systemd 249.1249.gcc4df1f787.0 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL
...
Oct 06 21:22:21 H systemd[459]: Activation of signed Verity volume worked neither via the kernel nor in userspace, can't activate.
Follow-up for #20691
This verifies that the argv part of any exec_command parameters that
are sent through dbus is not empty at deserialization time.
There is an additional check in service.c service_verify() that again
checks if all exec_commands are correctly populated, after the service
has been loaded, whether through dbus or otherwise.
Fixes#20933.
If -Db_coverage=true is used at build time, then ARTIFACT_DIRECTORY/TEST-XX-FOO.coverage-info
files are created with code coverage data, and run-integration-test.sh also
merges them into ARTIFACT_DIRECTORY/merged.coverage-info since the coveralls.io
helpers accept only a single file.
megasearch.net was meant to be a non-existing bogus domain, and had been
for a long time. But it seems some domain grabber recently registered
it, and it's an actual thing now:
$ host megasearch.net
megasearch.net has address 207.148.248.143
This causes the test to fail randomly.
Use search.example.com instead which yields
$ host search.example.com
Host search.example.com not found: 3(NXDOMAIN)
Fixes: #18357
Since f833df3 we now actually use the seccomp rules defined in portable
profiles. However, the default one is too restrictive for sanitizers, as
it blocks certain syscall required by LSan. Mitigate this by using the
'trusted' profile when running TEST-29-PORTABLE under sanitizers.
This adds a high level test verifying that syscall filtering in
combination with a simple architecture filter for the "native"
architecture works fine.
