IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
By default the test suite prefers qemu, and uses nspawn only if
a test specifically says it doesn't support qemu.
Add a variable to allow flipping the default, and run as many
tests under nspawn as possible.
Allows to split the test run in two parts. Most tests can run under
nspawn which is much faster, and they can be ran in one chunk with
TEST_NO_QEMU=1. The qemu-only tests, which are just a handful, can
be ran in another chunk with TEST_QEMU_ONLY=1.
Allows autopkgtest to be split in two parts.
The image build function greps for ExecStart lines in unit files, but some
of them (eg: systemd-firstboot) do not use a full path.
It then falls back to 'type -P' but that only works if you have the binary
installed. For optional binaries like systemd-firstboot, the installation
can then fail.
Manually check if the binary already exists in /[usr/][s]bin.
Usually on Debian ROOTLIBDIR is /lib/<arch triplet>, which is not the right place.
Use pkg-config since we define it, and then fallback to /usr/lib/systemd/user which is
the canonical location.
On both Debian&friends and Fedora dbus/dbus-broker install the user socket/service
under /usr/lib/systemd/user, not /lib/systemd/systemd/user.
Previously, dns_answer_add() was O(n^2).
With this change dns_packet_extract() becomes ~15 times faster for some
extremal case.
Before:
```
$ time ./fuzz-dns-packet ~/downloads/clusterfuzz-testcase-minimized-fuzz-dns-packet-5631106733047808
/home/watanabe/downloads/clusterfuzz-testcase-minimized-fuzz-dns-packet-5631106733047808... ok
real 0m15.453s
user 0m15.430s
sys 0m0.007s
```
After:
```
$ time ./fuzz-dns-packet ~/downloads/clusterfuzz-testcase-minimized-fuzz-dns-packet-5631106733047808
/home/watanabe/downloads/clusterfuzz-testcase-minimized-fuzz-dns-packet-5631106733047808... ok
real 0m0.831s
user 0m0.824s
sys 0m0.006s
```
Hopefully fixes oss-fuzz#19227.
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19227
Allow configuration for IPv6 discovered routes to be ignored instead of
adding them as a route. This can be used to block unwanted routes, for
example, you may wish to not receive some set of routes on an interface
if they are causing issues.
This allows them to be executed in parallel and also gives us
better reporting.
The dump files are renamed to avoid repeating "dmidecode-dump", since that
string is already present in the subdirectory name.
Add memory_id program to set properties about the physical memory
devices in the system. This is useful on machines with removable memory
modules to show how the machine can be upgraded, and on all devices to
detect the actual RAM size, without relying on the OS accessible amount.
Closes: #16651
I suspect the original version of the regex was written on a system,
which prints both the QEMU version and the QEMU package version in the
--version output, like Fedora:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 4.2.1 (qemu-4.2.1-1.fc32)
Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers
However, Arch Linux prints only the QEMU version:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 5.2.0
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
This causes the awk regex to not match the version string, since there's
no whitespace after it, causing the version check to fail (as well as the
TEST-36-NUMAPOLICY) as well.
Follow-up for 43b49470d1.
Upgrading to qemu 5.2 breaks TEST-36-NUMAPOLICY like:
qemu-system-x86_64: total memory for NUMA nodes (0x0) should
equal RAM size (0x20000000)
Use the new (as in >=2014) form of memdev in test 36:
-object memory-backend-ram,id=mem0,size=512M -numa node,memdev=mem0,nodeid=0
Since some target systems are as old as qemu 1.5.3 (CentOS7) but the new
kind to specify was added in qemu 2.1 this needs to add version parsing and
add the argument only when qemu is >=5.2.
Fixes#17986.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Previous commits changed the dhcpv4 retransmission algorithm to be
slightly slower, changing the amount of time it takes to notify
systemd-networkd that the dhcpv4 configuration has (transiently)
failed from around 14 second up to 28 seconds.
Since the test_dhcp_client_with_ipv4ll_without_dhcp_server test
configures an interface to use dhcpv4 without any operating dhcpv4
server running, it must increase the amount of time it waits for
the test interface to reach degraded state.
The commit 6f3ac0d517 drops the prefix and
suffix in TAGS= property. But there exists several rules that have like
`TAGS=="*:tag:*"`. So, the property must be always prefixed and suffixed
with ":".
Fixes#17930.
As interfaces will be reconfigured asynchronously after `networkctl reload`.
So, right after `networkctl reload` is finished, interfaces may be still
in 'configured' state with the old .network files.
Fixes#17533
The memory pressure values of the units in TEST-56-OOMD seemed to be a
lot lower after updating to linux 5.9. This is likely due to a fix from
e22c6ed90a.
To account for this, I lowered memory.high on testbloat.service to
throttle it even more. This was enough to generate the 50%+ value to trigger
oomd for the test, but as an extra precaution I also lowered the oomd
threshold to 1% so it's certain to try and kill testbloat.service.
They are not really boolean, because we have both ipv4 and ipv6, but
for each protocol we have either unset, no, and yes.
From https://github.com/systemd/systemd/issues/13316#issuecomment-582906817:
LinkLocalAddressing must be a boolean option, at least for ipv4:
- LinkLocalAddressing=no => no LL at all.
- LinkLocalAddressing=yes + Static Address => invalid configuration, warn and
interpret as LinkLocalAddressing=no, no LL at all.
(we check that during parsing and reject)
- LinkLocalAddressing=yes + DHCP => LL process should be subordinated to the
DHCP one, an LL address must be acquired at start or after a short N
unsuccessful DHCP attemps, and must not stop DHCP to keeping trying. When a
DHCP address is acquired, drop the LL address. If the DHCP address is lost,
re-adquire a new LL address.
(next patch will move in this direction)
- LinkLocalAddressing=fallback has no reason to exist, because LL address must
always be allocated as a fallback option when using DHCP. Having both DHCP
and LL address at the same time is an RFC violation, so
LinkLocalAdressing=yes correctly implemented is already the "fallback"
behavior. The fallback option must be deprecated and if present in older
configs must be interpreted as LinkLocalAddressing=yes.
(removed)
- And for IPv6, the LinkLocalAddress option has any sense at all? IPv6-LL
address aren't required to be always set for every IPv6 enabled interface (in
this case, coexisting with static or dynamic address if any)? Shouldn't be
always =yes?
(good question)
This effectively reverts 29e81083bd. There is no
special "fallback" mode now, so the check doesn't make sense anymore.
The systemd-user file has been moved from /etc/pam.d into /usr/lib/pam.d,
so test-functions needs to copy it from /usr/lib/pam.d instead.
This will copy it from either location.
In Fedora rawhide various perl modules are now available as separate
packages that are not pulled in by dependencies. If we don't have some
package, skip the tests.
This ugly code is apparently the way to do conditional imports:
https://www.cs.ait.ac.th/~on/O/oreilly/perl/cookbook/ch12_03.htm.
FixedRandomDelay=yes will use
`siphash24(sd_id128_get_machine() || MANAGER_IS_SYSTEM(m) || getuid() || u->id)`,
where || is concatenation, instead of a random number to choose a value between
0 and RandomizedDelaySec= as the timer delay.
This essentially sets up a fixed, but seemingly random, offset for each timer
iteration rather than having a random offset recalculated each time it fires.
Closes#10355
Co-author: Anita Zhang <the.anitazha@gmail.com>
umount emits an error message "no mount point specified" if the
tmpfs isn't mounted yet, which is the normal case.
Suppress that by redirecting stderr.
Script for generating LOTS of SCSI disk and partition devices in
the fake sysfs we use for udev testing.
This script is supposed to be run after sys-script.py. It uses
code from sys-script.py as template to generate additional SCSI disk data
structures. Together with the "generator" code in udev-test.pl
added in the previous patch, it allows to run udev tests with almost
arbitrarily many devices, and thus to do performance scaling tests.
Manually listing all devices in the test definition becomes cumbersome with
lots of devices. Add a function that scans on all block devices in
the test sysfs and generates a list of devices to test.
Add 4 new tests using multiple devices. Number 2-4 use many
devices claiming the same symlink, where only one device has
a higher priority thatn the others. They fail sporadically with
the current code, if a race condition causes the symlink to point
to the wrong device. Test 4 is like test 2 with sleeps in between,
it's much less likely to fail.
the "last_rule" option hasn't been supported for some time.
Therefore this test fails if a "not_exp_links" attribute is added,
as it should be. Mark it appropriately.
Instead of testing the existence or non-exisitence of just a single
symlink, allow testing of several links per device.
Change the test definitions accordingly.
Test if symlinks are created correctly by comparing the symlink
targets to the devnode path. This implies (for the symlink) that
major/minor numbers and permissions are correct, as we have tested
that on the devnode already.
More often than not, the created devnode is the basename of the
sysfs entry. The "devnode" device may be used to override the
auto-detected node name.
Permissions and major/minor number are now verified on the devnode
itself, not on symlinks.
For those tests where exp_name is set to the computed devnode name,
the explicit "exp_name" can be removed. "exp_name" is only required for
symlinks.
This allows separate testing for devnodes and symlinks an a follow-up
patch.
Allow testing cases where multiple devices are added and removed
simultaneously. Tests are started as synchronously as possible using a
semaphore, in order to test possible race conditions. If this isn't desired,
the test parameter "sleep_us" can be set to the number of microseconds to wait
between udev invocations.
Allow testing cases where multiple devices are added and removed.
This implies a change of the data structure: every test allows
for multiple devices to be added, and "exp_name" etc. are now properties
of the device, not of the test.
The link state file is always removed when networkd is stopping. So,
the deserialization logic does not work. Moreover, the ADDRESSES=
entry is not used by sd-network, so serialization is also not necessary.
The test sometimes fails, e.g. in bionic-s390x ci. I think it might be because
the service binary exits before we get a chance to notice that it is running:
13:59:31 --- Listing only the last 100 lines from a long log. ---
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4639845)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4539608)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4439376)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4338946)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4238702)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4138424)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4038116)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3937835)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3837553)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3737250)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3636934)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3536622)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3436318)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3336021)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3235730)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3135468)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3035158)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2934855)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2834541)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2732511)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2632255)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2532014)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2431746)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2331438)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2231213)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2130952)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2030663)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1930428)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1830172)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1729906)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1629652)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1529368)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1429110)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1328852)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1228593)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1128320)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1028083)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 927824)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 827564)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 724935)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 624664)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 524411)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 424124)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 323853)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 223585)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 120356)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 18053)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: -82385)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 Test timeout when testing path-unit.path
It seems test/test-path/path-service.service wasn't actually used for anything.
