IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
(This also removes support for booting into the EFI firmware setup
without logind. That's because otherwise the non-EFI fallback logind
implements can't work.)
Fixes: #9896
Based on the journalctl documentation of this option added in 23ad99b519
(#10527), but with the first reference to “fields” replaced by “journal
messages”, since I think it’s less common to show other fields with
`systemctl status` (though it’s possible with the `-o` option).
Having systemctl disable/unmask remove all symlinks in /etc and /run is
unintuitive and breaks existing use cases.
systemctl should behave symmetrically.
A "systemctl --runtime unmask" should undo a "systemctl --runtime mask"
action.
Say you have a service, which was masked by the admin in /etc.
If you temporarily want to mask the execution of the service (say in a
script), you'd create a runtime mask via "systemctl --runtime mask".
It is is now no longer possible to undo this temporary mask without
nuking the admin changes, unless you start rm'ing files manually.
While it is useful to be able to remove all enablement/mask symlinks in
one go, this should be done via a separate command line switch, like
"systemctl --all unmask".
This reverts commit 4910b35078.
Fixes: #9393
The term “positive” is often read to exclude 0 (though “strictly
positive” is sometimes used to clarify this), so let’s explicitly state
that --lines=0 is legal and completely disables journal output.
Motivated by an answer on StackExchange [1].
[1]: https://unix.stackexchange.com/a/475068/44049
This makes it possible to wait until boot is finished without having to poll
for this command repeatedly, instead using the syntax:
$ systemctl is-system-running --wait
Waiting is implemented by waiting for the StartupFinished signal to be posted
on the bus.
Register the matcher before checking for the property to avoid race conditions.
Tested by artificially delaying startup with a oneshot service and calling this
command, checked that it emitted `running` and exited with a 0 return code as
soon as the delay service completed startup.
Also tested that booting to degraded state unblocks the command.
Inserted a delay between getting the property and waiting for the signal and
confirmed this seems to work free of race conditions.
Updated the --help text (under --wait) and the man page to document the new
feature.
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Since bb28e68477 parsing failures of
certain unit file settings will result in load failures of units. This
introduces a new load state "bad-setting" that is entered in precisely
this case.
With this addition error messages on bad settings should be a lot more
explicit, as we don't have to show some generic "errno" error in that
case, but can explicitly say that a bad setting is at fault.
Internally this unit load state is entered as soon as any configuration
loader call returns ENOEXEC. Hence: config parser calls should return
ENOEXEC now for such essential unit file settings. Turns out, they
generally already do.
Fixes: #9107
These states should never be visible to the outside, as they are used
only internally while loading unit. Hence let's drop them from the
documentation.
'systemctl disable --runtime' would disable a unit, but only if it was enabled
with '--runtime', and silently do nothing if the unit was enabled persistently.
And similarly 'systemctl disable' would do nothing if the unit was enabled in
/run. This just doesn't seem useful.
This pathch changes enable/disable and mask/unmask to be asymmetrical. enable
and mask create symlinks in /etc or /run, depending on whether --runtime was
specified. disable and unmask remove symlinks from both locations. --runtime
cannot be specified for the disable and unmask verbs.
The advantage is that 'disable' now means that the unit is disabled, period.
And similarly for 'unmask', all masks are removed.
Similarly for preset and preset-all, they now cannot be called with --runtime,
and are asymmetrical: when they enable a unit, symlinks are created in /etc.
When they disable a unit, all symlinks are nuked.
$ systemctl --root=/ enable bluetooth
Created symlink /etc/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /etc/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ --runtime enable bluetooth
Created symlink /run/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /run/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ disable bluetooth
Removed /run/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /run/systemd/system/dbus-org.bluez.service.
Removed /etc/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /etc/systemd/system/dbus-org.bluez.service.
$ systemctl --root=/ disable --runtime bluetooth
--runtime cannot be used with disable
$ systemctl --root=/ mask --runtime bluetooth
Created symlink /run/systemd/system/bluetooth.service → /dev/null.
$ systemctl --root=/ mask bluetooth
Created symlink /etc/systemd/system/bluetooth.service → /dev/null.
$ systemctl --root=/ unmask bluetooth
Removed /run/systemd/system/bluetooth.service.
Removed /etc/systemd/system/bluetooth.service.
$ systemctl --root=/ unmask --runtime bluetooth
--runtime cannot be used with unmask
$ systemctl --root=/ --runtime enable bluetooth
Created symlink /run/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /run/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ enable bluetooth
Created symlink /etc/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /etc/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ preset bluetooth
Removed /run/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /run/systemd/system/dbus-org.bluez.service.
Removed /etc/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /etc/systemd/system/dbus-org.bluez.service.
$ systemctl --root=/ preset --runtime bluetooth
--runtime cannot be used with preset
$ systemctl preset-all --runtime
--runtime cannot be used with preset-all
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
NAME is kind of meaningless, because everything has a name. "Unit"
makes it more obvious that a name of a unit is necessary. I was always
momentarily baffled by "set-property NAME ASSIGNMENT...", where there
are two objects (the unit and the property), and it's not clear which of
the two "NAME" is supposed to signify.
We already made a similar change when talking about the "restart"
command, let's also do this for "systemctl reload" and friends.
Follow-up for: 6539dd7c42
See: #7126
This documents the status quo, clarifying when we are synchronous and
when asynchronous by default and when --no-block is support to force
asynchronous operation.
See: #6479
I think this matches the spirit of "indirect" well: the unit
*might* be active, even though it is not "installed" in the
sense of symlinks created based on the [Install] section.
The changes to test-install-root touch the same lines as in the previous
commit; the change in each case is from
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_ENABLED)
to
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_DISABLED)
to
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_INDIRECT)
in the last two commits.
When a unit has a symlink that makes an alias in the filesystem,
but that name is not specified in [Install], it is confusing
is the unit is shown as "enabled". Look only for names specified
in Alias=.
Fixes#6338.
v2:
- Fix indentation.
- Fix checking for normal enablement, when the symlink name is the same as the
unit name. This case wasn't handled properly in v1.
v3:
- Rework the patch to also handle templates properly:
A template templ@.service with DefaultInstance=foo will be considered
enabled only when templ@foo.service symlink is found. Symlinks with
other instance names do not count, which matches the logic for aliases
to normal units. Tests are updated.
The irreversible job mode is required to ensure that shutdown is not
interrupted by the activation of a unit with a conflict.
We already used the correct job mode for `ctrl-alt-del.target`. But not
for `exit.target` (SIGINT of user manager). The SIGRT shutdown signals
also needed fixing.
Also change SIGRTMIN+0 to isolate default.target, instead of starting
it. The previous behaviour was documented. However there was no reason
given for it, nor can we provide one. The problem that isolate is too
aggressive anywhere outside of emergency.target (#2607) is orthogonal.
This feature is "accessible by different means and only really a safety
net"; it is confusing for it to differ from `systemctl default` without
explanation.
`AllowIsolate=yes` is retained on poweroff.target etc. for backwards
compatibility.
`sigpwr.target` is also an obvious candidate for linking to a shutdown
target. Unforunately it is also a possible hook for implementing some
logic like system V init did, reading `/etc/powerstatus`. If we switched
to starting `sigpwr.target` with REPLACE_IRREVERSIBLY, attempts to run
`systemctl shutdown` from it would fail, if they had not thought to set
`DefaultDependencies=no`. We had provided no examples for `sigpwr`, and
the whole idea is cruft to keep legacy people happy. For the moment, I
leave `sigpwr` alone, with no risk of disrupting anyone's
previously-working, half-working, or untested setup.
Fixes#6484. See also #6471
The last sentence in the paragraph described the behaviour of `--global`. But "the last case" we listed was "only this boot", which does not match... This was the fifth case described, but there are only _four_ different option names. Fix it.
Also called "ANSI-C Quoting" in info:(bash) ANSI-C Quoting.
The escaping rules are a POSIX proposal, and are described in
http://austingroupbugs.net/view.php?id=249. There's a lot of back-and-forth on
the details of escaping of control characters, but we'll be only using a small
subset of the syntax that is common to all proposals and is widely supported.
Unfortunately dash and fish and maybe some other shells do not support it (see
the man page patch for a list).
This allows environment variables to be safely exported using show-environment
and imported into the shell. Shells which do not support this syntax will have
to do something like
export $(systemctl show-environment|grep -v '=\$')
or whatever is appropriate in their case. I think csh and fish do not support
the A=B syntax anyway, so the change is moot for them.
Fixes#5536.
v2:
- also escape newlines (which currently disallowed in shell values, so this
doesn't really matter), and tabs (as $'\t'), and ! (as $'!'). This way quoted
output can be included directly in both interactive and noninteractive bash.
Per man:file-hierarchy(7), /lib is just a compatibility symlink; the
other manpages also refer to /usr/lib.
Found with:
git grep -P '(?<!/usr|/var|local)/lib' man/
'systemctl --failed' is an extremely common operation and it's nice to have
a shortcut for it.
Revert "man: don't document systemctl --failed" and add the option back to
systemctl's help and shell completion scripts.
This reverts commit 036359ba8d.
- Show example of all `systemctl status` output and documents what possible
"Loaded:", "Active" and "Enabled" values mean.
- Documents what different colors of the dot mean.
- Documents "gotcha" with load-on-demand behavior which will report units as
"loaded" even if they are only loaded to show their status.
(From @poettering: https://github.com/systemd/systemd/issues/5063#issuecomment-272115024 )
When a user is trying to understand what is going on with a restart action, it is useful to explicitly describe how the action is run. It may seem obvious, but it is helpful to be explicit so one knows there isn't a special ExecRestart= or similar option that they could be looking at.
As requested in
https://github.com/systemd/systemd/pull/4864#pullrequestreview-12372557.
docbook will substitute triple dots for the ellipsis in man output, so this has
no effect on the troff output, only on HTML, making it infinitesimally nicer.
In some places we show output from programs, which use dots, and those places
should not be changed. In some tables, the alignment would change if dots were
changed to the ellipsis which is only one character. Since docbook replaces the
ellipsis automatically, we should leave those be. This patch changes all other
places.
It may be desired by users to know what targets a particular service is
installed into. Improve user friendliness by teaching the is-enabled
command to show such information when used with --full.
This patch makes use of the newly added UnitFileFlags and adds
UNIT_FILE_DRY_RUN flag into it. Since the API had already been modified,
it's now easy to add the new dry-run feature for other commands as
well. As a next step, --dry-run could be added to systemctl, which in
turn might pave the way for a long requested dry-run feature when
running systemctl start.
This adds two (privileged) bus calls Ref() and Unref() to the Unit interface.
The two calls may be used by clients to pin a unit into memory, so that various
runtime properties aren't flushed out by the automatic GC. This is necessary
to permit clients to race-freely acquire runtime results (such as process exit
status/code or accumulated CPU time) on successful service termination.
Ref() and Unref() are fully recursive, hence act like the usual reference
counting concept in C. Taking a reference is a privileged operation, as this
allows pinning units into memory which consumes resources.
Transient units may also gain a reference at the time of creation, via the new
AddRef property (that is only defined for transient units at the time of
creation).
The man pages didn't ever mention that symlinks to units can be created, and what
exactly this means. Fix that omission, and disallow presets on alias names.
To "search something", in the meaning of looking for it, is valid,
but "search _for_ something" is much more commonly used, especially when
the meaning could be confused with "looking _through_ something"
(for some other object).
(C.f. "the police search a person", "the police search for a person".)
Also reword the rest of the paragraph to avoid using "automatically"
three times.
Clarify that "systemctl enable" can operate either on unit names or on unit
file paths (also, adjust the --help text to clarify this). Say that "systemctl
enable" on unit file paths also links the unit into the search path.
Many other fixes.
This should improve the documentation to avoid further confusion around #3706.
When "preset" was executed for a unit without install info, we'd warn similarly
as for "enable" and "disable". But "preset" is usually called for all units,
because the preset files are provided by the distribution, and the units are under
control of individual programs, and it's reasonable to call "preset" for all units
rather then try to do it only for the ones that can be installed.
We also don't warn about missing info for "preset-all". Thus it seems reasonable
to silently ignore units w/o install info when presetting.
(In addition, when more than one unit was specified, we'd issue the warning
only if none of them had install info. But this is probably something to fix
for enable/disable too.)
This allows dropping all user configuration and reverting back to the vendor
default of a unit file. It basically undoes what "systemctl edit", "systemctl
set-property" and "systemctl mask" do.
Now, that the search path logic knows the unit path for transient units we also
can introduce an explicit unit file state "transient" that clarifies to the
user what kind of unit file he is encountering.
Now that we store the generator directories in LookupPaths we can use this to
intrdouce a new unit file state called "generated", for units in these
directories.
Fixes: #2348
With this option, systemctl will only print the rhs in show:
$ systemctl show -p Wants,After systemd-journald --value
systemd-journald.socket ...
systemd-journald-dev-log.socket ...
This is useful in scripts, because the need to call awk or similar
is removed.
The "is-enabled" command doesn't care whether the symlinks are declared in the
[Install] section of a unit file or not, when returning "enabled". Any alias,
.wants/ or .requires/ symlinks suffice.
Fixes: #975
But also keep the old name as (undocumented) compatibility around.
The reload-or-try-restart was documented to be a NOP if the unit is not running, since the previous commits this is
also implemented. The old name suggests that the "try" logic only applies to restarting. Fix this, by moving the "try-"
to the front, to indicate that the whole option is a NOP if the service isn't running.
'set-property' has been primarly designed to change some properties of
*active* units.
However it can easily work on inactive units as well. In that case
changes are only saved in a drop-in for futur uses and changes will be
effective when unit will be started.
Actually it already works on inactive units but that was not
documented and not fully supported. Indeed the inactive units had to
be known by the manager otherwise it was reported as not loaded:
$ systemctl status my-test.service
* my-test.service - My Testing Unit
Loaded: loaded (/etc/systemd/system/my-test.service; static; vendor preset: disabled)
Drop-In: /etc/systemd/system/my-test.service.d
Active: inactive (dead)
$ systemctl set-property my-test.service MemoryLimit=1000000
Failed to set unit properties on my-test.service: Unit my-test.service is not loaded.
[ Note: that the unit load state reported by the 'status' command
might be confusing since it claimed the unit as loaded but
'set-property' reported the contrary. ]
One can possibily workaround this by making the unit a dependency of
another active unit so the manager will keep it around:
$ systemctl add-wants multi-user.target my-test.service
Created symlink from /etc/systemd/system/multi-user.target.wants/my-test.service to /etc/systemd/system/my-test.service.
$ systemctl set-property my-test.service MemoryLimit=1000000
$ systemctl status my-test.service
* my-test.service - My Testing Unit
Loaded: loaded (/etc/systemd/system/my-test.service; enabled; vendor preset: disabled)
Drop-In: /etc/systemd/system/my-test.service.d
`-50-MemoryLimit.conf
Active: inactive (dead)
This patch simply forces 'SetUnitProperties()' to load the unit if
it's not already the case.
It also documents the fact that 'set-property' can be used on inactive
units.
