IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This new unit settings allows restricting which address families are
available to processes. This is an effective way to minimize the attack
surface of services, by turning off entire network stacks for them.
This is based on seccomp, and does not work on x86-32, since seccomp
cannot filter socketcall() syscalls on that platform.
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice
that the speed was mistakenly documented to be in bytes before this change.
This permit to switch to a specific apparmor profile when starting a daemon. This
will result in a non operation if apparmor is disabled.
It also add a new build requirement on libapparmor for using this feature.
Either it is shared across threads, or it is per-thread: decide.
Reading the source code, I see a thread_local identifier, so that's
that. But that does not yet preclude that a program may pass around
the pointer returned from the function among its own threads.
Do a best effort at saying so.
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
This adds the host side of the veth link to the given bridge.
Also refactor the creation of the veth interfaces a bit to set it up
from the host rather than the container. This simplifies the addition
to the bridge, but otherwise the behavior is unchanged.
Actually 'STDOUT' is something that doesn't appear anywhere: in the
stdlib we have 'stdin', and there's only the constant STDOUT_FILENO,
so there's no reason to use capitals. When refering to code,
STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in
other places they are replaced with normal phrases like standard
output, etc.
* standardize capitalization of STDIN, STDOUT, and STDERR
* reword some sentences for clarity
* reflow some very long lines to be shorter than ~80 characters
* add some missing <literal>, <constant>, <varname>, <option>, and <filename> tags
The behavior of this is a little cryptic in that $MAINPID must exit as
a direct result of receiving a signal in order for a listed signal to
be considered a success condition.
This is useful to prohibit execution of non-native processes on systems,
for example 32bit binaries on 64bit systems, this lowering the attack
service on incorrect syscall and ioctl 32→64bit mappings.
- Allow configuration of an errno error to return from blacklisted
syscalls, instead of immediately terminating a process.
- Fix parsing logic when libseccomp support is turned off
- Only keep the actual syscall set in the ExecContext, and generate the
string version only on demand.
This allows customization of the arguments used by less. The main
motivation is that some folks might not like having --no-init on every
invocation of less.
Also limit the range of vlan ids. Other implementations and
documentation use the ranges {0,1}-{4094,4095}, but we use
the one accepted by the kernel: 0-4094.
Reported-by: Oleksii Shevchuk <alxchk@gmail.com>
Let's always call the security labels the same way:
SMACK: "Smack Label"
SELINUX: "SELinux Security Context"
And the low-level encapsulation is called "seclabel". Now let's hope we
stick to this vocabulary in future, too, and don't mix "label"s and
"security contexts" and so on wildly.
This permit to let system administrators decide of the domain of a service.
This can be used with templated units to have each service in a différent
domain ( for example, a per customer database, using MLS or anything ),
or can be used to force a non selinux enabled system (jvm, erlang, etc)
to start in a different domain for each service.
This is initialized from XDG_SESSION_DESKTOP and is useful for GNOME
to recognize its own sessions. It's supposed to be set to a short string
identifying the session, such as "kde" or "gnome".
- As suggested, prefix argument variables with "arg_" how we do this
usually.
- As suggested, don't involve memory allocations when storing command
line arguments.
- Break --help text at 80 chars
- man: explain that this is about SELinux
- don't do unnecessary memory allocations when putting together mount
option string
This patch adds to new options:
-Z PROCESS_LABEL
This specifies the process label to run on processes run within the container.
-L FILE_LABEL
The file label to assign to memory file systems created within the container.
For example if you wanted to wrap an container with SELinux sandbox labels, you could execute a command line the following
chcon system_u:object_r:svirt_sandbox_file_t:s0:c0,c1 -R /srv/container
systemd-nspawn -L system_u:object_r:svirt_sandbox_file_t:s0:c0,c1 -Z system_u:system_r:svirt_lxc_net_t:s0:c0,c1 -D /srv/container /bin/sh
These connections are never torn down, even when the DHCP specifications say that
they should be. This is useful/necessary when the rootfs (or another critical fs)
is mounted over this network connection, and dataloss would result if the connection
is lost.
This option defaults to off, but our initrd generator (TBD) will enable it when
applicable.
This should fix some race with terminating systemd --user, where the
system systemd instance might race against the user systemd instance
when sending SIGTERM.
When set to auto, status will shown when the first ephemeral message
is shown (a job has been running for five seconds). Then until the
boot or shutdown ends, status messages will be shown.
No indication about the switch is done: I think it should be clear
for the user that first the cylon eye and the ephemeral messages appear,
and afterwards messages are displayed.
The initial arming of the event source was still wrong, but now should
really be fixed.
signal(7) provides a list of functions which may be called from a
signal handler. Other functions, which only call those functions and
don't access global memory and are reentrant are also safe.
sd_j_sendv was mostly OK, but would call mkostemp and writev in a
fallback path, which are unsafe.
Being able to call sd_j_sendv in a async-signal-safe way is important
because it allows it be used in signal handlers.
Safety is achieved by replacing mkostemp with open(O_TMPFILE) and an
open-coded writev replacement which uses write. Unfortunately,
O_TMPFILE is only available on kernels >= 3.11. When O_TMPFILE is
unavailable, an open-coded mkostemp is used.
https://bugzilla.gnome.org/show_bug.cgi?id=722889
Debian recently introduced the option key-slot to /etc/crypttab to
specify the LUKS key slot to be used for decrypting the device. On
systems where a keyfile is used and the key is not in the first slot,
this can speed up the boot process quite a bit, since cryptsetup does
not need to try all of the slots sequentially. (Unsuccessfully testing
a key slot typically takes up to about 1 second.)
This patch makes systemd aware of this option.
Debian bug that introduced the feature:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=704470
Similar to PrivateNetwork=, PrivateTmp= introduce PrivateDevices= that
sets up a private /dev with only the API pseudo-devices like /dev/null,
/dev/zero, /dev/random, but not any physical devices in them.
Before, journald would remove journal files until both MaxUse= and
KeepFree= settings would be satisfied. The first one depends (if set
automatically) on the size of the file system and is constant. But
the second one depends on current use of the file system, and a spike
in disk usage would cause journald to delete journal files, trying to
reach usage which would leave 15% of the disk free. This behaviour is
surprising for the user who doesn't expect his logs to be purged when
disk usage goes above 85%, which on a large disk could be some
gigabytes from being full. In addition attempting to keep 15% free
provides an attack vector where filling the disk sufficiently disposes
of almost all logs.
Instead, obey KeepFree= only as a limit on adding additional files.
When replacing old files with new, ignore KeepFree=. This means that
if journal disk usage reached some high point that at some later point
start to violate the KeepFree= constraint, journald will not add files
to go above this point, but it will stay (slightly) below it. When
journald is restarted, it forgets the previous maximum usage value,
and sets the limit based on the current usage, so if disk remains to
be filled, journald might use one journal-file-size less on each
restart, if restarts happen just after rotation. This seems like a
reasonable compromise between implementation complexity and robustness.
This is a continuation of e3e0314b systemctl: allow globbing in commands
which take multiple unit names.
Multiple patterns can be specified, as separate arguments, or as one argument
with patterns seperated by commas.
If patterns are given, at least one unit must be matched (by any of the patterns).
This is different behaviour than systemctl, but here it is necessary because
otherwise anything would be matched, which is unlikely to be the intended
behaviour.
https://bugs.freedesktop.org/show_bug.cgi?id=59336
These keys are mandatory in [Address]/[Route] sections. Otherwise, we
hit an assert:
ens3: setting addresses
Assertion 'address->family == 2 || address->family == 10' failed at /build/amd64-generic/tmp/portage/sys-apps/systemd-9999-r1/work/systemd-9999/src/network/networkd-address.c:137, function address_configure(). Aborting.
Reported-by: Alex Polvi <alex.polvi@coreos.com>
At the same time make sure Route's Destination and Gateway uses the same address family.
Nspawn has --setenv, and systemd itself accepts systemd.setenv.
It is nice to have the same parameter name everywhere.
Old name is accepted, but not advertised.
grawity:
It looks like the old version _was_ correct – the default value will
be "Type=dbus" if the service has a BusName set.
Suggested change: "if neither Type= nor BusName= is specified"
This is a recurring submission and includes corrections to:
- missing words, preposition choice.
- change of /lib to /usr/lib, because that is what most distros are
using as the system-wide location for systemd/udev files.
Various operations done by systemd-tmpfiles may only be safely done at
boot (e.g. removal of X lockfiles in /tmp, creation of /run/nologin).
Other operations may be done at any point in time (e.g. setting the
ownership on /{run,var}/log/journal). This distinction is largely
orthogonal to the type of operation.
A new switch --unsafe is added, and operations which should only be
executed during bootup are marked with an exclamation mark in the
configuration files. systemd-tmpfiles.service is modified to use this
switch, and guards are added so it is hard to re-start it by mistake.
If we install a new version of systemd, we actually want to enforce
some changes to tmpfiles configuration immediately. This should now be
possible to do safely, so distribution packages can be modified to
execute the "safe" subset at package installation time.
/run/nologin creation is split out into a separate service, to make it
easy to override.
https://bugzilla.redhat.com/show_bug.cgi?id=1043212https://bugzilla.redhat.com/show_bug.cgi?id=1045849
Condition for /lib (necessary for split /usr) was missing from the unit.
Some changes which were done in tmpfiles.d(5) were not carried over to
systemd-tmpfiles(1).
Also use markup where possible.
Also, introduce a new environment variable named $WATCHDOG_PID which
cotnains the PID of the process that is supposed to send the keep-alive
events. This is similar how $LISTEN_FDS and $LISTEN_PID work together,
and protects against confusing processes further down the process tree
due to inherited environment.
These specifiers require NSS lookups to work, and we really shouldn't do
them from PID 1 hence. With this change they are now only supported for
user systemd instance, or when the configured user for a unit is root.
We have lots of questions from people who assume that shell syntax works
here, so let's be very explicit what is allowed and what is not. A few
examples should also help.
http://bugs.debian.org/732156
This adds the new library call sd_journal_open_container() and a new
"-M" switch to journalctl. Particular care is taken that journalctl's
"-b" switch resolves to the current boot ID of the container, not the
host.
Instead of returning an enum of return codes, make them return error
codes like kdbus does internally.
Also, document this behaviour so that clients can stick to it.
(Also rework bus-control.c to always have to functions for dbus1 vs.
kernel implementation of the various calls.)
Those files can be in a completely deferent format and also
arbitrarily long, and usually contain information about other
stuff. If we ever add SourceLine= or SourceLines= in addition
to SourcePath=, and can show the relevant information only, this
commit can be reverted.
itistoday> how do you specify multiple dependencies in a unit file? i've been
googling and can't find this basic thing :-\
itistoday> do you use a comma, or use multiple After= statements?
This reverts commit adcf4c81c5.
We have a better solution for the problem of making two processes run in
the same namespace, and --listener is not needed hence and should be
dropped.
Conflicts:
man/systemd-socket-proxyd.xml
This reverts commit adcf4c81c5.
We have a better solution for the problem of making two processes run in
the same namespace, and --listener is not needed hence and should be
dropped.
Conflicts:
man/systemd-socket-proxyd.xml
This will allow specifying more options per address than the
simple Address= entry in the [Network] section.
Preliminary support for the same functionality for [Route] sections
are added, but not yet hooked up, as more testing is needed.
Use Description only internally, and allow Alias to be set
as a separate option. For instance SNMP uses ifalias for
a specific purpose, so let's not write to it by default.
This removed the requirement for devices to be tagged with
'systemd-networkd' before they will be visible to networkd.
Still, as by default we don't ship any .network files, network
devices will simply be tracked, but not touched, unless the
admin configures things explicitly.
