IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts commit 43c6d5abac
(and a small part of 4046d8361c)
It turns out we don't actually need to set the global ip_forward setting.
The only relevant setting is the one on each interface.
What the global toggle actually does is switch forwarding on/off for all
currently present interfaces and change the default for new ones.
That means that by setting the global ip_forward we
- Introduce a race condition, because if the interface with IPForward=yes
is brought up after one with IPForward=no, both will have forwarding
enabled, because the global switch turns it on for all interfaces.
If the other interface comes up first networkd correctly sets forward=0
and it doesn't get overridden.
- Change the forwarding setting for interfaces that networkd is not
configured to touch, even if the user disabled forwarding via sysctl,
either globally or per-interface
As forwarding works fine without this, as long as all relevant interfacest
individually set IPForward=yes: just drop it
This means that non-networkd interfaces use the global default while
networkd interfaces default to off if IPForward isn't given.
Previously all bind mount mounts were applied in the order specified,
followed by all tmpfs mounts in the order specified. This is
problematic, if bind mounts shall be placed within tmpfs mounts.
This patch hence reworks the custom mount point logic, and alwas applies
them in strict prefix-first order. This means the order of mounts
specified on the command line becomes irrelevant, the right operation
will always be executed.
While we are at it this commit also adds native support for overlayfs
mounts, as supported by recent kernels.
Previously, the man page suggested to only use nspawn for testing,
building, and debugging things. However, it is nowadays used in
production and used as building block for rocket, hence let's just admit
that it's pretty much production ready.
Some distributions (such as Fedora) are using the VARIANT field to
indicate to select packages which of several default configurations
they should be using. For example, VARIANT=Server provides a
different default firewall configuration (blocking basically
everything but SSH and the management console) whereas
VARIANT=Workstation opens many other ports for application
compatibility.
By adding this patch to the manual pages, we can standardize on a
cross-distribution mechanism for accomplishing this.
Fedora implementation details are available at
https://fedoraproject.org/wiki/Packaging:Per-Product_Configuration
(David: drop double paranthesis)
For a longer discussion see this:
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030175.html
This introduces /run/systemd/fsck.progress as a simply
AF_UNIX/SOCK_STREAM socket. If it exists and is connectable we'll
connect fsck's -c switch with it. If external programs want to get
progress data they should hence listen on this socket and will get
all they need via that socket. To get information about the connecting
fsck client they should use SO_PEERCRED.
Unless /run/systemd/fsck.progress is around and connectable this change
reverts back to v219 behaviour where we'd forward fsck output to
/dev/console on our own.
Not that all functionality has been ported over to logind, the old
implementation can be removed. There goes one of the oldest parts of
the systemd code base.
The original idea of systemd.pc was to contain arch-independent system
and systemd information. By exposing libdir as part of the fields (added
in eb39a6239c), it started to carry
arch-dependent data, thus breaking multilib systems. It was then moved
to pkgconfiglibdir to deal with this (in
aec432c613), but actually the right
approach is to simply not include libdir in the .pc file at all.
THis patch hence more or less reverts both commits again, and moves the
.pc file back into pkgconfigdatadir.
As alternative for querying the systems primary libdir there's now
"systemd-path system-library-arch", hence a more correct alternative
exists for querying this variable from the .pc file.
Add UDPCheckSum option to enable transmitting UDP checksums when doing
VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx
options to enable sending zero checksums and receiving zero
checksums in VXLAN/IPv6
[tomegun: rebase manpage due to whitespace changes]
Generally, we will not follow symlinks, except for "w".
Avoid documentation for now for fifo, device node, directory lines,
which currently follow symlinks but better shouldn't.
"the name it is" is clumsy english, and since the most recently referred
to thing was a name anyway we can just leave the "it is".
This matches later uses in the same document.
systemd-timesyncd not only does NTP, but also manages clock monotonicity
using a flags file. In future, it might learn PTP support. Hence don't
expose its enablement state as "NTP" but use the more generic term
"network time synchronization". After all, for similar reasons
systemd-timesyncd is not called systemd-ntpd.
This introduces 'HoldoffTimeoutSec' to logind.conf to make
IGNORE_LID_SWITCH_{SUSPEND,STARTUP}_USEC configurable.
Background: If an external monitor is connected, or if the system is
docked, we want to ignore LID events. This is required to support setups
where a laptop is used with external peripherals while the LID is closed.
However, this requires us to probe all hot-plugged devices before reacting
to LID events. But with modern buses like USB, the standards do not impose
any timeout on the slots, so we have no chance to know whether a given
slot is used or not. Hence, after resume and startup, we have to wait a
fixed timeout to give the kernel a chance to probe devices. Our timeout
has always been generous enough to support even the slowest devices.
However, a lot of people didn't use these features and wanted to disable
the hold-off timer. Now we provide a knob to do that.
For daemons which have a main configuration file, there's
little reason for the administrator to use configuration snippets.
They are useful for packagers which need to override settings, but
we shouldn't advertise that as the main way of configuring those
services.
https://bugs.freedesktop.org/show_bug.cgi?id=89397
Introduce BindCarrier= to indicate the set of links that determine if
the current link should be brought UP or DOWN.
[tomegun: add a bit to commit message]
What used to be gummiboot, was renamed sd-boot when it was merged into
systemd. Let's try to be a bit more consistent with the rest of systemd
and rename it again as follows:
The EFI bootloader is now called 'systemd-bootx64.efi', and its sources are in
'src/boot/efi/'. The drop-in directory where bootctl will find EFI loaders
is now /usr/lib/systemd/boot/efi/.
We would require a match against all three: patterns specified
with --to, with --from, and as positional arguments to show an
edge. This does not seem useful. Let instead the positional args
behave like they were specified in both --to and --from, which is
fairly intuitive and should be more useful.
include-what-you-use automatically does this and it makes finding
unnecessary harder to spot. The only content of poll.h is a include
of sys/poll.h so should be harmless.
For now we only support the hardcoded values RT_SCOPE_{UNIVERSE,LOCAL,HOST},
and not numerical values or values from /etc/iproute2/rt_scopes.
This addresses https://bugs.freedesktop.org/show_bug.cgi?id=88508.
This allows both IPv4 and IPv6 link-local addresses to be enabled or disabled. By default
we still enable IPv6LL and disable IPv4LL. The old config option is kept for backwards
compatibility, but removed from the documentation.
When booting with systemd-bootchart, default to call the systemd binary
rather than the init binary on disk, which might be another init system.
Collecting data only works with booting systemd.
On my computer, the minimum brightness enforced by clamping in
backlight is too bright.
Let udev property ID_BACKLIGHT_CLAMP control whether the brightness
is clamped or not.
Both plain opendir() and glob() will bump access time. Privileged
option O_NOATIME can be used to prevent the access time from being
updated. We already used it for subdirectories of the directories
which we were cleaning up. But for the directories specified directly
in the config files, we wouldn't do that. This means that,
paradoxically, our own temporary directories for PrivateTmp would stay
around forever, as long as one let systemd-tmpfiles-clean.service run
regularly, because they had their own glob patterns specified.
https://bugzilla.redhat.com/show_bug.cgi?id=1183684
This patch introduces ipv6 gre and gretap.
test:
ip6gre.netdev:
[NetDev]
Name=ip6gretap
Kind=ip6gretap
[Tunnel]
Local=2a00:ffde:4567:edde::4987
Remote=2001:473:fece:cafe::5179
ip6gre.network:
[Match]
Name=eno16777736
[Network]
Tunnel=ip6gretap
ip link
6: ip6gre@eno16777736: <POINTOPOINT,NOARP> mtu 1448 qdisc noop state
DOWN mode DEFAULT group default
link/gre6 2a:00:ff🇩🇪45:67:ed🇩🇪00:00:00:00:00:00:49:87 peer
20:01:04:73:fe:ce:ca:fe:00:00:00:00:00:00:51:79
For ACLs to be valid, a set of entries for user, group, and other
must be always present. Always add those entries.
While at it, only add the mask ACL if it is actually required, i.e.
when at least on ACL for non-owner group or user exists.
For types which adapt existing files it is generally more useful to accept
globs.
In analogy to z and Z, add recursive versions using uppercase letters.
Technically, making a accept globs is backwards incompatible, but in
practice it probably isn't yet widely used and we can assume that most
people don't create files with wildcards in names.
Functions which are used as callbacks, but not directly on items, are
renamed not to have "item_" prefix.
The data structure used by tmpfiles is changed: instead of hashmaps
mapping {path → Item*} we now have hashmaps containing
{path -> ItemArray}, where ItemArray contains a pointer
to an array of Items.
For current code it doesn't matter much, but when we add new types it
is easier to simply add a new Item for a given path, then to coalesce
multiple lines into one Item.
In the future, this change will also make it possible to remember the
file and line where each Item originates, and use that in reporting
errors. Currently this is not possible, since each Item can be created
from multiple lines.
