IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For now we only support the hardcoded values RT_SCOPE_{UNIVERSE,LOCAL,HOST},
and not numerical values or values from /etc/iproute2/rt_scopes.
This addresses https://bugs.freedesktop.org/show_bug.cgi?id=88508.
This allows both IPv4 and IPv6 link-local addresses to be enabled or disabled. By default
we still enable IPv6LL and disable IPv4LL. The old config option is kept for backwards
compatibility, but removed from the documentation.
When booting with systemd-bootchart, default to call the systemd binary
rather than the init binary on disk, which might be another init system.
Collecting data only works with booting systemd.
On my computer, the minimum brightness enforced by clamping in
backlight is too bright.
Let udev property ID_BACKLIGHT_CLAMP control whether the brightness
is clamped or not.
Both plain opendir() and glob() will bump access time. Privileged
option O_NOATIME can be used to prevent the access time from being
updated. We already used it for subdirectories of the directories
which we were cleaning up. But for the directories specified directly
in the config files, we wouldn't do that. This means that,
paradoxically, our own temporary directories for PrivateTmp would stay
around forever, as long as one let systemd-tmpfiles-clean.service run
regularly, because they had their own glob patterns specified.
https://bugzilla.redhat.com/show_bug.cgi?id=1183684
This patch introduces ipv6 gre and gretap.
test:
ip6gre.netdev:
[NetDev]
Name=ip6gretap
Kind=ip6gretap
[Tunnel]
Local=2a00:ffde:4567:edde::4987
Remote=2001:473:fece:cafe::5179
ip6gre.network:
[Match]
Name=eno16777736
[Network]
Tunnel=ip6gretap
ip link
6: ip6gre@eno16777736: <POINTOPOINT,NOARP> mtu 1448 qdisc noop state
DOWN mode DEFAULT group default
link/gre6 2a:00:ff🇩🇪45:67:ed🇩🇪00:00:00:00:00:00:49:87 peer
20:01:04:73:fe:ce:ca:fe:00:00:00:00:00:00:51:79
For ACLs to be valid, a set of entries for user, group, and other
must be always present. Always add those entries.
While at it, only add the mask ACL if it is actually required, i.e.
when at least on ACL for non-owner group or user exists.
For types which adapt existing files it is generally more useful to accept
globs.
In analogy to z and Z, add recursive versions using uppercase letters.
Technically, making a accept globs is backwards incompatible, but in
practice it probably isn't yet widely used and we can assume that most
people don't create files with wildcards in names.
Functions which are used as callbacks, but not directly on items, are
renamed not to have "item_" prefix.
The data structure used by tmpfiles is changed: instead of hashmaps
mapping {path → Item*} we now have hashmaps containing
{path -> ItemArray}, where ItemArray contains a pointer
to an array of Items.
For current code it doesn't matter much, but when we add new types it
is easier to simply add a new Item for a given path, then to coalesce
multiple lines into one Item.
In the future, this change will also make it possible to remember the
file and line where each Item originates, and use that in reporting
errors. Currently this is not possible, since each Item can be created
from multiple lines.
Given that this is also the place to store raw disk images which are
very much bootable with qemu/kvm it sounds like a misnomer to call the
directory "container". Hence, let's change this sooner rather than
later, and use the generic name, in particular since we otherwise try to
use the generic "machine" preferably over the more specific "container"
or "vm".
This introduces am AddressFamilyBoolean type that works more or less
like a booleaan, but can optionally turn on/off things for ipv4 and ipv6
independently. THis also ports the DHCP field over to it.
Now that networkd's IP masquerading support means that running
containers with "--network-veth" will provide network access out of the
box for the container, let's add a shortcut "-n" for it, to make it
easily accessible.
This adds two new settings to networkd's .network files:
IPForwarding=yes and IPMasquerade=yes. The former controls the
"forwarding" sysctl setting of the interface, thus controlling whether
IP forwarding shall be enabled on the specific interface. The latter
controls whether a firewall rule shall be installed that exposes traffic
coming from the interface as coming from the local host to all other
interfaces.
This also enables both options by default for container network
interfaces, thus making "systemd-nspawn --network-veth" have network
connectivity out of the box.
This turns "lock-session", "activate", "unlock-session",
"enable-linger", "disable-linger" into commands that take no argument,
optionally in which case the callers session/user is implied.
This patch adds more detail to the description of how path escaping
operates and provides a pointer to the systemd-escape program. Either
would serve to answer the question raised in the bug report, so
hopefully this will allow it to be closed.
https://bugs.freedesktop.org/show_bug.cgi?id=87688
With this change it is possible to send file descriptors to PID 1, via
sd_pid_notify_with_fds() which PID 1 will store individually for each
service, and pass via the usual fd passing logic on next invocation.
This is useful for enable daemon reload schemes where daemons serialize
their state to /run, push their fds into PID 1 and terminate, restoring
their state on next start from the data in /run and passed in from PID
1.
The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on
them, and the service they belong to are either not dead or failed, or
have a job queued.
See bug 87859 (https://bugs.freedesktop.org/show_bug.cgi?id=87859). Bug
reporter found the language describing the effect of specifying both a
day and date unclear; hopefully the attached patch will clarify and
allow the bug to be closed.
The handling of the command name and other arguments is unified. This
simplifies things and should make them more predictable for users.
Incidentally, this makes ExecStart handling match the .desktop file
specification, apart for the requirment for an absolute path.
https://bugs.freedesktop.org/show_bug.cgi?id=86171
This pulls out the hwdb managment from udevadm into an independent tool.
The old code is left in place for backwards compatibility, and easy of
testing, but all documentation is dropped to encourage use of the new
tool instead.
Also, when booting up an ephemeral container of / use the system
hostname as default machine name.
This way specifiyng -M is unnecessary when booting up an ephemeral
container, while allowing any number of ephemeral containers to run from
the same tree.
This adds --template= to duplicate an OS tree as btrfs snpashot and run
it
This also adds --ephemeral or -x to create a snapshot of an OS tree and
boot that, removing it after exit.
Let's stick to generic sections that describe the general technology,
instead of specific per-object sections, unless we really have a reason
to do that otherwise.
Support timer options --on-active=, --on-boot=, --on-startup=,
--on-unit-active=, --on-unit-inactive=, --on-calendar=. Each options
corresponding with OnActiveSec=, OnBootSec=, OnStartupSec=,
OnUnitActiveSec=, OnUnitInactiveSec=, OnCalendar= of timer
respectively. And OnCalendar= and WakeSystem= supported by
--timer-property= option like --property= of systemd-run.
And if --unit= option and timer options are specified the command can
be omitted. In this case, systemd-run assumes the target service is
already loaded. And just try to generate transient timer unit only.
This patch makes it possible to set extended attributes on files created
by tmpfiles. This can be especially used to set SMACK security labels on
volatile files and directories.
It is done by adding new line of type "t". Such line should contain
attributes in Argument field, using following format:
name=value
All other fields are ignored.
If value contains spaces, then it must be surrounded by quotation marks.
User can also put quotation mark in value by escaping it with backslash.
Example:
D /var/run/cups - - - -
t /var/run/cups - - - - security.SMACK64=printing
This has been requested repeatedly, so let's give it a go. We explicitly do not allow matching
on names that have already been changed (from a previous udev run, or otherwise), and matching
on unpredictable names (ethX) is discouraged (but not currently disallowed).
We also currently allow:
[Match]
Name=veth0
[Link]
Name=my-name0
SomeOtherSetting=true
Which means that the link file will be applied the first time it is invoked, but
not on subsequent invocations, which may be surprising.
This patch add support to specify path cost of the
bridge port to be configured via conf file.
Exampe: conf
file: br.netdev
[NetDev]
Name=br-test
Kind=bridge
file: br.network
[Match]
Name=em1
[Network]
Bridge=br-test
[BridgePort]
Cost=332
bridge link
2: em1 state UP : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master
br-test state disabled priority 32 cost 332
In man journald.conf, removes reference to XZ as sole form of
compression. See commit d89c8fdf48.
In man coredump.conf, clarifies that "Compression=" controls existence,
not type, of compression.
Several manpages contain duplicate text describing a standard set of .d
configuration directories, with the usual sorting, precedence,
overrides, and so on. Factor this common text out using XInclude before
proliferating it even further.
It helps editing units by either creating a drop-in file, like
/etc/systemd/system/my.service.d/override.conf, or by copying the
original unit from /usr/lib/systemd/ to /etc/systemd/ if the --full
option is specified.
It invokes an editor on temporary files related to the unit files and
if the editor exited successfully, then it renames the temporary files
to their original names (e.g. my.service or override.conf) and
daemon-reload is invoked.
If the temporary file is empty the modification is canceled.
See https://bugzilla.redhat.com/show_bug.cgi?id=906824
In principle SysV stuff is only for compatibility, but we are stuck
with it for the forseeable future, so documentation might as well
be provided.
https://bugs.debian.org/771172
This makes it possible to drop in logind configuration snippets from a
package or other configuration management mechanism.
Add documentation to the header of /etc/logind.conf pointing the user at
/etc/logind.conf.d/*.conf.
Introduce a new helper, conf_parse_many, to parse configuration files in
a search path.
systemd stops adding automatic dependencies on swap.target to swap
units. If a dependency is required, it has to be added by unit
configuration. fstab-generator did that already, except that now it is
modified to create a Requires or Wants type dependency, depending on
whether nofail is specified in /etc/fstab. This makes .swap units
obey the nofail/noauto options more or less the same as .mount units.
Documentation is extended to clarify that, and to make
systemd.mount(5) and system.swap(5) more similar. The gist is not
changed, because current behaviour actually matches existing
documentation.
https://bugs.freedesktop.org/show_bug.cgi?id=86488
This makes udevadm trigger mirror udevadm info, except that multiple
device names can be specified. Instructions in 60-keyboard.hwdb should
now actually work.
udevadm(8) is updated, but it could use a bit more polishing.
https://bugs.freedesktop.org/show_bug.cgi?id=82311
In service file, if the file has some of special SMACK label in
ExecStart= and systemd has no permission for the special SMACK label
then permission error will occurred. To resolve this, systemd should
be able to set its SMACK label to something accessible of ExecStart=.
So introduce new SmackProcessLabel. If label is specified with
SmackProcessLabel= then the child systemd will set its label to
that. To successfully execute the ExecStart=, accessible label should
be specified with SmackProcessLabel=.
Additionally, by SMACK policy, if the file in ExecStart= has no
SMACK64EXEC then the executed process will have given label by
SmackProcessLabel=. But if the file has SMACK64EXEC then the
SMACK64EXEC label will be overridden.
[zj: reword man page]
The previous version was a bit too vague. It is better
to simply list all dependency types that are followed.
Previous version also made an emphasis on dependencies introduced by
configuration. But this command (or systemd) don't care about this
distinction between configured and automatically added dependencies at
all. This distinctionis removed from the main description, and an
explanatory paragraph is added to remind the user that all
dependencies are shown, no matter where they come from.
In the long run we really should figure out if we want to stick with 8ch
or 2ch indenting, and not continue with half-and-half. For now, just
make emacs aware of the files that use 2ch indenting.
--link-journal={host,guest} fail if the host does not have persistent
journalling enabled and /var/log/journal/ does not exist. Even worse, as there
is no stdout/err any more, there is no error message to point that out.
Introduce two new modes "try-host" and "try-guest" which don't fail in this
case, and instead just silently skip the guest journal setup.
Change -j to mean "try-guest" instead of "guest", and fix the wrong --help
output for it (it said "host" before).
Change systemd-nspawn@.service.in to use "try-guest" so that this unit works
with both persistent and non-persistent journals on the host without failing.
https://bugs.debian.org/770275
This effectively reverts 599b6322f1, which
in turn partially reverted 4dc5b821ae.
The --failed switch is not documented on purpose, since it is redundant
due to --state=failed, which it predates. Due to that it's not
documented in --help either.
We generally try to avoid redundant interfaces, but if we need to keep
them for compatibility we do so, however remove them from documentation
to ensure they are not used in future.
The man page is now changed to include a comment about the fact that
--failed is not documented on purpose. Also, explicitly mention
--state=failed as example for --state.
We really don't want to get lost in adding fridge, car, plane, drone, or
whatever else, hence add a generic term "embedded" cover all the cases
where the computer is just part of something bigger, and not at the
focus of things.
For priviliged units this resource control property ensures that the
processes have all controllers systemd manages enabled.
For unpriviliged services (those with User= set) this ensures that
access rights to the service cgroup is granted to the user in question,
to create further subgroups. Note that this only applies to the
name=systemd hierarchy though, as access to other controllers is not
safe for unpriviliged processes.
Delegate=yes should be set for container scopes where a systemd instance
inside the container shall manage the hierarchies below its own cgroup
and have access to all controllers.
Delegate=yes should also be set for user@.service, so that systemd
--user can run, controlling its own cgroup tree.
This commit changes machined, systemd-nspawn@.service and user@.service
to set this boolean, in order to ensure that container management will
just work, and the user systemd instance can run fine.
The term "priority" is misleading because higher levels have lower
priority. "Level" is clearer and shorter.
This commit touches only the textual descriptions, not function and variable
names themselves. "Priority" is used in various command-line switches and
protocol constants, so completly getting rid of "priority" is hard.
I also left "priority" in various places where the clarity suffered
when it was removed.
For now, it's systemd itself that parses the options string, but as soon
as util-linux' swapon can take the option string directly with -o we
should pass it on unmodified.
In some cases it is preferable to ship system images with a pre-generated
binary hwdb database, to avoid having to build it at runtime, avoid shipping
the source hwdb files, or avoid storing large binary files in /etc.
So if hwdb.bin does not exist in /etc/udev/, fall back to looking for it in
UDEVLIBEXECDIR. This keeps the possibility to add files to /etc/udev/hwdb.d/
and re-generating the database which trumps the one in /usr/lib.
Add a new --usr flag to "udevadm hwdb --update" which puts the database
into UDEVLIBEXECDIR.
Adjust systemd-udev-hwdb-update.service to not generate the file in /etc if we
already have it in /usr.
The system start timeout as previously implemented would get confused by
long-running services that are included in the initial system startup
transaction for example by being cron-job-like long-running services
triggered immediately at boot. Such long-running jobs would be subject
to the default 15min timeout, esily triggering it.
Hence, remove this again. In a subsequent commit, introduce per-target
job timeouts instead, that allow us to control these timeouts more
finegrained.
Using "their" as pronoun in these places is confusing since it is more
associated with plural rather than singular, and the sentence already
contains a plural. The word "her/his" apparently offends some people,
hence let's avoid the problem altogether and just name the noun again.
Systemd 209 started setting $WATCHDOG_PID, and sd-daemon watch was
modified to check for this variable. This means that
sd_watchdog_enabled() stopped working with previous versions of
systemd. But sd-event is a public library and API and we must keep it
working even when a program compiled with a newer version of the
libary is used on a system running an older version of the manager.
getenv() and unsetenv() are fairly expensive calls, so optimize
sd_watchdog_enabled() by not calling them when unnecessary.
man: centralize the description of $WATCHDOG_PID and $WATCHDOG_USEC in
the sd_watchdog_enabled manpage. It is better not to repeat the same
stuff in two places.
This new command will ask the journal daemon to flush all log data
stored in /run to /var, and wait for it to complete. This is useful, so
that in case of Storage=persistent we can order systemd-tmpfiles-setup
afterwards, to ensure any possibly newly created directory in /var/log
gets proper access mode and owners.
Clean up the function namespace by renaming the following:
sd_bus_get_owner_uid() → sd_bus_get_name_creds_uid()
sd_bus_get_owner_machine_id() → sd_bus_get_name_machine_id()
sd_bus_get_peer_creds() → sd_bus_get_owner_creds()
I think it is more readable and nicer if everything is in
one table.
Also, describe what the return value, since it seems awkward to
describe the change in behaviour with --quiet before describing
what the default is.
Programs such as OpenVPN may use ask-password for not only retrieving
passwords, but also usernames. Masking usernames with * seems just silly.
v2 - Don't mess with termios flags, instead print the input
instead of an asterix. Resolves issues with backspace
and TAB input.
v3 - Renamed 'do_echo' variables and argument to 'echo'. Also
modified the ask_password_{tty,agent,auto} API instead of
additional wrapper functions.
[zj: undo changes to ask_password_auto, since no callers were using
the new argument.]
Example from Tom Gundersen is included using xi:include.
The copyright notice stands out a bit. Maybe it should be removed,
and the code placed in public domain.
