IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
I suspect the original version of the regex was written on a system,
which prints both the QEMU version and the QEMU package version in the
--version output, like Fedora:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 4.2.1 (qemu-4.2.1-1.fc32)
Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers
However, Arch Linux prints only the QEMU version:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 5.2.0
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
This causes the awk regex to not match the version string, since there's
no whitespace after it, causing the version check to fail (as well as the
TEST-36-NUMAPOLICY) as well.
Follow-up for 43b49470d1.
Upgrading to qemu 5.2 breaks TEST-36-NUMAPOLICY like:
qemu-system-x86_64: total memory for NUMA nodes (0x0) should
equal RAM size (0x20000000)
Use the new (as in >=2014) form of memdev in test 36:
-object memory-backend-ram,id=mem0,size=512M -numa node,memdev=mem0,nodeid=0
Since some target systems are as old as qemu 1.5.3 (CentOS7) but the new
kind to specify was added in qemu 2.1 this needs to add version parsing and
add the argument only when qemu is >=5.2.
Fixes#17986.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Previously, we'd already have explicit logging for the case where
$XDG_RUNTIME_DIR is not set. Let's also add some explicit logging for
the EPERM/ACCESS case. Let's also in both cases suggest the
--machine=<user>@.host syntax.
And while we are at it, let's remove side-effects from the macro.
By checking for both the EPERM/EACCES case and the $XDG_RUNTIME_DIR case
we will now catch both the cases where people use "su" to issue a
"systemctl --user" operation, and those where they (more correctly, but
still not good enough) call "su -".
Fixes: #17901
So far, the bridge always acted as if "--system" was used, i.e. would
unconditionally connect to the system bus. Let's add "--user" too, to
connect to the users session bus.
This is mostly for completeness' sake.
I wanted to use this when making sd-bus's ability to connect to other
user's D-Bus busses work, but it didn't exist so far. In the interest of
keeping things compatible the implementation in sd-bus will not use the
new "--user" switch, and instead manually construct the right bus path
via "--path=", but we still should add the proper switches, as
preparation for a brighter future, one day.
This is unfortunately harder to implement than it sounds. The user's bus
is bound a to the user's lifecycle after all (i.e. only exists as long
as the user has at least one PAM session), and the path dynamically (at
least theoretically, in practice it's going to be the same always)
generated via $XDG_RUNTIME_DIR in /run/.
To fix this properly, we'll thus go through PAM before connecting to a
user bus. Which is hard since we cannot just link against libpam in the
container, since the container might have been compiled entirely
differently. So our way out is to use systemd-run from outside, which
invokes a transient unit that does PAM from outside, doing so via D-Bus.
Inside the transient unit we then invoke systemd-stdio-bridge which
forwards D-Bus from the user bus to us. The systemd-stdio-bridge makes
up the PAM session and thus we can sure tht the bus exists at least as
long as the bus connection is kept.
Or so say this differently: if you use "systemctl -M lennart@foobar"
now, the bus connection works like this:
1. sd-bus on the host forks off:
systemd-run -M foobar -PGq --wait -pUser=lennart -pPAMName=login systemd-stdio-bridge
2. systemd-run gets a connection to the "foobar" container's
system bus, and invokes the "systemd-stdio-bridge" binary as
transient service inside a PAM session for the user "lennart"
3. The systemd-stdio-bridge then proxies our D-Bus traffic to
the user bus.
sd-bus (on host) → systemd-run (on host) → systemd-stdio-bridge (in container)
Complicated? Well, to some point yes, but otoh it's actually nice in
various other ways, primarily as it makes the -H and -M codepaths more
alike. In the -H case (i.e. connect to remote host via SSH) a very
similar three steps are used. The only difference is that instead of
"systemd-run" the "ssh" binary is used to invoke the stdio bridge in a
PAM session of some other system. Thus we get similar implementation and
isolation for similar operations.
Fixes: #14580
So far when asked for augmented bus credentials and the process was
already gone we'd fail fatally. Let's make this graceful instead, and
never allow augmenting fail due to PID having vanished — unless the
augmenting is the explicit and only purpose of the requested operation.
This should be safe as clients have to explicitly query the acquired
creds anyway and handle if they couldn't be acquired. Moreover we
already handle permission problems gracefully, thus clients must be
ready to deal with missing creds.
This is useful to make selinux authorization work for short-lived client
proceses. PReviously we'd augment creds to have more info to log about
(the selinux decision would not be based on augmented data however,
because that'd be unsafe), and would fail if we couldn't get it. Now,
we'll try to acquire the data, but if we cannot acquire it, we'll still
do the selinux check, except that logging will be more limited.
Let's clean up hostname_is_valid() a bit: let's turn the second boolean
argument into a more explanatory flags field, and add a flag that
accepts the special name ".host" as valid. This is useful for the
container logic, where the special hostname ".host" refers to the "root
container", i.e. the host system itself, and can be specified at various
places.
let's also get rid of machine_name_is_valid(). It was just an alias,
which is confusing and even more so now that we have the flags param.
The immediately following container_get_leader() call validate the name
anyway, no need to twice exactly the same way twice immediately after
each other.
Use symlink_atomic_label() instead of symlink_atomic() as the symlink
may need a different label than the parent directory.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
```
❯ ssh sus@xx.xx.xx.xx
Last login: Sat Nov 14 17:32:08 2020 from 10.104.45.138
17:36:19 up 0 min, 0 users, load average: 0.00, 0.00, 0.00
> systemd-analyze blame
Bootup is not yet finished (org.freedesktop.systemd1.Manager.FinishTimestampMonotonic=0).
Please try again later.
Hint: Use 'systemctl list-jobs' to see active jobs
> systemd-analyze blame
43.954s systemd-time-wait-sync.service
1.969s systemd-networkd-wait-online.service
1.559s cloud-init-local.service
1.039s cloud-init.service
414ms cloud-final.service
387ms dracut-initqueue.service
382ms initrd-switch-root.service
380ms cloud-config.service
198ms systemd-journal-flush.service
136ms systemd-udev-trigger.service
115ms initrd-parse-etc.service
97ms systemd-timesyncd.service
84ms systemd-journald.service
```
After made it configurable and set to 5s
```
❯ ssh sus@xx.xx.xx.xx
Last login: Sat Nov 14 18:41:42 2020 from 10.104.45.138
18:42:36 up 0 min, 0 users, load average: 0.16, 0.03, 0.01
> systemd-analyze blame
10.450s systemd-time-wait-sync.service
8.303s systemd-networkd-wait-online.service
1.621s cloud-init-local.service
1.068s cloud-init.service
```
Previous commits changed the dhcpv4 retransmission algorithm to be
slightly slower, changing the amount of time it takes to notify
systemd-networkd that the dhcpv4 configuration has (transiently)
failed from around 14 second up to 28 seconds.
Since the test_dhcp_client_with_ipv4ll_without_dhcp_server test
configures an interface to use dhcpv4 without any operating dhcpv4
server running, it must increase the amount of time it waits for
the test interface to reach degraded state.