(cherry picked from commit 543015a164
)
11 KiB
title | category | layout | SPDX-License-Identifier |
---|---|---|---|
File Descriptor Store | Interfaces | default | LGPL-2.1-or-later |
The File Descriptor Store
TL;DR: The systemd service manager may optionally maintain a set of file descriptors for each service. Those file descriptors are under control of the service. Storing file descriptors in the manager makes is easier to restart services without dropping connections or losing state.
Since its inception systemd
has supported the socket activation
mechanism: the service manager creates and listens on some sockets (and similar
UNIX file descriptors) on behalf of a service, and then passes them to the
service during activation of the service via UNIX file descriptor (short: fd)
passing over execve()
. This is primarily exposed in the
.socket
unit type.
The file descriptor store (short: fdstore) extends this concept, and allows services to upload during runtime additional fds to the service manager that it shall keep on its behalf. File descriptors are passed back to the service on subsequent activations, the same way as any socket activation fds are passed.
If a service fd is passed to the fdstore logic of the service manager it only
maintains a duplicate of it (in the sense of UNIX
dup(2)
), the fd remains
also in possession of the service itself, and it may (and is expected to)
invoke any operations on it that it likes.
The primary use-case of this logic is to permit services to restart seamlessly (for example to update them to a newer version), without losing execution context, dropping pinned resources, terminating established connections or even just momentarily losing connectivity. In fact, as the file descriptors can be uploaded freely at any time during the service runtime, this can even be used to implement services that robustly handle abnormal termination and can recover from that without losing pinned resources.
Note that Linux supports the
memfd
concept
that allows associating a memory-backed fd with arbitrary data. This may
conveniently be used to serialize service state into and then place in the
fdstore, in order to implement service restarts with full service state being
passed over.
Basic Mechanism
The fdstore is enabled per-service via the
FileDescriptorStoreMax=
service setting. It defaults to zero (which means the fdstore logic is turned
off), but can take an unsigned integer value that controls how many fds to
permit the service to upload to the service manager to keep simultaneously.
If set to values > 0, the fdstore is enabled. When invoked the service may now
(asynchronously) upload file descriptors to the fdstore via the
sd_pid_notify_with_fds()
API call (or an equivalent re-implementation). When uploading the fds it is
necessary to set the FDSTORE=1
field in the message, to indicate what the fd
is intended for. It's recommended to also set the FDNAME=…
field to any
string of choice, which may be used to identify the fd later.
Whenever the service is restarted the fds in its fdstore will be passed to the
new instance following the same protocol as for socket activation fds. i.e. the
$LISTEN_FDS
, $LISTEN_PIDS
, $LISTEN_FDNAMES
environment variables will be
set (the latter will be populated from the FDNAME=…
field mentioned
above). See
sd_listen_fds()
for details on receiving such fds in a service. (Note that the name set in
FDNAME=…
does not need to be unique, which is useful when operating with
multiple fully equivalent sockets or similar, for example for a service that
both operates on IPv4 and IPv6 and treats both more or less the same.).
And that's already the gist of it.
Seamless Service Restarts
A system service that provides a client-facing interface that shall be able to seamlessly restart can make use of this in a scheme like the following: whenever a new connection comes in it uploads its fd immediately into its fdstore. At appropriate times it also serializes its state into a memfd it uploads to the service manager — either whenever the state changed sufficiently, or simply right before it terminates. (The latter of course means that state only survives on clean restarts and abnormal termination implies the state is lost completely — while the former would mean there's a good chance the next restart after an abnormal termination could continue where it left off with only some context lost.)
Using the fdstore for such seamless service restarts is generally recommended
over implementations that attempt to leave a process from the old service
instance around until after the new instance already started, so that the old
then communicates with the new service instance, and passes the fds over
directly. Typically service restarts are a mechanism for implementing code
updates, hence leaving two version of the service running at the same time is
generally problematic. It also collides with the systemd service manager's
general principle of guaranteeing a pristine execution environment, a pristine
security context, and a pristine resource management context for freshly
started services, without uncontrolled "leftovers" from previous runs. For
example: leaving processes from previous runs generally negatively affects
lifecycle management (i.e. KillMode=none
must be set), which disables large
parts of the service managers state tracking, resource management (as resource
counters cannot start at zero during service activation anymore, since the old
processes remaining skew them), security policies (as processes with possibly
out-of-date security policies – SElinux, AppArmor, any LSM, seccomp, BPF — in
effect remain), and similar.
File Descriptor Store Lifecycle
By default any file descriptor stored in the fdstore for which a POLLHUP
or
POLLERR
is seen is automatically closed and removed from the fdstore. This
behavior can be turned off, by setting the FDPOLL=0
field when uploading the
fd via sd_notify_with_fds()
.
The fdstore is automatically closed whenever the service is fully deactivated and no jobs are queued for it anymore. This means that a restart job for a service will leave the fdstore intact, but a separate stop and start job for it — executed synchronously one after the other — will likely not.
This behavior can be modified via the
FileDescriptorStorePreserve=
setting in service unit files. If set to yes
the fdstore will be kept as long
as the service definition is loaded into memory by the service manager, i.e. as
long as at least one other loaded unit has a reference to it.
The systemctl clean --what=fdstore …
command may be used to explicitly clear
the fdstore of a service. This is only allowed when the service is fully
deactivated, and is hence primarily useful in case
FileDescriptorStorePreserve=yes
is set (because the fdstore is otherwise
fully closed anyway in this state).
Individual file descriptors may be removed from the fdstore via the
sd_notify()
mechanism, by sending an FDSTOREREMOVE=1
message, accompanied
by an FDNAME=…
string identifying the fds to remove. (The name does not have
to be unique, as mentioned, in which case all matching fds are
closed). Generally it's a good idea to send such messages to the service
manager during initialization of the service whenever an unrecognized fd is
received, to make the service robust for code updates: if an old version
uploaded an fd that the new version doesn't recognize anymore it's good idea to
close it both in the service and in the fdstore.
Note that storing a duplicate of an fd in the fdstore means the resource pinned
by the fd remains pinned even if the service closes its duplicate of the
fd. This in particular means that peers on a connection socket uploaded this
way will not receive an automatic POLLHUP
event anymore if the service code
issues close()
on the socket. It must accompany it with an FDSTOREREMOVE=1
notification to the service manager, so that the fd is comprehensively closed.
Access Control
Access to the fds in the file descriptor store is generally restricted to the
service code itself. Pushing fds into or removing fds from the fdstore is
subject to the access control restrictions of any other sd_notify()
message,
which is controlled via
NotifyAccess=
.
By default only the main service process hence can push/remove fds, but by
setting NotifyAccess=all
this may be relaxed to allow arbitrary service
child processes to do the same.
Soft Reboot
The fdstore is particularly interesting in soft
reboot
scenarios, as per systemctl soft-reboot
(which restarts userspace like in a
real reboot, but leaves the kernel running). File descriptor stores that remain
loaded at the very end of the system cycle — just before the soft-reboot – are
passed over to the next system cycle, and propagated to services they originate
from there. This enables updating the full userspace of a system during
runtime, fully replacing all processes without losing pinning resources,
interrupting connectivity or established connections and similar.
This mechanism can be enabled either by making sure the service survives until
the very end (i.e. by setting DefaultDependencies=no
so that it keeps running
for the whole system lifetime without being regularly deactivated at shutdown)
or by setting FileDescriptorStorePreserve=yes
(and referencing the unit
continuously).
For further details see Resource Pass-Through.
Initrd Transitions
The fdstore may also be used to pass file descriptors for resources from the initrd context to the main system. Restarting all processes after the transition is important as code running in the initrd should generally not continue to run after the switch to the host file system, since that pins backing files from the initrd, and the initrd might contain different versions of programs than the host.
Any service that still runs during the initrd→host transition will have its fdstore passed over the transition, where it will be passed back to any queued services of the same name.
The soft reboot cycle transition and the initrd→host transition are semantically very similar, hence similar rules apply, and in both cases it is recommended to use the fdstore if pinned resources shall be passed over.
Debugging
The
systemd-analyze
tool may be used to list the current contents of the fdstore of any running
service.
The
systemd-run
tool may be used to quickly start a testing binary or similar as a service. Use
-p FileDescriptorStoreMax=4711
to enable the fdstore from systemd-run
's
command line. By using the -t
switch you can even interactively communicate
via processes spawned that way, via the TTY.