IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The actual default CPU at the QEMU level is often a relatively
poor choice, which is stuck with just baseline functionality
and can sometimes not run modern guests at all.
Whenever possible, prefer maximum mode for a much nicer out of
the box experience.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This mode has been introduced in libvirt 7.1.0 (March 2021) and
can be already used today with
--cpu mode=maximum
This is however slightly inconvenient to type and is not
consistent with the special treatment that the other modes
(host-passthrough, host-model) get.
Introduce a proper special mode for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tells virt-install to not use UEFI, if it would normally default
to it.
This likely isn't too useful in practice, since all occasions we
default to UEFI require it. But it future proofs opt out in case
we ever start defaulting to UEFI in cases where BIOS still works.
Resolves: https://github.com/virt-manager/virt-manager/issues/692
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The way `--boot uefi` is implemented allows a value to be passed,
but the value is completely ignored. So `--boot uefi=off` or
`--boot uefi=FOOBAR` is treated the same as `--boot uefi`
Lets fix this by making `--boot uefi` and `--boot uefi=on` the same,
`--boot uefi=off` will be implemented later, but any other value
throws an error. This is technically an CLI break but I don't
think it's anything to worry about
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Input XML can have non-existent disk images as long as `--preserve`
is used, or those disks are skipped for any reason. We already
handle that correctly in some cases, but others we fail. This
covers another one.
Resolves: https://github.com/virt-manager/virt-manager/issues/563
Signed-off-by: Cole Robinson <crobinso@redhat.com>
--reflink only works with raw images, since copying anything else
will hit the qemu-img code path in libvirt storage driver.
This can pop up more nowadays since UEFI support is using qcow2 as
well.
Let's only attempt --reflink for raw disk images. It's basically
an optimization anyways
https://bugzilla.redhat.com/show_bug.cgi?id=2256285
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The commit 6baa327d added active_pcr_banks support, but put it under the child
element <tpm>, which is wrong, It should be under sub child element <backend>.
Before:
--tpm model=tpm-tis,backend.type=emulator,backend.version=2.0,\
active_pcr_banks.sha1=on,\
active_pcr_banks.sha256=yes,\
active_pcr_banks.sha384=yes,\
active_pcr_banks.sha512=yes
It results in the following domain xml:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
<alias name='tpm0'/>
</tpm>
After:
--tpm model=tpm-tis,backend.type=emulator,backend.version=2.0,\
backend.active_pcr_banks.sha1=on,\
backend.active_pcr_banks.sha256=yes,\
backend.active_pcr_banks.sha384=yes,\
backend.active_pcr_banks.sha512=yes
It results in the following domain xml:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'>
<active_pcr_banks>
<sha1/>
<sha256/>
<sha384/>
<sha512/>
</active_pcr_banks>
</backend>
<alias name='tpm0'/>
</tpm>
Signed-off-by: Lin Ma <lma@suse.de>
E.g.
virt-install \
... \
--tpm model=tpm-tis,backend.type=emulator,backend.version=2.0,\
backend.source.type=dir,backend.source.path=/some/dir
It results in the following domain xml:
<backend type="emulator" version="2.0">
<source type="dir" path="/some/dir"/>
</backend>
Signed-off-by: Lin Ma <lma@suse.de>
E.g.
virt-install \
... \
--tpm model=tpm-tis,backend.type=emulator,backend.version=2.0,backend.debug=3
It results in the following domain xml:
<tpm model="tpm-tis">
<backend type="emulator" version="2.0" debug="3"/>
</tpm>
Signed-off-by: Lin Ma <lma@suse.de>
E.g.
virt-install \
... \
--sound model=virtio,streams=4
It results in the following domain xml:
<sound model="virtio" streams="4"/>
Signed-off-by: Lin Ma <lma@suse.de>
E.g.
virt-install \
... \
--sound model=usb,multichannel=yes
It results in the following domain xml:
<sound model="usb" multichannel="yes"/>
Signed-off-by: Lin Ma <lma@suse.de>
E.g.
virt-install \
... \
--disk /tmp/disk0.qcow2,size=16,driver.type=qcow2,blockio.discard_granularity=4096
It results in the following domain xml:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' discard='unmap'/>
<source file='/tmp/disk0.qcow2'/>
<target dev='vda' bus='virtio'/>
<blockio discard_granularity="4096"/>
</disk>
Signed-off-by: Lin Ma <lma@suse.de>
This is a special convenience option for filling in `type=hostdev`
config using the same format of lookup string that can be
passed to `--hostdev`
Fixes: https://github.com/virt-manager/virt-manager/issues/500
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This just covers the common PCI case with these new options
source.address.type=
source.address.domain=
source.address.bus=
source.address.slot=
source.address.function=
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is essentially what it has always behaved as, but making it
explicit in the code will now trigger the extra warnings when
detect=on is also used.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Using `detect=on,name=OSNAME` is good for CI safety, incase
a new distro tree has a regression with detection, or if testing
against a new distro that osinfo-db doesn't know about.
But virt-install should still try to inform the user that detection
failed, and suggest filing a bug if the user expected it to work.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The require= behavior should be AUTO for this case, but the
way we were previously initializing variables made this OFF.
I don't think this was intentional. We should have changed
this when we started defaulting to `detect=on`
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This wires up the guest.convert_to_vnc function to command line,
and documents it.
There's one suboption `qemu-vdagent=on|off`, defaulting to `off`
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Wire up guest.convert_to_q35 to the CLI. We add one suboptions,
`num_pcie_root_ports=X`, matching the pre-existing
`--controller num_pcie_root_ports=X` option
Nothing fancy here. See man page docs for details
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We can make `--xml` fit the common xml cli option paradigm, which
less us drop a whole bunch of special handling in virt-xml
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Libvirt enables blob resources for the virtio video device since 9.2.0.
It accelerates the display path due to less or no copying of pixel data.
E.g.
virt-install \
... \
--video model.type=virtio,blob=on
It results in the following domain xml:
<video>
<model type="virtio" blob="on"/>
</video>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Lin Ma <lma@suse.de>
Set kvm pv-ipi feature by --features argument.
E.g. virt-install --features kvm.pv-ipi.state=off
It results in the following domain xml:
<features>
<kvm>
<pv-ipi state='off'/>
</kvm>
</features>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Lin Ma <lma@suse.de>
This has ambiguous volume labels that will match multiple
osinfo output:
$ osinfo-detect -a tests/data/fakemedia/fake-win-multi.iso
Media is bootable.
Generated by editing `fake-win7.iso` already in tree
$ xorriso -indev fake-win7.iso -outdev test.iso \
-boot_image isolinux keep \
-volid SSS_X64CHK_ -volset_id SSS_X64CHK_
Add a simple test case that confirms _some_ os was detected,
and virt-install doesn't totally choke on it
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Tweak the test case added in ba3a098c3b
to test XML generation instead, to make sure nothing regresses
weirdly there.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Examples:
`virt-xml MYVM --add-device --sound FOO1 --sound FOO2` is not rejected
and will add 2 devices.
`virt-xml MYVM --remove-device --sound opt1=FOO1 --sound opt2=FOO2`
is not rejected, only the final `--sound` option is used.
`virt-xml MYVM --edit --sound FOO1 --sound address.type=BAR` is not
rejected. The commandlines will effectively be squashed
`--sound` can be any XML option, but trying to mix and match
options like `--sound` and `--disk` is always rejected.
These bits are unexpected and undocument, but have been around since
the beginning of virt-xml.
I can see us breaking compat on these in the future (particularly the
--remove-device bit), but that would need to be an explicit decision,
and announced appropriately. In the mean time, we should be testing
this so it doesn't accidentally regress.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This reverts b34ae0d0c8 and
1fef5d8661.
Playing with this some more I found some deeper problems. For example
```console
[:~/src/virt-manager] (main) $ ./virt-xml test-for-virtxml --connect test://`pwd`/tests/data/testdriver/testsuite.xml --print-diff --edit 1 --video model=FOO --edit 2 --sound model=BAR
--- Original XML
+++ Altered XML
@@ -180,14 +180,14 @@
<graphics type="vnc" port="-1" autoport="yes">
<listen type="address"/>
</graphics>
- <sound model="sb16"/>
+ <sound model="BAR"/>
<sound model="es1370"/>
<sound model="ich6"/>
<video>
<model type="vmvga" vram="16384" heads="1" primary="yes"/>
</video>
<video>
- <model type="cirrus" vram="16384" heads="3"/>
+ <model type="FOO" vram="16384" heads="3"/>
</video>
<hostdev mode="subsystem" type="usb" managed="yes">
<source>
```
There's other weirdness too, though it's mostly strange plays on previous weird behavior
* `--edit --video model=vga --edit --sound model=ich9 --video model=qxl` works
* `--add-device --sound model=foo --video model=bar` was previously rejected but now works
* `--remove-device --video model=vmvga --sound model=sb16` was previously rejected by now works
Fixing all this is not trivial. So I think we need to revert and go back to the drawing board.
