IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Function to walk all leases for a file exactly once. This used to be simpler
with the leases[] array, thus this function that encapsulates the complexity.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Simple refactoring into simpler routines. View best with "git show -b"
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
This is an interim function supposed to be around for just a few patches as
long as we have both the leases.tdb entries and the leases[] in
share_mode_entries around. It makes it easier to transition to just use
leases.tdb while keeping the code running.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
The only reason for grant_fsp_lease to return the lease_idx was to pass it down
to set_share_mode. That does not need it anymore.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Temporary patch to keep the code running. The new code in set_share_mode() will
leave again once the patchset to remove share_mode_lease and thus the lease_idx
in share_mode_entry goes away.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
This was the last "share_mode_lease" reference in this function, remove
variable "l".
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Instead of indexing into the leases[] array, put the lease_db reference into
the share_mode_entry. For simplicity, put in the client guid as well. We
*might* be able to retrieve that from somewhere else, but as other smbd
processes have to look at the lease values, put in the full leases_db index
data.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Whenever we update the share_mode_lease struct, also update the leases.tdb
entry.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
This is the data stored in share_mode_lease inside the leases[] array in
locking.tdb. This and all the following patches move all leases array to
looking at the leases.tdb.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Why? I am preparing a patchset that will remove
"share_mode_lease". This patch is a micro-step towards that, removing
a set of references to this struct.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
We don't need to memzero the struct when we can struct-initialize it a
bit later, implicitly initializing the rest to zero.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Apr 12 20:42:27 UTC 2019 on sn-devel-144
It's already inherited from .shared_template.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
libcephfs disables ACL support by default and returns -EOPNOTSUPP in the
POSIX ACL get/setxattr paths as a result. Enable support by setting the
following Ceph config parameters during mount:
client acl type = posix_acl
fuse default permissions = false
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13896
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13895
In run_proc, there was an implicit assumption that when a process exits,
fd event (pipe between parent and child) would be processed first and
signal event (SIGCHLD for the child) would be processed later.
However, that is not the case. SIGCHLD can be received asynchronously
any time even when the pipe data has not fully been read. This causes
run_proc to miss some of the output from child process in tests.
When SIGCHLD is being processed, if the pipe between parent and child is
still open, then do an explict read from the pipe to ensure we read any
data still in the pipe before closing the pipe.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Apr 12 08:19:29 UTC 2019 on sn-devel-144
We also can not assume that nodes can be marked as connected via only
the keepalive mechanism. Keepalives are not sent to disconnected
nodes so, in the absence of other packets (e.g. broadcasts), 2 nodes
may never become marked as connected to each other.
Revert to marking nodes as connected in the TCP transport code. If a
connection is to a non(-operational) ctdbd then it will revert to
disconnected after a short while and may actually flap. This should
be rare.
This reverts commit 66919db3d7.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13888
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
I thought this was being triggered during automated testing.
However, it appears that a poor choice of fixed ports for NFS RPC
services was the real problem. Revert, since the original behaviour
may be useful.
This reverts commit f1a1c300e1.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is needed because the name of the autobuild job and
the name of the selftest env end up in the socket path
for ncalrpc sockets.
The challenge is that (for example)
/memdisk/autobuild/fl/b2424063/samba-schemaupgrade/bin/ab/schemaupgrade_pair_dc/ncalrpc/np/protected_storage
does not fit in a struct sockaddr_un.
Signed-off-by: Garming Sam <garming@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Apr 12 05:41:36 UTC 2019 on sn-devel-144
These are called flags because that is what they become to the ndr_pull function,
but to avoid total confusion treat them as flags generally even if the values are
always exclusive (at the moment).
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
There's no need for the local variables as the NDR call structure
pointer is kept around anyway.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We have the ldb_kv in the caller, just fill it into the context and
so avoid the cost of the talloc_get_type().
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
That's a wrapper that only smbstatus and net status use by now.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Apr 12 00:37:05 UTC 2019 on sn-devel-144
This check was supposed to be removed by c9f4b92a61.
Signed-off-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Thu Apr 11 23:34:51 UTC 2019 on sn-devel-144
The new string conversion wrappers detect and flag errors
which occured during the string to integer conversion.
Those modifications required an update of the callees
error checks.
Signed-off-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
