IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts commit bd30c9c128.
While this does indeed slightly simplify code, it simplifies too much: Soon we
will need filename_convert_dirfsp_nosymlink raw without looking at
UCF_LCOMP_LNK_OK. So in hindsight this went too far.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
OPEN_REPARSE_POINT will trigger symlinks not being followed but
returned, even if we have "follow symlinks = yes". Prepare for setting
UCF_LCOMP_LNK_OK for this case in a central place.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Looks more complex, but this avoids calling openat_pathref_fsp, which
eventually calls into non_widelink_open(). We need to open the pretty paranoid
SMB_ASSERT in openat_pathref_fsp_lcomp() a little bit.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Soon we'll have a caller that needs the last component as a relative
file name. Make sure it does not have to call get_lcomp or so.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Unused so far, but soon we'll call this routine with a basedir that's
somewhere below the share root.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
If we do the S_ISLNK check in the lower level, the if-condition is
simpler and we get the close_file_free() call for free.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Only temporary, next step is a new more general symlink_target_path
routine, we'll need that in libcli/smb as well.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
We have the same information available via conn_using_smb2()
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <mschwenke@ddn.com>
We have the reserved field unparsed_path_length as part of struct
symlink_reparse_struct.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Will make generalized handling of reparse point error returns easier
once we will also allow creating symlink reparse point files over smb.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Existing caller passes NULL, no change in behaviour. Prepares for
replacing symlink_target_below_conn() in open.c.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15549
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Moves creating the symlink target path via symlink_target_path() to the
caller. This prepares for using this in non_widelink_open(), where it will
replace symlink_target_below_conn() with the same functionality.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15549
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Bug: https://bugzilla.samba.org/show_bug.cgi?id=15544
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Jan 2 20:37:01 UTC 2024 on atb-devel-224
This is more lines of code, but it's still a simplification. With this
patch we don't call the full openat_pathref_fsp() anymore when looking
up the last component in filename_convert_dirfsp(), instead we do the
direct SMB_VFS_OPENAT(). We don't need the whole complexity of
non_widelink_open() for this case, we do know that we have a real
non-cwd dirfsp.
The other big change that is not obvious just from looking at the
patch: This removes the special case for looking up posix
symlinks. Before this patch, filename_convert_dirfsp() returned a
proper smb_filename but without an attached fsp when a smb1 posix
client hits a symlink. This caused all sorts of special case code
everywhere. For example smbd_do_qfilepathinfo() needs to cover both
cases just for the smb1 posix symlink case. This special-case handling
can go now. We can do the path lookup in the smb1-only qpathinfo code
and call into the common code with a proper fsp.
When hitting a symlink and with O_PATH available, we'll get the
symlink opened with an O_PATH fd. Without O_PATH we obviously can't do
that, there we get fd=-1 and an indication that we don't have the
procfd fallback around.
Why all this?
I want to present FIFOs (and eventually symlinks) as reparse points as
the very next step. Without this patch, there is no real unified way
to get the file attributes from disk. Now we can use the proper logic
of fdos_mode() everywhere and not rely on special cases for fsp==NULL.
This patch also changes some error codes for smb1 posix extensions. I
chose to just change the test instead of going after each and every
change. As long as we do get an error, I'm willing to accept that we
slightly change error path behaviour for this deprecated code.
And, I tried to split this up into smaller patches but I failed.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Right now this is handled in openat_pathref_fsp(), but this will
change soon.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
filename_convert_dirfsp() is the only caller of
safe_symlink_target_path(). Right now this is not called with
"unparsed==0" because the last component is handled in
openat_pathref_fsp() and thus non_widelink_open(). I have code that
will change this, so that we can simplify
openat_pathref_fsp_case_insensitive() to directly call OPENAT, not
going through non_widelink_open. This will cause
safe_symlink_target_path() also be called for the last component,
which means it needs logic to distinguish between PATH_ and
NAME_NOT_FOUND.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Don't lose information returned from openat_pathref_fsp_nosymlink()
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Untested code is broken code... previous_slash() did not return a
pointer to the slash but after it. This went undetected because so far
we never call symlink_target_path() with "unparsed==0". Once we
started doing that, we would find that the "unparsed==0" case actually
puts parent on the "previous slash", not the character behind it.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The goal of this is to eventually remove reparse_symlink.c once we
have marshalling routines for symlinks in reparse.c
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Turn it into openat_pathref_fsp_nosymlink() which opens not only
directories but normal files and symlinks too. If it finds a symlink,
return NT_STATUS_STOPPED_ON_SYMLINK and all the metadata we can find:
struct stat_ex plus the symlink target.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Nobody used that anymore, most callers had passed in NULL anyway.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Nobody does anything with this anymore, we just call ReadDirName() in
sequence or do a RewindDir(). So we don't have to look at offsets as
given by the file system anymore.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The problem is when checking for vetoed names on the last path component in
openat_pathref_fsp_case_insensitive() we return
NT_STATUS_OBJECT_NAME_NOT_FOUND. The in the caller
filename_convert_dirfsp_nosymlink() this is treated as the "file creation case"
causing filename_convert_dirfsp_nosymlink() to return NT_STATUS_OK.
In order to correctly distinguish between the cases
1) file doesn't exist, we may be creating it, return
2) a vetoed a file
we need 2) to return a more specific error to
filename_convert_dirfsp_nosymlink(). I've chosen NT_STATUS_OBJECT_NAME_INVALID
which gets mapped to the appropriate errror NT_STATUS_OBJECT_PATH_NOT_FOUND or
NT_STATUS_OBJECT_NAME_NOT_FOUND depending on which path component was vetoed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15143
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Apr 6 23:03:50 UTC 2023 on atb-devel-224
When open_stream_pathref_fsp() returns
NT_STATUS_OBJECT_NAME_NOT_FOUND, smb_fname_rel->fsp
has been set to NULL, so we must free base_fsp separately
to prevent fd-leaks when opening a stream that doesn't
exist.
Remove knownfail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=15314
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Mar 3 16:37:27 UTC 2023 on atb-devel-224
This will be used in the future to also open symlinks as reparse
points, so this won't be specific to only SMB1 posix extensions.
I have tried to avoid additional flags for several weeks by making
openat_pathref_fsp or other flavors of this to always open fsp's with
symlink O_PATH opens, because I think NT_STATUS_OBJECT_NAME_NOT_FOUND
with a valid stat is a really bad and racy way to express that we just
hit a symlink, but I miserably failed. Adding additional flags (another one
will follow) is wrong, but I don't see another way right now.
Signed-off-by: Volker Lendecke <vl@samba.org>
Factor out the symlink-case into a more obvious if-statement with less
indentation.
Review with git show -b
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Don't do the get_real_filename() retry if we're in posix context of if
the connection is case sensitive.
The whole concept of case sensivity blows my brain. In SMB1 without
posix extensions it's a per-request thing. In SMB2 without posix
extensions this should just depend on "case sensitive = yes/no", and
in future SMB2 posix extensions this will become a per-request thing
again, depending on the existence of the posix create context.
Then there are other semantics that are attached to posix-ness, which
have nothing to do with case sensivity. See for example merge request
2819 and bug 8776, or commit f0e1137425. Also see
check_path_syntax_internal().
This patch uses the same flags as openat_pathref_fsp_case_insensitive()
does, but I am 100% certain this is wrong in a subtle way.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Thu Dec 15 11:30:04 UTC 2022 on sn-devel-184
We further down call filename_convert_dirfsp(), which also has this
call. No need to copy that code here as well.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Small refactoring to make filename_convert_dirfsp() itself a bit
shorter using a subroutine.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is recent enough to justify just a README.Coding formatting change
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
