IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This makes the function compatible with parse_debug().
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This allows for backward compatibility with the current code where
DEBUG_ERR corresponds to "ERR".
Fix the test that relies on "ERR" instead of "ERROR".
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This variable is used for adding a prefix to log entries from various
child processes.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
These functions are only used in the ctdb daemon code.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This function can only called from ctdb daemon.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Nov 14 00:39:17 CET 2015 on sn-devel-104
Removes accessor functions as now this parameter is set
under user control in smb.conf. Default is 100.
Note that this doesn't limit the number of outstanding
aio requests, it just causes them to go onto the
pthreadpool queue.
Now we need to prioritize pthreadpool pipe replies
ahead of incoming SMB2 requests, but that's a patch
for another day.
Based on ideas from Volker.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Rely on pthreadpool queueing instead of falling back.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
"idmap config DOMAIN : OPTION" is the pattern used.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Fri Nov 13 19:55:33 CET 2015 on sn-devel-104
This enables the codepaths calling fsync for FLUSH requests during
selftest.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Fri Nov 13 04:47:00 CET 2015 on sn-devel-104
SMB2 FLUSH mainly calls fsync and there is already code in place to
handle fsync asynchronously, so use the asynchronous code path for SMB2
FLUSH. This avoids a SMB2 FLUSH stalling other requests processing.
Signed-off-by: Christof Schmitt <cs@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org>
Guenther
Signed-off-by: Günther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Nov 13 01:43:36 CET 2015 on sn-devel-104
This is currently done before each IP takeover run, so just factor it
in.
ctdb_reload_remote_public_ips() becomes static.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Nov 12 09:28:45 CET 2015 on sn-devel-104
This will help to untangle known and available public IP lists from
the CTDB context.
verify_remote_ip_allocation() needs a forward declaration.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Remote IP validation is only called when a takeover run is about to
happen anyway, so don't bother flagging one. Given that a takeover
run isn't being triggered, also drop the test that checks if takeover
runs are disabled. These are the only uses of the rec argument, so
drop it.
One possible further simplification would be to remove this function
because it doesn't accomplish anything. However, it is worth leaving
it as a reminder that remote IP validation should be done properly at
some time in the future.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It is only used by the caller to print a message that includes the
culprit. However, ctdb_reload_remote_public_ips() already prints
perfectly good messages and they include the culprit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
No need to do it immediately. It will happen in less than a second.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is not a recovery, so do not run "startrecovery and "recovered"
events. There are other IP takeover runs where these are not run.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The recovery start/end times used in the checks at the top of
verify_local_ip_allocation() are set by the START_RECOVERY and
END_RECOVERY controls. A couple of takeover runs escape the checks
because they were added later and are not surrounded by these
controls.
Recovery and IP allocation need to be untangled from each other, so
recovery-related events should not be relied on for IP allocation.
This means the solution is not to add these where they are "missing".
The concern that the checks are addressing is to avoid local IP
verification when IP addresses are in a state of flux. Takeover runs
on non-master nodes are already disabled while a takeover run is in
progress, so local IP verification is already skipped in that case.
The other case is the master node, which will be busy with the
takeover run, rather than running main_loop().
The other issue is races. verify_local_ip_allocation() takes a
non-zero amount of time to fetch IP addresses from the local CTDB
daemon and during this time a recovery or takeover run can start, but
a takeover run can still be triggered. The current tests do not stop
this.
Apart from all of this, with most reasonable public IP address
configurations, an extra takeover run will be a no-op so is not a
cause for concern.
It is safe to drop these checks.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
As per Simo's comments in https://bugzilla.redhat.com/show_bug.cgi?id=1279249
we need Samba to return the correct thing to the client when gss_accept_sec_context
returns a token along with an error.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11592
Signed-off-by: Richard Sharpe <rsharpe@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Nov 12 01:44:08 CET 2015 on sn-devel-104
Commit 3ddd35142ab86de431d00f93de2fb6a2b371317d tries to
unconditionally install pre-built manpages if xsltproc is unavailable.
However, these only exist in a tarball, not in a git repo. That can
make the installation fail.
If xsltproc does not exist then check for each pre-built manpage at
configure time. This should cover all the possible cases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Nov 11 06:23:48 CET 2015 on sn-devel-104
cunit/comm_test_002.sh requires that the comm_server_test is started
before comm_client_test. Since comm_server_test is started in background,
it's possible for comm_client_test to run before comm_server_test has
bound to the unix domain socket.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Holger Hetterich told me in a personal email that he does not have
time to care about this project anymore and that he is fine to
remove it from Samba.
Why the removal? It contains homegrown crypto that would need to
be thoroughly audited and/or fixed. And if it's neither maintained
nor widely used I'd rather have it removed.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Nov 11 00:23:35 CET 2015 on sn-devel-104
Recent changes (b542ce7db394de3023b95288b0c40c4533c02cb1) to serverid
code made serverid_exists() call messaging_dgm_get_unique() which means
we depend on a valid messaging context that initializes
global_dgm_context.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
clang complains that '\0' is converted to a NULL pointer. This seems
to work fine, so make this pointer explicitly NULL. If instead we
need a "" here, we could of course do that too.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Nov 10 10:13:18 CET 2015 on sn-devel-104
The include paths for CTDB are set via ctdb/wscript.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Nov 9 14:31:24 CET 2015 on sn-devel-104
The tmpfs is mounted and unmounted by ctdbd_wrapper. Format is
CTDB_DBDIR=tmpfs:<tmpfs-options>. The only default for the tmpfs is
mode=700 - to override, specify a different value in <tmpfs-options>.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Nov 9 10:58:32 CET 2015 on sn-devel-104
