IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is needed due to bd39b91ad12fd05271a7fced0e6f9d8c4eba92e6.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 92f8e31f6995836b1668639a4dac2862efee269a)
This matches the new "LCP2PublicIPs" tunable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 0680437bf5f02aeaed6387370e58bbdba2c04f28)
The startup event intends to mark interfaces up. However, it doesn't
actually do that because $INTERFACES is empty.
This uses the function get_all_interfaces() to list the
interfaces... and then mark them up.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit fc62bf0975c6059ee467285565d0dc3b4daaf238)
Interfaces are currently marked down. Mark them up instead, as per
the comment... and discussion with Ronnie.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 35942841229cc72ce363a7236aec708f1a33136b)
Move existing interface listing code to new function in preparation
for using it in startup event.
While we're here change the "sort | uniq" into "sort -u" and save some
complexity.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit cd1442531ad079b11c60f46ee9d34f5104bef219)
* sed can read files, it doesn't need a file piped to it
* use $() subshells instead of `` - they seem to quote better in dash
* tweak the uniquifying code so that it is easier to read
* add comments
* remove some extraneous semicolons at ends of lines
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 5f49537889a92c3cb68d9203912188bedf00ecd4)
This effectively reverts 953dbfbddad656a64e30a6aca115cb1479d11573 and
is a policy decision.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 380c9263eb37db5a250264316e250c2160908263)
Change most of the uppercase variable names to lowercase for
consistency with other variables, readability and so they can be
easily distinguished from environment/configuration variables. Change
the name of 2 of the variabless to add some clarity. Changes are as
follows:
INTERFACES -> all_interfaces
IFACES -> ctdb_interfaces
IFACE -> iface
I -> i
REALIFACE -> realiface
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 7b201c1087b1433cfbc95de76cb4205e484ccd6f)
The logic in the monitor event itself is very complex. Nearly all of
it can go away by adding a single check of
$CTDB_PARTIALLY_ONLINE_INTERFACES to the return logic of
monitor_interfaces() and reversing the sense of the corresponding
check.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit fa93177442c65c2a4eb2d5d5dba0a0da1c486969)
The name of variable $ok gives no clue to its meaning/use so this
changes that variable to be named $up_interfaces_found.
The return logic relating to $ok and $fail is difficult to read, so
these variables are given true/fale values, allowing the return logic
to be simplified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 3402930319d462eab5525410f6a676952e120182)
The same few lines of logic are used every time an interface up or down.
This encapsulates those few lines in 2 new functions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit ab443c4d7d282f282792abc6a6ac224ab06abe30)
We reduce the number of failures before attempting a restart.
However, after 6 failures we mark the cluster unhealthy and no longer
try to restart. If the previous 2 attempts didn't work then there
isn't any use in bogging the system down with an attempted restart on
every monitor event.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit f654739080b40b7ac1b7f998cacc689d3d4e3193)
This adds a helper function called nfs_check_rpc_service() and uses it
to make the monitor event much more readable. An example of usage is
as follows:
nfs_check_rpc_service "mountd" \
-ge 10 "verbose restart:b unhealthy" \
-eq 5 "restart:b"
The first argument to nfs_check_rpc_service() is the name of the RPC
service to be checked. The RPC service corresponding to this command
is checked for availability using the rpcinfo command. If the service
is available then the function succeeds and subsequent arguments are
ignored.
If the rpcinfo check fails then a failure counter for that particular
RPC service is incremented and subsequent arguments are processed in
groups of 3:
1. An integer comparison operator supported by test.
2. An integer failure limit.
3. An action string.
The value of the failure counter is checked using (1) and (2) above.
The first check that succeeds has its action string processed - note
that this explains the somewhat curious reverse ordering of checks.
It the example above:
* If the counter is >= 10 then a verbose message is printed
describing the failure, the service is restarted in the background
and the node is marked as unhealthy (via an "exit 1" from the
function).
* If the counter is == 5 then the service us restarted in the
background.
For more action options please see the code.
This also changes the ctdb_check_rpc() function so that it no longer
takes a program number to check. It now just takes a real RPC program
name that rpcinfo can resolve via /etc/rpc.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 9b66057964756a6245bafb436eb6106fb6a2866e)
Commit 35a60a63a9b5c7d98dde514ae552239506b691c9 introduced a
regression, reported by "Jonathan Buzzard" <J.Buzzard@dundee.ac.uk>,
as follows:
Basically the use of sed in the following code snippet does not work
for long exports where exportfs wraps the host or network onto the
next line.
exportfs | grep -v '^#' | grep '^/' |
sed -e 's/[[:space:]]*[^[:space:]]*$//' |
ctdb_check_directories
The result is that the you get lots of blank lines being sent to
ctdb_check_directories which causes the host to be marked as
unhealthy and then thrashing sets in of the managed IP's making the
whole cluster unusable.
This tightens up the sed expression so that it is less likely to
produce a spurious empty line. It also removes an unnecessary "grep -v".
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit bd39b91ad12fd05271a7fced0e6f9d8c4eba92e6)
This means that it now occurs on every reconfigure event. As a result
the ipreallocated event is removed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit c45a89418ba733ff91d48340d72bdb6d2ef80051)
* Make this function applicable to "ipreallocated" event too.
* Monitor event should not always succeed just because we reconfigure.
If the service was unhealthy before the reconfigure and we end the
reconfigure with "exit 0" then we can cause the node's health status
to flip-flop.
To avoid this we return the status of the service from the previous
monitor event.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 21dfcbbdccd906fcd6ab7bba81418ce565bf63aa)
Samba doesn't need to do anything for configuration changes. It will
notice configuration changes and reload automatically.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit de13350c17261032a7468c2cf4d2cf4a8d66a840)
* Reduce the failure counts so that restart attempts happen sooner.
* Use service_start() and service_stop() for the restart.
ctdb_service_start() resets the failure count, which isn't very
useful in this context.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 01776b9f29af9ad5c8534649ece1bd100e450434)
This should eventually be able to replace ctdb_check_counter_limit()
and ctdb_check_counter_equal(), although it doesn't issue warnings
like the former.
It takes 4 optional arguments:
1. _msg - If "error" then over limit causes an error message and and
exit 1. Anything else fails silently but the function returns 1.
Default is "error".
2. _op - An integer operator supported by test (e.g. -eq, -ge, -gt).
Default is -ge.
3. _limit - Limit for the counter to be used in comparison. Default is
$service_fail_limit.
4. _service_name - Used to identify the counter. Default is
$service_name.
For example:
ctdb_check_counter error -ge 5 foo
will print a message and exit 1 if the counter for foo is >= 5,
whereas
ctdb_check_counter check -ge 5 foo
will just return 1 if the counter for foo is >= 5, and
ctdb_counter_check
with print a message and exit 1 if the counter for $service_name is >=
$service_fail_limit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 5b01b7233515669e995e037205796e265643b176)
When stopping (as opposed to restarting) it is useful to see this
information.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit a9ab1937239761dc32b143c9d225447bc6f090b4)
d362be7d32079ac1390d67056ce107bfbca2c937 wasn't well thought out.
Subsequent commits depend on ctdb_counter_init() taking an argument,
so this makes those cases work.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 05a8fcfbac3da2b5843b31e0fe258255cc761190)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 0f003f05e28037eefdce3a686fcb52cd2289af9d)
The state directory basename becomes "nfs" rather than "statd". One
line of code i moved from the "startup" event to service_start().
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit cc4c5c19af7efe01c48f73bb5ec5e607ed79db4c)
To simplify we also remove the reconfigure from the recovered event
because the monitor event will handle this very quickly anyway.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit da3aedd1a472b430b75989d3c157efedd382e327)
* Add an optional service name argument to existing reconfigure
functions.
* User function service_reconfigure() instead of variable
$service_reconfigure to specify how a service is reconfigured.
* New function ctdb_service_check_reconfigure() reconfigures a service
if it is flagged for reconfigure.
* Remove $service_reconfigure settings from 40.vsftpd and 41.httpd -
they're the defaults.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 15d4111d0761d82f57d5d4f0b1227812d14e4d7c)
Move flagging of managed or unmanaged services into
ctdb_service_start() and ctdb_service_stop(). That way services will
be correctly flagged if they are started from the startup and shutdown
events.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 8675744cbd90b5a5095ed6fff7b36ae82004a457)
service_start is currently a variable. This makes passing arguments
hard. We change it to be a function and put default definitions into
the functions file.
We use a convention that if a service name argument is passed to a
redefined version of service_start() or service_stop() then it will
act unconditionally. If no argument is passed then it can use
internal logic to decide if services should really be started. This
is useful when a single eventscript handles multiple services.
This is a cherry-pick of ae38895 that needed to be reset mid-stream.
There is still some breakage following this commit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 86e4aefed9fd1028660c98e3ea758c2b75ffc1d8)
