IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Removing this (system) database open from the later auth stack results
in a 15-30% improvement in different types of binds and on different
hardware (presumably better with slower disk speeds).
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It seems very likely that our clever attempts to dynamically realloc
the output buffer were never triggered. Two lines of reasoning lead to
this conclusion:
1. We allocate 3 * srclen to start with, but no conversion we use will
more than that. To be precise, from 8-bit charsets we will only deal
with codepoints in the Unicode basic multilingual plane (up to 0xFFFF).
These can all be expressed as 3 or fewer utf-8 bytes. In UTF16 they
are naturally 2 bytes, while in the DOS codes they are 1 byte.
We have checked the code tables, and can not find a plausible
(e.g. not EBCDIC) DOS code page or unix charset that is outside
this range. Clients cannot chose the code page, the only code
pages we will use come from 'unix charset' and 'dos charset'
smb.conf parameters.
Therefore the worst that can possibly happen is we expand 1 byte into 3
(specifically, when converting some e.g. CP850 codepoints to UTF-8).
2. If the reallocation was ever used, the results would have been
catastrophically wrong, as the input pointer was not reset.
Therefore we skip the complication of the goto loop and let E2BIG be
just another impossible error to report.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
iconv() advances the inbuf pointer; if we decide to realloc and re-iconv,
we need to reset inbuf to the source string
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Now, if destlen were SIZE_MAX - 1, destlen * 2 would wrap to SIZE_MAX - 3,
which makes (destlen * 2 + 2) == SIZE_MAX - 1, the same number again.
So we need the <= comparison in this case.
As things stand, it is not actually possible for destlen to be
SIZE_MAX (because it is always an even number after the first round,
and the first round is constrained to be < SIZE_MAX / 2, but *if*
destlen was SIZE_MAX, destlen * 2 + 2 would be 0, so that case is OK.
Similarly the SIZE_MAX - 2 and smaller cases were covered by the
original formula.
We add the comment for people who are wondering WTF is going on with
all this destlen manipulation.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
In failure cases the destination string pointer is set to NULL, but
the size is not changed. Some callers have not been checking the
return value and passing the destination pointer and uninitialised
length onto other functions. We can curse and blame those callers, but
let's also keep them safe.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This fix the following build failure on mips64el:
/usr/lfs/v0/rc-buildroot-test/scripts/instance-2/output/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/stdint.h:122:27: error: conflicting types for 'uintptr_t'
typedef unsigned long int uintptr_t;
^
In file included from ../source3/registry/tests/test_regfio.c:23:0:
../third_party/cmocka/cmocka.h:126:28: note: previous declaration of 'uintptr_t' was here
typedef unsigned int uintptr_t;
Fixes:
- http://autobuild.buildroot.org/results/bae0508e84c905dc23ad7cf1153cd1e9d8e4d734
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
* Rework pack routines to remove unused features:
- ldb_unpack_data_only_attr_list_flags() is removed
- LDB_UNPACK_DATA_FLAG_NO_DATA_ALLOC is now always implied
This improves the unpack performace significantly.
* Improve search performance via new internal flag
LDB_UNPACK_DATA_FLAG_READ_LOCKED which removes a memdup
* Improve search performance during full scan by ignoring
index records early.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Unpack functions currently take an attribute list to restrict the set of
attributes to be returned in the constructed message. This
functionality is never used and complicates implementation of
forthcoming new pack format. This patch removes that functionality.
Using the unpack function then filtering the result turns
out not to be any slower.
NOTE: Configure with --abi-check-disable to build this commit. This
patch is part of a set of LDB ABI changes, and the version update is
done on the last commit.
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This patch moves ldb_kv's filter code into the pack code to replace
'only attr list' functionality which will be removed in forthcoming
commit. Unpacking data then filtering the result is not any slower
than the removed 'only attr list' approach.
'only attr list' test repurposed to test unpack -> filter flow.
NOTE: Configure with --abi-check-disable to build this commit. This
patch is part of a set of LDB ABI changes, and the version update is
done on the last commit.
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Optimising filter_attrs by removing msg and dn allocation/copying. The
caller can construct the msg and possibly steal the dn.
Also giving the function an ldb for future use.
NOTE: Configure with --abi-check-disable to build this commit. This
patch is part of a set of LDB ABI changes, and the version update is
done on the last commit.
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Performance test for pack function and unpack function run with flag
LDB_UNPACK_DATA_FLAG_NO_DATA_ALLOC. Run this test before and after
forthcoming pack format changes to test throughput improvement. On my
machine, the unpack improvement is around 50%.
The test doesn't really belong in LDB torture but it's the only place
where all the required functions are available.
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Making unpack flag LDB_UNPACK_DATA_FLAG_NO_DATA_ALLOC required
behaviour, since allocating data during unpack is slow and unnecessary
in all current usages. In any future unpack usage, if editing of
returned memory is required, some function that duplicates the message
should be used, such as one of the filter_attrs functions, or msg_copy.
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This more modern routine allocates a nice talloc tree.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
The DN is now exploded so as to improve other aspects of the search handling.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Found by covscan (csbuild).
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Noel Power <nopower@suse.com>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed May 15 00:45:58 UTC 2019 on sn-devel-184
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Tue May 14 23:31:27 UTC 2019 on sn-devel-184
vfs_ceph_snapshots is a module for accessing CephFS snapshots as
Previous Versions. The module is separate from vfs_ceph, so that it can
also be used atop a CephFS kernel backed share with vfs_default.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
libcephfs doesn't currently offer an fdopendir equivalent, so the
existing implementation peeks at fsp->fsp_name->base_name, which can
break if vfs_ceph is used under a separate path-munging VFS module.
Return ENOSYS instead and rely on existing OpenDir_fsp() fallback.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13685
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Karolin Seeger <kseeger@samba.org>
Autobuild-Date(master): Tue May 14 11:45:13 UTC 2019 on sn-devel-184
state is always freed before exiting this function, so allocate fde
off it instead of long-lived ctdb context.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13943
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is a chance that restoring IP addresses to the test node will
result in different IP addresses being assigned to that node.
Removing a single IP address may then fail (or be a no-op) if it is
done after the restore.
So, swap the single IP address removal to happen first, then restore,
then remove all IP addresses.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb reloadips will fail if it can't disable takover runs. The most
likely reason for this is that there is already a takeover run in
progress. We can't predict when this will happen, so retry if this
occurs.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Add a --undefined-sanitizer option to configure, this causes the tests
to be run with the undefined behaviout sanitizer enabled.
Errors can be suppressed by adding entries to selftest/ubsan.supp
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue May 14 07:20:28 UTC 2019 on sn-devel-184
Fix use after free detected by AddressSanitizer
AddressSanitizer: heap-use-after-free on address 0x60f0002b2738
at pc 0x7f89b1a213b5 bp 0x7ffce9528810 sp 0x7ffce9528800
READ of size 8 at 0x60f0002b2738 thread T0
#0 0x7f89b1a213b4 in samldb_rename_search_base_callback
../../source4/dsdb/samdb/ldb_modules/samldb.c:4203
#1 0x7f89d3a0db4a in ldb_module_send_entry
../../lib/ldb/common/ldb_modules.c:793
#2 0x7f89b6f27356 in es_callback
../../source4/dsdb/samdb/ldb_modules/encrypted_secrets.c:1418
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13942
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Otherwise, when looping tests for a long time, nodes are unable to
connect to each other.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13924
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon May 13 08:42:44 UTC 2019 on sn-devel-184
ctdb_control_db_attach() and ctdb_control_db_detach() assume that any
control with client ID 0 comes from another daemon and treat it
specially.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13930
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The @list buffer may be uninitialised prior to ceph_flistxattr()
invocation, so only log the address.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13940
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Fri May 10 12:59:05 UTC 2019 on sn-devel-184
Fixes Asan error:
==1924==ERROR: AddressSanitizer: stack-use-after-scope on address
0x7ffe63f873d0 at pc 0x7fb99dae1733 bp 0x7ffe63f86a00 sp 0x7ffe63f861a8
READ of size 24 at 0x7ffe63f873d0 thread T0
#0 0x7fb99dae1732 (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x79732)
#1 0x7fb99cfe5549 in memcpy
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:34
#2 0x7fb99cfe5549 in ndr_push_bytes
../../librpc/ndr/ndr_basic.c:729
#3 0x7fb99cfe5646 in ndr_push_array_uint8
../../librpc/ndr/ndr_basic.c:754
#4 0x7fb99a69dd1b in ndr_push_netr_ChallengeResponse
librpc/gen_ndr/ndr_netlogon.c:462
#5 0x7fb99a6c5fab in ndr_push_netr_NetworkInfo
librpc/gen_ndr/ndr_netlogon.c:556
#6 0x7fb99a6c749d in ndr_push_netr_LogonLevel
librpc/gen_ndr/ndr_netlogon.c:783
#7 0x7fb99a7222de in ndr_push_netr_LogonSamLogonEx
librpc/gen_ndr/ndr_netlogon.c:16547
#8 0x7fb99c982c97 in dcerpc_binding_handle_call_send
../../librpc/rpc/binding_handle.c:416
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13936
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri May 10 10:02:21 UTC 2019 on sn-devel-184
- add new stage "report"
- add pages job in "report" stage to collect .info files, generate html report and publish to gitlab pages.
- only trigger when SAMBA_CI_AUTOBUILD_ENABLE_COVERAGE == '--enable-coverage'
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
keep this var empty by default, since gcov will slow down the build process.
set to `--enable-coverage` to enable coverage on demand.
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
so the rest of the code can use the option values directly.
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We want to enable gcov for all tasks, move it to global wscript.
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Ensure that the tevent_context is deleted after the connection, to
prevent a use after free.
Note: Py_DECREF calls dcerpc_interface_dealloc so the
TALLOC_FREE(ret->mem_ctx) calls in the error paths of
py_dcerpc_interface_init_helper needed removal.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13932
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
