IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This test was failing now that the client had an IPv6 address, however,
the test was marked as flapping so this failure wasn't obvious.
Use iface_list_n_is_v4() to filter out only the IPv4 addresses, as
that's all the test cares about.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The assumption that tests only used the .11 IP was wrong. The
winsreplication test tries to use multiple different IPs - CI doesn't
fail when we remove the additional IPs, but it starts to skip test
cases.
+ Update get_interfaces_config() and get_ipv4_addr() so we can add
multiple different IPs for the same host.
+ Update selftest.pl so the client gets 6 IP addresses.
+ Update comments to better reflect this dependency.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This is a deviation from the Posix readlink function that from my
point of view makes this function easier to use. In Posix, probably
the assumption is that readlink is cheap, so someone under memory
constraints could just start with a small buffer and incrementally
increase the buffer size. For us, it's a network round-trip, and we
have the luxury of [mt]alloc, which the syscall kernel interface does
not have.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Mar 27 12:31:37 UTC 2019 on sn-devel-144
From my point of view the option to change "cli" between
cli_posix_readlink_send and _recv is not necessary.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is more in line with most other users of tevent_req: The state is
called fully after the routines it acts as a state repository for.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Both tevent_req_nterror and tevent_req_is_nterror invalidate
"state". Pull the variables out of "state" before calling those two
functions.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Follow-up to
https://lists.samba.org/archive/samba/2018-September/217992.html
and following. This also fixes a small and very theoretical race: Between the
fstat and the read call the file size might change. This would make us fail on
potentially legitimate files.
This is more complex and probably slower, but looking at the use cases I don't
think the speed matters.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13859
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue Mar 26 04:43:40 UTC 2019 on sn-devel-144
ad2oLschema itself was removed in commit 17aac8cad2 in March 2009. Also
remove the last reference to the program.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The oLschema2ldif program was contained in a single file, making reuse
of its parsing logic elsewhere impossible. With this change the majority
of the code is moved to a new file, "lib.c", while the CLI interface is
now in a "main.c" file.
End-of-line whitespace is also removed.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Mar 22 19:02:32 UTC 2019 on sn-devel-144
Make it clear that we talloc_steal by NULLing out the caller's
session_info
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We default to SMB3 now.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13857
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Mar 22 15:03:43 UTC 2019 on sn-devel-144
If built with system MIT krb5 and dns_lookup_kdc is set to false in
system krb5.conf tests fail because KDC is not found.
Pair-Programmed-With: Andreas Schneider <asn@samba.org>
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Some crypt_r implementations like libxcrypt require a higher value.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
The behavior of these functions upon errors depends on the implementation.
The GNU libc implementation seems to return a null hash, but others like
libxcrypt returns a invalid hash string '*0'.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
The samba3.blackbox.shadow_copy_torture tests call to strptime passing
an uninitalized tm structure as an argument, but the strptime function
does not write the tm.tm_isdst field.
These tm structures are passed later as the mktime argument, which
produces different values depending on whether the arbitrary value
of the tm.tm_isdst field is lower or equal to zero or greather than
zero.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
The logs are spammed with:
nwrap_ed_inventarize_add_new: Hash table is full (Cannot allocate memory)!
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
* Added environment variable to disable deep binding
* Fixed installation of socket_wrapper
* Fixed several small bugs
* Fixed missing NULL check for socket_wrapper_dir()
* Fixes building in Samba source tree
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13853
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Mar 21 21:40:20 UTC 2019 on sn-devel-144
ldb.bytes('') == '' is never True in python3,
we nee ldb.bytes('') == b'' in order to
check that on attribute has an empty value,
that seems to work for python2 and python3.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13843
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Mar 21 18:15:20 UTC 2019 on sn-devel-144
We do the same with the rdn attribute value
and we need the same logic on both in order to
check they are the same.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13816
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
We need to unset BASH_ENV or we get:
Insecure $ENV{BASH_ENV} while running setgid
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Mar 21 16:41:33 UTC 2019 on sn-devel-144
We need to unset BASH_ENV or we get:
Insecure $ENV{BASH_ENV} while running setgid
This probably only happens on recent perl versions.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
This is spamming the console when running 'make test' and we set the log
level to 1 by default in selftest.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
* Remove Python 2.x support except to build just the bare C library
* Remove --extra-python (a build time mode to produce Python2 and Python3
bindings at the same time)
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Mar 21 05:08:49 UTC 2019 on sn-devel-144
* Remove Python 2.x support except to build just the bare C library
* Remove --extra-python (a build time mode to produce Python2 and Python3
bindings at the same time)
* New minor version to allow Samba 4.10 to release a tevent if
required from that branch
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
* Remove Python 2.x support except to build just the bare C library
* Remove --extra-python (a build time mode to produce Python2 and Python3
bindings at the same time)
* New minor version to allow Samba 4.10 to release a tdb if
required from that branch
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
