IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add a test to verify that 'net [rpc] conf showshare' returns the correct
upper/lower case.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Opening a file with a stale (smbd died) LEVEL_II oplock makes
vfs_set_filelen-> ... ->contend_level2_oplocks_begin_default
trigger the immediate leading to do_break_to_none. This goes through
because fsp->oplock_type is not initialized yet, thus 0. Also,
file_has_read_oplocks is still valid, because the smbd that has died
could not clean up the brlock.tdb entry.
Later in the code the exclusive oplock is granted, which is then found
by do_break_to_none, making it panic.
This patch just runs the direct FTRUNCATE instead of vfs_set_filelen.
This means the contend_level2_oplock code is skipped.
The relevant break (LEVEL_II to NONE) is now done in delay_for_oplock()
with the nice effect of removing a comment that was very confusing to
me.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13957
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed May 22 20:09:29 UTC 2019 on sn-devel-184
This allows us to replace the implicit limit via data_blob_append()
removed in the previous commit.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri May 17 20:44:36 UTC 2019 on sn-devel-184
This behaviour is Samba-specific, we have not traditionally cut of responses at 1000
or so as Windows does, and we need to change that behaviour carefully.
This triggers this bug in TDB:
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13952
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13685
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Karolin Seeger <kseeger@samba.org>
Autobuild-Date(master): Tue May 14 11:45:13 UTC 2019 on sn-devel-184
Add a --undefined-sanitizer option to configure, this causes the tests
to be run with the undefined behaviout sanitizer enabled.
Errors can be suppressed by adding entries to selftest/ubsan.supp
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue May 14 07:20:28 UTC 2019 on sn-devel-184
We want to enable gcov for all tasks, move it to global wscript.
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Test for LDAP request with an empty attribute list. LDB responds with
no attributes, but LDAP responds with all attributes. Fix is attached
to the bug below but we can't push it upstream until we've found all
instances of incorrect empty attribute list usage in Samba.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13852
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Windows 10 (1803 and higher) support and use
SMB_FILE_NORMALIZED_NAME_INFORMATION calls over the network. As a
fallback (in case the server don't support it) the client traverses all
path components, which is very expensive.
Implementing SMB_FILE_NORMALIZED_NAME_INFORMATION is very cheap for us
as the open already went through unix_convert() and we have the
information the client is asking for.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13919
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed May 1 18:33:00 UTC 2019 on sn-devel-184
We run the tests again, trying to modify as a normal user rather than
Administrator.
It turns out that we do not always return the same error code as
Windows, but in all these tests both Windows and Samba always return
some kind of error (as you might hope).
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Do we interpret these the same way as Windows? In many cases, no.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The test was presumably commented out because we fail it, and
known-failing it would have hidden the attr-too-short tests that it
was bundled with. If we disentangle them we can knwn-fail it, which
serves as a TODO list.
(passes against WIN2012R2).
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
fl2008r2dc already has a trusted domain. That will be used to use
idmap_ad for querying idmap attributes from the trusted domain.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13903
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We don't want to see this:
python3 -c "import sys
sys.path.insert(0, 'bin/python')
import ldb
m = ldb.Message()
e = ldb.MessageElement('q')
try:
m.add(e)
except ldb.LdbError:
pass
print(m)
"
Segmentation fault (core dumped)
instead we want this:
Traceback (most recent call last):
File "<string>", line 7, in <module>
ValueError: The element has no name
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Noel Power <npower@samba.org>
Autobuild-User(master): Noel Power <npower@samba.org>
Autobuild-Date(master): Tue Apr 23 19:03:35 UTC 2019 on sn-devel-144
Also Skip MC tests for s4 ntvfs fileserver, it's not supported at all.
Use knownfail for s3 fileserver for the time being (until socketwrapper
supports fd-passing).
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
When winbindd is asked to map a name like realm.com\name to a SID ,that
is sucessfully resolved through the lsa lookup name call. The same call
also returns the short domain name (netbios name of the domain). Use
that short domain name for the sid_to_name cache entry, so that
subsequent sid_to_name queries return the expected netbiosname\name
result and not realm.com\name.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13831
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
The username should always be returned in the DOMAISHORTNAME/USERNAME
format.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13831
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
This is needed because the name of the autobuild job and
the name of the selftest env end up in the socket path
for ncalrpc sockets.
The challenge is that (for example)
/memdisk/autobuild/fl/b2424063/samba-schemaupgrade/bin/ab/schemaupgrade_pair_dc/ncalrpc/np/protected_storage
does not fit in a struct sockaddr_un.
Signed-off-by: Garming Sam <garming@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Apr 12 05:41:36 UTC 2019 on sn-devel-144
This adds a new 2-DC testenv that:
1. Provisions an AD DC with 2008R2 schema
2. Joins another AD DC with 2008R2 schema
3. Starts Samba
4. Performs a live schema upgrade on the PDC
Testenv targetting in tests.py files for this testenv required that we
extend the environment dependencies system to include optional post-startup
dependencies specified in ENV_DEPS_POST maps.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Currently schema info's revision field isn't incremented if relax
control is present. This is so that no increment is done during
provision, but we need the relax control in other situations where
the increment is desired, so we should use the provision control instead
to disable schema info update.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13799
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Currently schema info's revision field isn't incremented if relax
control is present. This is so that no increment is done during
provision, but we need the relax control in other situations where the
increment is desired. This patch adds a failing test to expose the
problem.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13799
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
mkdir() is the other call that requires a umask of 0 in Samba.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13834
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Umask manipulation was added to pysmbd with e146fe5ef96c1522175a8e81db15d1e8879e5652 in 2012
and init_files_struct was split out in 747c3f1fb379bb68cc7479501b85741493c05812 in 2018 for
Samba 4.9. (It was added to assist the smbd.create_file() routine used in the backup and
restore tools, which needed to write files with full metadata).
This in turn avoids leaving init_files_struct() without resetting the umask to
the original, saved, value.
Per umask(2) this is required before open() and mkdir() system calls (along
side other file-like things such as those for Unix domain socks and FIFOs etc).
Therefore for safety and clarify the additional 'belt and braces' umask
manipuations elsewhere are removed.
mkdir() will be protected by a umask() bracket, for correctness, in the next patch.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13834
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This provisions a new DC and checks there are no world-writable
files in the new DC's private directory.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13834
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The smbd changes the umask - if the code fails to restore the umask to
what it was, then this is very bad. Add an extra check to every
smbd-related test that the umask at the end of the test is the same as
what it was at the beginning (i.e. if the smbd code changed the umask
then it correctly restored the value afterwards).
As the selftest sets the umask for all tests to zero, it makes it hard
to detect this problem, so the test setUp() needs to set it to something
else first.
This extra checking is added to the setUp()/tearDown() so that it
applies to all test-cases. However, any failure that occur with this
approach will not be able to be known-failed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13834
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Apr 8 03:09:42 UTC 2019 on sn-devel-144
The min_pwd_age and max_pwd_age parameters are both optional and default
to None. However, if we just set the max-pwd-age, then the check
'min_pwd_age >= max_pwd_age' will throw a Python exception because it's
trying to compare an int to NoneType (min_pwd_age). This works on Python 2
but is a problem on Python 3.
We could just add a check that min_pwd_age is not None, but that defeats
the point of having the check if you're only setting either the min or
max age indepedently.
This patch gets the current min/max password age from the DB (in ticks).
If either setting is changed, the ticks will be updated. Then at the end
we check the min is still less than the max (to do this, we convert the
ticks back to days in the interests of readability).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13873
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Apr 5 08:03:08 UTC 2019 on sn-devel-144
Currently setting maxPwdAge doesn't work at all.
While we're adding a test, we might as well assert that minPwdAge
can't be greater than maxPwdAge as well.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13873
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We like to use "TESTS=medley" for the old ad_dc_medley.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add samba3.smb2.notify until Metze gets time to follow it up.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The "oLschema2ldif" program contained multiple bugs triggered by
malformed inputs:
* Iteration beyond list of recognized dsdb syntax OIDs when value wasn't
found (bug 9567)
* NULL pointer dereference when input didn't define a name
* Heap buffer overflows for unterminated token values
Tests are added to reproduce all identified bugs.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=9567
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Then adapted to use ARRAY_SIZE() consistently as suggested by
metze.
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Apr 3 02:43:07 UTC 2019 on sn-devel-144
The prefork restart tests use the kdc to test restart back off. These
tests need to use a process that has not been restarted to ensure that
the process restart counters are sitting at 0 when the tests start.
As MIT kerberos is experimental the heimdal builds will still ensure
that this functionality is tested.
At some stage the echo server should be converted to run in pre-fork and
this process can then be used to test the restart backoff.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
The original code never dereferenced attrs and only added "*" if attrs
was NULL (not if attrs[0] was NULL).
This causes significant performance issues with the new paged_results
module introduced for 4.10 as the initial GUID search requests no
attributes. This GUID search turns into a search for "*" and ends up
allocating memory for the entire database.
This never appears to cause changes in the final result set, only
intermediate processing.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13836
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Mar 29 18:37:29 UTC 2019 on sn-devel-144
Cmocka test exposing LDB bug where a request with an empty attributes
list returns a response containing all attributes. The bug is in the
ACL module and will be fixed in the next commit.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13836
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
