IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
All ctdb specific code is isolated in samba-cluster-support.so now.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Mar 24 19:08:44 CET 2014 on sn-devel-104
Only files in 'samba3-ctdb-client' will see HAVE_CTDB* defines.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This is better than a compile time check for
HAVE_CTDB_CONTROL_CHECK_SRVIDS_DECL.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This way 'smbd -b' returns the cluster features of the currently used
libsamba-cluster-support.so.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This allows runtime selection of libsamba-cluster-support.so
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This gets all dummy functions for the build without CLUSTER_SUPPORT.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This collects the ctdb version dependent files,
which allows vendors to provide multiple versions
of libsamba-cluster-support.so each compiled against different
ctdb versions.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
For Python bindings PIDL wants the struct to be defined as public if we
want to use __ndr_print/pack/unpack.
Define the [public] attribute to ForestTrustCollisionInfo/Record to
allow easier debugging when there is collision in establishing a trust.
This change does not affect C code as NDR functions are always
generated, only not exposed in Python bindings.
https://bugzilla.samba.org/show_bug.cgi?id=10504
Signed-off-by: Alexander Bokovoy <ab@samba.org>
Reviewed-by: Jelmer Vernooij <jelmer@samba.org>
Autobuild-User(master): Alexander Bokovoy <ab@samba.org>
Autobuild-Date(master): Mon Mar 24 12:44:50 CET 2014 on sn-devel-104
Previous commits maintained the ordering between
ctdb_remove_orphaned_ifaces() and ctdb_vnn_unassign_iface(). This
meant that ctdb_remove_orphaned_ifaces() needed to steal the orphaned
interfaces and they would be freed later.
Unassign the interface first and things get simpler.
ctdb_remove_orphaned_ifaces() is now self-contained.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sun Mar 23 06:20:43 CET 2014 on sn-devel-104
reloadips really expects deleted IPs to be released before completing.
Otherwise the recovery daemon starts failing the local IP check. The
races that follow can cause a node to be banned.
To make the error handling simple, do the actual deletion in
release_ip_callback().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It is hard to diagnose failures in the NFS tickle test because there's
no way of telling if the test node doesn't have the tickle or if it
didn't get propagated.
Factor out check_tickles() into local.bash and give it some
parameters.
Have the NFS test call it first to ensure the tickle has been
registered. Then use new function check_tickles_all() to ensure the
tickle has been propagated to all nodes. Give this a bit of extra
time (double the timeout) just in case we're racing with the update.
Add a useful comment to the CIFS test so that I stop asking myself how
the test could ever have worked reliably. :-)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Commit 176ae6c704 caused these functions
to exit on failure. This is incorrect and broke NAT gateway.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is racy and cbffbb7c2f makes it
unnecessary.
The eventscript code still knows that monitor events are special
compared to other events. However, the general concept of monitoring
is no longer tangled up with running scripts.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
"statd-callout notify" currently complains until an add-client or
del-client is done.
Given that we might use ctdb.tdb for something else in the future it
makes sense attach to it in the "startup" event. This could be done
in the background but it should be so lightweight that a timeout will
indicate serious problems.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit 0723fedced added a cheap
implemention of ctdb_control_startup() that simply flags the recipient
node as needing to send updates for each IP when the tickle update
loop next fires. Commit 026996550d
ensures that a node only sends tickle updates once being flagged to do
so.
CTDB_CONTROL_STARTUP is broadcast to all nodes, so this is a good
start. However, the tickle updates are only broadcast to connected
nodes. A recently started node may not yet be considered to be
connected because the keepalive monitoring loop may not yet have
marked the node as connected. This means that the tickle update loop
races with the keepalive monitoring loop. If the tickle update loop
wins then updates will not be sent to the recently started node.
The simplest improvement is to stop the tickle update from depending
on whether a node is connected or not. So instead of broadcasting
tickle updates to connected nodes, they are broadcast to all nodes.
Since no reply is expected, this should work just fine.
While looking at this code, ctdb_ctrl_set_tcp_tickles() is named like
a client function. It isn't a client function. Also, 2 of the
arguments are ignored. So rename this function to
ctdb_send_set_tcp_tickles_for_ip() and remove the ignored arguments.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
This way this logic is centralised. It also means that the IP address
comparisons in the NAT gateway code are IPv6 safe.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is a check for empty lines in the loop just below.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Factor it from read_nodes_file(). Use it there and in
read_natgw_nodes_file().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Tests for xpnn need to implement a stub for ctdb_sys_have_ip(). The
cheapest way of doing this is to read a fake nodemap using the
existing code and check if the IP of the "current" node is the one
being asked about. However, the fake state initialisation isn't
currently available to without_daemon commands because it is meant to
represent daemon state. However, it can be made available by moving
the relevant code into a new stub for tevent_context_init(). The stub
still needs to initialise a tevent context - this can be done by
calling a lower level function.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Add another filter function, like the ones for capabilities and flags
to, for filtering by NAT gateway nodes. This makes the main
natgw_list function more readable.
Note that this drops the early filtering of disconnected nodes, so
they will now be listed in a NAT gateway group. This makes sense.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The index of the nodes array in nodemap isn't the PNN.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of just finding the first node that doesn't have any flags in
flag_mask set, change it into a function that filters a nodemap to
exclude nodes with the given flags.
This makes the NATGW code simpler but also provides a function that
can be used in other code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Check capabilities once to build a filtered node list instead of
repeatedly checking capabilities
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This looks to have got left behind a long time ago when things got
moved around...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It looks like the original without_daemon code still tried to
establish a client connection to the daemon. Closing stderr looks to
be a cheap way of hiding the errors when this failed.
However, later cleanups avoid the client connection altogether, so do
not close stderr. Now debug output from without_daemon commands
actually appears.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The commit "pmda: Use upstream assigned PCP domain id" updated the
Performance Metrics Namespace (pmns) file, without changing the
corresponding metric identifiers used by the agent.
This change fixes the agent metric identifier values to match the pmns
definitions.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Mar 22 00:07:31 CET 2014 on sn-devel-104
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Mar 21 21:22:24 CET 2014 on sn-devel-104
This has to be done in every code path that creates
an NT token, as remote users may have been added to
the local /etc/group database. Tokens created merely
from the info3 structs (via the DC or via the krb5 PAC)
won't have these local groups.
https://bugzilla.samba.org/show_bug.cgi?id=10508
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Simo Sorce <idra@samba.org>
Change-Id: Id4ddaabb91363174d2fbef09e823f53b13912a51
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Mar 21 10:06:04 CET 2014 on sn-devel-104
