IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This works as an unprivileged user, so avoids unnecessary errors when
running in test mode (and not as root):
2022-02-18T12:21:12.436491+11:00 node.0 ctdbd[6958]: ctdb_sys_check_iface_exists: Failed to open raw socket
2022-02-18T12:21:12.436534+11:00 node.0 ctdbd[6958]: ctdb_sys_check_iface_exists: Failed to open raw socket
2022-02-18T12:21:12.436557+11:00 node.0 ctdbd[6958]: ctdb_sys_check_iface_exists: Failed to open raw socket
2022-02-18T12:21:12.436577+11:00 node.0 ctdbd[6958]: ctdb_sys_check_iface_exists: Failed to open raw socket
The corresponding porting test would now become pointless because it
would just confirm that "fake" does not exist. Attempt to make it
useful by using a less likely name than "fake" and attempting to
detect the loopback interface.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SC2164 (warning): Use 'cd ... || exit' or 'cd ... || return' in case cd fails.
A problem can only occur if /etc/ctdb/ or an important subdirectory is
removed, which means the script itself would not be found. Use && to
silence ShellCheck.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
When a node is starting, CTDB reports remote nodes as unhealthy by
default. This can be misleading.
To hide this, report an "UNKNOWN" pseudo state when a remote node is
not disconnected and the runstate is less than or equal to
"FIRST_RECOVERY".
Signed-off-by: Vinit Agnihotri <vagnihotri@ddn.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These would be unintended errors. The block should be omitted to keep
the default value.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current code requires the use of eval in the NFS callout handling
to facilitate testing. Improve the code to remove this need.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current code works in all current cases but is lazy and wrong.
Fix it to avoid breaking on code changes involving different thread
setups.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Tests can be run by hand using different distro styles, such as:
CTDB_NFS_DISTRO_STYLE=systemd-debian \
./tests/run_tests.sh ./tests/UNIT/eventscripts/{06,60}.nfs.*
This fixes known problems for Debian styles, so the tests now pass for
the following values of CTDB_NFS_DISTRO_STYLE:
systemd-redhat
sysvinit-redhat
systemd-debian
sysvinit-debian
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the cluster filesystem is unavailable then I/O errors may occur.
This is no worse than contention, so don't ban. This avoids having
services unavailable for longer than necessary.
Update the associated test to simply confirm that this results in a
leaderless cluster, and leadership is restored when the lock can once
again be taken.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These are easier to debug with a backtrace.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue May 3 10:13:23 UTC 2022 on sn-devel-184
Some tests make generous use of assert() and it can be difficult to
guess the cause of failures without resorting to GDB. This provides
some help.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This aims to test ctdb_tunable_load_file() but also exercises
ctdb_tunable_names() and ctdb_tunable_get_value().
ctdb_tunable_set_value() is indirectly exercised via
ctdb_tunable_load_file().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of documenting test cases with a comment, this allows them to
be documented via an argument to a function that is printed when the
test case is run. This makes it easier locate test case failures when
commands used by test cases look similar,
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This allows the provided output to be specified a little more
carelessly. As per the comment, trailing newlines can't be matched
anyway, so this is notionally a bug fix.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Samba is reformatting shell scripts using
shfmt -w -p -i 0 -fn
so update this one before editing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Debugging a test failure here without GDB is not possible. Dumping a
stack trace gives a good hint.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of repeatedly running a test binary.
Run time for these tests reduces from ~90s to ~75s.
When run under valgrind, the run time for protocol_test_001.sh reduces
from ~390s to <1s.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Feb 14 04:32:29 UTC 2022 on sn-devel-184
The current method of repeatedly running a binary has huge overhead,
especially with valgrind.
protocol_test_iterate_tag() allows output that is usually used for
hinting where a test failure occurred to be replaced with a tag
stored in a buffer, which is printed on test failure.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
A stalled node probably continues to hold the cluster lock, so confirm
elections work in this case.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14958
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Feb 14 02:46:01 UTC 2022 on sn-devel-184
Rename test, clean up node selection. Duplicate for for banning and
removing leader capability cases. Repeat all 3 tests without cluster
lock.
All of the standard election triggers are now tested, with and without
cluster lock. Due to test cluster configuration limitations, the
tests without cluster lock are skipped on a real cluster.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Can be used to disable default options, such as cluster lock.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Rename this configuration item and move it into the [cluster]
configuration section.
Update documentation to match.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Retain "recovery lock" and mark as deprecated for backward
compatibility.
Some documentation is still inconsistent.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the cluster is partitioned then nodes in one partition can not take
the lock anyway, so election is pointless. It just introduces
unnecessary corner cases.
Instead just race for the lock.
When a node notices a lack of leader and notifies other nodes of an
election via an unknown leader broadcast, the cluster lock election is
hooked into this broadcast.
The test needs to be updated because losing the cluster lock can now
result in a leadership change.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The following command names are changed:
recmaster -> leader
setrecmasterrole -> setleaderrole
Command output changed for the following commands:
status
getcapabilities
Documentation and tests are updated to reflect these changes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb_test_init() doesn't actually pass arguments to local_daemons.sh.
This needs to be done using ctdb_nodes_start_custom().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB_SRVID_LEADER will be regularly broadcast to all connected nodes
by the leader.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
SIGHUP is for reopening logs, SIGUSR1 is for reconfigure.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This has support for log rotation (or re-opening).
The log format is updated to use an RFC5424 timestamp and to include a
hostname. The addition of the hostname allows trivial merging of log
files from multiple cluster nodes.
The hostname is faked from the CTDB_BASE environment variable during
testing, as per the comment in the code. It is currently faked in a
similar manner in local_daemons.sh when printing logs, so drop this.
Unit tests need updating because stderr logging no longer produces a
"PROGNAME[PID]: " header.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
RFC5952 says the existing style is not recommended and the [] style
should be employed.
There are more optimised ways of adding the square brackets but they
tend to be uglier.
Parsing IPv6 sockets without [] is now tested indirectly by parsing
examples in both styles and comparing the results.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Thu Jan 13 17:02:21 UTC 2022 on sn-devel-184
Add tests to confirm that square brackets are handled and that
IPv4-mapped IPv6 addresses are parsed as expected.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Oct 12 23:24:18 UTC 2021 on sn-devel-184
test stub code has been updated to handle this, so now let's put it
to work.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14826
RN: Correctly ignore comments in CTDB public addresses file
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Fedora 34 now has a shell function for the which command, which causes
these uses of which to return the enclosing function definition rather
than the executable file as expected.
The event script unit tests always expect the stub service command to
be used, so the conditional in these functions is unnecessary.
$CTDB_HELPER_BINDIR already conveniently points to the stub directory,
so use it here.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
The path of the TDB is known, so calculate the file ID (device number
+ inode number) from it and use this to directly filter /proc/locks to
find processes holding locks.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't use the arguments yet. They will be used in a simplified
version of the code.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These were fine (though still lazy) when these tests were the only
user of this stub. However, the ps stub is about to be enhanced, so
fix these uses of it to represent the intended usage.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If a script times out the caller can talloc_free() the script_list
output of run_event_recv, which talloc_free's proc->output from
run_proc.c as well. If the script generates further output after the
timeout and then exits after a while, the SIGCHLD handler in the
eventd tries to read into proc->output, which was already free'ed.
Fix this by not doing just a talloc_steal but a talloc_move. This way
proc_read_handler() called from run_proc_signal_handler() does not try
to realloc the stale reference to proc->output but gets a NULL
reference.
I don't really know how to do a knownfail in ctdb, so this commit
actually activates catching the signal by waiting long enough for
22.bar to exit and generate the SIGCHLD.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=14475
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This will lead to a crash in run_event_test.c soon
Bug: https://bugzilla.samba.org/show_bug.cgi?id=14475
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Triggers a different code path in run_event_* and aligns it more what
the ctdb eventd really does.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=14475
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This test has been failing with:
Wait until record is migrated to lmaster node 0
<30|BAD: node 0 is not dmaster
dmaster: 1
rsn: 8
flags: 0x00010000 MIGRATED_WITH_DATA
data(6) = "value1"
*** TEST COMPLETED (RC=1) AT 2021-02-02 06:18:48, CLEANING UP...
This should never happen. If this really fails then the wait should
time out.
The problem is that wait_until() does:
"$@" || _rc=$?
and vacuum_test_key_dmaster() currently calls ctdb_test_fail() on
failure, which causes the shell to exit. Instead, pass a variant to
wait_until() that simply returns the correct status instead of
exiting.
An alternative would be to change the statement in wait_until() to do:
("$@") || _rc=$?
so it captures the exit. However, this is a global change and
requires more thought.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is helpful if you are in a listening loop with the same receiver
for many sockets doing the same thing.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Check that the desired state is set on all nodes instead of just the
test node. This ensures that node flags have correctly propagated
across the cluster.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14513
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Oct 6 04:32:06 UTC 2020 on sn-devel-184
This isn't used anywhere and can easily be checked via "ctdb pnn" and
"ctdb recmaster" commands.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Swen Schillig <swen@linux.ibm.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Aug 3 22:21:04 UTC 2020 on sn-devel-184
If nfsconf exists then use it as last resort to attempt to extract
[nfsd]:threads from /etc/nfs.conf.
Invocation of nfsconf requires "|| true" because this script uses "set
-e". Add a stub that always fails to at least test this much.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14444
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Jul 27 07:06:58 UTC 2020 on sn-devel-184
Instead of master/slave.
Nearly all of these are simple textual substitutions, which preserve
the case of the original. A couple of minor cleanups were made in the
documentation (such as "LVSMASTER" -> "LVS leader").
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of master/slave.
Nearly all of these are simple textual substitutions, which preserve
the case of the original.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Avoid use of non-portable md5sum by constructing database names using
index. Improve indentation, use more modern commands, code
improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Jul 22 09:14:35 UTC 2020 on sn-devel-184
Simplify code, use more modern commands, code improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
"wc -l" on some platforms (e.g. FreeBSD) contains leading spaces, so
strip them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Select test node with IPs instead of using a fixed node. Remove
unnecessary code, use more modern commands, code
improvements (shellcheck).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
"wc -l" on some platforms (e.g. FreeBSD) contains leading spaces and
stops "$num from being a number. Create a more portable solution and
put it in a function instead of repeating the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It would be nice to get rid of "onnode any". There's no use making
tests nondeterministic. If covering different cases matters then they
should be explicitly handled.
In most places "any" is replaced by "$test_node". In some cases,
where $test_node is not set, a fixed node that is already used
elsewhere can be reused.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Separate cluster startup from test initialisation for tests that start
the cluster with customised configuration. In these cases the result
of the cluster startup is actually the point of the test.
Additionally, pubips.013.failover_noop.sh claims to have completed
test initialisation twice, which just seems wrong.
The result is:
* ctdb_test_init() takes one option (-n) to indicate when it should
not configure/start the cluster
* New function ctdb_nodes_start_custom() accepts options for special
cluster configuration, only operates on local daemons and triggers a
test failure rather than a test error on failure.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The only caller calls ctdb_test_error() on failure and nesting this
calls can be confusing. A future change will make this even more
confusing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Mostly avoidance of quoting warnings.
Silencing warnings about unquoted $CTDB_TEST_CAT_RESULTS_OPTS is
handled by passing '-' to cat when that variable's value is empty.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Apart from the non-constant sourcing of include files.
Mostly avoidance of quoting warnings.
One subtle change is to simply pass "120" to wait_until_ready() to
stop warnings that it expects arguments but none are passed (both
SC2119 and SC2120). There seems no way to indicate to structure
function argument handling so that shellcheck realises arguments are
optional. In later shellcheck versions, disabling SC2120 for a
function also silences complaints about its callers... but not all of
our testing uses "later" shellcheck versions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Use "#!/usr/bin/env bash" for improved portability
* Drop test_info() definition and replace it with a comment
The use of test_info() is pointless.
* Drop call to cluster_is_healthy()
This is a holdover from when the previous test would restart daemons
to get things ready for a test. There was also a bug where going
into recovery during the restart would sometimes cause the cluster
to become unhealthy. If we really need something like this then we
can add it to ctdb_test_init().
* Make order of preamble consistent
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Avoid:
.../UNIT/shellcheck/scripts/local.sh: line 14: type: shellcheck: not found
The "type" command in dash prints the "not found" message to stdout
but the bash version prints to stderr, so redirect stderr too.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The output in a test failure appears to contain no pstree output
because "00\.test\.script,.*" does not match. However, this is just a
guess because the output is not shown.
Showing the output makes it easier to understand test failures.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will allow local daemons to be used in more contexts, especially
in tests run by Jenkins where the directory names for some targets can
be very long.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In certain circumstance, which aren't obvious, cat(1) can fail when
attempting to write a lot of data. This is due to something (probably
write(2)) returning EAGAIN.
Given that the -v option should only really be used for test
debugging, ignore the failure instead of spending time debugging it.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14446
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
