IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Tests now deviate from the compile-time default by setting CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Tests now deviate from the compile-time default by setting CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of using an intermediate environment variable for nodes files,
just create "node" or "nodes.<pnn>" in CTDB_BASE. This makes the
nodes file loading in fake_ctdb slightly repetitive but simplifies the
test scripts a lot. It also remove several instance of the CTDB_NODES
variable from the code base, so it is no longer found by "git grep".
Use an empty nodes file to indicate that fake_ctdbd should fail to
read it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
setup_ctdb_base() makes this a convenient temporary directory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Make use of variables provided by script_install_paths.sh instead of
reinventing the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Create the file and then copy it to CTDB_BASE for each node.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The interface must always be specified in the public addresses file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This option adds a lot of unnecessary complexity to scripts.
Configuration should go in $CTDB_BASE, either directly or via a
symlink, so simplify by using the default location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
On the node where the tests are run, CTDB_BASE is always set. This
applies to local daemons too. However, when tests are being run
against a real cluster, there may be a need to access configuration
files. However, CTDB_BASE will not be set in this case.
So, provide a function to get CTDB_BASE, if set, or a real cluster
node's configuration directory, if CTDB_BASE is not set.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This was added for a vendor who decided not to use it. It is almost
certainly unused by anyone. If anyone really needs it then it is in
the git history.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the specified file or the default does not exist then log a
warning.
This is done in the takeover code to localise the handling of the
public addresses file. Soon the daemon command-line option will go
away and the takeover code will be replaced in the not too distant
future.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The previous test might have made configuration changes, so call
setup_ctdb() to cause the configuration to be rewritten. This is only
really useful in local daemons tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These provide special-purpose setups for particular testcases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
options.socket will go away in future. This moves processing of
CTDB_SOCKET close to where it is used.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options.
The setenv() can be dropped because the socket location is either the
compile-time default or the already set environment variable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These were necessary because CTDB_SOCKET was not already exported via
test setup.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options. Don't put them in
the configuration file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options.
Switch to using a local variable. This simplifies both the logic and
the ability to later drop the command-line option.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Event scripts live in a standard place.
For testing, CTDB_BASE is modified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Event scripts live in a standard place.
For testing, CTDB_BASE is modified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13319
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Mar 17 04:04:32 CET 2018 on sn-devel-144
This makes the tests indepent from fs xattr support.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13319
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
These tests require a fs with xattr support. This allows adding
xattr_tdb to all other shares in the next commit.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13319
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Not yet used, will be used to tidyup existing code.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13319
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Mar 16 19:47:15 CET 2018 on sn-devel-144
This makes the test independent from the developers environment.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Currently it displays if a domain is online or offline which is wrong.
It tells us if we maintain an active connection to the domain or not.
Users are confused if they read offline because the think winbind is not
functional with that domain.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Mar 16 14:46:43 CET 2018 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13337
Signed-off-by: Björn Baumbach <bb@sernet.de>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Mar 16 07:48:37 CET 2018 on sn-devel-144
