IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Avoid the "needs_fsp_unlink" variable, describe the talloc hierarchy a
bit differently in the comments.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The commit 1d5c546 changed the debug message printed when setting
winbind to offline state and offline logons are disabled from
level 10 to level 0. This message isn't really an error and might
scare some users, e.g. https://bugzilla.suse.com/show_bug.cgi?id=1195573
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Feb 9 20:20:36 UTC 2022 on sn-devel-184
is_zero_addr() doesn't work with addresses that have been zero-initialized.
This fixes the logic added in c863cc2ba34025731a18ac735f714b5b888504da.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14674
MR: https://gitlab.com/samba-team/samba/-/merge_requests/2354
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Feb 8 20:24:12 UTC 2022 on sn-devel-184
No need to duplicate the fopen/fclose
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Feb 7 19:58:57 UTC 2022 on sn-devel-184
Opening a stream base file only worked if "dirfsp == conn->cwd_fsp":
We have replaced fsp->fsp_name with the full dirfsp->relative pathname
at the point where open_pathref_base_fsp() is called. In case dirfsp
is already a subdirectory in a share, this breaks because the
open_pathref_base_fsp() uses fsp->fsp_name, not the original
dirfsp-relative one.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Currently the gcov build currently fails with the following error:
samba-libs: [allshared-no-public-nss_winbind] Running nm ./bin/plugins/libnss_winbind.so.2 | egrep -v ' (__bss_start|_edata|_init|_fini|_end)' | egrep -v ' T _nss_winbind_' |egrep ' [BDGTRVWS] ' && exit 1; exit 0; in '/tmp/samba-testbase/samba-libs/.'
0000000000232458 B __gcov_error_file
0000000000226340 D __gcov_master
000000000001c080 T __gcov_sort_n_vals
00000000002324a0 B __gcov_var
samba-libs: [allshared-no-public-nss_winbind] failed 'nm ./bin/plugins/libnss_winbind.so.2 | egrep -v ' (__bss_start|_edata|_init|_fini|_end)' | egrep -v ' T _nss_winbind_' |egrep ' [BDGTRVWS] ' && exit 1; exit 0;' with status 1
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Sun Feb 6 13:39:09 UTC 2022 on sn-devel-184
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Feb 4 21:11:40 UTC 2022 on sn-devel-184
Otherwise you can't rename or delete files using CHANGE permissions using
the sharesec or shareacls utility
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Feb 4 19:36:53 UTC 2022 on sn-devel-184
Strips off any DFS prefix from the target if passed in.
Remove knownfail selftest/knownfail.d/msdfs-rename.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14169
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
Autobuild-User(master): Noel Power <npower@samba.org>
Autobuild-Date(master): Fri Feb 4 12:02:36 UTC 2022 on sn-devel-184
Strips off any DFS prefix from the target if passed in.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14169
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
Strips off any DFS prefix from the target if passed in.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14169
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
Currently we don't pass MSDFS names as targets here, but a caller
may erroneously do this later, and for non-DFS names this is a no-op.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14169
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
Currently we don't pass MSDFS names as targets here, but a caller
may erroneously do this later, and for non-DFS names this is a no-op.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14169
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
Strips any DFS prefix from a target name that will be passed
to an SMB1/2/3 rename or hardlink call. Returns a pointer
into the original target name after the prefix. Not yet used.
If the incoming filename is *NOT* a DFS prefix, the
original filename is returned unchanged.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14169
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
We fail this on SMB2 for a subtle reason.
Our client code called from smbclient only sets the SMB2_HDR_FLAG_DFS flag
in the outgoing packet on the SMB2_CREATE call, and SMB2 rename does the
following operations:
SMB2_CREATE(src_path) // We set SMB2_HDR_FLAG_DFS here for a MSDFS share.
SMB2_SETINFO: SMB2_FILE_RENAME_INFO(dst_path). // We don't set SMB2_HDR_FLAG_DFS
However, from smbclient, dst_path is a MSDFS path but we don't set the flag,
so even though the rename code inside smbd will cope with a MSDFS path
(as used in the SMB1 SMBmv call) it fails as the correct flag isn't set.
Add knownfail selftest/knownfail.d/msdfs-rename.
Note we need to add the new test to "selftest/knownfail.d/smb1-tests"
as test_smbclient_s3.sh is run against the (ad_member|nt4_member)
environments first using NT1 (SMB1) protocol and then using SMB3,
but the (ad_member|nt4_member) environments don't support SMB1.
Seems a bit strange to me, but all the other SMB1 tests inside
test_smbclient_s3.sh have already been added to "selftest/knownfail.d/smb1-tests"
so just go with the test environment.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14169
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
We pass this already as the cmd_hardlink in smbclient doesn't
do the DFS path conversion on the hardlink target. But it's
good to have the test.
Note we need to add the new test to "selftest/knownfail.d/smb1-tests"
as test_smbclient_s3.sh is run against the (ad_member|nt4_member)
environments first using NT1 (SMB1) protocol and then using SMB3,
but the (ad_member|nt4_member) environments don't support SMB1.
Seems a bit strange to me, but all the other SMB1 tests inside
test_smbclient_s3.sh have already been added to "selftest/knownfail.d/smb1-tests"
so just go with the test environment.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14169
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
CentOS8 is EOL since December 31, 2021. The packages move to vault.centos.org.
We should migrate to CentOS8 Stream soon.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Feb 3 14:31:01 UTC 2022 on sn-devel-184
The following functions use `pid_t` in their interface:
* `tevent_req_profile_get_status`
* `tevent_req_profile_set_status`
BUG: https://bugs.gentoo.org/828720
Signed-off-by: David Seifert <soap@gentoo.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Thu Feb 3 13:18:29 UTC 2022 on sn-devel-184
Identical change as used in cli_unlink(), cli_mkdir(), cli_rmdir()
cli_chkpath() to ensure SMB2 calls correctly set raw_status for
libsmbclient uses.
Remove knownfail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14938
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Feb 2 21:50:31 UTC 2022 on sn-devel-184
The initial implementation of gnutls_aead_cipher_decrypt() had a bug and
used:
*ptext_len = ctext_len;
instead of:
*ptext_len = ctext_len - tag_size;
This got fixed with gnutls 3.5.2.
As we only require gnutls 3.4.7 we need to cope with this...
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14968
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Feb 2 18:29:08 UTC 2022 on sn-devel-184
When the ptext_size != m_total check fails, we call this:
status = gnutls_error_to_ntstatus(rc, NT_STATUS_INTERNAL_ERROR);
goto out;
As rc is 0 at that point we'll exit smb2_signing_decrypt_pdu()
with NT_STATUS_OK, but without copying the decrypted data
back into the callers buffer. Which leads to strange errors
in the caller.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14968
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
We run the quicktest on each linux distro as part of samba-o3 builds.
We should make sure smb2 signing/enctyption works on all of them
and all different system libraries.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14968
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Found by covscan. Coding style kept as in the rest of the file.
Signed-off-by: Pavel Filipenský <pfilipen@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Feb 1 21:09:21 UTC 2022 on sn-devel-184
Review with "git di -b"
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Feb 1 20:04:44 UTC 2022 on sn-devel-184
conn is not referenced anymore, and we only need the files_struct
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Not yet used.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Tue Feb 1 17:25:45 UTC 2022 on sn-devel-184
As lp_smb2_unix_extensions() currently always returns false,
this code path cannot be executed. This will change once the
whole client and server fixes are in place and tests are passing.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Note there is currently no way to create a POSIX file
handle in SMB2 so this code can't be accessed.
This will remain so until client and server code are ready to
turn on SMB2 POSIX extensions and the tests are in place.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
