IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This allows both errors (i.e. unhealthy) and warnings for different
thresholds. It replaces CTDB_CHECK_FS_USE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Drop obvious comments. Use die() for less lines of code. Use a case
statement to avoid forking unnecessary processes for each filesystem
being checked. Drop parentheses around percentages in messages.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Will put all the system monitoring in here, simplifying 00.ctdb.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To support this, extend the "ip route add" stub to detect duplicate
routes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Aug 7 08:37:38 CEST 2015 on sn-devel-104
When the ctdb statistics is reset, reset per database statistics to keep
it consistent with ctdb statistics.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Some code involved in releasing IPs is not re-entrant. Memory
corruption can occur if, for example, overlapping attempts are made to
ban a node. We haven't been able to recreate the corruption but this
should protect against it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This calls release_all_ips() only once on the first ban. If the node gets
banned again due to event script timeout while running release_all_ips(),
then avoid calling release_all_ips() in re-entrant fashion.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
If a control fails and error message is set, the returned status of the
control is always set to -1 ignoring the status passed by the daemon.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The timed out error is ignored for certain events (start_recovery,
recoverd, takeip, releaseip). If these events time out, then the debug
hung script outputs the following:
3 scripts were executed last releaseip cycle
00.ctdb Status:OK Duration:4.381 Thu Jul 16 23:45:24 2015
01.reclock Status:OK Duration:13.422 Thu Jul 16 23:45:28 2015
10.external Status:DISABLED
10.interface Status:OK Duration:-1437083142.208 Thu Jul 16 23:45:42 2015
The endtime for timed out scripts is not set. Since the status is not
returned as -ETIME for some events, ctdb scriptstatus prints -ve duration.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
No use dying or failing eventscripts if someone sends a random
SIGUSR1.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Jul 21 11:00:17 CEST 2015 on sn-devel-104
We don't expect to maintain an up-to-date copy. NFS Ganesha team
might provide patches.
Also move the Ganesha .check file
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This adds new configuration variable CTDB_RPCINFO_LOCALHOST6.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Due to the missing cast of uint64_t, CONTROL_GET_DB_SEQNUM always returned
seqnum <= 256.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11398
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Jul 14 13:03:25 CEST 2015 on sn-devel-104
This is an optimisation to avoid forking the callout for operations
that are not implemented.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Unhealthy after 1 failed attempt to contact the portmapper.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Now that there is only a single NFS eventscript, other eventscripts no
longer need to load all of this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now handled by passing the desired number of threads to the
command specified in the dump_stuck_threads variable in .check files.
Remove unused function nfs_dump_some_threads().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This isn't a straightforward move of code from 60.ganesha to the
callout. Simplifications have been made to allow better
interoperation with the new NFS checking logic.
The following configuration variables have been removed:
CTDB_GANESHA_REC_SUBDIR
Edit NFS ganesha callout to change this location
CTDB_NFS_SERVER_MODE, NFS_SERVER_MODE
Use CTDB_NFS_CALLOUT instead
CTDB_NFS_SKIP_KNFSD_ALIVE_CHECK, CTDB_SKIP_GANESHA_NFSD_CHECK
Disable the corresponding .check file instead
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
$service_check_cmd specifies a command to run instead of the regular
rpcinfo-based check.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now always enabled. If nfsd thread monitoring is not required
then make CTDB_NFS_CALLOUT point to a wrapper around
nfs-linux-kernel-callout that does not implement "monitor-post".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Note that the 60.ganesha RPC checks need to be identical to those in
the nfs-checks.d/ directory. This is because the NFS unit test
infrastructure checks output against what should be produced by the
checks in nfs-checks.d/. This is a minor issue, since one of the aims
of this work is to remove the need for a separate 60.ganesha.
In most cases configuration variable CTDB_NFS_DUMP_STUCK_THREADS is
now ignored. This is now handled by passing the desired number of
threads to the command specified in the service_debug_cmd variable in
a .check file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Provides a new extensible format for .check files, using simple
variables instead of the unwieldy extended test(1) syntax now used.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Change status, nlockmgr, mountd, rquotad to be unhealthy after 6
rpcinfo check failures and do a verbose restart after every 2
failures. Change 60.ganesha for consistency, since 60.ganesha tests
are broken and depend on the consistency.
Apart from the consistency aspect, the check infrastructure will soon
be simplified so that it only allows the equivalent of "unhealthy" and
"verbose restart:b" actions.
Update tests to have a corresponding numbers of iterations. Run 1
extra iteration in most tests to check there are no unexpected
behaviour changes after the designated number of iterations completes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
They are contrived and hard to read. Better to just enumerate the few
sub-tests in these testcases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
A useful baseline test to ensure that certain things (e.g. rpcinfo)
aren't consistently broken.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This means that required result will not be calculated on each
iteration. This is useful in baseline tests where, say, all
iterations should succeed and produce no output. This is useful for
confirming that the eventscript and test infrastructure is working
correctly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
