IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Calculate each offset from the beginning of the buffer and explicitly
use the sizes of structures.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Ethernet packets must be at least 64 bytes.
For ARP the packet size was limited to 64 bytes. This is probably OK
but the code might as well be a little more general.
For IPv6 NA there was no guarantee that the packet is at least 64
bytes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are numerous places in the code where errno can be lost causing
the wrong error to be printed by a caller. Change ctdb_sys_send_arp()
to always return a useful errno on error instead of returning -1 and
sometimes having errno set correctly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Finding the interface and the MAC address are obvious. Might as well
set up the common parts of the destination address structure.
Continue to open the socket and find the MAC address first. This
might seem odd because marshalling and other subsequent steps may
fail. However, in the future this code might be optimised to open a
single socket to send ARPs for a list of addresses on each interface,
so don't change the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit fa94a49dbb accidentally dropped
some copyright attributions. The original version of system_socket.c
was based on system_linux.c but many parts have been taking from
system_freebsd.c, which had these additional copyright attributions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Confirmation is now received from eventd that it is accepting
connections, so this is no longer needed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current method of retrying the connection to eventd means that
messages get logged for each failure.
Instead, pass a pipe file descriptor to eventd and wait for it to
write 0 to the pipe to indicate that it is ready to accept client
connections.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The pipe will soon be needed earlier, so initialise it earlier.
Ensure the file descriptors are closed on error.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Other errors free argv, so do it here too.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The daemon writes 0 into the specified file descriptor when it is up
and listening. This can be used to avoid loops in clients that
attempt to connect until they succeed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13592
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The code in libndr got rid of the second argument quite some time ago
(2010): f9ca9e46ad
However, pidl tests did include a code that passed two arguments.
Recently GCC started to fail to compile such code.
Signed-off-by: Alexander Bokovoy <ab@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Aug 30 04:48:00 CEST 2018 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Aug 29 21:28:41 CEST 2018 on sn-devel-144
This should mean one less process in the process tree, and less places to hold
FDs open.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13591
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Aug 29 08:20:55 CEST 2018 on sn-devel-144
This closes fds other than 0, 1, 2.
This ensures only the correct *.stderr and *.stdout is attached, via
the stdout/stderr parameter to Popen(), but not every other FD
currently open in python at the time Popen is called.
For the tail invocation and other calls to Popen(), because fds 0, 1,
2 are still attached, these function as before.
Per https://docs.python.org/2.6/library/subprocess.html:
"If close_fds is true, all file descriptors except 0, 1 and
2 will be closed before the child process is executed. (Unix only)."
And regarding the passed in parameters:
"stdin, stdout and stderr specify the executed programs’ standard
input,
standard output and standard error file handles, respectively. "
...
"With None (the default), no redirection will occur;
the child’s file handles will be inherited from the parent. "
(The unwanted inherited files would be on a random high FD, where the
program wouldn't know what to do with them, but counting towards the
process FD limit).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13591
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This tries to to split up the tasks more evenly and may help with the python3
work by isolating them from the long samba job.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This tries to to split up the tasks more evenly and may help with the python3 tests
against this environment if started from a more isolated job.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
The defaulttasks or builddirs are often updated out of sync, which causes confusion until
it is resolved.
We simply choose "." as the builddir for the tasks that
are not in the default set.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
These additional tasks should be less complex than the full build and help get us to
a pure python3 build eventually
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
The default tasks will run the tests without --extra-python specified and
the new -py3 tasks will run the python3 tests only.
This will reduce the complexity of the build combinations
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
winexe from https://sourceforge.net/projects/winexe/ is a project
based on Samba libraries from 2012. According to the winexe git
repository the last Samba commit winexe was updated to is 47bbf9886f
from November 6, 2012. As winexe uses unpublished Samba internal
libraries, it broke over time.
This is a port of the winexe functionality to more modern Samba
versions. It still uses internal APIs, but it being part of the tree
means that it is much easier to keep up to date.
The Windows service files were taken literally from the original
winexe from the sourceforge git. Andrzej Hajda chose GPLv3 only and
not GPLv3+. As GPL evolves very slowly, this should not be a practical
problem for quite some time.
To build it under Linux, you need mingw binaries on your build
system. Under Debian stretch, the package names are gcc-mingw-w64 and
friends.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Aug 28 02:03:07 CEST 2018 on sn-devel-144
So far only cli_pull could be called directly without looking at the
protocol. We did not have a simple read that did the right thing
depending on the protocol
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13565
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Mon Aug 27 20:23:55 CEST 2018 on sn-devel-144
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Aug 27 12:00:11 CEST 2018 on sn-devel-144
This will allow splitting up of the python2 and python3 tests without
duplication of this already complex file.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sat Aug 25 11:53:15 CEST 2018 on sn-devel-144
Before this patch, no python3-compatible tests ran against any of fl2000dc, vampire_2000_dc or chgdcpass
and so an autobuild of the samba-ad-dc-2-py3 environment would fail with no tests to run.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This will help when splitting them into a distinct build.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This might reduce issues with the first winbind-using test failing
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This effectively reverts commit 17eba16b. It looks like these flags have
been introduced as part of the onefs support which has been removed
again. As there is no other use for the flags, remove them.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Sat Aug 25 03:23:05 CEST 2018 on sn-devel-144
Fixes an error detected by buildroot autobuilders:
http://autobuild.buildroot.net/results/573/573e2268e205e10d1352fa81122d8f225fdb4575/build-end.log
/home/rclinux/rc-buildroot-test/scripts/instance-1/output/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/stdint.h:122:27:
error: conflicting types for 'uintptr_t'
typedef unsigned long int uintptr_t;
^
In file included from ../lib/ldb/tests/ldb_msg.c:17:0:
../third_party/cmocka/cmocka.h:126:28: note: previous declaration of 'uintptr_t' was here
typedef unsigned int uintptr_t;
The define __WORDSIZE is missing when cmocka.h decides how to
define uintptr_t, this patch includes stdint.h when needed.
Patch sent upstream:
https://lists.samba.org/archive/samba-technical/2018-January/125306.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Fri Aug 24 17:22:10 CEST 2018 on sn-devel-144
This shows that config file loading continues in spite of unknown keys
if ignore_unknown is true.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use the "failover:disabled" option instead.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
