IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Remote IP validation is only called when a takeover run is about to
happen anyway, so don't bother flagging one. Given that a takeover
run isn't being triggered, also drop the test that checks if takeover
runs are disabled. These are the only uses of the rec argument, so
drop it.
One possible further simplification would be to remove this function
because it doesn't accomplish anything. However, it is worth leaving
it as a reminder that remote IP validation should be done properly at
some time in the future.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It is only used by the caller to print a message that includes the
culprit. However, ctdb_reload_remote_public_ips() already prints
perfectly good messages and they include the culprit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
No need to do it immediately. It will happen in less than a second.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is not a recovery, so do not run "startrecovery and "recovered"
events. There are other IP takeover runs where these are not run.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The recovery start/end times used in the checks at the top of
verify_local_ip_allocation() are set by the START_RECOVERY and
END_RECOVERY controls. A couple of takeover runs escape the checks
because they were added later and are not surrounded by these
controls.
Recovery and IP allocation need to be untangled from each other, so
recovery-related events should not be relied on for IP allocation.
This means the solution is not to add these where they are "missing".
The concern that the checks are addressing is to avoid local IP
verification when IP addresses are in a state of flux. Takeover runs
on non-master nodes are already disabled while a takeover run is in
progress, so local IP verification is already skipped in that case.
The other case is the master node, which will be busy with the
takeover run, rather than running main_loop().
The other issue is races. verify_local_ip_allocation() takes a
non-zero amount of time to fetch IP addresses from the local CTDB
daemon and during this time a recovery or takeover run can start, but
a takeover run can still be triggered. The current tests do not stop
this.
Apart from all of this, with most reasonable public IP address
configurations, an extra takeover run will be a no-op so is not a
cause for concern.
It is safe to drop these checks.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Commit 3ddd35142a tries to
unconditionally install pre-built manpages if xsltproc is unavailable.
However, these only exist in a tarball, not in a git repo. That can
make the installation fail.
If xsltproc does not exist then check for each pre-built manpage at
configure time. This should cover all the possible cases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Nov 11 06:23:48 CET 2015 on sn-devel-104
cunit/comm_test_002.sh requires that the comm_server_test is started
before comm_client_test. Since comm_server_test is started in background,
it's possible for comm_client_test to run before comm_server_test has
bound to the unix domain socket.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The tmpfs is mounted and unmounted by ctdbd_wrapper. Format is
CTDB_DBDIR=tmpfs:<tmpfs-options>. The only default for the tmpfs is
mode=700 - to override, specify a different value in <tmpfs-options>.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Nov 9 10:58:32 CET 2015 on sn-devel-104
This will make it easier to run things after CTDB is stopped.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
1. Waiting for generation to change isn't enough. It now changes
early in recovery and reclock might not have been set on all nodes.
So wait until recovery is complete before checking reclock.
2. Use onnode -p when setting reclock on all nodes. That will cause
it to be set quickly on all nodes, to avoid the situation where the
recovery master is the late in the list and resets the reclock on
earlier nodes back to the old value. This shouldn't matter if (1)
is done but it can't hurt.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Nov 6 13:43:45 CET 2015 on sn-devel-104
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Nov 4 03:52:27 CET 2015 on sn-devel-104
This gets rid of the duplicate definitions from ctdb_protocol.h.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
to avoid clash with definitions from source3/include/g_lock.h.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This is to avoid clash with samba structure server_id.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
When a node gets banned, it should go into recovery and freeze all
databases. We rely on the recovery daemon to detect the banned state
and put the node in recovery and freeze all databases.
Recent change in b4357a79d9 took explicit
freezing out of banning code but left the setting of recovery mode
to ACTIVE. Recovery daemon will freeze databases only if the recovery
mode is NORMAL. Recovery mode set to ACTIVE is an indication that the
freeze has started.
Do not set the recovery mode to ACTIVE in banning. Let recovery daemon
take care of it.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Oct 30 10:32:38 CET 2015 on sn-devel-104
This makes sure that all function prototypes in ctdb_client.h are in
the same order of functions defined in ctdb_client.c.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Oct 30 05:04:49 CET 2015 on sn-devel-104
This groups function prototypes for common client/server functions in
common/common.h and removes them from ctdb_private.h.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
When building standalone ctdb from git repo, samba_version_file correctly
includes git sha in VERSION string. When building standalone ctdb from
tarball, samba_version_file puts UNKNOWN in the VERSION string.
Use the packaged include/ctdb_version.h file to set the correct git sha.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Instead of includes.h, include the required header files explicitly.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This groups function prototypes for system specific functions in
common/system.h and removes them from ctdb_private.h.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Wed Oct 28 15:59:02 CET 2015 on sn-devel-104
This was part of libctdb which has been removed.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Since commit 84f5528d9b, CTDB will not
remove an existing socket if it can connect to the existing one.
Instead it will fail to start.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Oct 28 09:44:37 CET 2015 on sn-devel-104
If 2 attempts are made to start CTDB in quick succession then it is
possible for the 2nd attempt to remove a newly created PID file from
the 1st.
If the PID file existed then the PID/SID from ctdbd_is_running() will
be passed to kill_ctdbd(). If the PID file did not exist then there
is no point removing it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
While 0000 is possible from the UNIX/POSIX point of view,
these permissions create problems in an environment with
selinux enabled, which is more strict.
This aligns the perms of the read only tracking db with other
internal dbs.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11577
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Oct 28 06:13:09 CET 2015 on sn-devel-104
Currently only Samba is built with CTDB and since CTDB headers are not
public any more, no other application can build with CTDB. So define
CTDB_SOCKET only during build.
In future CTDB will have public API and proper way of figuring out
CTDB_SOCKET.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The databases are repacked automatically during vacuuming when the
freelist size grows beyond configured threshold (RepackLimit).
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
ctdb_protocol.h was modified to update default capabilities without
corresponding changes in protocol.h.
(Patch dfc84fdd45)
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This is deprecated. For many commands it doesn't make sense. Instead
of "ctdb ip -n all" use "ctdb ip all".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Add new function delete_ip_from_all_nodes(). Also
ctdb_get_all_pnns().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
None of these uses of -n are particularly useful. "-n all" will be
deprecated.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Centrally define all the default capabilities to make the defaults
crystal clear. Capability-related command-line options now have a
direct correspondence rather than a reverse correspondence.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Once the databases are recovered, all the pending calls are resent.
If the vnnmap is not updated, then the nodes can redirect calls to nodes
that are not part of the new vnnmap.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Oct 16 09:31:34 CEST 2015 on sn-devel-104
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Oct 14 05:22:28 CEST 2015 on sn-devel-104
Recovery daemon checks if it is the recovery master before performing
certain checks. During those checks it's possible that re-election can
change the recmaster. In such a case, the recovery daemon should never
do a database recovery.
This is not complete fix since the recovery master can still change
while the recovery is going on. The correct fix is to abort recovery
if the recovery master changes.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Oct 7 17:55:05 CEST 2015 on sn-devel-104
The reason for favouring more connected node is to create a larger
cluster in case of a split brain. In split brain condition, the nodes
are not communicating across partitions and each partition will run its
own election. Among all the partitions, the node which holds the recovery
lock will eventually "win". All the other nodes which won election but
could not grab recovery lock will end up banning themselves.
This also prevents the recovery master role from bouncing between nodes
during startup when the entire cluster is restarted.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
If election occurs during SMB activity, then trying to freeze all the
databases can cause samba/ctdb deadlock which parallel database recovery
is trying to avoid.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Parallel database recovery fixes the samba/ctdb deadlock during recovery.
Many times samba tries to grab multiple record locks in sequence.
Consider a case when samba is already holding a record lock on a database
and tries to get a record lock on second database. If the second record
is not available on the local node, samba asks ctdb to migrate the record.
If recovery occurs at this time (e.g. node becoming inactive), ctdb
cannot freeze all the databases since samba is already holding a lock
and waiting for the second lock. CTDB can process the second record
request only after the recovery is complete, thus causing a deadlock.
In parallel database recovery, each database is frozen and recovered
independent from each other. So as soon as the second database is
recovered, CTDB will resend all the pending migration requests and Samba
can get the second lock. Once samba releases both the locks, ctdb can
freeze the first database and recover it completing recovery process.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Attempt to make common code independent and free from ctdb_context.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The functions defined in common/system_*.c depend on the functions
defined in common/system_common.c. So keep them together.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
These headers are used by the server code and should not be marked public.
Samba builds against the in-tree version of the headers and should not
be built with externally installed CTDB.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
In the parallel database recovery model, all the database will not remain
frozen at the same time. So relax the condition to check if recovery
is active.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Before setting recovery mode to normal, confirm that all the databases are
recovered by matching the database generation with the global generation.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
CTDB verifies the generation in the packet header matches that of the
current generation. However, that check now needs to be done where
database context is available. So add in the check in handlers for
database requests (CTDB_REQ_CALL, CTDB_REQ_DMASTER, CTDB_REPLY_DMASTER
and CTDB_REPLY_CALL).
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The database generation for each database is updated only during recovery.
After recovery is complete the database generation would be the same as
the global generation.
The database generation is required for parallel database recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
It's possible that the databases can get attached after initial freeze.
This typically happens during startup as CTDB will only attach persistent
databases and go in to startup freeze. During recovery, the recovery
master will attach all the missing databases and then send freeze
controls.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Since the banning code does not call this function anymore, it can be
made static.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Once the node is marked as banned, the recovery daemon on that node will
start freezing the databases anyway. This check happens every second
in recovery daemon, so the delay in freezing the databases on ban would
be a second.
The main reason for freezing databases is to prevent any database access
from samba clients. However, banning code also drops the public IPs
and thus disconnecting the clients. In addition, the generation gets
set to INVALID_GENERATION, thus database record migration requests on
that node will not be processed.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This cascades the global transaction controls to individual database
transaction operations. This ensures that the individual database state
is correctly set when processing global transaction controls.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The same structure is required in new controls for database transactions.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Instead of marking all the databases with priority, mark only the database
which is currently being processed.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This changes the locking behaviour when the databases are frozen.
Instead of a single lock helper locking all databases with a priority,
a lock helper is launched for every database.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
These variables are used for state information related to freezing
databases. Instead use the API functions to check if the databases
are frozen.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Use ctdb->freeze_mode only in ctdb_freeze.c and use the functions to
check if databases are frozen everywhere else.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
The pending calls are migration requests received from clients (over unix
domain socket) which are under processing. After a recovery is finished,
any requests which are under processing will be dropped since they do
not belong to the current generation. All the pending call requests
are resent with new generation to restart record migrations.
This is in preparation for parallel database recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This iterator only iterates through databases of specified priority.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
These changes enable the default installation prefix settings to
take effect in both Waf 1.5 and 1.8 with no additional code changes.
Signed-off-by: Thomas Nagy <tnagy@waf.io>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Should be an IP address not a filename.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sat Sep 19 16:39:23 CEST 2015 on sn-devel-104
At the moment they are not installed at all if xsltproc is not
available.
They can still be filtered to have the paths match what was
configured.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Sep 15 11:57:44 CEST 2015 on sn-devel-104
These still say /tmp/ctdb.socket, which is very out-dated. Update
with build-time location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
In this case: ctdbd_wrapper, onnode, ctdb_diagnostics, ctdb.sudoers.
Set sensible defaults from configure options.
Update documentation to match, trying to fix up anything that has been
missed before.
The onnode unit tests need a symlink to the functions file.
The simple integration tests need to set CTDB_BASE and also
need symlinks to functions/nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
fixup
Signed-off-by: Martin Schwenke <martin@meltin.net>
This hasn't existed for a long time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This variable points to /etc/ by default.
This distinguishes it from the different variable from wscript, which
points to /etc/ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Also fix an unused test to set CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Clearly identifies where all state files from scripts should go and
allows that location to be easily changed. This patch should not
change any behaviour (outside of eventscript unit tests, where a
clearer location is now used).
CTDB_VARDIR should no longer be overridden. Continue to set
CTDB_DBDIR and similar to override database location in unit tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Have wscript do path substitution.
No need to export this and CTDB_ETCDIR here, but test scripts will
still need to do so.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Format instructions for adding/deleting nodes with appropriate XML and
simplify wording.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Using $CTDB_VARDIR at file scope is dangerous because it doesn't
respect the configuration. Uses of these variables are simple so just
drop the variables and use $CTDB_VARDIR inside functions where it is
safe.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This directory has been under $CTDB_VARDIR for a long time, so is
already removed. The command is also potentially dangerous if
$ctdb_managed_dir is not set.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
They're not used outside of ctdb_standard_event_helper().
As a consequence, make ctdb_standard_event_helper() do nothing. It is
harder to remove because it is used in many places, perhaps by
external eventscripts where it has been copied from existing scripts.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
To get a similar effect just do something like this:
mmaddcallback ctdb-disable-on-quorumLoss \
--command /usr/bin/ctdb \
--event quorumLoss --parms "disable"
mmaddcallback ctdb-enable-on-quorumReached \
--command /usr/bin/ctdb \
--event quorumReached --parms "enable"
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
60.nfs sets this to a directory where the NFS callout can store state.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Sep 14 08:36:34 CEST 2015 on sn-devel-104
sockets are created in a loop until an unused address is found.
But the unused socket fds were not closed.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Just use ctdb_tcp_connection. It is the same. There are no external
users.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Sep 3 22:12:02 CEST 2015 on sn-devel-104
Always check filesystem usage for the database directories.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sat Aug 29 20:08:48 CEST 2015 on sn-devel-104
CTDB should warn by default if too much system memory or swap is used.
The tests have also been tweaked. In particular, the filesystem-only
tests need to initialise the memory information to avoid errors where
meminfo isn't set.
Document the defaults, warning against disabling them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
They are only printed when the percentage usage changes. This should
stop the logs from being filled with warnings.
Add a test for the throttling.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Marking the node unhealthy should cause Samba processes to close,
possible freeing a stack of memory. If not, then it is somebody
else's problem.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
New variables CTDB_MONITOR_MEMORY_USAGE and CTDB_MONITOR_SWAP_USAGE.
Both take a pair of <warn_threshold>:<unhealthy_threshold> where each
theshold is specified as a percentage.
This adds a callout to check_thresholds() that is run when the
unhealthy threshold is reached.
Add some combination tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB_MONITOR_FREE_MEMORY and CTDB_MONITOR_FREE_MEMORY_WARN are now
percentages that specify thresholds of acceptable memory usage.
Memory/swap usage in tests also specified as percentages.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
No need to use 2 different sources of information for similar checks.
Also, output of free has been changed, whereas /proc/meminfo is a
kernel API, which will not change.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This allows both errors (i.e. unhealthy) and warnings for different
thresholds. It replaces CTDB_CHECK_FS_USE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Drop obvious comments. Use die() for less lines of code. Use a case
statement to avoid forking unnecessary processes for each filesystem
being checked. Drop parentheses around percentages in messages.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Will put all the system monitoring in here, simplifying 00.ctdb.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To support this, extend the "ip route add" stub to detect duplicate
routes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Aug 7 08:37:38 CEST 2015 on sn-devel-104
