IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Tests to confirm the standard process model honours the smbd.conf
variable "max smbd processes", when forking a new process on accept.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We recommend users disable SMBv1 to avoid potential security holes.
However, none of the AD DC testenvs have SMBv1 disabled.
This patch disables SMBv1 on an arbitrarily-chosen testenv (restoredc).
I chose restoredc as we'll want to run the backup tool tests against
this target, and it might be useful to check we can backup a DC if it's
already been restored once.
Note that SMBv2 doesn't support POSIX extensions (only SMBv1 does),
which is why we haven't just disabled SMBv1 on *all* testenvs.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Regardless of whether the testenv uses --use-ntvfs as part of its
provision options, the s4 testenvs all default to using the NTVFS file
server.
It's not particularly obvious that this is happening. The new restore
DCS (restoredc, renamedc, labdc) were all using NTVFS unintentionally.
The problem is the s4 testenvs default to using services '-s3fs +smb".
provision_ad_dc() explicitly overrides this to use s3fs again
(technically it ends up with both in its smb.conf and just uses whatever
comes last).
This patch changes the testenv setup to check for the presence of the
'--use-ntvfs' option and to set the 'server services' config option
appropriately. This way, the provision command and the smb.conf options
should always line up, with respect to NTVFS.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The chgdcpass testenv was not passing --use-ntvfs to the provision
command, but it was still actually using NTVFS.
The reason is the smb.conf generated by provision_raw_step1() would
always try to use the s4/NTVFS file server. Because the smb.conf already
existed, this trumped what was passed to the provision command.
This patch doesn't change the chgdcpass file server. It just makes it
more obvious that chgdcpass is using NTVFS.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
If a testenv didn't specify any other provision arguments, then it
defaulted to using the NTVFS file server.
This patch makes it explicit, so we just pass through "--use-ntvfs" as
extra provision args in the cases we want.
(Whether all these testenvs really need to use NTVFS or not is another
question, but at least now it's easy to see which testenvs use it).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add tests for the restarting of failed/terminated process, by the
pre-fork process model.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
When we created the backup-file for the restoredc/renamedc/labdc
testenvs we weren't explicitly a --configfile on the samba-tool command.
This meant the command tried to use the smb.conf form the default
install location, i.e. /usr/local/samba/etc/smb.conf. On the gitlab CI
runner, there's no samba installed, so it ends up using the default
settings, which is fine. However, if the host machine had an invalid
smb.conf installed there, creating the testenv would fail with an error
like:
ERROR(runtime): uncaught exception - Unable to load default file
File "bin/python/samba/netcmd/__init__.py", line 184, in _run
return self.run(*args, **kwargs)
File "bin/python/samba/netcmd/domain_backup.py", line 222, in run
lp = sambaopts.get_loadparm()
File "bin/python/samba/getopt.py", line 94, in get_loadparm
self._lp.load_default()
We can avoid this by always explictly specifying the backupfromdc's
smb.conf when creating the backup file.
Likewise, labdc/customdc also need the config specified when the admin
password is reset.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
We always need to specify "env->{CONFIGURATION}" when running a samba-tool
command to setup a testenv. Add a note to the README as this wasn't at
all clear.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Nov 9 03:49:55 CET 2018 on sn-devel-144
Convert the ad_dc environment from single process model to the prefork
process model.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This still doesn't cover all the testenvs comprehensively, but it
pretty much exhausts my knowledge of what the various testenvs do.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Douglas Bagnall <dbagnall@samba.org>
Autobuild-Date(master): Wed Nov 7 04:39:05 CET 2018 on sn-devel-144
Also documented the other backup/restore testenvs as well.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
setup_namespaces() already gets done for the backupfromdc's domain, so
this step is unnecessary for the restoredc and offlinebackupdc testenvs
(which are based off the backupfromdc's database).
The setup_namespaces() step is still necessary for the renamedc/labdc,
as these don't have the UPN/SPN suffixes for the new realm yet.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Nov 1 13:06:01 CET 2018 on sn-devel-144
This adds a new testenv that can be used for sandpit/manual testing.
This testenv can be based off any backup-file that you like.
The main use case is large databases. Populating 1000s of users is
time-consuming (it can take hours to create a really large DB). Instead
of having to manually add users to the testenv every time you want to
try something, this allows you to populate the users just once, take a
backup/snapshot of the DB, and then spin up the backup multiple times.
In theory this testenv could be useful for other situations too, e.g.
dealing with a corrupted database, testing DB migration (e.g. 4.7 -->
4.8), or if (for some reason) you wanted to create a realistic
lab-domain within a testenv.
To run-up the testenv you need to specify a BACKUP_FILE environment
variable (the same way we specify the SELFTEST_TESTENV), e.g.
BACKUP_FILE=/files/backup-10k-ad_dc.tar.bz2 \
SELFTEST_TESTENV=customdc make testenv
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Vary the DB backend that we use for the renamed DCs. The labdc and
renamedc are fairly similar, so let's have each of them use a different
backend.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Ensure python scripts are called with the python version that
is defined by $PYTHON
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The samdb object isn't initialized here anymore,
but in the gp_sec_ext, so this parameter to
gpupdate does nothing.
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Previously (i.e. up until the last patch) the backup/restore commands
only worked if the Default-First-Site-Name site was present. If this
site didn't exist, then the various restore testenvs would fail to
start. This is now fixed, but this patch changes the backupfrom testenv
so that it uses a non-default site. This will detect the problem if it
is ever re-introduced.
To do this we need to change provision_ad_dc() so the
extra_provision_options can be specified as an argument. (Note that Perl
treats undef the same as an empty array).
By default, the restore will add the new DC into the
Default-First-Site-Name site. This means the backupfromdc and restored
testenvs will now have different sites, so we need to update the ldapcmp
filters to exclude site-specific attributes.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13621
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The failures in this test compared with Windows Server 1709 are added to
knownfail.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Otherwise this relies on the order that tests run to cause the environment variable
to be left behind.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Otherwise this relies on the order that tests run to cause the environment variable
to be left behind.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This might reduce issues with the first winbind-using test failing
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Previously the only test was to load these modules to trigger the
smb_vfs_assert_all_fns check. As these modules just pass through the
calls, they can be loaded for all tests to ensure that the codepaths are
exercised. This would have found the problem in
smb_time_audit_offload_read_recv.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13568
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Aug 13 22:35:20 CEST 2018 on sn-devel-144
This is a selftest target built from a restored offline backup.
Other backup routines are modified to remove the assumption that every backup
requires server and credentials arguments, since offline backup doesn't
want them. Also, prepare_dc_testenv now returns the generated ctx so we can
run or re-run routines that require it later.
Signed-off-by: Aaron Haslett <aaron.haslett@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Gary Lockyer <gary@samba.org>
Autobuild-Date(master): Mon Aug 6 08:45:19 CEST 2018 on sn-devel-144
This runs the smbtorture3 SMB2-BASIC and smb2.compound_find tests against shares
with "smbd:async dosmode" enabled.
On the vfs_aio_pthread_async_dosmode_force_sync* shares we
force a sync threadpool which ensures we test behaviour on systems that
don't support unshare(CLONE_FS) and also don't support
per-thread-credentials. This simulates the code path of non linux
systems. And makes sure that we don't regress there.
We also test with xattr_tdb and without.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Jul 27 16:04:02 CEST 2018 on sn-devel-144
This just explicitly sets the current default, to ensure the tests that
use this share always use the same "smbd:async dosmode" setting even if
the default changes in the future.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
One of the use-cases for the domain rename tool is to produce a lab
domain that can be used for pre-production testing of Samba.
Basically this involves taking a backup rename with --no-secrets (which
scrubs any sensitive info), and then restoring it.
This patch adds a testenv that mimics how a user would go about creating
a lab-domain. We run the same tests that we run against the restore and
rename testenvs.
Note that the rpc.echo tests for the testallowed and testdenied users
fail, because we don't backup the secrets for these users. So these
tests failing proves that the lab-DC testenv is correct.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add a new testenv that's similar to the existing restoredc, except we
use 'backup rename' to rename the domain as we back it up.
Restoring this backup then proves that a valid DC can be started from a
renamed backup.
Run the same sub-set of RESTOREDC tests to prove that the new testenv is
sound.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
On a Windows client, you designate machine/user
apply with a 'target' parameter. This change
makes gpupdate work more like that command.
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jul 4 13:23:09 CEST 2018 on sn-devel-144
On a Windows client, this command is called 'gpupdate'
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This adds a new testenv for testing that a DC created using the
samba-tool backup/restore can actually be started up. This actually
requires 2 new testenvs:
1. A 'backupfromdc' that solely exists to make a online backup of.
2. A 'restoredc' which takes the backup, and then uses the backup file
to do a restore, which we then start the DC based on.
The backupfromdc is just a plain vanilla AD DC. We use a separate test
env purely for this purpose, because the restoredc will use the same
domain (and so using an existing testenv would potentially interfere
with existing test cases).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Commit 19606e4dc6 updated the MAX_WRAPPED_INTERFACES define
in the C code from 40 to 64.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Log details of Group membership changes and User Primary Group changes.
Changes are logged in human readable and if samba has been built with
JANSSON support in JSON format.
Replicated updates are not logged.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Add audit logging of DSDB operations and password changes, log messages
are logged in human readable format and if samba is commpile with
JANSSON support in JSON format.
Log:
* Details all DSDB add, modify and delete operations. Logs
attributes, values, session details, transaction id.
* Transaction roll backs.
* Prepare commit and commit failures.
* Summary details of replicated updates.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It can't really matter in this case, but it removes confusion
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed May 30 21:46:53 CEST 2018 on sn-devel-144
This ensures the LMDB backend is tested in make test
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Tests streams_xattr and also streams_depot.
Inspired from a real-world test case by Andrew Walker <awalker@ixsystems.com>.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13380
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Apr 12 02:04:28 CEST 2018 on sn-devel-144
These variables were previously set directly on the selftest process
for the purpose of making this ldbsearch call, allowing them to leak
into other environments.
Signed-off-by: Jamie McClymont <jamiemcclymont@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This will allow testing expanding groups on the trust boundary.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13300
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This makes the tests indepent from fs xattr support.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13319
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
These tests require a fs with xattr support. This allows adding
xattr_tdb to all other shares in the next commit.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13319
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This removes the tangle of code for starting up dependencies, and allows
selftest.pl to query dependencies (hence it can know when things can be shut
down early and how to order environments for optimal memory usage - that patch
not yet submitted).
It also removes the slightly hacky special-casing of the ad_members, and sets
$target->{vars} centrally (so each setup_ function does not need to).
Signed-off-by: Jamie McClymont <jamiemcclymont@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Rationale, as sent to samba-technical:
> Why do you remove the explicit argument declarations for so many functions?
> These declarations help catch usage errors, i.e. wrong number of calling
> arguments, especially when you add arguments to functions.
My understanding is that because these are object methods, the prototypes
actually were not providing the checking benefits [see PERLSUB(1) (section
"Prototypes")] -- this is evidenced by the fact that some of the prototypes I
removed actually had the wrong number of arguments!
Now that the subroutines are being dynamically called by function references,
the checking also appears not to apply [see the same source].
There was also a more concrete reason: the setup code will automatically set
up multiple environment dependencies and pass each of their vars as an
individual parameter. Accomplishing this was [seemingly] impossible with the
prototypes in place.
Additionally, there seems to be a consensus among perl devs that prototypes
are generally harmful: see this post (by my colleague) for example:
http://www.perlmonks.org/?node_id=406231
Signed-off-by: Jamie McClymont <jamiemcclymont@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This implements a check to test the delete-on-close flag of a directory
for requests to create files in this directory.
Windows server implement this check, Samba doesn't as it has performance
implications.
This commit implements the check and a new option to control it. By
default the check is skipped, setting "check parent directory delete on
close = yes" enables it.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sat Feb 3 23:42:16 CET 2018 on sn-devel-144
Resolves failure of ad_member to start up under ad_dc (if
the user is determined to be needed).
Signed-off-by: Jamie McClymont <jamiemcclymont@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13225
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Tue Jan 16 07:12:01 CET 2018 on sn-devel-144
Small cleanup for better code readability, no change in behaviour.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed Jan 10 05:19:26 CET 2018 on sn-devel-144
Small cleanup for better code readability, no change in behaviour.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Small cleanup for better code readability, no change in behaviour.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
A few lines above we already checked that winbindd is running.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
If "BUILTIN\Users" already exists, attempting to create it would fail,
so we should check for the existence prior to the creation.
It is unclear *why* the mapping sometimes already exist and sometime
not. There are two places where they would have been created:
1. libnet_join_add_dom_rids_to_builtins tries to add the mapping when
joining a domain, but at that point winbindd isn't running
2. when a user is authenticated in smbd, which clearly can't have
happended when in the function wait_for_start
Go figure...
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
I guess that's what we try to test here, as 'use spnego' was only evaluated
on in the smb server part.
The basically tests the 'raw NTLMv2 auth' option, we set it to yes on
some environments, but keep a knownfail for the ad_member.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Otherwise net join when failing at the CLDAP ping stage will put a
negative entry for the DC in the conncache which can trigger *hard* to
debug problems later in winbindd.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Jan 8 15:22:10 CET 2018 on sn-devel-144
This patch removes setting of NSS_WRAPPER and RESOLV_WRAPPER variables globally
in Samba3.pm (because setting them persistently/globally can create hidden
ordering dependencies). Instead, they are set on subprocesses as required, which
appears to be the following two places (aside from those places where they are
already set explicitly):
* calls to createuser in provision
* calls to wbinfo --ping-dc in wait_for_start
Signed-off-by: Jamie McClymont <jamiemcclymont@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Dec 20 08:50:26 CET 2017 on sn-devel-144
Provision fl2000dc provision with --plaintext-secrets to test that the
--plaintext-secrets option functions correctly.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This is needed for a subsequent commit that modifies an existing test to
write a ._ file over SMB instead of using the ugly local creation hack.
SMB acces of ._ files requires "fruit:veto_appledouble = no", so let's
set it.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13155
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Lays down a sysvol gpttmpl.inf with password policies, then runs the samba_gpoupdate command. Verifies policies are applied to the samdb.
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Only tests with "nfs4:mode = simple" as mode special is supposed to be
broken anyway and simple is recommended.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is the current default, just make it explicit. A subsequent commit
will bump the default to 4.1.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Set the process model for ad_dc to prefork, so that the pre-fork gets
exercised during self test.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
The ad_dc_no_nss was re-using the ad_dc testenv but changing an
environment variable to disable the NSS wrapper module.
Presumably this would setup a second AD DC server with the same
hostname/IP as another DC (but with NSS disabled). This doesn't seem
like a good thing to be doing in the selftests. This patch changes
it so that the no_nss testenv uses a unique IP/hostname.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This is so that we test the source4 case as well. Currently the only
testenv with NTLM disabled is ktest, and that only exercises the source3
code.
I've tried to support the new test environment with minimal changes to the
Samba4.pm setup code.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Add a test where a source object links to multiple different targets.
First we do the replication without GET_TGT and check that the server
can handle sending a chunk containing only links (in the middle of the
replication). Then we repeat the replication forcing GET_TGT to be used.
To avoid having to create 1500 objects/links, I've lowered the 'max
link sync' setting on the vampire_dc testenv to 250.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Set the process group in the samba daemon, the --no-process-group option
allows this to be disabled. The no-process-group option needs to be
disabled in self test.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Mon Sep 18 04:39:50 CEST 2017 on sn-devel-144
Instead of sending all the linked attributes at the end, add a
configurable option to send the links in each replication chunk.
The benefits of this approach are:
- it can reduce memory overhead, as we don't have to keep all the links
in memory over the entire replication cycle.
- the client should never end up knowing about objects but not their
links. (Although we're not sure that this has actually resulted in
replication problems, i.e. missing links).
Note that until we support GET_TGT, this approach can mean we now send
a link where the client doesn't know about the target object, causing
the client to siliently drop that linked attribute. Hence, this option
is switched off by default.
Implementation-wise, this code works fairly the same as before. Instead
of sorting the entire getnc_state->la_sorted array at the end and then
splitting it up over chunks, we now split the links up over chunks and
then sort them when we copy them into the message. This should be OK, as
I believe the MS-DRSR Doc says the links in the message should be sorted
(rather than sorting *all* the links overall). Windows behaviour seems
to chunk the links based on USN and then sort them.
getnc_state->la_idx now tracks which links in getnc_state->la_list[]
have already been sent (instead of tracking getnc_state->la_sorted).
This means the la_sorted array no longer needs to be stored in
getnc_state and we can free the array's memory once we've copied the
links into the message. Unfortunately, the link_given/link_total debug
no longer reports the correct information, so I've moved these into
getncchanges_state struct (and now free the struct a bit later so it's
safe to reference in the debug).
The vampire_dc testenv has been updated to use this new behaviour.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Douglas Bagnall <dbagnall@samba.org>
Autobuild-Date(master): Fri Sep 15 10:07:33 CEST 2017 on sn-devel-144
The code makes sure we are backwards compatible. It will first check if
we still have files in the private directory, if yes it will use those.
If the the file is not in the private directory it will try the binddns
dir.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlet <abartlet@samba.org>
This environment is currently not used for any test in the smb2
testsuite, so this change doesn't affect any existing test.
A subsequent commit will add a test for change notifications with kernel
change notify enabled. It verifies a bug (this one) that only crops up
in such a setup and causes rename events to get lost.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12903
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add a member server that uses idmap_ad. Gets used in the next commit.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This allows us to prove that "ntlm auth = disabled" works
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11923
This will allow the py_credentials test to tell if these are in use
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
The tests make changes to the DC, do not wait for replication, then expect
those to be reflected in the client. If they bind to another server this
will not hold true.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This should help to avoid clashes between periodic and manual runs of
the KCC during autobuild.
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Bob Campbell <bobcampbell@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This removes *IMPORTANT* entries from the gencache winbindd creates on
startup.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12868
Pair-Programmed-With: Ralph Boehme <slow@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Here we check that we get 'REDACTED SECRET VALUES' printed, in order
to avoid regression on the non '-f' behavior.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12782
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This reproduces the problem with trying to implement
FSCTL_VALIDATE_NEGOTIATE_INFO as SMB2_02 server.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12772
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
The test_smbclient_tarmode.pl test operates on $LOCAL_PATH by default
and removes everything. So it deletes all precreated files and
directories which the setup_fileserver() function initially set up.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12867
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This ensures that the posixacl.py test does not race against winbindd starting up and so
give wrong mappings
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12843
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12843
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Not all environments should use the samba workgroup name.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Jun 14 02:53:27 CEST 2017 on sn-devel-144
Attempting to 'ls' the file server against a single process AD will get
stuck. This also appears as the KDC being busy.
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Wed Jun 7 05:14:17 CEST 2017 on sn-devel-144
This ensures that the new "smb2.ioctl.copy-chunk streams" test passes
when run under selftest atop Btrfs.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add a share with "smbd:find async delay usec" set to 10000 and run the
test smb2.compound_find added in the previous commit against this new
share as well.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12699
With this set, the samba3.local.nss test for ad_member will ensure that
we correctly substitute those smb.conf options.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Mar 30 04:26:18 CEST 2017 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12721
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Tue Mar 28 07:00:46 CEST 2017 on sn-devel-144
Because the check was for RID Set, this was never done. However, this caused breakages that we've likely seen before.
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Not used for now, but the next commit will add a test that makes use of
this.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12427
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
This is the equivalent of vampire_dc, but using a domain functional
level of DS_DOMAIN_FUNCTION_2000.
Using this functional level is useful for tests involving replication
and linked attributes, as they behave differently at it.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11139
Pair-programmed-with: Bob Campbell <bobcampbell@catalyst.net.nz>
Encryption is currently not tested in this env so we can safely turn it
off. The next commit will add a blackbox tests that test combinations of
having encryption globally turned off and enabled (desired/required) on
a share.
This also adds a new share "enc_desired" with "smb encrypt = desired"
which will be used by the test in the next commit.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12520
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This verifies that clients can still connect with that setting.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12540
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Jan 27 12:03:39 CET 2017 on sn-devel-144
I can not find anything that uses these in the testsuite
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sun Jan 22 22:15:01 CET 2017 on sn-devel-144
This option is unused and has not been used since before Samba 4.3
when the source4/ winbindd code went away.
The associated dynconfig parameters used for the default are also removed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=10066
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This checks both that illegal NTFS names are still mangled and that long
names have no shortname.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We need this because once we make NETLOGON run in multiple processes,
it will need its own port, and socket_wrapper can not currently allocate
and ephemeral port. It also tests the option, which others have asked be
made available to firewall drsuapi.
Likewise the 'rpc server port' option is used to confirm it
functions for the default port'.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@samba.org>
This proves we can act like Windows and over lsarpc over netlogon if we want
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Dec 15 12:11:09 CET 2016 on sn-devel-144
This test confirms that the challenge set up is available
after the ServerAuthenticate has failed at the NT_STATUS_DOWNGRADE_DETECTED
check.
This is needed for NetApp ONTAP member servers.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11291
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Fix all occurences of bad spelling of "resource" as "res*s*ource" (two
s).
One of the places where this was wrong was when parsing parametric
options in the VFS connect() function in the module. As a result any
setting of
fruit:resource=something
in smb.conf was silently ignored and the default ("file") was active.
In Samba 4.6 we accept both the wrong and the correct spelling, in Samba
4.7 the bad spelling will be removed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12412
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Otherwise we may fail tests because we are still pulling in the full replica
from localdc during the tests. This may block RID allocation in particular.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
We now:
- call gdb_backtrace on the stuck pid to determine why it is stuck
- cleanup faster as we catch the process exit
(by not waiting until 1 second after the exit for waitpid() to return -1)
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Using domain@realm credentials has been problematic when
global conf setting "winbind use default domain" is enabled, this patch
creates a new s4member_dflt_domain environment (where
"winbind use default domain" is enabled) and runs getent & id against the
normal s4member & and new s4member_dflt_domain environments
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12298
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
We should use seperate caches and set the default_ccache_name
accordingly.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It doesn't work, isn't changing, and causes a little bit of extra
confusion.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Sep 1 13:29:46 CEST 2016 on sn-devel-144
Add a test for the "unix only" option of "inherit owner"
smb.conf parameter.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Wed Aug 10 11:25:52 CEST 2016 on sn-devel-144
