IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As side effect this avoids tricks with tevent_se_exists_destructor() to
figure out if the event handler removed itself.
We'll undo the 0.9.36 ABI change on the 0.9.37 release
at the end of this patchset.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This might not be strictly required, but it might
avoid problems in future...
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Calling tevent_signal_destructor() does the same as se->event_ctx is already
NULL.
This also makes sure we correctly cleanup the SA_SIGINFO array.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This will be used to generically support TALLOC_FREE() on
event which are currently running.
It aborts on every explicit talloc_free(), but ignores implicit
cleanup when the talloc parent is about to go.
We'll undo the 0.9.36 ABI change on the 0.9.37 release
at the end of this patchset.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This will be active while the event is part of the ev->scheduled_immediates
list.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
We'll undo the 0.9.36 ABI change on the 0.9.37 release
at the end of this patchset.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
The following patches will rely on having all valid fd events in
ev->fd_events, even if they are temporary disabled with
tevent_set_fd_flags(fde, 0);
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
nss_info does not use libads. Removing this include
fixes a compile error when trying to compile with a
system provided heimdal library:
[2188/3043] Compiling source3/winbindd/nss_info.c
In file included from ../source3/libads/kerberos_proto.h:33:0,
from ../source3/include/ads.h:154,
from ../source3/winbindd/nss_info.c:24:
../lib/replace/system/kerberos.h:33:10: fatal error: krb5.h: No such file or directory
#include <krb5.h>
^~~~~~~~
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Wed Jul 11 22:39:36 CEST 2018 on sn-devel-144
gstack isn't widely available, so provide a simple function that does
the same thing if it gstack can't be found.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Jul 11 14:47:21 CEST 2018 on sn-devel-144
CTDB needs the legacy/00.ctdb event script to be able to function
properly. If this script is not enabled then assume a first-time
install or an upgrade to a version that requires events scripts to be
enabled via symlinks. In these cases enable this script and other
commonly used scripts.
Remove links during uninstall (but not during upgrade).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB needs the legacy/00.ctdb event script to be able to function
properly. If this script is not enabled then assume a first-time
install or an upgrade to a version that requires events scripts to be
enabled via symlinks. In these cases enable this script and other
commonly used scripts.
Only do this for a direct install. If DESTDIR is being used then
assume a package is being built and let the packager handle this case.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Factor out a little bit of common code. More coming.
Most of this is whitespace changes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Only open the client socket when it is needed. Note that this only
works for enabling/disabling event scripts via symlinks.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Supports the case when scripts are installed in the data directory and
are linked to when enabled.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is no longer needed because inactive/disabled nodes no longer
report any available public IP addresses.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This can be done now that NoIPHostOnAllDisabled is gone and will allow
the public IP address failover logic to be simplified.
In the test code, still filter available IP addresses by node state.
This code can't currently read information about available IP
addresses but that will change in future
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Defaulting to host public IP addresses when all nodes are unhealthy
does not obey the principle of least surprise. It has caused much
confusion over the years. It often leads to problems when all nodes
are unhealthy due to something like a cluster filesystem being
unmounted.
Change the default value for this tunable as the first step of
completely removing this behaviour.
Remove tests that set NoIPHostOnAllDisabled=1 and update the expected
result for other tests where no nodes are healthy.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Even the monitor event runs update_tickles(), which needs public IP
addresses and FAKE_CTDB_NUMNODES to be initialised. Currently this
works by default but soon we'll need FAKE_CTDB_NUMNODES in another
context.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jul 11 11:47:09 CEST 2018 on sn-devel-144
Signed-off-by: Timur I. Bakeyev <timur@iXsystems.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Gary Lockyer <gary@samba.org>
Autobuild-Date(master): Wed Jul 11 08:44:10 CEST 2018 on sn-devel-144
Add the configure option --with-system-heimdalkrb5 to build Samba
explicitly with a system Heimdal kerberos library. This does the same as
the more complicated syntax
--bundled-libraries='!heimdal,!asn1,!com_err,!roken,!hx509,!wind,!gssapi,!hcrypto,!krb5,!heimbase,!asn1_compile,!compile_et,!kdc,!hdb,!heimntlm'
and it also enforces the conflicts with MIT Kerbros and the AD DC
build.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jul 11 05:18:59 CEST 2018 on sn-devel-144
Added WHATSNEW blurbs for the following features:
- Password Settings Objects
- Domain backup and restore
- Domain rename tool
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Signed-off-by: Pooja Mahadik <pooja.mahadik@veritas.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed Jul 11 02:22:18 CEST 2018 on sn-devel-144
Fix path escaping in Spotlight so paths with spaces or special
characters can be properly matched to tracker paths.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12688
Based-on-a-patch-from: Mike M Pestorich <mmpestorich@gmail.com>
(similar to github.com/netatalk/netatalk/commit/90aa43d)
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Jul 10 23:17:20 CEST 2018 on sn-devel-144
