IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Move test samba.raw.read which fails in test environments that
don't support SMB1 to nt4_dc_smb1 and remove entry from skip_smb1_fail
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Move samba3.raw.notify & samba3.raw.oplock which fail when used with
test environments that don't support SMB1 to nt4_dc_smb1 and remove
associated entry from skip_smb1_fail
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
This change makes it easier and clearer in following commits
to make specific changes based on test name.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Move samba3.raw.chkpath which fails in environments that don't
support SMB1 to nt4_dc_smb1 and remove entry from skip_smb1_fail
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Tests samba3.raw.acls* don't succeed in environments that don't
support SMB1 so move them to nt4_dc_smb1
Also need to adjust knownfail for samba3.raw.acls nfs4acl_xattr*
Additionally remove the entries for test from skip_smb1_fail
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.smbclient_s3.NT1.sign as the name suggests will fail
in test envs that do not support SMB1 so move it to a _smb1
environment.
Additionally the associated skip_smb1_fails entry is removed as the
test doesn't need to be ported
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.smbclient_ntlm.plain will fail in test environment
that doesn't support SMB1 so move to nt4_dc_smb1
This test only fails with options that require it to communicate over
SMB1, there are sibling tests that test against >= SMB2 so also we
remove the skip_smb1_fail entry as this test doen't need porting
(for this env)
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
This tests fails against nt4_dc because it doesn't support SMB1 so
we move it to nt4_dc_smb1 and remove the corrosponding entry from
skip_smb1_fail
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.blackbox.smbclient_large_file*NT1 will only succeed against
test environments that support SMB1 so we move it to nt4_dc_smb1.
Additionally remove the entry from the skip_smb1_faill file
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.blackbox.smbclient_s3.NT1.plain as its name suggests
requires a test environment that supports SMB1 so we move it to one.
Additionally the entry from the skip_smb1_fail file is removed (for this
env) as not porting is required.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
now that a specific SMB1 enabled env is available lets move this
test to nt4_dc_smb1 env. Additionally the entry is removed from
skip_smb1_fails as no porting is required
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.smbclient_auth.plain will fail in test environment
that doesn't support SMB1 so move to directly to test env
nt4_dc_smb1_done as it doesn't require porting.
This test only fails with options that require it to communicate over
SMB1, there are sibling tests that test against >= SMB2 so also we
remove the skip_smb1_fail entry as this test doen't need porting
(for this env)
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.base.rw1 only works in test environments that support
SMB1 so move test to nt4_dc_smb1 and remove the entry from
skip_smb1_fail
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.raw.lock & samba3.raw.lock currently will only work in
environments that negotiate SMB1 so lets move them to new nt4_dc_smb1
and remove those entries form skip_smb1_fail
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.smbclient_ntlm.plain NT1 fails in environments that
don't support SMB2 so we need to move it to the appropriate _smb1
test env and since this test doesn't need to be ported we can actually
move it directly to the _smb1_done env to indicate that.
Also remove the samba3.blackbox.smbclient_ntlm.plain NT1(ad_dc)
entry from the skip file because we have moved this to the ad_dc_smb1
*and* this test is already ported to >=SMB2
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Move test samba3.rpc.samba3.netlogon which fails in enviroments that
don't support SMB1 to ad_dc_smb1 and remove the test entry from
skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.raw.search fails in envrionments that don't support SMB1
so we move it to ad_dc_smb1 and also remove the entry in skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.raw.read fails in environments that don't support SMB1
so move it to ad_dc_smb1 and also remove the entry in skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.raw.acls fails in environments that don't support SMB1
so move it to ad_dc_smb1 and remove the entry in skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.base.rw1 fails in environments that don't support
SMB1 so we move it to ad_dc_smb1 and also remove the entry in
skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
The following tests which fail when used with environments that don't
support SMB1 fail so we move them to ad_dc_smb1 instead and also remove
th entry in skip_smb1_fails
samba3.raw.session ntlm
samba3.raw.session krb5
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.raw.chkpath fails in environments that don't support SMB1
so we move it to ad_dc_smb1 and also remove the entry from skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
The following tests which fail in environments that dont support
SMB1 have been moved to ad_dc_smb1
samba3.unix.whoami
samba3.unix.whoami kerberos connection
samba3.unix.whoami anonymous connection
samba3.unix.whoami ntlm user@realm
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.rap.sam fails in environments that don't support
SMB1 so we move it to enironment ad_dc_smb1 and remove the entry in
skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test samba3.base.createx_access fails in environments that dont
support SMB1, moving this test to ad_dc_smb1 and removing the entry
in skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
The following tests which fail when used in environment that
SMB1 cannot be negotiated in have been moved to ad_dc_smb1
& nt4_dc_smb1
samba3.raw.close(ad_dc_smb1)
samba3.raw.composite(ad_dc_smb1)
samba3.raw.eas(ad_dc_smb1)
samba3.raw.mkdir(ad_dc_smb1)
samba3.raw.open(ad_dc_smb1)
samba3.raw.rename(ad_dc_smb1)
samba3.raw.samba3badnameblob(ad_dc_smb1)
samba3.raw.samba3badpath(ad_dc_smb1)
samba3.raw.samba3caseinsensitive(ad_dc_smb1)
samba3.raw.samba3oplocklogoff(ad_dc_smb1)
samba3.raw.samba3rootdirfid(ad_dc_smb1)
samba3.raw.sfileinfo.bug(ad_dc_smb1)
samba3.raw.sfileinfo.end-of-file(ad_dc_smb1)
samba3.raw.sfileinfo.rename(ad_dc_smb1)
samba3.raw.streams(ad_dc_smb1)
samba3.raw.unlink(ad_dc_smb1)
samba3.raw.write(ad_dc_smb1)
verified with
python3 source3/selftest/tests.py | grep ad_dc_smb1 | grep "^samba3.raw" | sort -u
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
The following tests which fail in environments that cannot negotiate
SMB1 have been moved to ad_dc_smb1 & nt4_dc_smb1
samba3.rpc.authcontext
samba3.rpc.join
samba3.rpc.samba3.bind
samba3.rpc.samba3.getusername
samba3.rpc.samba3.sharesec
samba3.rpc.samba3.smb1-pipe-name
samba3.rpc.samba3.smb-reauth1
samba3.rpc.samba3.smb-reauth2
samba3.rpc.samba3.spoolss
samba3.rpc.samba3.wkssvc
python3 source3/selftest/tests.py | grep ad_dc_smb1 | grep "^samba3.rpc" | sort -u
test entries have also been removed from skip_smb1_fails
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
verified with
python3 source3/selftest/tests.py | grep _smb1 | grep "^samba3.unix" | sort -u
Additionally the test entries in skip_smb1_fail also removed
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Tests:
samba3.rap.basic
samba3.rap.rpc
have been moved to ad_dc_smb1, nt4_dc_smb1
verified by
python3 source3/selftest/tests.py | grep ad_dc_smb1 | grep "^samba3.rap"
these tests have been removed from skip_smb1_fails
Additionally
samba3.rap.basic.netsessiongetinfo was already marked as knownfail
in ad_dc so in ad_dc_smb1 also true
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
From list of tests identified as failing with environments that
cannot negotiate SMB2 the following tests have been moved to ad_dc_smb1
& nt4_dc_smb1 (and additionally removed from skip_smb1_fails)
samba3.base.attr
samba3.base.chkpath
samba3.base.defer_open
samba3.base.delete
samba3.base.deny3
samba3.base.denydos
samba3.base.dir1
samba3.base.dir2
samba3.base.disconnect
samba3.base.fdpass
samba3.base.mangle
samba3.base.negnowait
samba3.base.ntdeny1
samba3.base.ntdeny2
samba3.base.open
samba3.base.openattr
samba3.base.properties
samba3.base.rename
samba3.base.samba3error
samba3.base.secleak
samba3.base.tcon
samba3.base.tcondev
samba3.base.trans2
samba3.base.unlink
samba3.base.vuid
samba3.base.xcopy
list of tests verified with
python3 source3/selftest/tests.py | egrep 'ad_dc_smb1|nt4_dc_smb1' | grep "^samba3.base" | sort -u
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
the following tests
samba3.base.delaywrite
samba3.base.deny1
samba3.base.deny2
have been moved to fileserver_smb1 env and removed from skip_file
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Additionally remove this test from the skip file as the file doesn't
need to be ported
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
we have an ad_dc_smb1 env and there is not reason why we need
to use nt4_dc for this test. In a later commit we will move the
NT1 test to the ad_dc_smb1 env.
Addionally we change the existing entry in the skip_smb1_fails
skip file.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Additionally since we already have a SMB3 version of the test we
can remove it from the skip file
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Move tests that have SMB1 & >=SMB2 versions to fileserver_smb1_done
Additionally this commit removes the entries for fileserver for the same
tests from skip_smb1.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Introduced in a645160999 but only makes a difference when
environments limit protocols for testing.
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Noel Power <noel.power@suse.com>
This is a relatively new test environment that only uses very few tests
yet. Skip the env name rename dance for this env, but someone has to convert the
tests later on.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
This is a slow test of SMB2 protocol features, it needs not to be repeated. It only
got run against both by accident at the original merge and then extended to
run on the [compount_find] share (with smbd:find async delay usec = 10000)
but really does not need to be run three times.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Building an AD DC while setting --without-ads makes no sense and just wastes compile time on our build hosts.
To allow samba-nt4 to build --without-ad-dc we set rpc.spoolss.notify
(which is built on the NTVFS fileserver for the callbacks) to run in
the ad_member environment rather than nt4_dc and ad_dc.
This is also just more realistic in any case.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Mar 11 09:52:44 UTC 2020 on sn-devel-184
For adapting unix extensions in our client libraries, we need a fresh start
with additional APIs. We can't change existing application behaviour.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Checks server stays up whilst writing to a force closed share.
Uses existing aio_delay_inject share to delay writes while
we force close the share.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14301
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sun Mar 8 19:34:14 UTC 2020 on sn-devel-184
Soon cli_list() will change to SMB_FIND_FILE_UNIX_INFO2 which does not
provide a shortname. For now we lose that as an encrypted test, as for
now it's a SMB1 test which requires unix extensions for
encryption. Hopefully we don't forget to reenable this once the test
is converted to SMB2
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
nonunix
The pattern "//%s/%s %s" already provides the space. Why this patch? It makes
checking the next patch trivial.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We don't need to plan those tests both in source3 and source4's
tests.py. The source4 version seems more "advanced", it uses
smbtorture4_testsuites() to list all tests, making it less
error-prone, and it also does the tests for all SMB1 and SMB3
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Feb 18 21:07:44 UTC 2020 on sn-devel-184
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Feb 14 20:16:04 UTC 2020 on sn-devel-184
TEST FOR: https://bugzilla.samba.org/show_bug.cgi?id=14124
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Jan 24 17:18:38 UTC 2020 on sn-devel-184
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jan 15 22:51:14 UTC 2020 on sn-devel-184
This walks different code paths in the subsequent locker. And the one
that we did not test so far is in fact buggy
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The test suite will bind to the srvsvc interface, let it find the
correct endpoint through the endpoint mapper.
Signed-off-by: Samuel Cabrero <scabrero@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Dec 12 02:00:19 UTC 2019 on sn-devel-184
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Gary Lockyer <gary@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Mon Dec 9 11:57:52 UTC 2019 on sn-devel-184
This blackbox test confirms that Samba returns NTTIME=0 when a filesystem object
has a UNIX timestamp value of 0, ie UNIX epoch start 1.1.1970.
Here's an example output from running smbstatus allinfo on such a file:
$ bin/smbclient -U slow%x //localhost/test -c "allinfo time_0_1970"
altname: T11662~T
create_time: NTTIME(0)
access_time: NTTIME(0)
write_time: NTTIME(0)
change_time: NTTIME(0)
attributes: (80)
stream: [::$DATA], 0 bytes
If you look at it with smbclient ls command, it munges the output to be 1970 so
you don't notice the problem:
$ bin/smbclient -U slow%x //localhost/test -c "ls time_0_1970"
time_0_1970 N 0 Thu Jan 1 01:00:00 1970
The test also test other time_t values -1 and 4294967295 that are used as
sentinel values in Samba code and shows that handling these values is equally
broken.
Same for time_t values < -1.
Note that I'm adding a blackbox test *and* a torture test, as with this blackbox
test I can directly control the server side, but with smbtorture I have to go
through the SMB stack to create the files which doesn't work currently.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=7771
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
samba3.blackbox.smbclient_ntlm.plain used test SMB3 & NT1 protocols
in one test. These changes:
* modify the test driver script test_smbclient_ntlm.sh to take a
protocol as param
* modify the test description generators to pass NT1 & SMB3
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
adjust test generators to run SMB1 & >=SMB2 versions of
samba3.blackbox.preserve_case test.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.net.misc now can run with >=SMB2 or SMB1 protocols,
adjust previous test definition and add new one
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.dfree_quota was almost exclusively a SMB3 test, only
one part was testing legacy SMB1 behaviour, this change splits this
out so the SMB1 part can be run independantly.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.dfree_command was a single test that run both NT1 &
SMB3 tests together. This allow the protocol to be passed into the test
script so the test can be divided into SMB1 & >=SM2 tests.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Nov 23 01:25:12 UTC 2019 on sn-devel-184
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14106
Signed-off-by: Isaac Boukris <iboukris@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
[MS-FSA] 2.1.5.1 Server Requests an Open of a File.
Checks how to behave on both files and directories.
Tested against Windows 10 server - passes. Currently smbd fails this.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This goes directly into the database, for which the format changes
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Note I'm using the share vfs_fruit_xattr because I need a share with both a
streams and a acl_* VFS object.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14121
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This demonstrates that the SMB2 code path doesn't do
any retry for local posix locks.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14113
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
LOCK9A is the original test (with a timeout of -1)
and LOCK9B is the same but with timeout of 10 seconds.
LOCK9B is needed to demonstrate a server bug in the next
commits.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14113
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Ensure that for file access you can mix any of these
three access methods for directory entries and the
returned names/structs stay in sync across telldir/seekdir
changes.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14094
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Sep 3 17:31:29 UTC 2019 on sn-devel-184
Survives against W2k12R2
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Aug 8 01:05:38 UTC 2019 on sn-devel-184
Show that the current smb1 server does not properly retry a nonblocking
open of a kernel-oplocked file
Bug: https://bugzilla.samba.org/show_bug.cgi?id=14060
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Existing smbtorture tests set and query ACLs through SMB, only working
with the DACLs in the Security Descriptors, but never check the NFSv4
ACL representation. This patch introduces a unit test to verify the
mapping between between Security Descriptors and NFSv4 ACLs. As the
mapping code queries id mappings, the id mapping cache is first primed
with the mappings used by the tests and those mappings are removed again
during teardown.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14032
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Ensure that these tests keep working.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Jul 5 05:02:12 UTC 2019 on sn-devel-184
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Jul 1 23:21:07 UTC 2019 on sn-devel-184
Now that File-ID calculation goes through the VFS, we can nicely make a
per-share option out of it.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jun 26 19:31:28 UTC 2019 on sn-devel-184
(Spoiler alert, it breaks the oplock :-).
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Jun 24 20:05:34 UTC 2019 on sn-devel-184
Samba aborts the read&x after a blocked, but eventually successful
locking&x call. Both Windows and source4/ntvfs do the read properly,
source3/smbd does not. With later code, this will become possible much
easier. Lets see if it's worth it given that we've got away with this
forever.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Right now we fail this with smbd, we return LOCK_NOT_GRANTED instead
of FILE_LOCK_CONFLICT. This will change with later commits.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This verifies that smbd always adds BUILTIN\Guests to the guest token which is
required for guest authentication.
Currently the guest token depends on the on-disk configured group mappings. If
there's an existing group mapping for BUILTIN\Guests, but LOCALSAM\Guest is not
a member, the final guest token won't contain BUILTIN\Guests.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13944
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Found by LCOV.
Some of the failures should be fixed by setting "restrict anonymous = 2"
as requested by bug 12775
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
The samba3.wkssvc test is not as comprehensive, but rpc.wkssvc needs to run against the
ad_member environment to get past a builtin administrators check.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
The test already existed but was not run.
Found by LCOV
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This reveals a bug in the AppleDouble conversion code: the conversion code that
unlinks an empty resource fork AppleDouble sidecar file ("._file") gets
triggered as part of open_file_ntcreate(..., "file:AFP_AfpResource", ...):
after SMB_VFS_OPEN() has been called with O_CREAT, what created the file, we
call SMB_VFS_FSTAT() on the just created filehandle. This ends up in
ad_convert(), finds the resource fork empty and thus deletes the file.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13958
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Found by Michael Hanselmann using fuzzing tools
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13842
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed May 15 23:08:58 UTC 2019 on sn-devel-184
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13793
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Mar 27 14:33:35 UTC 2019 on sn-devel-144
The same tests as for the other modes xdr and ndr are marked as
knownfail.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Test does:
mkdir POSIX_foo
mkdir POSIX_Foo
mkdir POSIX_foo/Foo
mkdir POSIX_foo/foo
mkdir POSIX_Foo/Foo
mkdir POSIX_Foo/foo
Which should pass a SMB1 POSIX extensions server
as posix mkdir should always be case sensitive
no matter what the share is set to.
Mark as knownfail for now.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Right now this only looks at the nameserver setting. It is initally made for
asynchronous AD DC lookup routines, where we don't need the "search", "domain"
and other settings. When we convert general "net", "smbclient" and others to
use this, we might either add "domain" handling to this code or look at
something like c-ares which already does it.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Port ntlm_auth_krb5 bash script tests to python
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Noel Power <npower@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
When run with MIT kerberos, the smb2 session expire tests fail when run
against the ad_member test environment. The krb5 library initializes
values from the private krb5.conf profile
st/ad_member/lockdir/smb_krb5/krb5.conf.ADDOMAIN, this file does not
contain a defined clockskew setting. The expire tests require a low
clockskew value that is set in st/ad_member/lib/krb5.conf.
This patch disables the creation of the private krb5.conf for the
ad_member_idmap_rid testenv, and runs the smb2.session tests
against ad_member_idmap_rid instead of ad_member.
Signed-off-by: Justin Stephenson <jstephen@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Dec 12 12:51:24 CET 2018 on sn-devel-144
Tests that you can now use a credentials file with net.
Signed-off-by: Olly Betts <olly@survex.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The next commit adds a subtest to the smb2.session testsuite that
requires Kerberos (ad_dc would work), but where neither SMB2 server or
client must require signing (ad_dc, being an AD DC, requires signing).
The ad_member environment supports Kerberos with the SMB2 server not
mandating signing, that'll do.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13661
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
The next commit is going to add a testsuite to "smb2.session".
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13661
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Nov 9 03:49:55 CET 2018 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13673
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Sat Nov 3 05:55:45 CET 2018 on sn-devel-144
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Nov 1 05:06:23 CET 2018 on sn-devel-144
The env name will be appended. There is no need to have it twice. Can't
we remove the tests againa ad_dc_ntvfs completely?
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Aug 29 21:28:41 CEST 2018 on sn-devel-144
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Right now, this test will succeed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13360
CVE-2018-1139: Weak authentication protocol allowed.
Guenther
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This runs the smbtorture3 SMB2-BASIC and smb2.compound_find tests against shares
with "smbd:async dosmode" enabled.
On the vfs_aio_pthread_async_dosmode_force_sync* shares we
force a sync threadpool which ensures we test behaviour on systems that
don't support unshare(CLONE_FS) and also don't support
per-thread-credentials. This simulates the code path of non linux
systems. And makes sure that we don't regress there.
We also test with xattr_tdb and without.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Jul 27 16:04:02 CEST 2018 on sn-devel-144
The tests are currently only run against streams_depot, where stream IO
is handle based, compared to streams_xattr which is path
based. vfs_streams_xattr is also used much more in real world setups, so
we should run our tests against it.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13451
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Tests against a directory handle on the root of a share,
and a directory handle on a sub-directory in a share.
Check SEC_DIR_ADD_FILE and SEC_DIR_ADD_SUBDIR separately,
either allows flush to succeed.
Passes against Windows.
Regression test for:
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13428
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri May 18 02:38:50 CEST 2018 on sn-devel-144
This avoids one more case where tests can go missing by removing the conditional.
(Yes, this has happend for other tests in the past).
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue May 15 06:31:03 CEST 2018 on sn-devel-144
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat May 5 04:31:18 CEST 2018 on sn-devel-144
This demonstrates that wbinfo -n / --name-to-sid returns information
instead of failing the request. More specifically the query for
INVALIDDOMAIN//user returns the user SID for the joined domain, instead
of failing the request.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13312
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This part of the protocol is not changed by being an AD DC.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
These are slower tests that do not need to be run against the ad_dc configuration
in particular.
This saves time in the ad_dc job which needs to stay under 50mins to
pass on travis-ci (and faster tests are better for everyone anyway).
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This avoids these running in the ad_dc environment which we need to get under 50mins for
travis-ci.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This aims to keep the ad_dc tests well below 50mins for travis CI and
base.delaywrite is very slow.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This is a slow test and we need to keep the time on ad_dc down to below 50mins total
for travis-ci.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
These tests require a fs with xattr support. This allows adding
xattr_tdb to all other shares in the next commit.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13319
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
samba3.rpc.samba3.netlogon is using get_myname to find a username with which to
perform a join. This means that the test tries to join with the existing
localnt4dc2 user, which happens to work if get_myname is working
correctly (which it isn't -- see next commit about NSS_WRAPPER_HOSTNAME!)
This commit fixes a test run with, for example:
TESTS="samba3.blackbox.smbclient_ntlm.plain samba3.rpc.samba3.netlogon"
(given samba3.blackbox.smbclient_ntlm.plain is in the nt4_member env)
...which previously failed due to the combination of this and the
NSS_WRAPPER_HOSTNAME bug.
Signed-off-by: Jamie McClymont <jamiemcclymont@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This is implemented using cmocka and the __wrap override for
pthread_create.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13170
Signed-off-by: Christof Schmitt <cs@samba.org
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Fri Dec 8 13:54:20 CET 2017 on sn-devel-144
A subsequent commits modifies an existing tests that needs $localdir to
also run against "vfs_fruit_metadata_stream" and
"vfs_fruit_stream_depot". This reveals test failures, those will be
fixed in a subsequent commit.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13155
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This just puts the auth option first matching the first test with the
"vfs_fruit" share directly above the modified lines.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13155
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This demonstrates that "net rpc oldjoin" is currently broken.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13149
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Test if the server blocks whilst waiting on a kernel lease held by
a non-smbd process.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13121
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sat Nov 11 20:12:26 CET 2017 on sn-devel-144
Only tests with "nfs4:mode = simple" as mode special is supposed to be
broken anyway and simple is recommended.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is the current default, just make it explicit. A subsequent commit
will bump the default to 4.1.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This was the only user of getaddrinfo_send and not run anyway
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This test verifies that SEC_STD_WRITE_OWNER only effectively grants
take-ownership permissions but NOT give-ownership. The latter requires
SeRestorePrivilege privilege.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=7933
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Grant the test-user SeRestorePrivilege, this is needed for
give-ownership operations. And then granting SeRestorePrivilege requires
`net`, so add that as an additional argument to the script.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=7933
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Looked like a good idea at its time, but its only user did not need
it anyway
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
select() is no longer useful on modern systems.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sat Sep 16 08:35:39 CEST 2017 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12975
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlet <abartlet@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Aug 23 17:05:48 CEST 2017 on sn-devel-144
There's no point in running it twice with the old ccache.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This makes sure only the "creating a bad symlink and deleting it"
is failing with -mSMB3.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This prepared a reproducer for bug #12772
'Clients with SMB3 support can't connect with "server max protocol = SMB2_02"'.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12772
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
The test_smbclient_tarmode.pl test operates on $LOCAL_PATH by default
and removes everything. So it deletes all precreated files and
directories which the setup_fileserver() function initially set up.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12867
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12849
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Tue Jun 20 14:48:33 CEST 2017 on sn-devel-144
Against ad_dc we get NT_STATUS_OK, but against nt_dc we get NT_STATUS_NO_SUCH_PRIVILEGE,
so check for both. We can't use TARGET_IS_SAMBA3() here as this is set for talking to smbd
even when run under the ad_dc.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Add a share with "smbd:find async delay usec" set to 10000 and run the
test smb2.compound_find added in the previous commit against this new
share as well.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Add a test that fetches an ACL whose size is larger than 4K.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12737
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This adds two blackbox tests that run wbinfo --sids-to-unix-ids:
o a non-existing SID from the primary domain should return a mapping
o a SID with a bogus (and therefor unknown) domain must not return a mapping
Bug: https://bugzilla.samba.org/show_bug.cgi?id=11961
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Apr 7 00:05:02 CEST 2017 on sn-devel-144
The test is in its own suite because it validates
our hackish workaround rather than some reference
implementation behavior.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12715
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sun Mar 26 23:31:08 CEST 2017 on sn-devel-144
This test is already slow. We should not run it twice!
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Sat Mar 11 04:25:14 CET 2017 on sn-devel-144
Not used for now, but the next commit will add a test that makes use of
this.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12427
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
The next commits will completely change handle based VFS ops. This
couldn't be done in a piecemeal fashion, I had to wipe the slate clean.
Disabling tests in order to not break git bisects.
Tests will be reenabled after a few commits that apply the larger change
in a somewhat digestible fashion.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12427
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
This is just redundant and didn't add test coverage.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12427
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12572
Pair-programmed-with: Ralph Boehme <slow@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Feb 16 22:06:51 CET 2017 on sn-devel-144
Test various combinations of having encryption globally turned off and
enabled (desired/required) on a share, with SMB1 UNIX Extensions and SMB3.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12520
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This verifies that clients can still connect with that setting.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12540
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Jan 27 12:03:39 CET 2017 on sn-devel-144
Fails currently, will be made to work in the next commit.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12536
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This checks both that illegal NTFS names are still mangled and that long
names have no shortname.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This test passes against Win2K12 but fails against smbd
without the previous commit.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12466
Signed-off-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Dec 10 10:11:10 CET 2016 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12460
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed Dec 7 11:52:03 CET 2016 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Oct 7 15:52:36 CEST 2016 on sn-devel-144
