IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
All the other subtests in samba3.raw.acls.create_file|dir pass with
nfs4acl_xattr, it's just the subtest that tries to set the owner which
fails with everything else then acl_xattr.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Sockets need to be created from sock_daemon_run_send(). This means
that stale socket removal can depend on the PID file context being
initialised.
Also fix associated test.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This is an optimisation that can cause incorrect results. If ctdbd
was killed and there is a stale PID file then this will often cause
"CTDB exited during initialisation". The wrapper reads the old PID
from the PID file, finds the PID gone, complains and exits.
It is better to drop this code and finally get this right. If ctdbd
does exit early then it will take CTDB_STARTUP_TIMEOUT (default 10)
seconds before the wrapper fails. That's not too bad...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Regression tests doing an SMB2_find followed by
a set delete on close and then close on a directory.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13118
Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sun Nov 5 12:31:12 CET 2017 on sn-devel-144
Both dptr_create() and can_delete_directory_fsp() are calling OpenDir_fsp()
to get a directory handle. This causes an issue when delete-on-close is
set after smb2_find because both directory handle instances share the same
underlying file descriptor. In addition the SMB_ASSERT() in destructor
smb_Dir_destructor() gets triggered.
To avoid this use OpenDir() instead of OpenDir_fsp().
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13118
Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Nov 3 19:05:05 CET 2017 on sn-devel-144
The server name in the AS-REQ is unprotected, sadly.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12894
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Nov 2 07:16:50 CET 2017 on sn-devel-144
Bug: https://bugzilla.samba.org/show_bug.cgi?id=6133
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Nov 2 03:16:11 CET 2017 on sn-devel-144
Add .gitlab-ci.yml file, and define build jobs in groups.
Once gitlab-runner set up, builds and tests can be triggered
automatically in parallel when push to gitlab.
Also, with gitlab-runner autoscale mode, build instances
will be created and removed on demand.
Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Tue Oct 31 15:32:16 CET 2017 on sn-devel-144
Since smbc_setX calls now handle string allocation using malloc
themselves (since commit 2d41b1ab78) we
indeed no longer need to provide malloced strings (the extra malloc
already got removed earlier).
Guenther
Signed-off-by: Günther Deschner <gd@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Mon Oct 30 21:09:14 CET 2017 on sn-devel-144
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Mon Oct 30 04:16:42 CET 2017 on sn-devel-144
Now both routines avoid the escape/unescape implicit in ldb_dn_add_child_fmt()
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
This will allow it to be used in common with replmd_conflict_dn()
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
This makes it clearer that we are just replacing the RDN and ensures we do not
somehow create multiple components inside ldb_dn_add_child_fmt().
We also avoid an escape/un-escape round-trip.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
The reality is a bit more complex than this comment indicates. We should never
suggest anywhere that we can connect to domains that we don't have a direct
trust account to. For the member case, it's "our" domain, and for the DC case,
it's the direct trusts. Everything else is pure luck.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Oct 28 00:31:58 CEST 2017 on sn-devel-144
This has been fixed with b81ca4f9dc
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Oct 27 15:22:43 CEST 2017 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13101
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Oct 27 04:54:22 CEST 2017 on sn-devel-144
Otherwise the magic member is not initialized.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13101
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Oct 26 17:31:40 CEST 2017 on sn-devel-144
Otherwise the client registration can race with the check in the test.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13097
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Oct 26 13:32:24 CEST 2017 on sn-devel-144
Found by cppcheck.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13100
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Oct 26 09:34:40 CEST 2017 on sn-devel-144
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Oct 26 05:36:11 CEST 2017 on sn-devel-144
The logic involved in asserting that a function raises an LdbError with
a particular error value has shown itself to be too complicated for me
to repeat too often.
To test this function, you would want a put a test in a bit like this:
def test_assertRaisesLdbError(self):
for i in [1, 2, ldb.ERR_ENTRY_ALREADY_EXISTS, 999]:
def f(*args, **kwargs):
raise ldb.LdbError(i, 'msg %s' % i)
self.assertRaisesLdbError(i, 'a message', f, 'la la', la='la')
def f2(*args, **kwargs):
raise ldb.LdbError(i + 1, 'msg %s' % i)
def f3(*args, **kwargs):
pass
for f in (f2, f3):
try:
self.assertRaisesLdbError(i, 'a message', f, 'la la', la='la')
except AssertionError as e:
print i, e, f
pass
else:
print i, f
self.fail('assertRaisesLdbError() failed to fail!')
..but a self-testing test-tester is getting a too meta to run in every
autobuild.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
replmd_add_fix_la() was already making the same check; here we move it
a bit earlier.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We were ensuring that when we got an LdbError it was the right type,
but we weren't ensuring we got one at all.
The new test doesn't fail.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We can't remove the same thing twice in the same message.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Because we already have a sorted parsed_dn list, this is a simple
linear scan.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13095
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
