IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These tests assumed that 4K chunks remain allocated following write at
a subsequent offset. This is not the case for other filesystems (E.g.
XFS, Btrfs, Etc.), which may deallocate the chunk.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Samba now supports:
- FSCTL_SET_SPARSE
- FSCTL_SET_ZERO_DATA, via FALLOC_FL_PUNCH_HOLE
- FSCTL_QUERY_ALLOCATED_RANGES, via SEEK_DATA/SEEK_HOLE
As such, flag support for sparse files, via the
FILE_SUPPORTS_SPARSE_FILES capability flag if FALLOC_FL_PUNCH_HOLE and
SEEK_DATA/SEEK_HOLE are present at configure time.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This change implements support for FSCTL_QUERY_ALLOCATED_RANGES using
the SEEK_HOLE/SEEK_DATA functionality of lseek().
Files marked non-sparse are always reported by the ioctl as fully
allocated, regardless of any potential "strict allocate = no" savings.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
SEEK_HOLE and SEEK_DATA will be used in the implementation of
FSCTL_QUERY_ALLOCATED_RANGES support.
"SEEK_DATA and SEEK_HOLE are nonstandard extensions also present
in Solaris, FreeBSD, and DragonFly BSD; they are proposed for
inclusion in the next POSIX revision (Issue 8)."
With Linux they are supported on:
- Btrfs (since Linux 3.1)
- OCFS (since Linux 3.2)
- XFS (since Linux 3.5)
- ext4 (since Linux 3.8)
- tmpfs (since Linux 3.8)
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
[MS-FSCC] specifies:
The number of FILE_ALLOCATED_RANGE_BUFFER elements returned is
computed by dividing the size of the returned output buffer (from
either SMB or SMB2, the lower-layer protocol that carries the FSCTL)
by the size of the FILE_ALLOCATED_RANGE_BUFFER element.
Ideally, this requirement could be defined in idl with the following:
[flag(NDR_REMAINING)] file_alloced_range_buf array[];
However, this is not currently supported by PIDL, so just use an opaque
data blob for now.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
FSCTL_SET_ZERO_DATA can be used in two ways.
- When requested against a file marked as sparse, it provides a
mechanism for requesting that the server deallocate the underlying
disk space for the corresponding zeroed range.
- When requested against a non-sparse file, it indicates that the server
should allocate and zero the corresponding range.
Both use cases can be handled in Samba using fallocate(). The Linux
specific FALLOC_FL_PUNCH_HOLE flag can be used to deallocate the
underlying disk space. After doing so, a normal fallocate() call can
be used to ensure that the zeroed range is allocated on non-sparse
files.
FSCTL_SET_ZERO_DATA requests must not result in a change to the file
size. The FSCTL_SET_ZERO_DATA handler always calls fallocate() with the
KEEP_SIZE flag set, ensuring that Samba meets this requirement.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
If Samba is configured with FALLOC_FL_PUNCH_HOLE support, then allow
sys_fallocate() to propogate the flag to syscall invocation.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add a configure time check for the FALLOC_FL_PUNCH_HOLE Linux specific
fallocate() flag. It's been around since 2.6.38.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The Linux fallocate syscall offers a mode parameter which can take the
following flags:
FALLOC_FL_KEEP_SIZE
FALLOC_FL_PUNCH_HOLE (since 2.6.38)
FALLOC_FL_COLLAPSE_RANGE (since 3.15)
FALLOC_FL_ZERO_RANGE (since 3.14)
The flags are not exclusive, e.g. FALLOC_FL_PUNCH_HOLE must be specified
alongside FALLOC_FL_KEEP_SIZE.
Samba currently takes a vfs_fallocate_mode enum parameter for the VFS
fallocate hook, taking either an EXTEND_SIZE or KEEP_SIZE value. This
commit changes the fallocate hook such that it accepts a uint32_t flags
parameter, in preparation for PUNCH_HOLE and ZERO_RANGE support.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
If a user group lookup has aleady been done before with a machine
account we did always return the incomplete information from the cache.
This patch makes sure we return the correct group information from the
netsamlogon cache.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11143
Pair-Programmed-With: Andreas Schneider <asn@samba.org>
Signed-off-by: Michael Adam <obnox@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Mon Mar 9 19:23:25 CET 2015 on sn-devel-104
This test only checks for S4U2Self of the same user, but shows
that a user account is not a valid service for this purpose.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Mon Mar 9 12:10:09 CET 2015 on sn-devel-104
This is now handled properly by samba_kdc_lookup_server() and this wrapper actually
breaks things.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sun Mar 8 20:52:43 CET 2015 on sn-devel-104
If a destructor returns failure (-1) when freeing a child, talloc
must then reparent the child.
Firstly it tries the owner of any reference, next the parent of the
current object calling _talloc_free_children_internal(), and finally
the null context in the last resort.
If a destructor reparented its own object, which can be a very
desirable thing to do (a destructor can make a decision it isn't
time to die yet, and as the parent may be going away it might
want to move itself to longer-term storage) then this new parent
gets overwritten by the existing reparenting logic.
This patch checks when freeing a child if it already reparented
itself, and if it did doesn't then overwrite the new parent.
Makes destructors more flexible.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ira Cooper <ira@samba.org>
If the destructor itself calls talloc_set_destructor()
and returns -1, the new destructor set is overwritten
by talloc.
Dectect that and leave the new destructor in place.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ira Cooper <ira@samba.org>
Signed-off-by: Richard Sharpe <rsharpe@samba.org>
Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Ira Cooper <ira@samba.org>
Autobuild-Date(master): Sun Mar 8 00:43:08 CET 2015 on sn-devel-104
During initial wire trace analysis, the DCE/RPC PDU verification trailer
was incorrectly identified and tagged in IDL as an FSRVP "magic" blob.
This change removes the incorrectly tagged FSRVP request fields and
corresponding test code - with 1e1b7b1021b16e3ab61c2fca8328c94e60a2c99c
verification trailer parsing is now tested separately.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Mar 7 20:01:20 CET 2015 on sn-devel-104
The trigger for this is that Coverity got confused by the dual use of &xid
as an array with the implicit length equality between wb_sids2xids_send
and the array passed in to wb_sids2xids_recv for the result.
I don't want to start doing things just for the Coverity scan, but this
makes the code clearer to me by removing this implicit expected array
length equality.
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sat Mar 7 15:28:59 CET 2015 on sn-devel-104
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Mar 6 20:11:52 CET 2015 on sn-devel-104
This matches our other binaries, and allows samba-tool commands to run with the machine account.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
I think Coverity is right here: Before the preceding call to
krb5_make_principal we already krb5_free_principal(ctx, tmp_creds.server)
without wiping out tmp_creds.server. The call to krb5_make_principal only
stores something fresh when it also returns 0 a.k.a. success.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Fri Mar 6 17:38:09 CET 2015 on sn-devel-104
In future we may get also runtime tests for profiling...
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Dec 15 16:20:14 CET 2014 on sn-devel-104
(cherry picked from commit 4958fcdfa30fd9d8dc51ceafaab35721e61e72c7)
What?
This patch gets rid of the central shared memory segment referenced by
"profile_p". Instead, every smbd gets a static profile_area where it collects
profiling data. Once a second, every smbd writes this profiling data into a
record of its own in a "smbprofile.tdb". smbstatus -P does a tdb_traverse on this
database and sums up what it finds.
Why?
At least in my perception sysv IPC has not the best reputation on earth. The
code before this patch uses shmat(). Samba ages ago has developed a good
abstraction of shared memory: It's called tdb.
The main reason why I started this is that I have a request to become
more flexible with profiling data. Samba should be able to collect data
per share or per user, something which is almost impossible to do with
a fixed structure. My idea is to for example install a profile area per
share and every second marshall this into one tdb record indexed by share
name. smbstatus -P would then also collect the data and either aggregate
them or put them into individual per-share statistics. This flexibility
in the data model is not really possible with one fixed structure.
But isn't it slow?
Well, I don't think so. I can't really prove it, but I do believe that on large
boxes atomically incrementing a shared memory value for every SMB does show up
due to NUMA effects. With this patch the hot code path is completely
process-local. Once a second every smbd writes into a central tdb, this of
course does atomic operations. But it's once a second, not on every SMB2 read.
There's two places where I would like to improve things: With the current code
all smbds wake up once a second. With 10,000 potentially idle smbds this will
become noticable. That's why the current only starts the timer when something has
changed.
The second place is the tdb traverse: Right now traverse is blocking in the
sense that when it has to switch hash chains it will block. With mutexes, this
means a syscall. I have a traverse light in mind that works as follows: It
assumes a locked hash chain and then walks the complete chain in one run
without unlocking in between. This way the caller can do nonblocking locks in
the first round and only do blocking locks in a second round. Also, a lot of
syscall overhead will vanish. This way smbstatus -P will have almost zero
impact on normal operations.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Change-Id: Ieaefdc77495e27bad791075d985a70908e9be1ad
Signed-off-by: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Mar 6 07:11:43 CET 2015 on sn-devel-104
