IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
qcs instances for bidirectional streams are inserted in
<qcc.opening_list>. It is removed from the list once a full HTTP request
has been parsed. This is required to implement http-request timeout.
In case a stream is deleted before receiving full HTTP request, it also
must be removed from <qcc.opening_list>. This was not the case on first
implementation but has been fixed by the following patch :
641a65ff3cccd394eed49378c6ccdb8ba0a101a7
BUG/MINOR: mux-quic: remove qcs from opening-list on free
This means that now a stream can be deleted from the list in two
different functions. Sadly, as LIST_DELETE was used in both cases,
nothing prevented a double-deletion from the list, even though
LIST_INLIST was used. Both calls are replaced with LIST_DEL_INIT which
is idempotent.
This bug causes memory corruption which results in most cases in a
segfault, most of times outside of mux-quic code itself. It has been
found first by gabrieltz who reported it on the github issue #1903. Big
thanks to him for his testing.
This bug also causes failures on several 'M' transfer testcase of QUIC
interop-runner. The s2n-quic client is particularly useful in this case
as segfaults triggers were most of the times on the LIST_DELETE
operation itself. This is probably due to its encapsulating of HEADERS
frame with fin bit delayed in a following empty STREAM frame.
This must be backported wherever the above patch is, up to 2.6.
We don't need to know very accurately how much RAM is needed in a pool,
however we must not spend time competing with other threads trying to be
the one with the most accurate value. Let's use the "_opportunistic"
variants of swrate_add() which will simply cause some updates to be
dropped in case of thread contention. This should significantly improve
the situation when dealing with many threads and small per-thread caches.
Performance gains of up to 1-2% were observed on 48-thread systems thanks
to this alone.
Some uses of swrate_add() only consist in getting a rough estimate of
a frequency. There are cases where speed matters more than accuracy
(e.g. pools). For such use cases, let's just stop looping on the CAS,
if the update fails, another thread is already providing input, and
it's not dramatic to lose the race. All these functions are now
suffixed with "_opportunistic".
Till now it was only possible to change the thread local hot cache size
at build time using CONFIG_HAP_POOL_CACHE_SIZE. But along benchmarks it
was sometimes noticed a huge contention in the lower level memory
allocators indicating that larger caches could be beneficial, especially
on machines with large L2 CPUs.
Given that the checks against this value was no longer on a hot path
anymore, there was no reason for continuing to force it to be tuned at
build time. So this patch allows to set it by tune.memory-hot-size.
It's worth noting that during the boot phase the value remains zero so
that it's possible to know if the value was set or not, which opens the
possibility that we try to automatically adjust it based on the per-cpu
L2 cache size or the use of certain protocols (none of this is done yet).
Performance profiling on a 48-thread machine showed a lot of time spent
in pool_free(), precisely at the point where pool->limit was retrieved.
And the reason is simple. Some parts of the pool_head are heavily updated
only when facing a cache miss ("allocated", "used", "needed_avg"), while
others are always accessed (limit, flags, size). The fact that both
entries were stored into the same cache line makes it very difficult for
each thread to access these precious info even when working with its own
cache.
By just splitting the fields apart, a test on QUIC (which stresses pools
a lot) more than doubled performance from 42 Gbps to 96 Gbps!
Given that the patch only reorders fields and addresses such a significant
contention, it should be backported to 2.7 and 2.6.
It is possible to block the stats applet if a line exceeds the free space in
the responsse buffer while the buffer is empty. It is only an issue in HTTP
becaues of the HTX overhead and, AFAIK, only with json output.
In this case, the applet is unable to write anything in the response buffer
and waits for some free space to proceed further. On the other hand, because
the response channel is empty, nothing is sent and thus no space can be
freed. At this stage, the stream and the applet are blocked waiting for the
other side.
To avoid this situation, we must take care to not dump a line exceeding the
free space in the HTX message. It means we cannot rely anymore on the global
trash buffer. At least, not directly. The trick is to use a local trash
buffer, mapped on the global one but with a different size. We use b_make()
to do so. The local trash buffer is thread local to avoid any concurrency
issue.
It is a valid fix. However it could be good to review the internal API of
the stats applet to not rely on a global variable.
This patch should solve the #1873. It must be backported at least as far as
2.6. Older versions must be evaluated first but it is probably possible to
hit this bug with long proxy/server names.
During the request parsing, we must be sure to never handle errors at the
mux level if the connection is running (or closing). The error must be
handled by the upper layer.
It should never happen. But there is an edge case that was not properly
handled. If all data are received on the first packet with the read0 and the
request is truncated on the payload, in this case the stream-connector is
created, so the H1C is in RUNNING state. But an error is reported because
the request is truncated. In this specific case, the error is handled by the
mux while it should not.
This patch is related to #1966. It must be backported to 2.7.
When an error occurred during the request parsing while the stream is not
running, an EOS must be reported. It is not an issue for an embryonic
connection because the H1 stream is orphan. However, it is an issue with
connections upgraded from TCP to H1. In this case, the upgrade is not
performed because there is an early error. However the H1 stream is not
orphan and is not destroyed. The H1 multiplexer will wait for the detach
event. But without EOS, the upper layer is unable to perform the shutdown.
This patch is related to #1966. It must be backported to 2.7. Older versions
are not affected by this issue.
testdir can be a very long directory since it depends on source
directory path, this can lead to failure during tests when UNIX socket
path exceeds maximum allowed length of 97 characters as defined in
str2sa_range().
16:48:14 [ALERT] *** h1 debug| (10082) : config : parsing [/tmp/haregtests-2022-12-17_16-47-39.4RNzIN/vtc.4850.5d0d728a/h1/cfg:19] : 'bind' : socket path 'unix@/local/p4clients/pkgbuild-bB20r/workspace/build/HAProxy/HAProxy-2.7.x.68.0/AL2_x86_64/DEV.STD.PTHREAD/build/private/HAProxy-2.7.x/src/reg-tests/lua/srv3' too long (max 97)
Also, it is not advisable to create UNIX socket in actual source
directory, but instead use dedicated temporary directory create for test
purpose.
This should be backported to 2.6
peers-t.h uses "struct stktable" as well as STKTABLE_DATA_TYPES which
are defined in stick-table-t.h. It works by accident because
stick-table-t.h was always included before. But could provoke build
issue with EXTRA code.
To be backported as far as 2.2.
The test still need to have more start condition, like ulimit checks
and less strict value checks.
To be backported where it was activated (as far as 2.5)
With gcc-11.2 and binutils-2.37 I'm getting link errors due to multiply
defined symbols when enabling USE_51DEGREES_V4. This is caused by two
variables being present in hash.h instead of hash.c, hence they're
defined twice.
This patch just moves them to hash.c and turns their declaration to
extern.
No backport is needed since this was introduced in 2.8-dev.
There is a possible segfault when accessing qc->timer_task in
quic_conn_io_cb() without testing it. It seems however very rare as it
requires several condition to be encounter.
* quic_conn must be in CLOSING state after having sent a
CONNECTION_CLOSE which free the qc.timer_task
* quic_conn handshake must still be in progress : in fact, qc.timer_task
is accessed on this path because of the anti-amplification limit
lifted.
I was unable thus far to trigger it but benchmarking tests seems to have
fire it with the following backtrace as a result :
#0 _task_wakeup (f=4096, caller=0x5620ed004a40 <_.46868>, t=0x0) at include/haproxy/task.h:195
195 state = _HA_ATOMIC_OR_FETCH(&t->state, f);
[Current thread is 1 (Thread 0x7fc714ff1700 (LWP 14305))]
(gdb) bt
#0 _task_wakeup (f=4096, caller=0x5620ed004a40 <_.46868>, t=0x0) at include/haproxy/task.h:195
#1 quic_conn_io_cb (t=0x7fc5d0e07060, context=0x7fc5d0df49c0, state=<optimized out>) at src/quic_conn.c:4393
#2 0x00005620ecedab6e in run_tasks_from_lists (budgets=<optimized out>) at src/task.c:596
#3 0x00005620ecedb63c in process_runnable_tasks () at src/task.c:861
#4 0x00005620ecea971a in run_poll_loop () at src/haproxy.c:2913
#5 0x00005620ecea9cf9 in run_thread_poll_loop (data=<optimized out>) at src/haproxy.c:3102
#6 0x00007fc773c3f609 in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
#7 0x00007fc77372d133 in clone () from /lib/x86_64-linux-gnu/libc.so.6
(gdb) up
#1 quic_conn_io_cb (t=0x7fc5d0e07060, context=0x7fc5d0df49c0, state=<optimized out>) at src/quic_conn.c:4393
4393 task_wakeup(qc->timer_task, TASK_WOKEN_MSG);
(gdb) p qc
$1 = (struct quic_conn *) 0x7fc5d0df49c0
(gdb) p qc->timer_task
$2 = (struct task *) 0x0
This fix should be backported up to 2.6.
This is a follow up of "BUG/MINOR: stats: fix show stat json buffer limitation"
However this time this is purely preemptive as we did not reach the buffer
limitation yet. But now is the proper time so that this won't be an issue
in the upcoming versions.
No backport needed.
json output type is a lot more verbose than other output types.
Because of this and the increasing number of metrics implemented within
haproxy, we are starting to reach max bufsize limit (defaults to 16k)
when dumping stats to json since 2.6-dev1.
This results in stats output being truncated with
"[{"errorStr":"output buffer too short"}]"
This was reported by Gabriel in #1964.
Thanks to "MINOR: stats: introduce stats field ctx", we can now make
multipart (using multiple buffers) dumping, in case a single buffer is not big
enough to hold the complete stat line.
For now, only stats_dump_fields_json() makes use of it as it is by
far the most verbose stats output type.
(csv, typed and html outputs should be good for a while and may use this
capability if the need arises in some distant future)
--
It could be backported to 2.6 and 2.7.
This commit depends on:
- MINOR: stats: provide ctx for dumping functions
- MINOR: stats: introduce stats field ctx
Add a new value in stats ctx: field.
Implement field support in line dumping parent functions
stats_print_proxy_field_json() and stats_dump_proxy_to_buffer().
This will allow child dumping functions to support partial line dumping
when needed. ie: when dumping buffer is exhausted: do a partial send and
wait for a new buffer to finish the dump. Thanks to field ctx, the function
can start dumping where it left off on previous (unterminated) invokation.
This is a minor refactor to allow stats_dump_info_* and stats_dump_fields_*
functions to directly access stat ctx pointer instead of explicitly
passing stat ctx struct members to them.
This will allow dumping functions to benefit from upcoming ctx updates.
The certificate chain that gets passed in the SSL_CTX through
SSL_CTX_set1_chain has its reference counter increased by OpenSSL
itself. But since the ssl_sock_load_cert_chain function might create a
brand new certificate chain if none exists in the ckch_data
(sk_X509_new_null), then we ended up returning a new certificate chain
to the caller that was never destroyed.
This patch can be backported to all stable branches but it might need to
be reworked for branches older than 2.4 because of commit ec805a32b9
that refactorized the modified code.
When calling 'show ssl ocsp-response' from the CLI, a temporary buffer
was created in parse_binary when we could just use a local static buffer
instead. This does not change the behavior of the function, it just
simplifies it.
Check return values of htx_add_header()/htx_add_eof() during H3 HEADERS
conversion to HTX. In case of error, the connection is interrupted with
a CONNECTION_CLOSE.
This commit is useful to detect abnormal situation on headers parsing.
It should be backported up to 2.7.
If an error is triggered on H3 HEADERS parsing, the allocated buffer for
HTX data is not freed.
To prevent this memleak, all return path have been centralized using
goto statements.
Also, as a small bonus, offer_buffers() is not called anymore if buffer
is not freed because sedesc has taken it. However this change has
probably no noticeable effect as dynamic buffers management is not
functional currently.
This should be backported up to 2.6.
Cookie header are treated specifically to merge multiple occurences in a
single HTX header. This is treated in a if-block condition inside the
'while (1)' loop for headers parsing. The length value of ist
representing cookie header is set to -1 by http_cookie_register(). The
problem is that then a continue statement is used but without
incrementing 'hdr_idx' to pass on the next header.
This issue was revealed by the introduction of commit :
commit d6fb7a0e0f3a79afa1f4b6fc7b62053c3955dc4a
BUG/MEDIUM: h3: reject request with invalid header name
Before the aformentionned patch, the bug was hidden : on the next while
iteration, all isteq() invocations won't match with cookie header length
now set to -1. htx_add_header() fails silently because length is
invalid. hdr_idx is finally incremented which allows parsing to proceed
normally with the next header.
Now, a cookie header with length -1 do not pass the test on header name
conformance introduced by the above patch. Thus, a spurrious
RESET_STREAM is emitted. This behavior has been reported on the mailing
list by Shawn Heisey who found out that browsers disabled H3 usage due
to the RESET_STREAM received. Big thanks to him for his testing on the
master branch.
This issue is simply resolved by incrementing hdr_idx before continue
statement. It could have been detected earlier if htx_add_header()
return value was checked. This will be the subject of a dedicated commit
outside of the backport scope.
This must be backported up to 2.6.
http_cookie_register() must be called on first invocation with the last
two arguments pointing both to a negative value. After it, they will be
updated to a valid index.
We must never have only the last argument as NULL as this will cause an
invalid array addressing. To clarify this a BUG_ON statement is
introduced.
This is linked to github issue #1967.
In the previous patch (86924532db "BUG/MINOR: mux-h1: Fix test instead a
BUG_ON() in h1_send_error()"), a BUG_ON() condition was inverted by error in
h1_send_error(). The stream-connector must be NULL to be able to destroy the H1
stream.
This patch must be backported with the commit above (to 2.7).
When an error occurred during the request parsing, the H1 multiplexer is
responsible to sent a response to the client and to release the H1 stream
and the H1 connection. In HTTP mode, it is not an issue because at this
stage the H1 connection is in embryonic state. Thus it can be released
immediately.
However, it is a problem if the connection was first upgraded from a TCP
connection. In this case, a stream-connector is attached. The H1 stream is
not orphan. Thus it must not be released at this stage. It must be detached
first. Otherwise a BUG_ON() is triggered in h1s_destroy().
So now, the H1S is destroyed on early errors but only if the H1C is in
embryonic state.
This patch may be related to #1966. It must be backported to 2.7.
Ensure that if a request contains a content-length header it matches
with the total size of following DATA frames. This is conformance with
HTTP/3 RFC 9114.
For the moment, this kind of errors triggers a connection close. In the
future, it should be handled only with a stream reset. To reduce
backport surface, this will be implemented in another commit.
This must be backported up to 2.6. It relies on the previous commit :
MINOR: http: extract content-length parsing from H2
Extract function h2_parse_cont_len_header() in the generic HTTP module.
This allows to reuse it for all HTTP/x parsers. The function is now
available as http_parse_cont_len_header().
Most notably, this will be reused in the next bugfix for the H3 parser.
This is necessary to check that content-length header match the length
of DATA frames.
Thus, it must be backported to 2.6.
RFC 9114 dictates several requirements for pseudo header usage in H3
request. Previously only minimal checks were implemented. Enforce all
the following requirements with this patch :
* reject request with undefined or invalid pseudo header
* reject request with duplicated pseudo header
* reject non-CONNECT request with missing mandatory pseudo header
* reject request with pseudo header after standard ones
For the moment, this kind of errors triggers a connection close. In the
future, it should be handled only with a stream reset. To reduce
backport surface, this will be implemented in another commit.
This must be backported up to 2.6.
Reject request containing invalid header name. This concerns every
header containing uppercase letter or a non HTTP token such as a space.
For the moment, this kind of errors triggers a connection close. In the
future, it should be handled only with a stream reset. To reduce
backport surface, this will be implemented in another commit.
Thanks to Yuki Mogi from FFRI Security, Inc. for having reported this.
This must be backported up to 2.6.
In resolv_update_resolvers_timeout(), the resolvers task timeout is updated
by checking running and waiting resolutions. However, to find the next
wakeup date, MIN() operator is used to compare ticks. Ticks must never be
compared with such operators, tick helper functions must be used, to
properly handled TICK_ETERNITY value. In this case, tick_first() must be
used instead of MIN().
It is an old bug but it is pretty visible since the commit fdecaf6ae4
("BUG/MINOR: resolvers: do not run the timeout task when there's no
resolution"). Because of this bug, the resolvers task timeout may be set to
TICK_ETERNITY, stopping periodic resolutions.
This patch should solve the issue #1962. It must be backported to all stable
versions.
The function computing the excess of events of a frequency counter over the
current period for a target frequency must handle empty counters (no event
and no start date). In this case, no excess must be reported.
Because of this bug, long pauses may be experienced on the bandwith
limitation filter.
This patch must be backported to 2.7.
Check if USE_OBSOLETE_LINK=1 was used so it could run this test when
ASAN is not built, since ASAN require this option.
For this test to work, the ulimit -n value must be big enough.
Could be backported at least to 2.5.
change the expected maxconn from 10000 to 11000 in
automatic_maxconn.vtc
To be backported only if the test failed, the value might be the right
one in previous versions.
With internal proxies using the SSL activated (httpclient for example)
the automatic computation of the maxconn is wrong because these proxies
are always activated by default.
This patch fixes the issue by not counting these internal proxies during
the computation.
Must be backported as far as 2.5.
when *SSL_VERSION="latest" behaviour was introduced, it seems to be fine
for development branches, but too intrusive for stable branches.
let us limit "latest" semantic only for development builds, if branch name
contains "haproxy-" it is supposed to be stable branch, no latest openssl
should be taken
[wla: must be backported as far as 2.6]
Signed-off-by: William Lallemand <wlallemand@haproxy.org>
Use qcs_free() on allocation failure in qcs_new() This ensures that all
qcs content is properly deallocated and prevent memleaks. Most notably,
qcs instance is now removed from qcc tree.
This bug is labelled as MINOR as it occurs only on qcs allocation
failure due to memory exhaustion.
This must be backported up to 2.6.
qcs instances for bidirectional streams are inserted in
<qcc.opening_list>. It is removed from the list once a full HTTP request
has been parsed. This is required to implement http-request timeout.
If a qcs instance is freed before receiving a full HTTP request, it must
be removed from the <qcc.opening_list>. Else a segfault will occur in
qcc_refresh_timeout() when accessing a dangling pointer.
For the moment this bug was not reproduced in production. This is
because there exists only few rare cases where a qcs is freed before
HTTP request parsing. However, as error detection will be improved on
H3, this will occur more frequently in the near future.
This must be backported up to 2.6.
This patch is the follow up of previous fix :
BUG/MINOR: quic: properly handle alloc failure in qc_new_conn()
quic_conn owned socket FD is initialized as soon as possible in
qc_new_conn(). This guarantees that we can safely call
quic_conn_release() on allocation failure. This function uses internally
qc_release_fd() to free the socket FD unless it has been initialized to
an invalid FD value.
Without this patch, a segfault will occur if one inner allocation of
qc_new_conn() fails before qc.fd is initialized.
This change is linked to quic-conn owned socket implementation.
This should be backported up to 2.7.
qc_new_conn() is used to allocate a quic_conn instance and its various
internal members. If one allocation fails, quic_conn_release() is used
to cleanup things.
For the moment, pool_zalloc() is used which ensures that all content is
null. However, some members must be initialized to a special values
to be able to use quic_conn_release() safely. This is the case for
quic_conn lists and its tasklet.
Also, some quic_conn internal allocation functions were doing their own
cleanup on failure without reset to NULL. This caused an issue with
quic_conn_release() which also frees this members. To fix this, these
functions now only return an error without cleanup. It is the caller
responsibility to free the allocated content, which is done via
quic_conn_release().
Without this patch, allocation failure in qc_new_conn() would often
result in segfault. This was reproduced easily using fail-alloc at 10%.
This should be backported up to 2.6.
