IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
H3 SETTINGS emission has recently been delayed. The idea is to send it
with the first STREAM to reduce sendto syscall invocation. This was
implemented in the following patch :
3dd79d378c86b3ebf60e029f518add5f1ed54815
MINOR: h3: Send the h3 settings with others streams (requests)
This patch works fine under nominal conditions. However, it will cause a
crash if a HTTP/3 connection is released before having sent any data,
for example when receiving an invalid first request. In this case,
qc_release will first free qcc.app_ops HTTP/3 application protocol layer
via release callback. Then qc_send is called to emit any closing frames
built by app_ops release invocation. However, in qc_send, as no data has
been sent, it will try to complete application layer protocol
intialization, with a SETTINGS emission for HTTP/3. Thus, qcc.app_ops is
reused, which is invalid as it has been just freed. This will cause a
crash with h3_finalize in the call stack.
This bug can be reproduced artificially by generating incomplete HTTP/3
requests. This will in time trigger http-request timeout without any
data send. This is done by editing qc_handle_strm_frm function.
- ret = qcc_recv(qc->qcc, strm_frm->id, strm_frm->len,
+ ret = qcc_recv(qc->qcc, strm_frm->id, strm_frm->len - 1,
strm_frm->offset.key, strm_frm->fin,
(char *)strm_frm->data);
To fix this, application layer closing API has been adjusted to be done
in two-steps. A new shutdown callback is implemented : it is used by the
HTTP/3 layer to generate GOAWAY frame in qc_release prologue.
Application layer context qcc.app_ops is then freed later in qc_release
via the release operation which is now only used to liberate app layer
ressources. This fixes the problem as the intermediary qc_send
invocation will be able to reuse app_ops before it is freed.
This patch fixes the crash, but it would be better to adjust H3 SETTINGS
emission in case of early connection closing : in this case, there is no
need to send it. This should be implemented in a future patch.
This should fix the crash recently experienced by Tristan in github
issue #1801.
This must be backported up to 2.6.
With quicTLS the set_encruption_secrets callback is always called with
the read_secret and the write_secret.
However this is not the case with libreSSL, which uses the
set_read_secret()/set_write_secret() mecanism. It still provides the
set_encryption_secrets() callback, which is called with a NULL
parameter for the write_secret during the read, and for the read_secret
during the write.
The exchange key was not designed in haproxy to be called separately for
read and write, so this patch allow calls with read or write key to
NULL.
This subsection has been moved from 3.4.9 to 3.3.8 somewhere along
2.4, but the TOC has not been updated - resulting in a invalid
anchor in the HTML version.
Needs to be backported to 2.4+
httpclient_new_from_proxy() is a variant of httpclient_new() which
allows to create the requests from a different proxy.
The proxy and its 2 servers are now stored in the httpclient structure.
The proxy must have been created with httpclient_create_proxy() to be
used.
The httpclient_postcheck() callback will finish the initialization of
all proxies created with PR_CAP_HTTPCLIENT.
httpclient_create_proxy() is a function which creates a proxy that could
be used for the httpclient. It will allocate a proxy, a raw server and
an ssl server.
This patch moves most of the code from httpclient_precheck() into a
generic function httpclient_create_proxy().
The proxy will have the PR_CAP_HTTPCLIENT capability.
This could be used for specifics httpclient instances that needs
different proxy settings.
The init of tcp sink, particularly for SSL, was done
too early in the code, during parsing, and this can cause
a crash specially if nbthread was not configured.
This was detected by William using ASAN on a new regtest
on log forward.
This patch adds the 'struct proxy' created for a sink
to a list and this list is now submitted to the same init
code than the main proxies list or the log_forward's proxies
list. Doing this, we are assured to use the right init sequence.
It also removes the ini code for ssl from post section parsing.
This patch should be backported as far as v2.2
Note: this fix uses 'goto' labels created by commit
'BUG/MAJOR: log-forward: Fix log-forward proxies not fully initialized'
but this code didn't exist before v2.3 so this patch needs to be
adapted for v2.2.
The new functions h2c_show_flags() and h2s_show_flags() decode the flags
state into a string, and are used by dev/flags:
$ ./dev/flags/flags h2c 0x0600
h2c->flags = H2_CF_DEM_IN_PROGRESS | H2_CF_DEM_SHORT_READ
$ ./dev/flags/flags h2s 0x7003
h2s->flags = H2_SF_HEADERS_RCVD | H2_SF_OUTGOING_DATA | H2_SF_HEADERS_SENT \
| H2_SF_ES_SENT | H2_SF_ES_RCVD
Originally in 1.8 we wanted to have an independent mux that could possibly
be disabled and would not impose dependencies on the outside. Everything
would fit into a single C file and that was fine.
Nowadays muxes are unavoidable, and not being able to easily inspect them
from outside is sometimes a bit of a pain. In particular, the flags utility
still cannot be used to decode their flags.
As a first step towards this, this patch moves the flags and enums to
mux_h2-t.h, as well as the two state decoding inline functions. It also
dropped the H2_SS_*_BIT defines that nobody uses. The mux_h2.c file remains
the only one to include that for now.
The new function is fd_show_flags() and it reports known FD flags:
$ ./dev/flags/flags fd 0x000121
fd->flags = FD_POLL_IN | FD_EV_READY_W | FD_EV_ACTIVE_R
Please refer to GH #1859 for more info.
Coverity suspected improper proxy pointer handling.
Without the fix it is considered safe for the moment, but it might not
be the case in the future as we want to keep the ability to have
isolated listeners.
Making sure stop_listener(), pause_listener(), resume_listener()
and listener_release() functions make proper use
of px pointer in that context.
No need for backport except if multi-connection protocols (ie:FTP)
were to be backported as well.
Depending on the timing, the conneciton on lisrv listener may be fully
accepted before any reject. Thus, instead of getting a socket error, an
invalid L7 response is reported. There is no reason to be strick on the
error type. Any failure is good here, because we just want to test the
email-alert feature.
This patch should fix issue #1857. It may be backported as far as 2.2.
Since this counter was added, it was incremented at the wrong place for
client streams. It was incremented when the stream-connector (formely the
conn-stream) was created while it should be done when the H1 stream is
created. Thus, on parsing error, on H1>H2 upgrades or TCP>H1 upgrades, the
counter is not incremented. However, it is always decremented when the H1
stream is destroyed.
On bakcned side, there is no issue.
This patch must be backported to 2.6.
As reported by Ilya and Coverity in issue #1858, since recent commit
eea152ee6 ("BUG/MINOR: signals/poller: ensure wakeup from signals")
which removed the test for the global signal flag from the pollers'
loop, the remaining "wake" flag doesn't need to be tested since it
already participates to zeroing the wait_time and will be caught
on the previous line.
Let's just remove that test now.
The fallback macros for when stdio is not there didn't have the "..."
and were causing build issues on platforms with stricter dependencies
between includes.
This patch adresses the issue #1626.
Adding support for PR_FL_PAUSED flag in the function stats_fill_fe_stats().
The command 'show stat' now properly reports a disabled frontend
using "PAUSED" state label.
This patch depends on the following commits:
- 7d00077fd5 "BUG/MEDIUM: proxy: ensure pause_proxy()
and resume_proxy() own PROXY_LOCK".
- 001328873c "MINOR: listener: small API change"
- d46f437de6 "MINOR: proxy/listener: support for additional PAUSED state"
It should be backported to 2.6, 2.5 and 2.4
This patch is a prerequisite for #1626.
Adding PAUSED state to the list of available proxy states.
The flag is set when the proxy is paused at runtime (pause_listener()).
It is cleared when the proxy is resumed (resume_listener()).
It should be backported to 2.6, 2.5 and 2.4
A minor API change was performed in listener(.c/.h) to restore consistency
between stop_listener() and (resume/pause)_listener() functions.
LISTENER_LOCK was never locked prior to calling stop_listener():
lli variable hint is thus not useful anymore.
Added PROXY_LOCK locking in (resume/pause)_listener() functions
with related lpx variable hint (prerequisite for #1626).
It should be backported to 2.6, 2.5 and 2.4
There was a race involving hlua_proxy_* functions
and some proxy management functions.
pause_proxy() and resume_proxy() can be used directly from lua code,
but that could lead to some race as lua code didn't make sure PROXY_LOCK
was owned before calling the proxy functions.
This patch makes sure it won't happen again elsewhere in the code
by locking PROXY_LOCK directly in resume and pause proxy functions
so that it's not the caller's responsibility anymore.
(based on stop_proxy() behavior that was already safe prior to the patch)
This should be backported to stable series.
Note that the API will likely differ < 2.4
There's no more point keeping functions that are just wrappers around
other ones, let's directly call them from the main entry point. It helps
visually control the mapping between output formats and their definition
and doesn't require to invent long names. For a bit more readability, the
tmpbuf and its size adopted slightly shorter names.
The new function is strm_et_show_flags(). Only the error type is
handled at the moment, as a bit more complex logic is needed to
mix the values and enums present in some fields.
The two new functions are se_show_flags() and sc_show_flags().
Maybe something could be done for SC_ST_* values but as it's a
small enum, a simple switch/case should work fine.
The two new functions are chn_show_analysers() and chn_show_flags().
They work on an existing buffer so one was declared in flags.c for this
purpose. File flags.c does not have to know about channel flags anymore.
Some of our flags have enums inside a mask. The new macro __APPEND_ENUM
is able to deal with that by comparing the flag's value against an exact
one under the mask. One needs to take care of eliminating the zero value
though, otherwise delimiters will not always be properly placed (e.g. if
some flags were dumped before and what remains is exactly zero). The
bits of the mask are cleared only upon exact matches.
The "flags" utility is useful but painful to maintain up to date. This
commit aims at providing a low-maintenance solution to keep flags up to
date, by proposing some macros that build a string from a set of flags
in a way that requires the least possible verbosity.
The idea will be to add an inline function dedicated to this just after
the flags declaration, and enumerate the flags one is interested in, and
that function will fill a string based on them.
Placing this inside the type files allows both haproxy and external tools
like "flags" to use it, but comes with a few constraints. First, the
files will be slightly less readable if these functions are huge, so they
need to stay as compact as possible. Second, the function will need
anprintf() and we don't want to include stdio.h in type files as it
proved to be particularly heavy and to cause definition headaches in
the past.
As such the file here only contains a macro enclosed in #ifdef EOF (that
is defined in stdio), and provides an alternate empty one when no stdio
is defined. This way it's the caller that has to include stdio first or
it won't get anything back, and in practice the locations relying on
this always have it.
The macro has to be used in 3 steps:
- prologue: dumps 0 and exits if the value is zero
- flags: the macro can be recursively called and it will push the
flag from bottom to top so that they appear in the same order as
today without requiring to be declared the other way around
- epilogue: dump remaining flags that were not identified
The macro was arranged so that a single character can be used with no
other argument to declare all flags at once. Example:
#define _(n, ...) __APPEND_FLAG(buf, len, del, flg, n, #n, __VA_ARGS__)
_(0);
_(X_FLAG1, _(X_FLAG2, _(X_FLAG3, _(X_FLAG4))));
_(~0);
#undef _
Existing files will have to be updated to rely on it, and more files
could come soon.
This was added in 2.6 by commit c78a9698e ("MINOR: connection: add a new
flag CO_FL_FDLESS on fd-less connections") but forgotten in flags.c.
This must be backported to 2.6.
The proposed decoding options were not updated after the changes in 2.6,
let's fix that by taking the names from the existing declaration. This
should be backported to 2.6.
we use FreeBSD binary packages that we rebuilt for FreeBSD-13.1
Newer FreeBSD version for package zstd:
To ignore this error set IGNORE_OSVERSION=yes
- package: 1301000
- running kernel: 1300139
Add self-wake in signal_handler() to fix a race condition with a signal
coming in between checking signal_queue_len and entering polling sleep.
The changes in commit 43c891dda ("BUG/MINOR: signals/poller: set the
poller timeout to 0 when there are signals") were insufficient.
Move the signal_queue_len check from the poll implementations to
run_poll_loop() to keep that logic in one place.
The poll loops are terminated either by the parameter wake being set or
wake up due to a write to their poller_wr_pipe by wake_thread() in
signal_handler().
This fixes issue #1841.
Must be backported in every stable version.
Harden the UDP datagram corruption applying it on both sides. This approaches
the conditions of some tests run by the QUIC interop runner developed by
Marten Seeman.
This is the ->finalize application callback which prepares the unidirectional STREAM
frames for h3 settings and wakeup the mux I/O handler to send them. As haproxy is
at the same time always waiting for the client request, this makes haproxy
call sendto() to send only about 20 bytes of stream data. Furthermore in case
of heavy loss, this give less chances to short h3 requests to succeed.
Drawback: as at this time the mux sends its streams by their IDs ascending order
the stream 0 is always embedded before the unidirectional stream 3 for h3 settings.
Nevertheless, as these settings may be lost and received after other h3 request
streams, this is permitted by the RFC.
Perhaps there is a better way to do. This will have to be checked with Amaury.
Must be backported to 2.6.
This was due to a missing check in h3_trace() about the first argument
presence (connection) and h3_parse_settings_frm() which calls TRACE_LEAVE()
without any argument. Then this argument was dereferenced.
Must be backported to 2.6
<qc> variable was confused with <qel>. The consequence was that it was
always the same packet number space which was displayed: the first one (or
the Initial packet number space).
Must be backported to 2.6.
It is possible to speed up the handshake completion but only one time
by connection as mentionned in RFC 9002 "6.2.3. Speeding up Handshake Completion".
Add a flag to prevent this process to be run several times
(see https://www.rfc-editor.org/rfc/rfc9002#name-speeding-up-handshake-compl).
Must be backported to 2.6.
When receiving a signal before entering the poller, and without any
activity in the process, the poller will be entered with a timeout
calculated without checking the signals.
Since commit 4f59d3 ("MINOR: time: increase the minimum wakeup interval
to 60s") the issue is much more visible because it could be stuck for
60s.
When in mworker mode, if a worker quits and the SIGCHLD signal deliver
at the right time to the master, this one could be stuck for the time of
the timeout.
This should fix issue #1841
Must be backported in every stable version.
