IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Indentation of the clock property used a hodgepodge of tabs and spaces.
Make them more consistent (tabs for indentation followed by spaces for
alignment).
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add legacy clocks for SCI for SoCs that do not yet have CCF support.
This is to allow timer devices to be enabled using DT and
will be removed after CCF support is added for each SoC.
This is in keeping with the approach taken for enabling
SCI (serial) devices using DT on these SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8vte
-----END PGP SIGNATURE-----
Merge tag 'renesas-clock3-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Merge "Third Round of Renesas ARM Based SoC Clock Updates for v3.17" from Simon
Horman:
Third Round of Renesas ARM Based SoC Clock Updates for v3.17
* Add legacy clocks for SCI for SoCs that do not yet have CCF support.
This is to allow timer devices to be enabled using DT and
will be removed after CCF support is added for each SoC.
This is in keeping with the approach taken for enabling
SCI (serial) devices using DT on these SoCs.
* tag 'renesas-clock3-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: sh73a0: add CMT1 clock support for DT
ARM: shmobile: r8a7740: add CMT1 clock support for DT
ARM: shmobile: r8a73a4: add CMT1 clock support for DT
ARM: shmobile: r8a7740: add TMU clock support for DT
ARM: shmobile: r8a7778: add TMU clock support for DT
Signed-off-by: Olof Johansson <olof@lixom.net>
- BCM Mobile SMP support
- BRCM STB platform support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZOoN
-----END PGP SIGNATURE-----
Merge tag 'for-3.17/bcm-dt' of git://github.com/broadcom/mach-bcm into next/dt
Merge "ARM: mach-bcm: dt updatees for 3.17" from Matt Porter:
- BCM Mobile SMP support
- BRCM STB platform support
* tag 'for-3.17/bcm-dt' of git://github.com/broadcom/mach-bcm:
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
ARM: brcmstb: add misc. DT bindings for brcmstb
ARM: brcmstb: add CPU binding for Broadcom Brahma15
ARM: dts: enable SMP support for bcm21664
ARM: dts: enable SMP support for bcm28155
devicetree: bindings: document Broadcom CPU enable method
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTzJFGAAoJEHm+PkMAQRiGNzQH/087gQch5K+A2HKvPzjUXq57
G82DJHLONMMq8+NY3Vqhp8g2V8zRbXGJEvMJMsyuscO37Vo7ADcrYo8lqY9w5bIl
h+Zarhkqz0rqRs2SfMMIVzdd2W7MzL+lqj3GplGPxHztw0+qk7PRKILx6eRppGaH
JaD4NfkD5+1vfve/2d1ze9D5pCiw6PFNzjesKZxScQhNhIyLdRamfSTY4r9XeURo
CxpwjphEYfvAcgc39mwzEHPHyKSqULu0By6R8FXQpJ9QjVtzcGEiF+cPqGncpZOR
5ZSyU5e1CpBl9w8o6Lm9ewXmaCSnBU/VFrOwWvZrXfokZedXBOz7KdShU93XFjU=
=0VJM
-----END PGP SIGNATURE-----
Merge tag 'v3.16-rc6' into next/dt
Update to Linux 3.16-rc6 as a dependency for the broadcom changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Armada XP
- New board, Lenovo ix4-300d NAS
- Add Lenovo to vendor-prefixes
- Dove
- Add LCD controllers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ixkt
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-3.17-4' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu DT changes for v3.17 (round 4)" from Jason Cooper"
- Armada XP
- New board, Lenovo ix4-300d NAS
- Add Lenovo to vendor-prefixes
- Dove
- Add LCD controllers
* tag 'mvebu-dt-3.17-4' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS
of: Add Lenovo Group Ltd. to the vendor-prefixes list.
ARM: dts: dove: add DT LCD controllers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a sample DTS which will allow bootup of a board populated
with the BCM7445 chip.
Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Matt Porter <mporter@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Document the Broadcom Brahma B15 GIC implementation as compatible
with the ARM GIC standard.
Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Matt Porter <mporter@linaro.org>
Document the bindings that the Broadcom STB platform needs
for proper bootup.
Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Matt Porter <mporter@linaro.org>
Add the Broadcom Brahma B15 CPU to the DT CPU binding list.
Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Matt Porter <mporter@linaro.org>
Define nodes representing the two Cortex A9 CPUs in a bcm21644 SoC.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Define nodes representing the two Cortex A9 CPUs in a bcm28155 SoC.
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Broadcom mobile SoCs use a ROM-implemented holding pen for
controlled boot of secondary cores. A special register is
used to communicate to the ROM that a secondary core should
start executing kernel code. This enable method is currently
used for members of the bcm281xx and bcm21664 SoC families.
The use of an enable method also allows the SMP operation vector to
be assigned as a result of device tree content for these SoCs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Lenovo Group Ltd. (stylized as lenovo) is a Chinese multinational computer
technology company with headquarters in Beijing, China, and Morrisville, North
Carolina, United States.
http://www.lenovo.com/
Signed-off-by: Benoit Masson <yahoo@perenite.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/1406154923-13612-1-git-send-email-yahoo@perenite.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
- convert to new clock driver
- bring structure in line with recent rk3288 comments
(no soc-nodes, using phandles when adding changes, sorted by address)
- i2c, board-pmic and pwm nodes nodes
- sd card slot and ir receiver on radxa rock
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJT1jA+AAoJEPOmecmc0R2BjLUH/0tqosFsfksVGJY+MX7+foRh
KClPetsBuktT+XbOxg9LkLE8MbBvEMbtMzQDoeUk4sRyBdbX5Je+EYkF4V97KkDv
zSAAfHCXOoPPVJpuxHoVQO/sCRG38oKUhtngTPzY70Lw3Gax8R0bAPRcG8c3R++C
Tep4q8TBkRenSnHBf94rk6kiyfs0ktUAroW4oWVWICPAGpKGpQU9kUpw91QmONe1
RdqUCW3g1yKHXj3n0DYjZmouIwrc/5fybMFH0tgy/PXeGFv02kZz+3ZkBTrWr/uz
yy9hhrIKrBvRbpz0WP5b6Ij5INQBDUSx3/rU2zGnWl2DRZl7YTPAMwXAUJCPLKs=
=wLux
-----END PGP SIGNATURE-----
Merge tag 'v3.17-rockchip-rk3xxx-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "ARM: dts: changes for existing rockchip boards" from Heiko Stuebner:
Collected changes for existing Rockchip boards
- convert to new clock driver
- bring structure in line with recent rk3288 comments
(no soc-nodes, using phandles when adding changes, sorted by address)
- i2c, board-pmic and pwm nodes nodes
- sd card slot and ir receiver on radxa rock
* tag 'v3.17-rockchip-rk3xxx-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rk3188-radxarock: add GPIO IR receiver node
ARM: dts: rockchip: add pwm nodes
ARM: dts: rockchip: add both clocks to uart nodes
ARM: dts: rk3188-radxarock: enable sd-card slot
ARM: dts: add i2c and regulator nodes to rk3188-radxarock
ARM: dts: rockchip: add tps65910 regulator for bqcurie2
ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settings
ARM: dts: rockchip: oder nodes by register address
ARM: dts: rockchip: remove address from pinctrl nodes
ARM: dts: uses handles to reference nodes for changes
ARM: dts: rockchip: add handles for shared nodes that don't have one yet
ARM: dts: rockchip: remove soc subnodes
arm: dts: rockchip: remove obsolete clock gate definitions
ARM: dts: rockchip: move oscillator input clock into main dtsi
ARM: dts: rockchip: add cru nodes and update device clocks to use it
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a dependency for the rk3288 DT updates, the branch should
first get merged through Mike's clk git.
* 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux:
ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER
clk: rockchip: add clock controller for rk3288
dt-bindings: add documentation for rk3288 cru
clk: rockchip: add clock driver for rk3188 and rk3066 clocks
dt-bindings: add documentation for rk3188 clock and reset unit
clk: rockchip: add reset controller
clk: rockchip: add clock type for pll clocks and pll used on rk3066
clk: rockchip: add basic infrastructure for clock branches
clk: composite: improve rate_hw sanity check logic
clk: composite: allow read-only clocks
clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a device tree node for the infrared receiver connected to a
GPIO pin on the Radxa Rock.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds the necessary nodex and pinctrl settings for the Rockchip PWM-driver.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Modified to use the new clock defines and added rk3066 pins.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use the newly ammended dw_8250 clock binding to define both the baudclk as
well as the pclk supplying the ip.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This enables the 2nd i2c bus and adds the act8846 pmic as device.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Curie2 uses a tps659102 as its main pmic, so add the i2c1 and tps65910
node as well as define the used voltages and regulator-names according to
the schematics.
Also fix the supply of the sd0 regulator, as it is supplied by the vio reg.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The pincontroller uses the GRF and PMU syscons nowadays, so should not
contain an address in its device node.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Some nodes that are changed in the dtsi hierarchy do not have handles yet.
As it was suggested in the rk3288 submission to do subsequent nodes changes
through such handle-references, add the missing ones.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Comments received from the rk3288 submission indicated that a generic subnode
to group soc components should not be used.
So to keep all rockchip devicetree files similar, remove it from rk3066 and rk3188.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The clock and reset unit is now provided by the rk3188-cru clock driver and thus
the old style definitions of the gate clocks can go away.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
The clock definitions get a lot shorter due to the soc clocks being handled by
rk3188-cru and only the input clock remains. These can now simply live
in the main rk3xxx.dtsi without affecting readability.
At the same time, rename the node to oscillator, adding a clock-output-names
property to match how the rk3288 handles this.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
This adds a node for the clock and reset unit on rk3188 and rk3066 SoCs and
also updates the device nodes retrieve their clocks from there, instead of
the previous gate clock nodes.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
This allows the "make dtbs" target to work.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
There exist 2 variants using either the act8846 or rk808 as pmic, while the
rest of the board stays the same.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Node definitions shared by all rk3288 based boards.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The new rk3288 needs a bigger gpio space, as it has 9 gpio banks.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The uarts on rk3288 are still compatible with the dw_8250, but located
at a different position and need DEBUG_UART_8250_WORD enabled.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The debug uart settings from the DEBUG_RK3X_UART options are usable on
all Rockchip SoCs from the rk30xx and rk31xx series but not on the
new rk3288 SoCs. Thus clarify their use to prevent confusion.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
As announced parts from ARM they will probably be used in socs shortly.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add the DT fragment for the Marvell Dove LCD controllers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lkml.kernel.org/r/E1XAKGS-0004WE-8h@rmk-PC.arm.linux.org.uk
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
- Armada 375
- Fix ethernet aliases for new node added for v3.17
- Add missing MDIO clock for new node added for v3.17
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=y5gn
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-3.17-3' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu DT changes for v3.17 (round 3)" from Jason Cooper:
- Armada 375
- Fix ethernet aliases for new node added for v3.17
- Add missing MDIO clock for new node added for v3.17
* tag 'mvebu-dt-3.17-3' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Add missing MDIO clock in Armada 375
ARM: mvebu: Add ethernet aliases required by U-Boot
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In Armada 375 SoCs, the MDIO is handled by a separate orion-mdio driver,
despite the register is contained within the "LMS" block of the network
controller.
Therefore we need to add the clock to the MDIO devicetree to prevent the
controller from being accesed with its clock gated. This is needed, for
instance, to be able to load the MDIO driver before the network driver.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1405961296-5846-7-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Here are 2 IIO driver fixes for 3.16-rc6 that resolve some reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPMHxEACgkQMUfUDdst+ymCLgCfe5O5VyAnDYpmnykiJYFIoKOG
f50AoJJEPSMi2chNap5zUlcr+XfcALhG
=VS0g
-----END PGP SIGNATURE-----
Merge tag 'staging-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull more IIO driver fixes from Greg KH:
"Here are two IIO driver fixes for 3.16-rc6 that resolve some reported
issues"
* tag 'staging-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: mma8452: Use correct acceleration units.
iio:core: Handle error when mask type is not separate
Here are 2 USB patches that resolve some reported issues, one with an
odd HUB, and one in the chipidea driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPMHpMACgkQMUfUDdst+ymQIQCeOK2oC0C5h1P7HHAQ4UiGpSgt
MHwAoJfAeqF77RajND+m4ds6hwc5h8IF
=ufek
-----END PGP SIGNATURE-----
Merge tag 'usb-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are two USB patches that resolve some reported issues, one with
an odd HUB, and one in the chipidea driver"
* tag 'usb-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: Check if port status is equal to RxDetect
usb: chipidea: udc: Disable auto ZLP generation on ep0
