IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add dynamic mechanism EDCCA (Energy Detection Clear Channel Assessment)
in track work. Using a fixed-value threshold will make EDCCA particularly
sensitive and cause failure to transmit under certain circumstances.
Therefore, the threshold is dynamically adjusted to make EDCCA suitable
for any situation.
However, in some cases, we will adjust the EDCCA threshold to the highest
level so that urgent transmissions can be performed successfully, such as
scanning.
Finally, in order to observe the EDCCA report in time, add the EDCCA perIC
register macro and EDCCA HW report analysis. EDCCA logs can be displayed
by using the EDCCA debug mask.
Signed-off-by: Yi-Chen Chen <jamie_chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-3-pkshih@realtek.com
The coming dynamic mechanism of EDCCA adjustment will add a function to
dump registers to reflect status. However, if we are not debugging
the mechanism, we don't print anything, so avoid reading registers by
checking debug mask to reduce IO.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-2-pkshih@realtek.com
Clang static checker warns:
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:184:49:
The result of the left shift is undefined due to shifting by '32',
which is greater or equal to the width of type 'u32'.
[core.UndefinedBinaryOperatorResult]
If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined.[1][2]
For example, when using different gcc's compilation optimization options
(-O0 or -O2), the result of '(u32)data << 32' is different. One is 0, the
other is old value of data. Let _rtl8821ae_phy_calculate_bit_shift()'s
return value less than 32 to fix this problem. Warn if bitmask is zero.
[1] https://stackoverflow.com/questions/11270492/what-does-the-c-standard-say-about-bitshifting-more-bits-than-the-width-of-type
[2] https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf
Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree")
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231127013511.26694-2-suhui@nfschina.com
Clang static checker warns:
Value stored to 'v1' is never read [deadcode.DeadStores]
Value stored to 'channel' is never read [deadcode.DeadStores]
Remove them to save some place.
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231127013511.26694-1-suhui@nfschina.com
Commit 4b478bf6bdd8 ("wifi: libertas: drop 16-bit PCMCIA support") reworks
the dependencies for config LIBERTAS, and adds alternative dependencies for
USB, SDIO and SPI.
The config option SDIO however does not exist in the kernel tree. It was
probably intended to refer to the config option MMC, which represents
"MMC/SD/SDIO card support" and is used as dependency by various other
drivers that use SDIO.
Fix the dependency to the config option MMC for declaring the requirement
on provision of SDIO support.
Fixes: 4b478bf6bdd8 ("wifi: libertas: drop 16-bit PCMCIA support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122083047.12774-1-lukas.bulwahn@gmail.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231117093056.873834-13-u.kleine-koenig@pengutronix.de
syzbot was able to trigger a crash [1] in page_pool_unlist()
page_pool_list() only inserts a page pool into a netdev page pool list
if a netdev was set in params.
Even if the kzalloc() call in page_pool_create happens to initialize
pool->user.list, I chose to be more explicit in page_pool_list()
adding one INIT_HLIST_NODE().
We could test in page_pool_unlist() if netdev was set,
but since netdev can be changed to lo, it seems more robust to
check if pool->user.list is hashed before calling hlist_del().
[1]
Illegal XDP return value 4294946546 on prog (id 2) dev N/A, expect packet loss!
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 5064 Comm: syz-executor391 Not tainted 6.7.0-rc2-syzkaller-00533-ga379972973a8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:__hlist_del include/linux/list.h:988 [inline]
RIP: 0010:hlist_del include/linux/list.h:1002 [inline]
RIP: 0010:page_pool_unlist+0xd1/0x170 net/core/page_pool_user.c:342
Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 90 00 00 00 4c 8b a3 f0 06 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 75 68 48 85 ed 49 89 2c 24 74 24 e8 1b ca 07 f9 48 8d
RSP: 0018:ffffc900039ff768 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88814ae02000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88814ae026f0
RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1d57fdc
R10: ffffffff8eabfee3 R11: ffffffff8aa0008b R12: 0000000000000000
R13: ffff88814ae02000 R14: dffffc0000000000 R15: 0000000000000001
FS: 000055555717a380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000002555398 CR3: 0000000025044000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__page_pool_destroy net/core/page_pool.c:851 [inline]
page_pool_release+0x507/0x6b0 net/core/page_pool.c:891
page_pool_destroy+0x1ac/0x4c0 net/core/page_pool.c:956
xdp_test_run_teardown net/bpf/test_run.c:216 [inline]
bpf_test_run_xdp_live+0x1578/0x1af0 net/bpf/test_run.c:388
bpf_prog_test_run_xdp+0x827/0x1530 net/bpf/test_run.c:1254
bpf_prog_test_run kernel/bpf/syscall.c:4041 [inline]
__sys_bpf+0x11bf/0x4920 kernel/bpf/syscall.c:5402
__do_sys_bpf kernel/bpf/syscall.c:5488 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5486 [inline]
__x64_sys_bpf+0x78/0xc0 kernel/bpf/syscall.c:5486
Fixes: 083772c9f972 ("net: page_pool: record pools per netdev")
Reported-and-tested-by: syzbot+f9f8efb58a4db2ca98d0@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231130092259.3797753-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König says:
====================
net: ethernet: Convert to platform remove callback returning void
in (implicit) v1 of this series
(https://lore.kernel.org/netdev/20231117091655.872426-1-u.kleine-koenig@pengutronix.de)
I tried to address the resource leaks in the three cpsw drivers. However
this is hard to get right without being able to test the changes. So
here comes a series that just converts all drivers below
drivers/net/ethernet to use .remove_new() and adds a comment about the
potential leaks for someone else to fix the problem.
See commit 5c5a7680e67b ("platform: Provide a remove callback that
returns no value") for an extended explanation and the eventual goal.
The TL;DR; is to prevent bugs like the three noticed here.
Note this series results in no change of behaviour apart from improving
the error message for the three cpsw drivers from
remove callback returned a non-zero value. This will be ignored.
to
Failed to resume device (-ESOMETHING)
====================
Link: https://lore.kernel.org/r/20231128173823.867512-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Replace the error path returning a non-zero value by an error message
and a comment that there is more to do. With that this patch results in
no change of behaviour in this driver apart from improving the error
message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Replace the error path returning a non-zero value by an error message
and a comment that there is more to do. With that this patch results in
no change of behaviour in this driver apart from improving the error
message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Replace the error path returning a non-zero value by an error message
and a comment that there is more to do. With that this patch results in
no change of behaviour in this driver apart from improving the error
message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiri Pirko says:
====================
devlink: warn about existing entities during reload-reinit
Recently there has been a couple of attempts from drivers to block
devlink reload in certain situations. Turned out, the drivers do not
properly tear down ports and related netdevs during reload.
To address this, add couple of checks to be done during devlink reload
reinit action. Also, extend documentation to be more explicit.
====================
Link: https://lore.kernel.org/r/20231128115255.773377-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During reload-reinit, all entities except for params, resources, regions
and health reporter should be removed and re-added. Add a warning to
be triggered in case the driver behaves differently.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Be more explicit about devlink entities that may stay and that have to
be removed during reload reinit action.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will support arbitrary SYN Cookie with BPF, and then kfunc at
TC will preallocate reqsk and initialise some fields that should
not be overwritten later by cookie_v[46]_check().
To simplify the flow in cookie_v[46]_check(), we move such fields'
initialisation to cookie_tcp_reqsk_alloc() and factorise non-BPF
SYN Cookie handling into cookie_tcp_check(), where we validate the
cookie and allocate reqsk, as done by kfunc later.
Note that we set ireq->ecn_ok in two steps, the latter of which will
be shared by the BPF case. As cookie_ecn_ok() is one-liner, now
it's inlined.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF, and then some reqsk fields
are initialised in kfunc, and others are done in cookie_v[46]_check().
This patch factorises the common part as cookie_tcp_reqsk_init() and
calls it in cookie_tcp_reqsk_alloc() to minimise the discrepancy between
cookie_v[46]_check().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We initialise treq->af_specific in cookie_tcp_reqsk_alloc() so that
we can look up a key later in tcp_create_openreq_child().
Initially, that change was added for MD5 by commit ba5a4fdd63ae ("tcp:
make sure treq->af_specific is initialized"), but it has not been used
since commit d0f2b7a9ca0a ("tcp: Disable header prediction for MD5
flow.").
Now, treq->af_specific is used only by TCP-AO, so, we can move that
initialisation into tcp_ao_syncookie().
In addition to that, l3index in cookie_v[46]_check() is only used for
tcp_ao_syncookie(), so let's move it as well.
While at it, we move down tcp_ao_syncookie() in cookie_v4_check() so
that it will be called after security_inet_conn_request() to make
functions order consistent with cookie_v6_check().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we create a full socket from SYN Cookie, we initialise
tcp_sk(sk)->tsoffset redundantly in tcp_get_cookie_sock() as
the field is inherited from tcp_rsk(req)->ts_off.
cookie_v[46]_check
|- treq->ts_off = 0
`- tcp_get_cookie_sock
|- tcp_v[46]_syn_recv_sock
| `- tcp_create_openreq_child
| `- newtp->tsoffset = treq->ts_off
`- tcp_sk(child)->tsoffset = tsoff
Let's initialise tcp_rsk(req)->ts_off with the correct offset
and remove the second initialisation of tcp_sk(sk)->tsoffset.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_hdr(skb) and SYN Cookie are passed to __cookie_v[46]_check(), but
none of the callers passes cookie other than ntohl(th->ack_seq) - 1.
Let's fetch it in __cookie_v[46]_check() instead of passing the cookie
over and over.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF, and then reqsk
will be preallocated before cookie_v[46]_check().
Depending on how validation fails, we send RST or just drop skb.
To make the error handling easier, let's clean up goto labels.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock_net(sk) is used repeatedly in cookie_v[46]_check().
Let's cache it in a variable.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will grow and cut the xmas tree in cookie_v[46]_check().
This patch cleans it up to make later patches tidy.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a spelling mistake in struct field hc_tx_err_sqpdid_enforecement.
Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231128095304.515492-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
wait_local_port_listen() helper is defined in diag.sh, mptcp_connect.sh,
mptcp_join.sh and simult_flows.sh, export it into mptcp_lib.sh and
rename it with mptcp_lib_ prefix. Use this new helper in all these
scripts.
Note: We only have IPv4 connections in this helper, not looking at IPv6
(tcp6) but that's OK because we only have IPv4 connections here in diag.sh.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-15-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
check_transfer() and print_file_err() helpers are defined both in
mptcp_connect.sh and mptcp_sockopt.sh, export them into mptcp_lib.sh
and rename them with mptcp_lib_ prefix. And use them in all scripts.
Note: In mptcp_sockopt.sh it is OK to drop 'ret=1' in check_transfer()
because it will be set in run_tests() anyway.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-14-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
make_file() helper in mptcp_sockopt.sh and userspace_pm.sh are the same.
Export it into mptcp_lib.sh and rename it as mptcp_lib_kill_wait(). Use
it in both mptcp_connect.sh and mptcp_join.sh.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-13-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mptcp_connect.sh we are missing something like "oflag=append"
because this will write "${rem}" bytes at the beginning of the file
where there is already some random bytes. It should write that at
the end.
This patch adds this missing 'oflag=append' flag for 'dd' command in
make_file().
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-12-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
The helper get_counter() in mptcp_join.sh and get_mib_counter() in
mptcp_connect.sh have the same functionality, export get_counter() into
mptcp_lib.sh and rename it as mptcp_lib_get_counter(). Use this new
helper instead of get_counter() and get_mib_counter().
Use this helper in test_prio() in userspace_pm.sh too instead of
open-coding.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-11-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
is_v6() helper is defined in mptcp_connect.sh, mptcp_join.sh and
mptcp_sockopt.sh, so export it into mptcp_lib.sh and rename it as
mptcp_lib_is_v6(). Use this new helper in all scripts.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-10-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
Export kill_wait() helper in userspace_pm.sh into mptcp_lib.sh and
rename it as mptcp_lib_kill_wait(). It can be used to instead of
kill_wait() in mptcp_join.sh. Use the new helper in both scripts.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-9-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a selftest for userspace PM to remove id 0 address.
Use userspace_pm_add_addr() helper to add an id 10 address, then use
userspace_pm_rm_addr() helper to remove id 0 address.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-8-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a selftest for userspace PM to remove the initial
subflow.
Use userspace_pm_add_sf() to add a subflow, and pass initial IP address
to userspace_pm_rm_sf() to remove the initial subflow.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-7-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The value of 'err' will not be only '-EINVAL', but can be '0' in some
cases.
So it's better to rename the label 'remove_err' to 'out' to avoid
confusions.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-6-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a selftest to create id 0 subflow. Pass id 0 to the
helper userspace_pm_add_sf() to create id 0 subflow. chk_mptcp_info
shows one subflow but chk_subflows_total shows two subflows in each
namespace.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-5-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new argument namespace to userspace_pm_add_addr() and
userspace_pm_add_sf() to make these two helper more versatile.
Add two more versatile helpers for userspace pm remove subflow or address:
userspace_pm_rm_addr() and userspace_pm_rm_sf(). The original test helpers
userspace_pm_rm_sf_addr_ns1() and userspace_pm_rm_sf_addr_ns2() can be
replaced by these new helpers.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-4-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper chk_subflows_total(), in it use the newly
added counter mptcpi_subflows_total to get the "correct" amount of
subflows, including the initial one.
To be compatible with old 'ss' or kernel versions not supporting this
counter, get the total subflows by listing TCP connections that are
MPTCP subflows:
ss -ti state state established state syn-sent state syn-recv |
grep -c tcp-ulp-mptcp.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-3-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper get_info_value(), using 'sed' command to
parse the value of the given item name in the line with the given keyword,
to make chk_mptcp_info() and pedit_action_pkts() more readable.
Also add another helper evts_get_info() to use get_info_value() to parse
the output of 'pm_nl_ctl events' command, to make all the userspace pm
selftests more readable, both in mptcp_join.sh and userspace_pm.sh.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-2-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the initial subflow has been removed, we cannot know without checking
other counters, e.g. ss -ti <filter> | grep -c tcp-ulp-mptcp or
getsockopt(SOL_MPTCP, MPTCP_FULL_INFO, ...) (or others except MPTCP_INFO
of course) and then check mptcp_subflow_data->num_subflows to get the
total amount of subflows.
This patch adds a new counter mptcpi_subflows_total in mptcpi_flags to
store the total amount of subflows, including the initial one. A new
helper __mptcp_has_initial_subflow() is added to check whether the
initial subflow has been removed or not. With this helper, we can then
compute the total amount of subflows from mptcp_info by doing something
like:
mptcpi_subflows_total = mptcpi_subflows +
__mptcp_has_initial_subflow(msk).
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/428
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-1-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Support CFF flood mode
The registers to configure to initialize a flood table differ between the
controlled and CFF flood modes. In therefore needs to be an op. Add it,
hook up the current init to the existing families, and invoke the op.
PGT is an in-HW table that maps addresses to sets of ports. Then when some
HW process needs a set of ports as an argument, instead of embedding the
actual set in the dynamic configuration, what gets configured is the
address referencing the set. The HW then works with the appropriate PGT
entry.
Among other allocations, the PGT currently contains two large blocks for
bridge flooding: one for 802.1q and one for 802.1d. Within each of these
blocks are three tables, for unknown-unicast, multicast and broadcast
flooding:
. . . | 802.1q | 802.1d | . . .
| UC | MC | BC | UC | MC | BC |
\______ _____/ \_____ ______/
v v
FID flood vectors
Thus each FID (which corresponds to an 802.1d bridge or one VLAN in an
802.1q bridge) uses three flood vectors spread across a fairly large region
of PGT.
This way of organizing the flood table (called "controlled") is not very
flexible. E.g. to decrease a bridge scale and store more IP MC vectors, one
would need to completely rewrite the bridge PGT blocks, or resort to hacks
such as storing individual MC flood vectors into unused part of the bridge
table.
In order to address these shortcomings, Spectrum-2 and above support what
is called CFF flood mode, for Compressed FID Flooding. In CFF flood mode,
each FID has a little table of its own, with three entries adjacent to each
other, one for unknown-UC, one for MC, one for BC. This allows for a much
more fine-grained approach to PGT management, where bits of it are
allocated on demand.
. . . | FID | FID | FID | FID | FID | . . .
|U|M|B|U|M|B|U|M|B|U|M|B|U|M|B|
\_____________ _____________/
v
FID flood vectors
Besides the FID table organization, the CFF flood mode also impacts Router
Subport (RSP) table. This table contains flood vectors for rFIDs, which are
FIDs that reference front panel ports or LAGs. The RSP table contains two
entries per front panel port and LAG, one for unknown-UC traffic, and one
for everything else. Currently, the FW allocates and manages the table in
its own part of PGT. rFIDs are marked with flood_rsp bit and managed
specially. In CFF mode, rFIDs are managed as all other FIDs. The driver
therefore has to allocate and maintain the flood vectors. Like with bridge
FIDs, this is more work, but increases flexibility of the system.
The FW currently supports both the controlled and CFF flood modes. To shed
complexity, in the future it should only support CFF flood mode. Hence this
patchset, which adds CFF flood mode support to mlxsw.
Since mlxsw needs to maintain both the controlled mode as well as CFF mode
support, we will keep the layout as compatible as possible. The bridge
tables will stay in the same overall shape, just their inner organization
will change from flood mode -> FID to FID -> flood mode. Likewise will RSP
be kept as a contiguous block of PGT memory, as was the case when the FW
maintained it.
- The way FIDs get configured under the CFF flood mode differs from the
currently used controlled mode. The simple approach of having several
globally visible arrays for spectrum.c to statically choose from no
longer works.
Patch #1 thus privatizes all FID initialization and finalization logic,
and exposes it as ops instead.
- Patch #2 renames the ops that are specific to the controlled mode, to
make room in the namespace for the CFF variants.
Patch #3 extracts a helper to compute flood table base out of
mlxsw_sp_fid_flood_table_mid().
- The op fid_setup configured fid_offset, i.e. the number of this FID
within its family. For rFIDs in CFF mode, to determine this number, the
driver will need to do fallible queries.
Thus in patch #4, make the FID setup operation fallible as well.
- Flood mode initialization routine differs between the controlled and CFF
flood modes. The controlled mode needs to configure flood table layout,
which the CFF mode does not need to do.
In patch #5, move mlxsw_sp_fid_flood_table_init() up so that the
following patch can make use of it.
In patch #6, add an op to be invoked per table (if defined).
- The current way of determining PGT allocation size depends on the number
of FIDs and number of flood tables. RFIDs however have PGT footprint
depending not on number of FIDs, but on number of ports and LAGs, because
which ports an rFID should flood to does not depend on the FID itself,
but on the port or LAG that it references.
Therefore in patch #7, add FID family ops for determining PGT allocation
size.
- As elaborated above, layout of PGT will differ between controlled and CFF
flood modes. In CFF mode, it will further differ between rFIDs and other
FIDs (as described at previous patch). The way to pack the SFMR register
to configure a FID will likewise differ from controlled to CFF.
Thus in patches #8 and #9 add FID family ops to determine PGT base
address for a FID and to pack SFMR.
- Patches #10 and #11 add more bits for RSP support. In patch #10, add a
new traffic type enumerator, for non-UC traffic. This is a combination of
BC and MC traffic, but the way that mlxsw maps these mnemonic names to
actual traffic type configurations requires that we have a new name to
describe this class of traffic.
Patch #11 then adds hooks necessary for RSP table maintenance. As ports
come and go, and join and leave LAGs, it is necessary to update flood
vectors that the rFIDs use. These new hooks will make that possible.
- Patches #12, #13 and #14 introduce flood profiles. These have been
implicit so far, but the way that CFF flood mode works with profile IDs
requires that we make them explicit.
Thus in patch #12, introduce flood profile objects as a set of flood
tables that FID families then refer to. The FID code currently only
uses a single flood profile.
In patch #13, add a flood profile ID to flood profile objects.
In patch #14, when in CFF mode, configure SFFP according to the existing
flood profiles (or the one that exists as of that point).
- Patches #15 and #16 add code to implement, respectively, bridge FIDs and
RSP FIDs in CFF mode.
- In patch #17, toggle flood_mode_prefer_cff on Spectrum-2 and above, which
makes the newly-added code live.
====================
Link: https://lore.kernel.org/r/cover.1701183891.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In this patch, add the artifacts for the rFID family that works in CFF
flood mode.
The same that was said about PGT organization and lookup in bridge FID
families applies for the rFID family as well. The main difference lies in
the fact that in the controlled flood mode, the FW was taking care of
maintaining the PGT tables for rFIDs. In CFF mode, the responsibility
shifts to the driver.
All rFIDs are based off either a front panel port, or a LAG port. For those
based off ports, we need to maintain at worst one PGT block for each port,
for those based off LAGs, one PGT block per LAG. This reflects in the
pgt_size callback, which determines the PGT footprint based on number of
ports and the LAG capacity.
A number of FIDs may end up using the same PGT base. Unlike with bridges,
where membership of a port in a given FID is highly dynamic, an rFID based
of a port will just always need to flood to that port.
Both the port and the LAG subtables need to be actively maintained. To that
end, the CFF rFID family implements fid_port_init and fid_port_fini
callbacks, which toggle the necessary bits.
Both FID-MID translation and SFMR packing then point into either the port
or the LAG subtable, to the block that corresponds to a given port or a
given LAG, depending on what port the RIF bound to the rFID uses.
As in the previous patch, the way CFF flood mode organizes PGT accesses
allows for much more smarts and dynamism. As in the previous patch, we
rather aim to keep things simple and static.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/962deb4367585d38250e80c685a34735c0c7f3ad.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In this patch, add the artifacts for 802.1d and 802.1q FID families that
work in CFF flood mode.
In CFF flood mode, the way flood vectors are looked up changes: there's a
per-FID PGT base, to which a small offset is added depending on type of
traffic. Thus each FID occupies a small contiguous block of PGT memory,
whereas in the controlled flood mode, flood vectors for a given FID were
spread across the PGT.
The term "flood table" as used by the spectrum_fid module, borrows from
controlled flood mode way of organizing the PGT table. There flood tables
were actual tables, contiguous in the PGT. In the CFF flood mode, they are
more abstract: a flood table becomes a collection of e.g. all first rows of
the per-FID PGT blocks. Nonetheless we retain the nomenclature.
FIDs are still configured through the SFMR register, but there are
different fields to set under CFF mode: PGT base and profile. Thus register
packing gets a dedicated op overload as well.
The new organization of PGT makes it possible to treat the PGT as a block
of an ordinary memory, allocate and deallocate on demand, and achieve
better flexibility. Here instead, we aim to keep the code as close as
possible to the previous controlled flood mode, support for which we need
to retain for Spectrum-1 and older FW versions anyway. Thus the PGT
footprint of the individual families is the same as before, just the
internal organization of the per-family PGT region differs. Hence the
pgt_size callback is reused between the controlled and CFF flood modes.
Since the dummy family has no flood tables in either the CTL mode or in
CFF mode, the existing one can be reused for the CFF family array.
Users should not notice any changes between the controlled and CFF flood
modes.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/ca40b8163e6d6a21f63ef299619acee953cf9519.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In CFF flood mode, the way flood vectors are looked up changes: there's a
per-FID PGT base, to which a small offset is added depending on type of
traffic. Thus each FID occupies a small contiguous block of PGT memory,
whereas in the controlled flood mode, flood vectors for a given FID were
spread across the PGT.
Each FID is associated with one of a handful of profiles. The profile and
the traffic type are then used as keys to look up the PGT offset. This
offset is then added to the per-FID PGT base. The profile / type / offset
mapping needs to be configured by the driver, and is only relevant in CFF
flood mode.
In this patch, add the SFFP initialization code. Only initialize the one
profile currently explicitly used. As follow-up patch add more profiles,
this code will pick them up and initialize as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/2c4733ed72d439444218969c032acad22cd4ed88.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
