IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
set_xgmi_plpd_mode may be unsupported and this isn't error, no need to
print warning for it.
v2: add ret2 to save the status of psp_ras_trigger_error.
Suggested-by: lijo.lazar@amd.com
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull watchdog updates from Wim Van Sebroeck:
- add support for Amlogic C3 and S4 SoCs
- add IT8613 ID
- add MSM8226 and MSM8974 compatibles
- other small fixes and improvements
* tag 'linux-watchdog-6.7-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
dt-bindings: watchdog: Add support for Amlogic C3 and S4 SoCs
watchdog: mlx-wdt: Parameter desctiption warning fix
watchdog: aspeed: Add support for aspeed,reset-mask DT property
dt-bindings: watchdog: aspeed-wdt: Add aspeed,reset-mask property
watchdog: apple: Deactivate on suspend
dt-bindings: watchdog: qcom-wdt: Add MSM8226 and MSM8974 compatibles
dt-bindings: watchdog: fsl-imx7ulp-wdt: Add 'fsl,ext-reset-output'
wdog: imx7ulp: Enable wdog int_en bit for watchdog any reset
drivers: watchdog: marvell_gti: Program the max_hw_heartbeat_ms
drivers: watchdog: marvell_gti: fix zero pretimeout handling
watchdog: marvell_gti: Replace of_platform.h with explicit includes
watchdog: imx_sc_wdt: continue if the wdog already enabled
watchdog: st_lpc: Use device_get_match_data()
watchdog: wdat_wdt: Add timeout value as a param in ping method
watchdog: gpio_wdt: Make use of device properties
sbsa_gwdt: Calculate timeout with 64-bit math
watchdog: ixp4xx: Make sure restart always works
watchdog: it87_wdt: add IT8613 ID
watchdog: marvell_gti_wdt: Fix error code in probe()
Watchdog: marvell_gti_wdt: Remove redundant dev_err_probe() for platform_get_irq()
...
Pull pwm updates from Thierry Reding:
"This contains a few fixes and a bunch of cleanups, a lot of which is
in preparation for Uwe's character device support that may be ready in
time for the next merge window"
* tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: samsung: Document new member .channel in struct samsung_pwm_chip
pwm: bcm2835: Add support for suspend/resume
pwm: brcmstb: Checked clk_prepare_enable() return value
pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
pwm: pxa: Explicitly include correct DT includes
pwm: cros-ec: Simplify using devm_pwmchip_add() and dev_err_probe()
pwm: samsung: Consistently use the same name for driver data
pwm: vt8500: Simplify using devm functions
pwm: sprd: Simplify using devm_pwmchip_add() and dev_err_probe()
pwm: sprd: Provide a helper to cast a chip to driver data
pwm: spear: Simplify using devm functions
pwm: mtk-disp: Simplify using devm_pwmchip_add()
pwm: imx-tpm: Simplify using devm functions
pwm: brcmstb: Simplify using devm functions
pwm: bcm2835: Simplify using devm functions
pwm: bcm-iproc: Simplify using devm functions
pwm: Adapt sysfs API documentation to reality
pwm: dwc: add PWM bit unset in get_state call
pwm: dwc: make timer clock configurable
pwm: dwc: split pci out of core driver
...
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
There was a wrong assumption that with CONFIG_CIFS_DFS_UPCALL=y there
would always be a dns_resolver key set up so we could unconditionally
upcall to resolve UNC hostname rather than using the value provided by
mount(2).
Only require it when performing automount of junctions within a DFS
share so users that don't have dns_resolver key still can mount their
regular shares with server hostname resolved by mount.cifs(8).
Fixes: 348a04a8d1 ("smb: client: get rid of dfs code dep in namespace.c")
Cc: stable@vger.kernel.org
Tested-by: Eduard Bachmakov <e.bachmakov@gmail.com>
Reported-by: Eduard Bachmakov <e.bachmakov@gmail.com>
Closes: https://lore.kernel.org/all/CADCRUiNvZuiUZ0VGZZO9HRyPyw6x92kiA7o7Q4tsX5FkZqUkKg@mail.gmail.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch leverages the alternative mechanism to dynamically optimize
bitops (including __ffs, __fls, ffs, fls) with Zbb instructions. When
Zbb ext is not supported by the runtime CPU, legacy implementation is
used. If Zbb is supported, then the optimized variants will be selected
via alternative patching.
The legacy bitops support is taken from the generic C implementation as
fallback.
If the parameter is a build-time constant, we leverage compiler builtin to
calculate the result directly, this approach is inspired by x86 bitops
implementation.
EFI stub runs before the kernel, so alternative mechanism should not be
used there, this patch introduces a macro NO_ALTERNATIVE for this purpose.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231031064553.2319688-3-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 6ac19f9651 ("arm64: avoid prototype warnings for syscalls")
added missing declarations to various syscall wrapper macros. It
however proved a little too zealous in __SYSCALL_DEFINEx(), as a
declaration for __arm64_sys##name was already present. A declaration
is required before the call to ALLOW_ERROR_INJECTION(), so keep
the original one and remove the new one.
Fixes: 6ac19f9651 ("arm64: avoid prototype warnings for syscalls")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231109141153.250046-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231107151223.3971602-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes xfstest generic/728 which had been failing due to incorrect
ctime after setxattr and removexattr
Update ctime on successful set of xattr
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The delayed work for reconnect takes server struct
as a parameter. But it does so without holding a ref
to it. Normally, this may not show a problem as
the reconnect work is only cancelled on umount.
However, since we now plan to support scaling down of
channels, and the scale down can happen from reconnect
work itself, we need to fix it.
This change takes a reference on the server struct
before it is passed to the delayed work. And drops
the reference in the delayed work itself. Or if
the delayed work is successfully cancelled, by the
process that cancels it.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The only reason why cifs_sb gets passed today to cifs_try_adding_channels
is to pass the local_nls field for the new channels and binding session.
However, the ses struct already has local_nls field that is setup during
the first cifs_setup_session. So there is no need to pass cifs_sb.
This change removes cifs_sb from the arg list for this and the functions
that it calls and uses ses->local_nls instead.
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The refcounting of server interfaces should account
for the primary channel too. Although this is not
strictly necessary, doing so will account for the primary
channel in DebugData.
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Today, if the server interfaces RSS capable, we simply
choose the fastest interface to setup a channel. This is not
a scalable approach, and does not make a lot of attempt to
distribute the connections.
This change does a weighted distribution of channels across
all the available server interfaces, where the weight is
a function of the advertised interface speed.
Also make sure that we don't mix rdma and non-rdma for channels.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
So far, SMB multichannel could only scale up, but not
scale down the number of channels. In this series of
patch, we now allow the client to deal with the case
of multichannel disabled on the server when the share
is mounted. With that change, we now need the ability
to scale down the channels.
This change allows the client to deal with cases of
missing channels more gracefully.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Proposed patch fixes initialization of CSC3551 on the UM5302LA laptop.
Patching DSDT table is not required since ASUS did added _DSD entry.
Nothing new introduced but reused work started by Stefan B.
Currently there is no official firmware available for 10431A83 on
cirrus git unfortunately.
For testing used 104317f3 (which is also seems on i2c bus):
$ cd /lib/firmware/cirrus/ && \
for fw in $(find ./ -name '*104317f3*'); do newfw=$(echo $fw | sed 's/104317f3/10431a83/g'); echo echo "$fw -> $newfw"; ln -s $f $newfw; done
With the patch applied to 6.6.0 and obviously symlinks to 104317F3 FW,
speakers works and to my susrprise they sound quite good and loud
without distortion.
Probably confirmation from cirrus team is needed on firmware.
Signed-off-by: Vitalii Torshyn <vitaly.torshyn@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218119
Link: https://lore.kernel.org/r/CAHiQ-bCMPpCJ8eOYAaVVoqGkFixS1qTgSS4xfbZvL4oZV9LYew@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As reported recently, ALSA core info helper may cause a deadlock at
the forced device disconnection during the procfs operation.
The proc_remove() (that is called from the snd_card_disconnect()
helper) has a synchronization of the pending procfs accesses via
wait_for_completion(). Meanwhile, ALSA procfs helper takes the global
mutex_lock(&info_mutex) at both the proc_open callback and
snd_card_info_disconnect() helper. Since the proc_open can't finish
due to the mutex lock, wait_for_completion() never returns, either,
hence it deadlocks.
TASK#1 TASK#2
proc_reg_open()
takes use_pde()
snd_info_text_entry_open()
snd_card_disconnect()
snd_info_card_disconnect()
takes mutex_lock(&info_mutex)
proc_remove()
wait_for_completion(unused_pde)
... waiting task#1 closes
mutex_lock(&info_mutex)
=> DEADLOCK
This patch is a workaround for avoiding the deadlock scenario above.
The basic strategy is to move proc_remove() call outside the mutex
lock. proc_remove() can work gracefully without extra locking, and it
can delete the tree recursively alone. So, we call proc_remove() at
snd_info_card_disconnection() at first, then delete the rest resources
recursively within the info_mutex lock.
After the change, the function snd_info_disconnect() doesn't do
disconnection by itself any longer, but it merely clears the procfs
pointer. So rename the function to snd_info_clear_entries() for
avoiding confusion.
The similar change is applied to snd_info_free_entry(), too. Since
the proc_remove() is called only conditionally with the non-NULL
entry->p, it's skipped after the snd_info_clear_entries() call.
Reported-by: Shinhyung Kang <s47.kang@samsung.com>
Closes: https://lore.kernel.org/r/664457955.21699345385931.JavaMail.epsvc@epcpadp4
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231109141954.4283-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is really just a single patch, but since the offending fix hasn't
yet made it to my for-next I'm merging it here.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The riscv_of_processor_hartid() used by riscv_of_parent_hartid() fails
for HARTs disabled in the DT. This results in the following warning
thrown by the RISC-V INTC driver for the E-core on SiFive boards:
[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
The riscv_of_parent_hartid() is only expected to read the hartid
from the DT so we directly call of_get_cpu_hwid() instead of calling
riscv_of_processor_hartid().
Fixes: ad635e723e ("riscv: cpu: Add 64bit hartid support on RV64")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20231027154254.355853-2-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-11-06 (ice)
This series contains updates to ice driver only.
Dave removes SR-IOV LAG attribute for only the interface being disabled
to allow for proper unwinding of all interfaces.
Michal Schmidt changes some LAG allocations from GFP_KERNEL to GFP_ATOMIC
due to non-allowed sleeping.
Aniruddha and Marcin fix redirection and drop rules for switchdev by
properly setting and marking egress/ingress type.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix VF-VF direction matching in drop rule in switchdev
ice: Fix VF-VF filter rules in switchdev mode
ice: lag: in RCU, use atomic allocation
ice: Fix SRIOV LAG disable on non-compliant aggregate
====================
Link: https://lore.kernel.org/r/20231107004844.655549-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-11-06 (i40e)
This series contains updates to i40e driver only.
Ivan Vecera resolves a couple issues with devlink; removing a call to
devlink_port_type_clear() and ensuring devlink port is unregistered
after the net device.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix devlink port unregistering
i40e: Do not call devlink_port_type_clear()
====================
Link: https://lore.kernel.org/r/20231107003600.653796-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add missing netfilter modules description to fix W=1, from Florian Westphal.
2) Fix catch-all element GC with timeout when use with the pipapo set
backend, this remained broken since I tried to fix it this summer,
then another attempt to fix it recently.
3) Add missing IPVS modules descriptions to fix W=1, also from Florian.
4) xt_recent allocated a too small buffer to store an IPv4-mapped IPv6
address which can be parsed by in6_pton(), from Maciej Zenczykowski.
Broken for many releases.
5) Skip IPv4-mapped IPv6, IPv4-compat IPv6, site/link local scoped IPv6
addressses to set up IPv6 NAT redirect, also from Florian. This is
broken since 2012.
* tag 'nf-23-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
====================
Link: https://lore.kernel.org/r/20231108155802.84617-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-08
We've added 16 non-merge commits during the last 6 day(s) which contain
a total of 30 files changed, 341 insertions(+), 130 deletions(-).
The main changes are:
1) Fix a BPF verifier issue in precision tracking for BPF_ALU | BPF_TO_BE |
BPF_END where the source register was incorrectly marked as precise,
from Shung-Hsi Yu.
2) Fix a concurrency issue in bpf_timer where the former could still have
been alive after an application releases or unpins the map, from Hou Tao.
3) Fix a BPF verifier issue where immediates are incorrectly cast to u32
before being spilled and therefore losing sign information, from Hao Sun.
4) Fix a misplaced BPF_TRACE_ITER in check_css_task_iter_allowlist which
incorrectly compared bpf_prog_type with bpf_attach_type, from Chuyi Zhou.
5) Add __bpf_hook_{start,end} as well as __bpf_kfunc_{start,end}_defs macros,
migrate all BPF-related __diag callsites over to it, and add a new
__diag_ignore_all for -Wmissing-declarations to the macros to address
recent build warnings, from Dave Marchevsky.
6) Fix broken BPF selftest build of xdp_hw_metadata test on architectures
where char is not signed, from Björn Töpel.
7) Fix test_maps selftest to properly use LIBBPF_OPTS() macro to initialize
the bpf_map_create_opts, from Andrii Nakryiko.
8) Fix bpffs selftest to avoid unmounting /sys/kernel/debug as it may have
been mounted and used by other applications already, from Manu Bretelle.
9) Fix a build issue without CONFIG_CGROUPS wrt css_task open-coded
iterators, from Matthieu Baerts.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
selftests/bpf: Fix broken build where char is unsigned
selftests/bpf: precision tracking test for BPF_NEG and BPF_END
bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
selftests/bpf: Add test for using css_task iter in sleepable progs
selftests/bpf: Add tests for css_task iter combining with cgroup iter
bpf: Relax allowlist for css_task iter
selftests/bpf: fix test_maps' use of bpf_map_create_opts
bpf: Check map->usercnt after timer->timer is assigned
bpf: Add __bpf_hook_{start,end} macros
bpf: Add __bpf_kfunc_{start,end}_defs macros
selftests/bpf: fix test_bpffs
selftests/bpf: Add test for immediate spilled to stack
bpf: Fix check_stack_write_fixed_off() to correctly spill imm
bpf: fix compilation error without CGROUPS
====================
Link: https://lore.kernel.org/r/20231108132448.1970-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Referenced commit doesn't always set iifidx when offloading the flow to
hardware. Fix the following cases:
- nf_conn_act_ct_ext_fill() is called before extension is created with
nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with
unspecified iifidx when connection is offloaded after only single
original-direction packet has been processed by tc data path. Always fill
the new nf_conn_act_ct_ext instance after creating it in
nf_conn_act_ct_ext_add().
- Offloading of unidirectional UDP NEW connections is now supported, but ct
flow iifidx field is not updated when connection is promoted to
bidirectional which can result reply-direction iifidx to be zero when
refreshing the connection. Fill in the extension and update flow iifidx
before calling flow_offload_refresh().
Fixes: 9795ded7f9 ("net/sched: act_ct: Fill offloading tuple iifidx")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 6a9bad0069 ("net/sched: act_ct: offload UDP NEW connections")
Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- SUNRPC:
- re-probe the target RPC port after an ECONNRESET error
- handle allocation errors from rpcb_call_async()
- fix a use-after-free condition in rpc_pipefs
- fix up various checks for timeouts
- NFSv4.1:
- Handle NFS4ERR_DELAY errors during session trunking
- fix SP4_MACH_CRED protection for pnfs IO
- NFSv4:
- Ensure that we test all delegations when the server notifies
us that it may have revoked some of them
Features:
- Allow knfsd processes to break out of NFS4ERR_DELAY loops when
re-exporting NFSv4.x by setting appropriate values for the
'delay_retrans' module parameter
- nfs: Convert nfs_symlink() to use a folio"
* tag 'nfs-for-6.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Convert nfs_symlink() to use a folio
SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO
SUNRPC: Add an IS_ERR() check back to where it was
NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunking
nfs41: drop dependency between flexfiles layout driver and NFSv3 modules
NFSv4: fairly test all delegations on a SEQ4_ revocation
SUNRPC: SOFTCONN tasks should time out when on the sending list
SUNRPC: Force close the socket when a hard error is reported
SUNRPC: Don't skip timeout checks in call_connect_status()
SUNRPC: ECONNRESET might require a rebind
NFSv4/pnfs: Allow layoutget to return EAGAIN for softerr mounts
NFSv4: Add a parameter to limit the number of retries after NFS4ERR_DELAY
Pull exfat updates from Namjae Jeon:
- Fix an issue that exfat timestamps are not updated caused by new
timestamp accessor function patch
* tag 'exfat-for-6.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix ctime is not updated
exfat: fix setting uninitialized time to ctime/atime
Pull xfs updates from Chandan Babu:
- Realtime device subsystem:
- Cleanup usage of xfs_rtblock_t and xfs_fsblock_t data types
- Replace open coded conversions between rt blocks and rt extents
with calls to static inline helpers
- Replace open coded realtime geometry compuation and macros with
helper functions
- CPU usage optimizations for realtime allocator
- Misc bug fixes associated with Realtime device
- Allow read operations to execute while an FICLONE ioctl is being
serviced
- Misc bug fixes:
- Alert user when xfs_droplink() encounters an inode with a link
count of zero
- Handle the case where the allocator could return zero extents when
servicing an fallocate request
* tag 'xfs-6.7-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (40 commits)
xfs: allow read IO and FICLONE to run concurrently
xfs: handle nimaps=0 from xfs_bmapi_write in xfs_alloc_file_space
xfs: introduce protection for drop nlink
xfs: don't look for end of extent further than necessary in xfs_rtallocate_extent_near()
xfs: don't try redundant allocations in xfs_rtallocate_extent_near()
xfs: limit maxlen based on available space in xfs_rtallocate_extent_near()
xfs: return maximum free size from xfs_rtany_summary()
xfs: invert the realtime summary cache
xfs: simplify rt bitmap/summary block accessor functions
xfs: simplify xfs_rtbuf_get calling conventions
xfs: cache last bitmap block in realtime allocator
xfs: use accessor functions for summary info words
xfs: consolidate realtime allocation arguments
xfs: create helpers for rtsummary block/wordcount computations
xfs: use accessor functions for bitmap words
xfs: create helpers for rtbitmap block/wordcount computations
xfs: create a helper to handle logging parts of rt bitmap/summary blocks
xfs: convert rt summary macros to helpers
xfs: convert open-coded xfs_rtword_t pointer accesses to helper
xfs: remove XFS_BLOCKWSIZE and XFS_BLOCKWMASK macros
...
The mailman-2 system behind lists.linux[-]foundation.org is being
retired, so the lists are being migrated to lists.linux.dev.
Since both domains belong to LF and setting up proper forwards is
possible, the old addresses will continue to work for a while, but all
new patches should be sent to the new canonical addresses for each list.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more s390 updates from Vasily Gorbik:
- Get rid of s390 specific use of two PTEs per 4KB page with complex
half-used pages tracking. Using full 4KB pages for 2KB PTEs increases
the memory footprint of page tables but drastically simplify mm code,
removing a common blocker for common code changes and adaptations
- Simplify and rework "cmma no-dat" handling. This is a follow up for
recent fixes which prevent potential incorrect guest TLB flushes
- Add perf user stack unwinding as well as USER_STACKTRACE support for
user space built with -mbackchain compile option
- Add few missing conversion from tlb_remove_table to tlb_remove_ptdesc
- Fix crypto cards vanishing in a secure execution environment due to
asynchronous errors
- Avoid reporting crypto cards or queues in check-stop state as online
- Fix null-ptr deference in AP bus code triggered by early config
change via SCLP
- Couple of stability improvements in AP queue interrupt handling
* tag 's390-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: make pte_free_tlb() similar to pXd_free_tlb()
s390/mm: use compound page order to distinguish page tables
s390/mm: use full 4KB page for 2KB PTE
s390/cmma: rework no-dat handling
s390/cmma: move arch_set_page_dat() to header file
s390/cmma: move set_page_stable() and friends to header file
s390/cmma: move parsing of cmma kernel parameter to early boot code
s390/cmma: cleanup inline assemblies
s390/ap: fix vanishing crypto cards in SE environment
s390/zcrypt: don't report online if card or queue is in check-stop state
s390: add USER_STACKTRACE support
s390/perf: implement perf_callchain_user()
s390/ap: fix AP bus crash on early config change callback invocation
s390/ap: re-enable interrupt for AP queues
s390/ap: rework to use irq info from ap queue status
s390/mm: add missing conversion to use ptdescs
-EOPNOTSUPP is the return value that implements a "no-op" hook, not 0.
Without this fix having only the BPF LSM enabled (with no programs
attached) can cause uninitialized variable reads in
nfsd4_encode_fattr(), because the BPF hook returns 0 without touching
the 'ctxlen' variable and the corresponding 'contextlen' variable in
nfsd4_encode_fattr() remains uninitialized, yet being treated as valid
based on the 0 return value.
Cc: stable@vger.kernel.org
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
