IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
MALL SS and Subvp use the same calculations for determining the size of
the required allocation for a given surface, which is already done in
DML. Add an interface to extract this information from VBA variables and
use in their respective helper functions. Also refactor existing code to
remove stale workarounds.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML does not explicitly consider support for space in MALL required for
subvp phantom pipes. This adds a check to make sure portion of phantom
surface can fit in MALL.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML incorrectly uses surface width for determining DCC meta size in MALL
allocation calculations. Meta pitch should be used instead.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Two issues existed:
1) Configs that support DRR, but have it disabled will fail subvp+vblank
validation incorrectly. Use subvp+vblank path for this case.
2) Configs that support DRR and have it enabled can use higher voltage level
than required if they also support subvp+vblank. Use lowest supported voltage
level for this case.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This tab was deleted accidentally and triggers a Smatch warning:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:1006 gfx_v8_0_init_microcode()
warn: inconsistent indenting
Add it back.
Fixes: 0aaafb7359d2 ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX8")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Last PR missed name of a struct to match in DMUB
[HOW]
Update the logic in dmub_cmh.h header
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SDMA0_CNTL and MMHUB system aperture related registers are blocked by L1 Policy.
Therefore, they cannot be accessed by VF and loged in violation.
[How]
For MMHUB registers, they will be programmed by PF. So VF will skip to program them in mmhubv3_0.
For SDMA0_CNTL which is a PF_only register, VF don't need to program it in sdma_v6_0.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support RAS fatal error mode1 reset on smu v13_0_0 and v13_0_10.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From smu firmware,the value of power is transferred in units of watts.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2321
Fixes: 137aac26a2ed ("drm/amdgpu/smu12: fix power reporting on renoir")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some dead code was introduced as part of utilizing the `amdgpu_ucode_*`
helpers. Adjust the control flow to make sure that firmware is released
in the appropriate error flows.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1530548 ("Control flow issues")
Fixes: ec787deb2ddf ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX9")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Moving dpcd logic from dc_link_dpcd to link_dpcd as part of link file
restructure
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. Move dd_link_ddc functions to link_ddc.
2. Move link ddc functions declaration exposed in dc to link.h
3. Move link ddc functions declaration exposed in dm to dc_link.h
4. Remove i2caux_interface.h file
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Factor out hpd handling logic from generic dc link file.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
FIFO enable sequence is incomplete as it is currently implemented in FW,
and requires reset to prevent the FIFO to be enabled in an invalid
state. This cannot be done until DIG FE is connected to the BE.
[HOW?]
Add FIFO enable sequence in driver for dcn32 with reset after DIG FE is
connected to BE.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DPIA link encoder (DIG) was not released when a Display XDR 6K
monitor was disconnected. That's because the DPIA link encoder logic
checked the BW when it removed the link encoder for it. And the timing
BW was less than DP link BW. So, it failed to release the link encoder.
And that caused the DIG was occupied and can't be used. The reason it
checked the BW is it wants to identify whether this link was using DIG
or HPO. It skips if it's not DIG.
[How]
Not to check the BW when it removes the link encoder because it's
already in the assignment table, it must be the DIG.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous fix attempted to correct mismatch between DM display
targets and dc panel instancing by only counting connected panels.
This behaviour breaks a feature, thus this is an alternative solution
that allows mapping display targets to dc links during mod_power_create.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1b5d0e7e15430aecbf2bb0ac634a44aec971895c.
It caused corruption in some media players.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
After introducing new DPIA NOTIFICATION we will need
to update the exiting BW allocation logic
[HOW]
Updated the BW alloc source and header files
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit fixes memory leakage in dc_construct_ctx() function.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A logical evaluation already results in bool. There is no need for using
a ternary operator based evaluation and bool conversion of the outcome.
Issue identified using boolconv.cocci Coccinelle semantic patch.
This was also reported by the Kernel Test Robot. Hence
Fixes: 473683a03495 ("drm/amd/display: Create a file dedicated for CRTC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The assignment of the else and if branches is the same, so the if else
here is redundant, so we remove it.
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1951:2-4: WARNING: possible condition with no effect (if == else).
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3719
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On DCN314 when resuming from s0i3 an ASSERT is shown indicating that
`VBIOSSMC_MSG_SetHardMinDcfclkByFreq` returned `VBIOSSMC_Result_Failed`.
This isn't a driver bug; it's a BIOS/configuration bug. To make this
easier to triage, add an explicit warning when this issue happens.
This matches the behavior utilized for failures with
`VBIOSSMC_MSG_TransferTableDram2Smu` configuration.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting scaling does not correctly update CRTC state. As a result
dc stream state's src (composition area) && dest (addressable area)
was not calculated as expected. This causes set scaling doesn's work.
[How]
Correctly update CRTC state when setting scaling property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is possible that adev->dm.dc->caps.max_links is greater than
AMDGPU_MAX_CRTCS. So, to not potentially access unallocated memory use
adev->mode_info.num_crtc to do the bounds check instead of
adev->dm.dc->caps.max_links.
Fixes: 1b11ff764aef ("drm/amd/display: Implement multiple secure display")
Fixes: b8ff7e08bab9 ("drm/amd/display: Fix when disabling secure_display")
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use page aligned size to reserve memory usage because page aligned TTM
BO size is used to unreserve memory usage, otherwise no page aligned
size causes memory usage accounting unbalanced.
Change vram_used definition type to int64_t to be able to trigger
WARN_ONCE(adev && adev->kfd.vram_used < 0, "..."), to help debug the
accounting issue with warning and backtrace.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If acquire_vm failed when initializing KFD vm, set vm->process_info to
NULL and free process info, otherwise, the future acquire_vm will
always fail as vm->process_info is not NULL.
Pass avm as parameter to remove the duplicate code.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The point bo->kfd_bo is NULL for queue's write pointer BO
when creating queue on mGPU. To avoid using the pointer
fixes the error.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfree() & vfree() internally performs NULL check on the pointer handed
to it and take no action if it indeed is NULL. Hence there is no need
for a pre-check of the memory pointer before handing it to
kfree()/vfree().
Issue reported by ifnullfree.cocci Coccinelle semantic patch script.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This leverages the logic in smu11. No need to talk to SMU to
check BACO enablement as it's in BACO state already.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There will be data corruption on vram allocated by svm
if the initialization is not complete and application is
writting on the memory. Adding sync to wait for the
initialization completion is to resolve this issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the resource_size() function instead of a open coded computation
resource size. It makes the code more readable.
Issue identified using resource_size.cocci coccinelle semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No consumers outside of amdgpu_ucode.c use amdgpu_ucode_validate
anymore, so make the function static.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_release` helper is replacing all calls
to release_firmware.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_release` helper is replacing all calls to
release_firmware.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
