IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The new vkms virtual display code is atomic so there is
no need to call drm_helper_disable_unused_functions()
when it is enabled. Doing so can result in a segfault.
When the driver switched from the old virtual display code
to the new atomic virtual display code, it was missed that
we enable virtual display unconditionally under SR-IOV
so the checks here missed that case. Add the missing
check for SR-IOV.
There is no equivalent of this patch for Linus' tree
because the relevant code no longer exists. This patch
is only relevant to kernels 5.15 and 5.16.
Fixes: 84ec374bd580 ("drm/amdgpu: create amdgpu_vkms (v4)")
Cc: stable@vger.kernel.org # 5.15.x
Cc: hgoffin@amazon.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5ba14043621f4afdf3ad5f92ee2d8dbebbe4340 upstream.
When pinning a buffer, we should check to see if there are any
additional restrictions imposed by bo->preferred_domains. This will
prevent the BO from being moved to an invalid domain when pinning.
For example, this can happen if the user requests to create a BO in GTT
domain for display scanout. amdgpu_dm will allow pinning to either VRAM
or GTT domains, since DCN can scanout from either or. However, in
amdgpu_bo_pin_restricted(), pinning to VRAM is preferred if there is
adequate carveout. This can lead to pinning to VRAM despite the user
requesting GTT placement for the BO.
v2: Allow the kernel to override the domain, which can happen when
exporting a BO to a V4L camera (for example).
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca0367ca5d9216644b41f86348d6661f8d9e32d8 upstream.
It looks like that when we moved nouveau over to using drm_dp_aux_init()
and registering it's aux bus during late connector registration, we totally
forgot to fix the failure codepath in nouveau_connector_create() - as it
still seems to assume that drm_dp_aux_init() can fail (it can't).
So, let's fix that and also add a missing check to ensure that we've
properly allocated nv_connector->aux.name while we're at it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: fd43ad9d47e7 ("drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister")
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20220526204313.656473-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c96cfaf8fc02d4bb70727dfa7ce7841a3cff9be2 upstream.
While trying to fix another issue, it occurred to me that I don't actually
think there is any situation where we want pm_runtime_put() in nouveau to
be synchronous. In fact, this kind of just seems like it would cause
issues where we may unexpectedly block a thread we don't expect to be
blocked.
So, let's only use pm_runtime_put_autosuspend().
Changes since v1:
* Use pm_runtime_put_autosuspend(), not pm_runtime_put()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: 3a6536c51d5d ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://patchwork.freedesktop.org/patch/msgid/20220714174234.949259-3-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c441d28945fb113220d48d6c86ebc0b090a2b677 upstream.
This check determines whether a given address is part of
image 0 or image 1. Image 1 starts at offset image0_size,
so that address should be included.
Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511163716.3520591-1-ttabi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 009a3a52791f31c57d755a73f6bc66fbdd8bd76c upstream.
Fix a number of compile errors by including the correct header
files. Examples are shown below.
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_blit_to_vram_rect':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:25:48: error: invalid use of undefined type 'struct drm_framebuffer'
25 | struct hyperv_drm_device *hv = to_hv(fb->dev);
| ^~
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_connector_get_modes':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:59:17: error: implicit declaration of function 'drm_add_modes_noedid' [-Werror=implicit-function-declaration]
59 | count = drm_add_modes_noedid(connector,
| ^~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:62:9: error: implicit declaration of function 'drm_set_preferred_mode'; did you mean 'drm_mm_reserve_node'? [-Werror=implicit-function-declaration]
62 | drm_set_preferred_mode(connector, hv->preferred_width,
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Fixes: 720cf96d8fec ("drm: Drop drm_framebuffer.h from drm_crtc.h")
Fixes: 255490f9150d ("drm: Drop drm_edid.h from drm_crtc.h")
Cc: Deepak Rawat <drawat.floss@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622083413.12573-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db2b927f8668adf3ac765e0921cd2720f5c04172 upstream.
The dmas property is used to hold the dmaengine channel used for audio
output.
Older device trees were missing that property, so if it's not there we
disable the audio output entirely.
However, some overlays have set an empty value to that property, mostly
to workaround the fact that overlays cannot remove a property. Let's add
a test for that case and if it's empty, let's disable it as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Link: https://lore.kernel.org/r/20220613144800.326124-18-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df4aaf015775221dde8a51ee09edb919981f091e upstream.
The vmapping of dma-buf may succeed, but DRM SHMEM rejects the IOMEM
mapping, and thus, drm_gem_shmem_vmap_locked() should unvmap the IOMEM
before erroring out.
Cc: stable@vger.kernel.org
Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200058.1883506-2-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2939deac1fa220bc82b89235f146df1d9b52e876 upstream.
Use ww_acquire_fini() in the error code paths. Otherwise lockdep
thinks that lock is held when lock's memory is freed after the
drm_gem_lock_reservations() error. The ww_acquire_context needs to be
annotated as "released", which fixes the noisy "WARNING: held lock freed!"
splat of VirtIO-GPU driver with CONFIG_DEBUG_MUTEXES=y and enabled lockdep.
Cc: stable@vger.kernel.org
Fixes: 7edc3e3b975b5 ("drm: Add helpers for locking an array of BO reservations.")
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200405.1883897-2-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71af91565052214ad86f288e0d8ffb165f790995 upstream.
The 12/24hr flag in the RX-8035 can be found in the hour register,
instead of the CTRL1 on the RX-8025. This was overlooked when
support for the RX-8035 was added, and was causing read errors when
the hour register 'overflowed'.
To deal with the relevant register not always being visible in
the relevant functions, determine the 12/24 mode at startup and
store it in the driver state.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: f120e2e33ac8 ("rtc: rx8025: implement RX-8035 support")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220706074236.24011-1-matt@traverse.com.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9293ad46d8ba9909187a37b7215324420ad4596 upstream.
Modules always live before the kernel, MODULES_END is fixed but
MODULES_VADDR isn't fixed, it depends on the kernel size.
Let's add it to virtual kernel memory layout dump.
As MODULES is only defined for CONFIG_64BIT, so we dump it when
CONFIG_64BIT=y.
eg,
MODULES_VADDR - MODULES_END
0xffffffff01133000 - 0xffffffff80000000
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220811074150.3020189-5-xianting.tian@linux.alibaba.com
Cc: stable@vger.kernel.org
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b60cf8e59e61133b6c9514ff8d8c8d7049d040ef upstream.
Fix device tree schema validation error messages for the SiFive
Unmatched: ' cache-sets:0:0: 1024 was expected'.
The existing bindings allow for just 1024 cache-sets but the fu740 on
Unmatched the has 2048 cache-sets. The ISA itself permits any arbitrary
power of two, however this is not supported by dt-schema. The RTL for
the IP, to which the number of cache-sets is a tunable parameter, has
been released publicly so speculatively adding a small number of
"reasonable" values seems unwise also.
Instead, as the binding only supports two distinct controllers: add 2048
and explicitly lock it to the fu740's l2 cache while limiting 1024 to
the l2 cache on the fu540.
Fixes: af951c3a113b ("dt-bindings: riscv: Update l2 cache DT documentation to add support for SiFive FU740")
Reported-by: Atul Khare <atulkhare@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220803185359.942928-1-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3dbe5829408bc1586f75b4667ef60e5aab0209c7 upstream.
In riscv the process of uprobe going to clear spie before exec
the origin insn,and set spie after that.But When access the page
which origin insn has been placed a page fault may happen and
irq was disabled in arch_uprobe_pre_xol function,It cause a WARN
as follows.
There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol.
We can just remove it.
[ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488
[ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work
[ 31.684929] preempt_count: 0, expected: 0
[ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G
[ 31.686542] Hardware name: riscv-virtio,qemu (DT)
[ 31.686797] Call Trace:
[ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38
[ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c
[ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c
[ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20
[ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122
[ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a
[ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130
[ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446
[ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220721065820.245755-1-zouyipeng@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6431e92fc827bdd2d28f79150d90415ba9ce0d21 upstream.
For all syscalls in 32-bit compat mode on 64-bit kernels the upper
32-bits of the 64-bit registers are zeroed out, so a negative 32-bit
signed value will show up as positive 64-bit signed value.
This behaviour breaks the io_pgetevents_time64() syscall which expects
signed 64-bit values for the "min_nr" and "nr" parameters.
Fix this by switching to the compat_sys_io_pgetevents_time64() syscall,
which uses "compat_long_t" types for those parameters.
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf59f34d7f978d14d6520fd80a78a5ad5cb8abf8 upstream.
The function ioremap() in lba_driver_probe() can fail, so
its return value should be checked.
Fixes: 4bdc0d676a643 ("remove ioremap_nocache and devm_ioremap_nocache")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cab56b51ec0e69128909cef4650e1907248d821b upstream.
Fix the output of /proc/iomem to show the real hardware device name
including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]".
Up to now only the pa_pathname ("[8:16.0]") was shown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd524b7f317de8d31d638cbfdc7be4cf9b770e42 upstream.
Some code paths cannot guarantee the inode have any dentry alias. So
WARN_ON() all !dentry may flood the kernel logs.
For example, when an overlayfs inode is watched by inotifywait (1), and
someone is trying to read the /proc/$(pidof inotifywait)/fdinfo/INOTIFY_FD,
at that time if the dentry has been reclaimed by kernel (such as
echo 2 > /proc/sys/vm/drop_caches), there will be a WARN_ON(). The
printed call stack would be like:
? show_mark_fhandle+0xf0/0xf0
show_mark_fhandle+0x4a/0xf0
? show_mark_fhandle+0xf0/0xf0
? seq_vprintf+0x30/0x50
? seq_printf+0x53/0x70
? show_mark_fhandle+0xf0/0xf0
inotify_fdinfo+0x70/0x90
show_fdinfo.isra.4+0x53/0x70
seq_show+0x130/0x170
seq_read+0x153/0x440
vfs_read+0x94/0x150
ksys_read+0x5f/0xe0
do_syscall_64+0x59/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
So let's drop WARN_ON() to avoid kernel log flooding.
Reported-by: Hongbo Yin <yinhongbo@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Tianci Zhang <zhangtianci.1997@bytedance.com>
Fixes: 8ed5eec9d6c4 ("ovl: encode pure upper file handles")
Cc: <stable@vger.kernel.org> # v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13dc15a3f5fd7f884e4bfa8c011a0ae868df12ae upstream.
For some sev ioctl interfaces, input may be passed that is less than or
equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP
firmware returns. In this case, kmalloc will allocate memory that is the
size of the input rather than the size of the data. Since PSP firmware
doesn't fully overwrite the buffer, the sev ioctl interfaces with the
issue may return uninitialized slab memory.
Currently, all of the ioctl interfaces in the ccp driver are safe, but
to prevent future problems, change all ioctl interfaces that allocate
memory with kmalloc to use kzalloc and memset the data buffer to zero
in sev_ioctl_do_platform_status.
Fixes: 38103671aad3 ("crypto: ccp: Use the stack and common buffer for status commands")
Fixes: e799035609e15 ("crypto: ccp: Implement SEV_PEK_CSR ioctl command")
Fixes: 76a2b524a4b1d ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Fixes: d6112ea0cb344 ("crypto: ccp - introduce SEV_GET_ID2 command")
Cc: stable@vger.kernel.org
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: John Allen <john.allen@amd.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3497fd009ef2c59eea60d21c3ac22de3585ed7d upstream.
Unlike other copying operations on ITER_PIPE, copy_mc_to_iter() can
result in a short copy. In that case we need to trim the unused
buffers, as well as the length of partially filled one - it's not
enough to set ->head, ->iov_offset and ->count to reflect how
much had we copied. Not hard to fix, fortunately...
I'd put a helper (pipe_discard_from(pipe, head)) into pipe_fs_i.h,
rather than iov_iter.c - it has nothing to do with iov_iter and
having it will allow us to avoid an ugly kludge in fs/splice.c.
We could put it into lib/iov_iter.c for now and move it later,
but I don't see the point going that way...
Cc: stable@kernel.org # 4.19+
Fixes: ca146f6f091e "lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()"
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a69e617e533edddf3fa3123149900f36e0a6dc74 upstream.
usbnet uses the work usbnet_deferred_kevent() to perform tasks which may
sleep. On disconnect, completion of the work was originally awaited in
->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic
commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock":
https://git.kernel.org/tglx/history/c/0f138bbfd83c
The change was made because back then, the kernel's workqueue
implementation did not allow waiting for a single work. One had to wait
for completion of *all* work by calling flush_scheduled_work(), and that
could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex
held in ->ndo_stop().
The commit solved one problem but created another: It causes a
use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c,
ax88179_178a.c, ch9200.c and smsc75xx.c:
* If the drivers receive a link change interrupt immediately before
disconnect, they raise EVENT_LINK_RESET in their (non-sleepable)
->status() callback and schedule usbnet_deferred_kevent().
* usbnet_deferred_kevent() invokes the driver's ->link_reset() callback,
which calls netif_carrier_{on,off}().
* That in turn schedules the work linkwatch_event().
Because usbnet_deferred_kevent() is awaited after unregister_netdev(),
netif_carrier_{on,off}() may operate on an unregistered netdev and
linkwatch_event() may run after free_netdev(), causing a use-after-free.
In 2010, usbnet was changed to only wait for a single instance of
usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf
("drivers/net: don't use flush_scheduled_work()").
Unfortunately the commit neglected to move the wait back to
->ndo_stop(). Rectify that omission at long last.
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/netdev/CAG48ez0MHBbENX5gCdHAUXZ7h7s20LnepBF-pa5M=7Bi-jZrEA@mail.gmail.com/
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/netdev/20220315113841.GA22337@pengutronix.de/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/d1c87ebe9fc502bffcd1576e238d685ad08321e4.1655987888.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3866cba87dcd0162fb41e9b3b653d0af68fad5ec upstream.
There is no need to directly skip over to the SCROLL_REDRAW case while
the logo is still shown.
When using DRM, this change has no effect because the code will reach
the SCROLL_REDRAW case immediately anyway.
But if you run an accelerated fbdev driver and have
FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is
slowed down by factors so that it feels as if you use a 9600 baud
terminal.
So, drop those unnecessary checks and speed up fbdev console
acceleration during bootup.
Cc: stable@vger.kernel.org # v5.10+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYxk7wsBPx3po+@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cad564ca557f8d3bb3b1fa965d9a2b3f6490ec69 upstream.
The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take
over the given range (n1...n2) of consoles. The value for n1 and n2
needs to be a positive number and up to (MAX_NR_CONSOLES - 1).
The given values were not fully checked against those boundaries yet.
To fix the issue, convert first_fb_vc and last_fb_vc to unsigned
integers and check them against the upper boundary, and make sure that
first_fb_vc is smaller than last_fb_vc.
Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5a8aa5d7d80d21ab6b266f1bed4194b61746199 upstream.
If cooling_device_stats_setup() fails to create the stats object, it
must clear the last slot in cooling_device_attr_groups that was
initially empty (so as to make it possible to add stats attributes to
the cooling device attribute groups).
Failing to do so may cause the stats attributes to be created by
mistake for a device that doesn't have a stats object, because the
slot in question might be populated previously during the registration
of another cooling device.
Fixes: 8ea229511e06 ("thermal: Add cooling device's statistics in sysfs")
Reported-by: Di Shen <di.shen@unisoc.com>
Tested-by: Di Shen <di.shen@unisoc.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac6800e279a22b28f4fc21439843025a0d5bf03e upstream.
All creation paths except for O_TMPFILE handle umask in the vfs directly
if the filesystem doesn't support or enable POSIX ACLs. If the filesystem
does then umask handling is deferred until posix_acl_create().
Because, O_TMPFILE misses umask handling in the vfs it will not honor
umask settings. Fix this by adding the missing umask handling.
Link: https://lore.kernel.org/r/1657779088-2242-2-git-send-email-xuyang2018.jy@fujitsu.com
Fixes: 60545d0d4610 ("[O_TMPFILE] it's still short a few helpers, but infrastructure should be OK now...")
Cc: <stable@vger.kernel.org> # 4.19+
Reported-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2ebff9c57fe4eb104ce4768f6ebcccf76bef849 upstream.
If something manages to set the maximum file size to MAX_OFFSET+1, this
can cause the xfs and ext4 filesystems at least to become corrupt.
Ordinarily, the kernel protects against userspace trying this by
checking the value early in the truncate() and ftruncate() system calls
calls - but there are at least two places that this check is bypassed:
(1) Cachefiles will round up the EOF of the backing file to DIO block
size so as to allow DIO on the final block - but this might push
the offset negative. It then calls notify_change(), but this
inadvertently bypasses the checking. This can be triggered if
someone puts an 8EiB-1 file on a server for someone else to try and
access by, say, nfs.
(2) ksmbd doesn't check the value it is given in set_end_of_file_info()
and then calls vfs_truncate() directly - which also bypasses the
check.
In both cases, it is potentially possible for a network filesystem to
cause a disk filesystem to be corrupted: cachefiles in the client's
cache filesystem; ksmbd in the server's filesystem.
nfsd is okay as it checks the value, but we can then remove this check
too.
Fix this by adding a check to inode_newsize_ok(), as called from
setattr_prepare(), thereby catching the issue as filesystems set up to
perform the truncate with minimal opportunity for bypassing the new
check.
Fixes: 1f08c925e7a3 ("cachefiles: Implement backing file wrangling")
Fixes: f44158485826 ("cifsd: add file operations")
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@kernel.org
Acked-by: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Steve French <sfrench@samba.org>
cc: Hyunchul Lee <hyc.lee@gmail.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30267718fe2d4dbea49015b022f6f1fe16ca31ab upstream.
Board ID 8786 seems to be another variant of the Omen 15 that needs
ALC285_FIXUP_HP_MUTE_LED for working mute LED.
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220809142455.6473-1-bedant.patnaik@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f882c4bef9cb914d9f7be171afb10ed26536bfa7 upstream.
There is another Asus K42JZ model with the PCI SSID 1043:1313
that requires the quirk ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220805074534.20003-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74bba640d69914cf832b87f6bbb700e5ba430672 upstream.
The 12,1 model requires the same configuration as the 12,2 model
to enable headphones but has a different codec SSID. Adds
12,1 SSID for matching quirk.
[ re-sorted in SSID order by tiwai ]
Signed-off-by: Allen Ballway <ballway@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220810152701.1.I902c2e591bbf8de9acb649d1322fa1f291849266@changeid
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f83bb2592482fe94c6eea07a8121763c80f36ce5 upstream.
There is another LENOVO 20149 (Type1Sku0) Notebook model with
CX20590, the device PCI SSID is 17aa:3977, which headphones are
not responding, that requires the quirk CXT_PINCFG_LENOVO_NOTEBOOK.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220808073406.19460-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2928e224d85e7cc139009ab17cefdfec2df5d11 upstream.
Set pm_power_off to NULL like on all other architectures, check if it
is set in machine_halt() and machine_power_off() and fallback to
default_power_off if no other power driver got registered.
This brings riscv architecture inline with all other architectures,
and allows to reuse exiting power drivers unmodified.
Kernels without legacy SBI v0.1 extensions (CONFIG_RISCV_SBI_V01 is
not set), do not set pm_power_off to sbi_shutdown(). There is no
support for SBI v0.3 system reset extension either. This prevents
using gpio_poweroff on SiFive HiFive Unmatched.
Tested on SiFive HiFive unmatched, with a dtb specifying gpio-poweroff
node and kernel complied without CONFIG_RISCV_SBI_V01.
BugLink: https://bugs.launchpad.net/bugs/1942806
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 901d3765fa804ce42812f1d5b1f3de2dfbb26723 upstream.
Commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time
/ preempted status", 2021-11-11) open coded the previous call to
kvm_map_gfn, but in doing so it dropped the comparison between the cached
guest physical address and the one in the MSR. This cause an incorrect
cache hit if the guest modifies the steal time address while the memslots
remain the same. This can happen with kexec, in which case the steal
time data is written at the address used by the old kernel instead of
the old one.
While at it, rename the variable from gfn to gpa since it is a plain
physical address and not a right-shifted one.
Reported-by: Dave Young <ruyang@redhat.com>
Reported-by: Xiaoying Yan <yiyan@redhat.com>
Analyzed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Fixes: 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3c28d24d910a746b02f496d190e0e8c6560224b upstream.
Commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time
/ preempted status", 2021-11-11) open coded the previous call to
kvm_map_gfn, but in doing so it dropped the comparison between the cached
guest physical address and the one in the MSR. This cause an incorrect
cache hit if the guest modifies the steal time address while the memslots
remain the same. This can happen with kexec, in which case the preempted
bit is written at the address used by the old kernel instead of
the old one.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Fixes: 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 982bae43f11c37b51d2f1961bb25ef7cac3746fa upstream.
Mark kvm_mmu_x86_module_init() with __init, the entire reason it exists
is to initialize variables when kvm.ko is loaded, i.e. it must never be
called after module initialization.
Fixes: 1d0e84806047 ("KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded")
Cc: stable@vger.kernel.org
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220803224957.1285926-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 156b9d76e8822f2956c15029acf2d4b171502f3a upstream.
Windows 10/11 guests with Hyper-V role (WSL2) enabled are observed to
hang upon boot or shortly after when a non-default TSC frequency was
set for L1. The issue is observed on a host where TSC scaling is
supported. The problem appears to be that Windows doesn't use TSC
scaling for its guests, even when the feature is advertised, and KVM
filters SECONDARY_EXEC_TSC_SCALING out when creating L2 controls from
L1's VMCS. This leads to L2 running with the default frequency (matching
host's) while L1 is running with an altered one.
Keep SECONDARY_EXEC_TSC_SCALING in secondary exec controls for L2 when
it was set for L1. TSC_MULTIPLIER is already correctly computed and
written by prepare_vmcs02().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: d041b5ea93352b ("KVM: nVMX: Enable nested TSC scaling")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220712135009.952805-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2626206963ace9e8bf92b6eea5ff78dd674c555c upstream.
When injecting a #GP on LLDT/LTR due to a non-canonical LDT/TSS base, set
the error code to the selector. Intel SDM's says nothing about the #GP,
but AMD's APM explicitly states that both LLDT and LTR set the error code
to the selector, not zero.
Note, a non-canonical memory operand on LLDT/LTR does generate a #GP(0),
but the KVM code in question is specific to the base from the descriptor.
Fixes: e37a75a13cda ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220711232750.1092012-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec6e4d863258d4bfb36d48d5e3ef68140234d688 upstream.
Wait to mark the TSS as busy during LTR emulation until after all fault
checks for the LTR have passed. Specifically, don't mark the TSS busy if
the new TSS base is non-canonical.
Opportunistically drop the one-off !seg_desc.PRESENT check for TR as the
only reason for the early check was to avoid marking a !PRESENT TSS as
busy, i.e. the common !PRESENT is now done before setting the busy bit.
Fixes: e37a75a13cda ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR")
Reported-by: syzbot+760a73552f47a8cd0fd9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Hou Wenlong <houwenlong.hwl@antgroup.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220711232750.1092012-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7d855c2aff2d511fd60ee2e356134c4fb394799 upstream.
Inject a #UD if L1 attempts VMXON with a CR0 or CR4 that is disallowed
per the associated nested VMX MSRs' fixed0/1 settings. KVM cannot rely
on hardware to perform the checks, even for the few checks that have
higher priority than VM-Exit, as (a) KVM may have forced CR0/CR4 bits in
hardware while running the guest, (b) there may incompatible CR0/CR4 bits
that have lower priority than VM-Exit, e.g. CR0.NE, and (c) userspace may
have further restricted the allowed CR0/CR4 values by manipulating the
guest's nested VMX MSRs.
Note, despite a very strong desire to throw shade at Jim, commit
70f3aac964ae ("kvm: nVMX: Remove superfluous VMX instruction fault checks")
is not to blame for the buggy behavior (though the comment...). That
commit only removed the CR0.PE, EFLAGS.VM, and COMPATIBILITY mode checks
(though it did erroneously drop the CPL check, but that has already been
remedied). KVM may force CR0.PE=1, but will do so only when also
forcing EFLAGS.VM=1 to emulate Real Mode, i.e. hardware will still #UD.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216033
Fixes: ec378aeef9df ("KVM: nVMX: Implement VMXON and VMXOFF")
Reported-by: Eric Li <ercli@ucdavis.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca58f3aa53d165afe4ab74c755bc2f6d168617ac upstream.
Check that the guest (L2) and host (L1) CR4 values that would be loaded
by nested VM-Enter and VM-Exit respectively are valid with respect to
KVM's (L0 host) allowed CR4 bits. Failure to check KVM reserved bits
would allow L1 to load an illegal CR4 (or trigger hardware VM-Fail or
failed VM-Entry) by massaging guest CPUID to allow features that are not
supported by KVM. Amusingly, KVM itself is an accomplice in its doom, as
KVM adjusts L1's MSR_IA32_VMX_CR4_FIXED1 to allow L1 to enable bits for
L2 based on L1's CPUID model.
Note, although nested_{guest,host}_cr4_valid() are _currently_ used if
and only if the vCPU is post-VMXON (nested.vmxon == true), that may not
be true in the future, e.g. emulating VMXON has a bug where it doesn't
check the allowed/required CR0/CR4 bits.
Cc: stable@vger.kernel.org
Fixes: 3899152ccbf4 ("KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8ae08f9789ad59d318ea75b570caa454aceda81 upstream.
Restrict the nVMX MSRs based on KVM's config, not based on the guest's
current config. Using the guest's config to audit the new config
prevents userspace from restoring the original config (KVM's config) if
at any point in the past the guest's config was restricted in any way.
Fixes: 62cc6b9dc61e ("KVM: nVMX: support restore of VMX capability MSRs")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c33f6f2228fe8517e38941a508e9f905f99ecba9 upstream.
Split the common x86 parts of kvm_is_valid_cr4(), i.e. the reserved bits
checks, into a separate helper, __kvm_is_valid_cr4(), and export only the
inner helper to vendor code in order to prevent nested VMX from calling
back into vmx_is_valid_cr4() via kvm_is_valid_cr4().
On SVM, this is a nop as SVM doesn't place any additional restrictions on
CR4.
On VMX, this is also currently a nop, but only because nested VMX is
missing checks on reserved CR4 bits for nested VM-Enter. That bug will
be fixed in a future patch, and could simply use kvm_is_valid_cr4() as-is,
but nVMX has _another_ bug where VMXON emulation doesn't enforce VMX's
restrictions on CR0/CR4. The cleanest and most intuitive way to fix the
VMXON bug is to use nested_host_cr{0,4}_valid(). If the CR4 variant
routes through kvm_is_valid_cr4(), using nested_host_cr4_valid() won't do
the right thing for the VMXON case as vmx_is_valid_cr4() enforces VMX's
restrictions if and only if the vCPU is post-VMXON.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3f0e5fd2d33d80c5a5a8b5e5d2bab2841709cc8 upstream.
When the SIGP interpretation facility is present and a VCPU sends an
ecall to another VCPU in enabled wait, the sending VCPU receives a 56
intercept (partial execution), so KVM can wake up the receiving CPU.
Note that the SIGP interpretation facility will take care of the
interrupt delivery and KVM's only job is to wake the receiving VCPU.
For PV, the sending VCPU will receive a 108 intercept (pv notify) and
should continue like in the non-PV case, i.e. wake the receiving VCPU.
For PV and non-PV guests the interrupt delivery will occur through the
SIGP interpretation facility on SIE entry when SIE finds the X bit in
the status field set.
However, in handle_pv_notification(), there was no special handling for
SIGP, which leads to interrupt injection being requested by KVM for the
next SIE entry. This results in the interrupt being delivered twice:
once by the SIGP interpretation facility and once by KVM through the
IICTL.
Add the necessary special handling in handle_pv_notification(), similar
to handle_partial_execution(), which simply wakes the receiving VCPU and
leave interrupt delivery to the SIGP interpretation facility.
In contrast to external calls, emergency calls are not interpreted but
also cause a 108 intercept, which is why we still need to call
handle_instruction() for SIGP orders other than ecall.
Since kvm_s390_handle_sigp_pei() is now called for all SIGP orders which
cause a 108 intercept - even if they are actually handled by
handle_instruction() - move the tracepoint in kvm_s390_handle_sigp_pei()
to avoid possibly confusing trace messages.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 5.7
Fixes: da24a0cc58ed ("KVM: s390: protvirt: Instruction emulation")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220718130434.73302-1-nrb@linux.ibm.com
Message-Id: <20220718130434.73302-1-nrb@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 764643a6be07445308e492a528197044c801b3ba upstream.
If a nested run isn't pending, snapshot vmcs01.GUEST_IA32_DEBUGCTL
irrespective of whether or not VM_ENTRY_LOAD_DEBUG_CONTROLS is set in
vmcs12. When restoring nested state, e.g. after migration, without a
nested run pending, prepare_vmcs02() will propagate
nested.vmcs01_debugctl to vmcs02, i.e. will load garbage/zeros into
vmcs02.GUEST_IA32_DEBUGCTL.
If userspace restores nested state before MSRs, then loading garbage is a
non-issue as loading DEBUGCTL will also update vmcs02. But if usersepace
restores MSRs first, then KVM is responsible for propagating L2's value,
which is actually thrown into vmcs01, into vmcs02.
Restoring L2 MSRs into vmcs01, i.e. loading all MSRs before nested state
is all kinds of bizarre and ideally would not be supported. Sadly, some
VMMs do exactly that and rely on KVM to make things work.
Note, there's still a lurking SMM bug, as propagating vmcs01's DEBUGCTL
to vmcs02 across RSM may corrupt L2's DEBUGCTL. But KVM's entire VMX+SMM
emulation is flawed as SMI+RSM should not toouch _any_ VMCS when use the
"default treatment of SMIs", i.e. when not using an SMI Transfer Monitor.
Link: https://lore.kernel.org/all/Yobt1XwOfb5M6Dfa@google.com
Fixes: 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220614215831.3762138-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa578398a0ba2c079fa1170da21fa5baae0cedb2 upstream.
If a nested run isn't pending, snapshot vmcs01.GUEST_BNDCFGS irrespective
of whether or not VM_ENTRY_LOAD_BNDCFGS is set in vmcs12. When restoring
nested state, e.g. after migration, without a nested run pending,
prepare_vmcs02() will propagate nested.vmcs01_guest_bndcfgs to vmcs02,
i.e. will load garbage/zeros into vmcs02.GUEST_BNDCFGS.
If userspace restores nested state before MSRs, then loading garbage is a
non-issue as loading BNDCFGS will also update vmcs02. But if usersepace
restores MSRs first, then KVM is responsible for propagating L2's value,
which is actually thrown into vmcs01, into vmcs02.
Restoring L2 MSRs into vmcs01, i.e. loading all MSRs before nested state
is all kinds of bizarre and ideally would not be supported. Sadly, some
VMMs do exactly that and rely on KVM to make things work.
Note, there's still a lurking SMM bug, as propagating vmcs01.GUEST_BNDFGS
to vmcs02 across RSM may corrupt L2's BNDCFGS. But KVM's entire VMX+SMM
emulation is flawed as SMI+RSM should not toouch _any_ VMCS when use the
"default treatment of SMIs", i.e. when not using an SMI Transfer Monitor.
Link: https://lore.kernel.org/all/Yobt1XwOfb5M6Dfa@google.com
Fixes: 62cf9bd8118c ("KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS")
Cc: stable@vger.kernel.org
Cc: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220614215831.3762138-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
