IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Drop the @offset and @multiplier params from the kvm_x86_ops hooks for
propagating TSC offsets/multipliers into hardware, and instead have the
vendor implementations pull the information directly from the vCPU
structure. The respective vCPU fields _must_ be written at the same
time in order to maintain consistent state, i.e. it's not random luck
that the value passed in by all callers is grabbed from the vCPU.
Explicitly grabbing the value from the vCPU field in SVM's implementation
in particular will allow for additional cleanup without introducing even
more subtle dependencies. Specifically, SVM can skip the WRMSR if guest
state isn't loaded, i.e. svm_prepare_switch_to_guest() will load the
correct value for the vCPU prior to entering the guest.
This also reconciles KVM's handling of related values that are stored in
the vCPU, as svm_write_tsc_offset() already assumes/requires the caller
to have updated l1_tsc_offset.
Link: https://lore.kernel.org/r/20230729011608.1065019-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly disable preemption when writing MSR_AMD64_TSC_RATIO only in the
"outer" helper, as all direct callers of the "inner" helper now run with
preemption already disabled. And that isn't a coincidence, as the outer
helper requires a vCPU and is intended to be used when modifying guest
state and/or emulating guest instructions, which are typically done with
preemption enabled.
Direct use of the inner helper should be extremely limited, as the only
time KVM should modify MSR_AMD64_TSC_RATIO without a vCPU is when
sanitizing the MSR for a specific pCPU (currently done when {en,dis}abling
disabling SVM). The other direct caller is svm_prepare_switch_to_guest(),
which does have a vCPU, but is a one-off special case: KVM is about to
enter the guest on a specific pCPU and thus must have preemption disabled.
Link: https://lore.kernel.org/r/20230729011608.1065019-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating nested SVM transitions, use the outer helper for writing
the TSC multiplier for L2. Using the inner helper only for one-off cases,
i.e. for paths where KVM is NOT emulating or modifying vCPU state, will
allow for multiple cleanups:
- Explicitly disabling preemption only in the outer helper
- Getting the multiplier from the vCPU field in the outer helper
- Skipping the WRMSR in the outer helper if guest state isn't loaded
Opportunistically delete an extra newline.
No functional change intended.
Link: https://lore.kernel.org/r/20230729011608.1065019-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating nested VM-Exit, load L1's TSC multiplier if L1's desired
ratio doesn't match the current ratio, not if the ratio L1 is using for
L2 diverges from the default. Functionally, the end result is the same
as KVM will run L2 with L1's multiplier if L2's multiplier is the default,
i.e. checking that L1's multiplier is loaded is equivalent to checking if
L2 has a non-default multiplier.
However, the assertion that TSC scaling is exposed to L1 is flawed, as
userspace can trigger the WARN at will by writing the MSR and then
updating guest CPUID to hide the feature (modifying guest CPUID is
allowed anytime before KVM_RUN). E.g. hacking KVM's state_test
selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105
nested_svm_vmexit+0x6af/0x720 [kvm_amd]
Call Trace:
nested_svm_exit_handled+0x102/0x1f0 [kvm_amd]
svm_handle_exit+0xb9/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
? trace_hardirqs_off+0x4d/0xa0
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Unlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled check
into the if-statement is wrong as KVM needs to ensure L1's multiplier is
loaded in the above scenario. Alternatively, the WARN_ON() could simply
be deleted, but that would make KVM's behavior even more subtle, e.g. it's
not immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO when
checking only tsc_ratio_msr.
Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check for nested TSC scaling support on nested SVM VMRUN instead of
asserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIO
has diverged from KVM's default. Userspace can trigger the WARN at will
by writing the MSR and then updating guest CPUID to hide the feature
(modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking
KVM's state_test selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699
nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd]
Call Trace:
<TASK>
enter_svm_guest_mode+0x114/0x560 [kvm_amd]
nested_svm_vmrun+0x260/0x330 [kvm_amd]
vmrun_interception+0x29/0x30 [kvm_amd]
svm_invoke_exit_handler+0x35/0x100 [kvm_amd]
svm_handle_exit+0xe7/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x45ca1b
Note, the nested #VMEXIT path has the same flaw, but needs a different
fix and will be handled separately.
Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Latest Intel platform GraniteRapids-D introduces AMX-COMPLEX, which adds
two instructions to perform matrix multiplication of two tiles containing
complex elements and accumulate the results into a packed single precision
tile.
AMX-COMPLEX is enumerated via CPUID.(EAX=7,ECX=1):EDX[bit 8]
Advertise AMX_COMPLEX if it's supported in hardware. There are no VMX
controls for the feature, i.e. the instructions can't be interecepted, and
KVM advertises base AMX in CPUID if AMX is supported in hardware, even if
KVM doesn't advertise AMX as being supported in XCR0, e.g. because the
process didn't opt-in to allocating tile data.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20230802022954.193843-1-tao1.su@linux.intel.com
[sean: tweak last paragraph of changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Bail from vmx_emergency_disable() without processing the list of loaded
VMCSes if CR4.VMXE=0, i.e. if the CPU can't be post-VMXON. It should be
impossible for the list to have entries if VMX is already disabled, and
even if that invariant doesn't hold, VMCLEAR will #UD anyways, i.e.
processing the list is pointless even if it somehow isn't empty.
Assuming no existing KVM bugs, this should be a glorified nop. The
primary motivation for the change is to avoid having code that looks like
it does VMCLEAR, but then skips VMXON, which is nonsensical.
Suggested-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_rebooting is guaranteed to be true prior to disabling SVM
in an emergency, use the existing stgi() helper instead of open coding
STGI. In effect, eat faults on STGI if and only if kvm_rebooting==true.
Link: https://lore.kernel.org/r/20230721201859.2307736-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set kvm_rebooting when virtualization is disabled in an emergency so that
KVM eats faults on virtualization instructions even if kvm_reboot() isn't
reached.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move cpu_svm_disable() into KVM proper now that all hardware
virtualization management is routed through KVM. Remove the now-empty
virtext.h.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable migration when probing VMX support during module load to ensure
the CPU is stable, mostly to match similar SVM logic, where allowing
migration effective requires deliberately writing buggy code. As a bonus,
KVM won't report the wrong CPU to userspace if VMX is unsupported, but in
practice that is a very, very minor bonus as the only way that reporting
the wrong CPU would actually matter is if hardware is broken or if the
system is misconfigured, i.e. if KVM gets migrated from a CPU that _does_
support VMX to a CPU that does _not_ support VMX.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check "this" CPU instead of the boot CPU when querying SVM support so that
the per-CPU checks done during hardware enabling actually function as
intended, i.e. will detect issues where SVM isn't support on all CPUs.
Disable migration for the use from svm_init() mostly so that the standard
accessors for the per-CPU data can be used without getting yelled at by
CONFIG_DEBUG_PREEMPT=y sanity checks. Preventing the "disabled by BIOS"
error message from reporting the wrong CPU is largely a bonus, as ensuring
a stable CPU during module load is a non-goal for KVM.
Link: https://lore.kernel.org/all/ZAdxNgv0M6P63odE@google.com
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fold the guts of cpu_has_svm() into kvm_is_svm_supported(), its sole
remaining user.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the explicit check on the extended CPUID level in cpu_has_svm(), the
kernel's cached CPUID info will leave the entire SVM leaf unset if said
leaf is not supported by hardware. Prior to using cached information,
the check was needed to avoid false positives due to Intel's rather crazy
CPUID behavior of returning the values of the maximum supported leaf if
the specified leaf is unsupported.
Fixes: 682a8108872f ("x86/kvm/svm: Simplify cpu_has_svm()")
Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make building KVM SVM support depend on support for AMD or Hygon. KVM
already effectively restricts SVM support to AMD and Hygon by virtue of
the vendor string checks in cpu_has_svm(), and KVM VMX supports depends
on one of its three known vendors (Intel, Centaur, or Zhaoxin).
Add the CPU_SUP_HYGON clause even though CPU_SUP_HYGON selects CPU_SUP_AMD
to document that KVM SVM support isn't just for AMD CPUs, and to prevent
breakage should Hygon support ever become a standalone thing.
Link: https://lore.kernel.org/r/20230721201859.2307736-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that VMX is disabled in emergencies via the virt callbacks, move the
VMXOFF helpers into KVM, the only remaining user.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fold the raw CPUID check for VMX into kvm_is_vmx_supported(), its sole
user. Keep the check even though KVM also checks X86_FEATURE_VMX, as the
intent is to provide a unique error message if VMX is unsupported by
hardware, whereas X86_FEATURE_VMX may be clear due to firmware and/or
kernel actions.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Expose the crash/reboot hooks used by KVM to disable virtualization in
hardware and unblock INIT only if there's a potential in-tree user,
i.e. either KVM_INTEL or KVM_AMD is enabled.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Attempt to disable virtualization during an emergency reboot if and only
if there is a registered virt callback, i.e. iff a hypervisor (KVM) is
active. If there's no active hypervisor, then the CPU can't be operating
with VMX or SVM enabled (barring an egregious bug).
Checking for a valid callback instead of simply for SVM or VMX support
can also eliminates spurious NMIs by avoiding the unecessary call to
nmi_shootdown_cpus_on_restart().
Note, IRQs are disabled, which prevents KVM from coming along and
enabling virtualization after the fact.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the various "disable virtualization" helpers above the emergency
reboot path so that emergency_reboot_disable_virtualization() can be
stubbed out in a future patch if neither KVM_INTEL nor KVM_AMD is enabled,
i.e. if there is no in-tree user of CPU virtualization.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert that IRQs are disabled when turning off virtualization in an
emergency. KVM enables hardware via on_each_cpu(), i.e. could re-enable
hardware if a pending IPI were delivered after disabling virtualization.
Remove a misleading comment from emergency_reboot_disable_virtualization()
about "just" needing to guarantee the CPU is stable (see above).
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the virt callback to disable SVM (and set GIF=1) during an emergency
instead of blindly attempting to disable SVM. Like the VMX case, if a
hypervisor, i.e. KVM, isn't loaded/active, SVM can't be in use.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use KVM VMX's reboot/crash callback to do VMXOFF in an emergency instead
of manually and blindly doing VMXOFF. There's no need to attempt VMXOFF
if a hypervisor, i.e. KVM, isn't loaded/active, i.e. if the CPU can't
possibly be post-VMXON.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Provide dedicated helpers to (un)register virt hooks used during an
emergency crash/reboot, and WARN if there is an attempt to overwrite
the registered callback, or an attempt to do an unpaired unregister.
Opportunsitically use rcu_assign_pointer() instead of RCU_INIT_POINTER(),
mainly so that the set/unset paths are more symmetrical, but also because
any performance gains from using RCU_INIT_POINTER() are meaningless for
this code.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
VMCLEAR active VMCSes before any emergency reboot, not just if the kernel
may kexec into a new kernel after a crash. Per Intel's SDM, the VMX
architecture doesn't require the CPU to flush the VMCS cache on INIT. If
an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically
be kept and only be written back to memory after the new kernel is booted,
i.e. could effectively corrupt memory after reboot.
Opportunistically remove the setting of the global pointer to NULL to make
checkpatch happy.
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Retry the optimized APIC map recalculation if an APIC-enabled vCPU shows
up between allocating the map and filling in the map data. Conditionally
reschedule before retrying even though the number of vCPUs that can be
created is bounded by KVM. Retrying a few thousand times isn't so slow
as to be hugely problematic, but it's not blazing fast either.
Reset xapic_id_mistach on each retry as a vCPU could change its xAPIC ID
between loops, but do NOT reset max_id. The map size also factors in
whether or not a vCPU's local APIC is hardware-enabled, i.e. userspace
and/or the guest can theoretically keep KVM retrying indefinitely. The
only downside is that KVM will allocate more memory than is strictly
necessary if the vCPU with the highest x2APIC ID disabled its APIC while
the recalculation was in-progress.
Refresh kvm->arch.apic_map_dirty to opportunistically change it from
DIRTY => UPDATE_IN_PROGRESS to avoid an unnecessary recalc from a
different task, i.e. if another task is waiting to attempt an update
(which is likely since a retry happens if and only if an update is
required).
Link: https://lore.kernel.org/r/20230602233250.1014316-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM snapshots the host's MSR_IA32_ARCH_CAPABILITIES, drop the
similar snapshot/cache of whether or not KVM is allowed to manipulate
MSR_IA32_MCU_OPT_CTRL.FB_CLEAR_DIS. The motivation for the cache was
presumably to avoid the RDMSR, e.g. boot_cpu_has_bug() is quite cheap, and
modifying the vCPU's MSR_IA32_ARCH_CAPABILITIES is an infrequent option
and a relatively slow path.
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20230607004311.1420507-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Snapshot the host's MSR_IA32_ARCH_CAPABILITIES, if it's supported, instead
of reading the MSR every time KVM wants to query the host state, e.g. when
initializing the default value during vCPU creation. The paths that query
ARCH_CAPABILITIES aren't particularly performance sensitive, but creating
vCPUs is a frequent enough operation that burning 8 bytes is a good
trade-off.
Alternatively, KVM could add a field in kvm_caps and thus skip the
on-demand calculations entirely, but a pure snapshot isn't possible due to
the way KVM handles the l1tf_vmx_mitigation module param. And unlike the
other "supported" fields in kvm_caps, KVM doesn't enforce the "supported"
value, i.e. KVM treats ARCH_CAPABILITIES like a CPUID leaf and lets
userspace advertise whatever it wants. Those problems are solvable, but
it's not clear there is real benefit versus snapshotting the host value,
and grabbing the host value will allow additional cleanup of KVM's
FB_CLEAR_CTRL code.
Link: https://lore.kernel.org/all/20230524061634.54141-2-chao.gao@intel.com
Cc: Chao Gao <chao.gao@intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20230607004311.1420507-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise CPUID 0x80000005 (L1 cache and TLB info) to userspace so that
VMMs that reflect KVM_GET_SUPPORTED_CPUID into KVM_SET_CPUID2 will
enumerate sane cache/TLB information to the guest.
CPUID 0x80000006 (L2 cache and TLB and L3 cache info) has been returned
since commit 43d05de2bee7 ("KVM: pass through CPUID(0x80000006)").
Enumerating both 0x80000005 and 0x80000006 with KVM_GET_SUPPORTED_CPUID
is better than reporting one or the other, and 0x80000005 could be helpful
for VMM to pass it to KVM_SET_CPUID{,2} for the same reason with
0x80000006.
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Link: https://lore.kernel.org/all/ZK7NmfKI9xur%2FMop@google.com
Link: https://lore.kernel.org/r/20230712183136.85561-1-itazur@amazon.com
[sean: add link, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove x86_emulate_ops::guest_has_long_mode along with its implementation,
emulator_guest_has_long_mode(). It has been unused since commit
1d0da94cdafe ("KVM: x86: do not go through ctxt->ops when emulating rsm").
No functional change intended.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230718101809.1249769-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use sysfs_emit() instead of the sprintf() for sysfs entries. sysfs_emit()
knows the maximum of the temporary buffer used for outputting sysfs
content and avoids overrunning the buffer length.
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230625073438.57427-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
group exists yet but the code still goes and iterates over event
siblings
-----BEGIN PGP SIGNATURE-----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=KqCi
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a lockdep warning when the event given is the first one, no event
group exists yet but the code still goes and iterates over event
siblings
* tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix lockdep warning in for_each_sibling_event() on SPR
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
-----BEGIN PGP SIGNATURE-----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=fq/x
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Mark copy_iovec_from_user() __noclone in order to prevent gcc from
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iov_iter: Mark copy_iovec_from_user() noclone
objtool: initialize all of struct elf
- Fix the idle sibling selection
-----BEGIN PGP SIGNATURE-----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=bSNb
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove a cgroup from under a polling process properly
- Fix the idle sibling selection
* tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: use kernfs polling functions for PSI trigger polling
sched/fair: Use recent_used_cpu to test p->cpus_ptr
- Fix a really annoying interrupt storm in the AMD driver
affecting Asus TUF gaming notebooks.
- Fix device tree parsing in the Renesas driver.
-----BEGIN PGP SIGNATURE-----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=LMMZ
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"I'm mostly on vacation but what would vacation be without a few
critical fixes so people can use their gaming laptops when hiding away
from the sun (or rain)?
- Fix a really annoying interrupt storm in the AMD driver affecting
Asus TUF gaming notebooks
- Fix device tree parsing in the Renesas driver"
* tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Unify debounce handling into amd_pinconf_set()
pinctrl: amd: Drop pull up select configuration
pinctrl: amd: Use amd_pinconf_set() for all config options
pinctrl: amd: Only use special debounce behavior for GPIO 0
pinctrl: renesas: rzg2l: Handle non-unique subnode names
pinctrl: renesas: rzv2m: Handle non-unique subnode names
-----BEGIN PGP SIGNATURE-----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=kcX/
-----END PGP SIGNATURE-----
Merge tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two reconnect fixes: important fix to address inFlight count to leak
(which can leak credits), and fix for better handling a deleted share
- DFS fix
- SMB1 cleanup fix
- deferred close fix
* tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix mid leak during reconnection after timeout threshold
cifs: is_network_name_deleted should return a bool
smb: client: fix missed ses refcounting
smb: client: Fix -Wstringop-overflow issues
cifs: if deferred close is disabled then close files immediately
- Fix Speculation_Store_Bypass reporting in /proc/self/status on Power10.
- Fix HPT with 4K pages since recent changes by implementing pmd_same().
- Fix 64-bit native_hpte_remove() to be irq-safe.
Thanks to: Aneesh Kumar K.V, Nageswara R Sastry, Russell Currey.
-----BEGIN PGP SIGNATURE-----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=q5Nn
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix Speculation_Store_Bypass reporting in /proc/self/status on
Power10
- Fix HPT with 4K pages since recent changes by implementing pmd_same()
- Fix 64-bit native_hpte_remove() to be irq-safe
Thanks to Aneesh Kumar K.V, Nageswara R Sastry, and Russell Currey.
* tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
powerpc/64e: Fix obtool warnings in exceptions-64e.S
powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
powerpc/64s: Fix native_hpte_remove() to be irq-safe
- fprobe: Add a comment why fprobe will be skipped if another kprobe is
running in fprobe_kprobe_handler().
- probe-events: Fix some issues related to fetch-argument
. Fix double counting of the string length for user-string and symstr.
This will require longer buffer in the array case.
. Fix not to count error code (minus value) for the total used length
in array argument. This makes the total used length shorter.
. Fix to update dynamic used data size counter only if fetcharg uses
the dynamic size data. This may mis-count the used dynamic data
size and corrupt data.
. Revert "tracing: Add "(fault)" name injection to kernel probes"
because that did not work correctly with a bug, and we agreed the
current '(fault)' output (instead of '"(fault)"' like a string)
explains what happened more clearly.
. Fix to record 0-length (means fault access) data_loc data in fetch
function itself, instead of store_trace_args(). If we record an
array of string, this will fix to save fault access data on each
entry of the array correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmSxSlYACgkQ2/sHvwUr
PxupyAgApFDi9YGsmrVbXmIN5y+yGMyio2H6xR7XkX+L02nvDY6uVqL/jgT8pHfI
AeGZEA+EqwxIfWpYBfztsFej+Gl3Elfvu14OSxwaafUlW3mgZFQqw1ZR0HvzXoKJ
8Iw6WOXjhLe3/QLy43UY8JQGOKI07i3gh71wa0W0huOyiwwHuuVwPSY9QJJ2ulSg
OWFSuMFO8IxYimp0BpFu/vrfa8CdgWLc24tgJ5EpZtzu6L0A2I/FMZjnBukxnP9s
rjAXv0uRuSFvvF7/RGCqrLza12525qyHx7d5IWUq5shd3bCnaUOnAieF//MoJaR3
q8McDJK//EPbUvCWgESuuyPS05smyQ==
=iumA
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- fprobe: Add a comment why fprobe will be skipped if another kprobe is
running in fprobe_kprobe_handler().
- probe-events: Fix some issues related to fetch-arguments:
- Fix double counting of the string length for user-string and
symstr. This will require longer buffer in the array case.
- Fix not to count error code (minus value) for the total used
length in array argument. This makes the total used length
shorter.
- Fix to update dynamic used data size counter only if fetcharg uses
the dynamic size data. This may mis-count the used dynamic data
size and corrupt data.
- Revert "tracing: Add "(fault)" name injection to kernel probes"
because that did not work correctly with a bug, and we agreed the
current '(fault)' output (instead of '"(fault)"' like a string)
explains what happened more clearly.
- Fix to record 0-length (means fault access) data_loc data in fetch
function itself, instead of store_trace_args(). If we record an
array of string, this will fix to save fault access data on each
entry of the array correctly.
* tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
Revert "tracing: Add "(fault)" name injection to kernel probes"
tracing/probes: Fix to update dynamic data counter if fetcharg uses it
tracing/probes: Fix not to count error code to total length
tracing/probes: Fix to avoid double count of the string length on the array
fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running
A couple of fairly minor driver specific fixes here, plus a bunch of
maintainership and admin updates. Nothing too remarkable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSyiH8ACgkQJNaLcl1U
h9AONwf9F4qxceaYLgOcCvY+kqamIXLaX7RMuBlVxaNSowBQdK0V0TMnyJ0SKhKN
pN2lTRJBg9uHka5UoUNDnwbLPdhrGymSAMZRwytxztC+n1SCi+ic3R4YRhBG7Aql
n8kxZqzzg0hWrV0eVD1tTMx2fhab6/qfyAsBVyup6VpwfLyHyQ1bB/74m9F21GZL
2TK3PdElAF4pj1ug6c1LiMqgP41dxuh/oKFUTL2FSt8apIIrw66F3GNb/ANoqd/d
40oNMsgSYEgkUZJqGha6pS/zrLdT1/+zJ7jayy9odSTqRR6/1e+FoPz6wthZb0XC
iCMthULffLhmy4dIHBZhIbU29J15Pg==
=9Sbr
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fairly minor driver specific fixes here, plus a bunch of
maintainership and admin updates. Nothing too remarkable"
* tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
mailmap: add entry for Jonas Gorski
MAINTAINERS: add myself for spi-bcm63xx
spi: s3c64xx: clear loopback bit after loopback test
spi: bcm63xx: fix max prepend length
MAINTAINERS: Add myself as a maintainer for Microchip SPI
One fix for an out of bounds access in the interupt code here.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSyiBQACgkQJNaLcl1U
h9BIYAf/crdxL07Kw9AZB9wmYLyjD/+p6GZsBLUmzBe99m1aaxpg9df+xje3jymF
H90A8nx25n7JR3l/BTeJwvwzHjni0vMn1OhzzI86sbaZ4vRf4cgfhvpGlPWqWlVx
3P0S7EwQc8M96bAVMTI1rfn8dc4supv9MMZXOkaLVsQsEHEZq6LIj279q1mL8aLZ
Q4x+rbn9jMh3T8TtM5K2/AFJGTLPi3fmYXvT8L+7Iu/Uk8PmXtw31GS8E/dYPvmt
iWWIdOPnniMOy/DDe/USCZvLyw6lGRS/uc4bh14mrQ3ddJ2RoReUL7AiyyKNXQ3Q
LYQjpQ4/fcPE6JUu/W5eTI9BFE5tEg==
=o9eY
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"One fix for an out of bounds access in the interupt code here"
* tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Fix out-of-bounds access when allocating config buffers
Including:
- Fix a regression causing a crash on sysfs access of iommu-group
specific files
- Fix signedness bug in SVA code
-----BEGIN PGP SIGNATURE-----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=iFwG
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a regression causing a crash on sysfs access of iommu-group
specific files
- Fix signedness bug in SVA code
* tag 'iommu-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/sva: Fix signedness bug in iommu_sva_alloc_pasid()
iommu: Fix crash during syfs iommu_groups/N/type
The primary bug Alyssa noticed was that with FineIBT enabled function
prologues have a spurious ENDBR instruction:
__cfi_foo:
endbr64
subl $hash, %r10d
jz 1f
ud2
nop
1:
foo:
endbr64 <--- *sadface*
This means that any indirect call that fails to target the __cfi symbol
and instead targets (the regular old) foo+0, will succeed due to that
second ENDBR.
Fixing this lead to the discovery of a single indirect call that was
still doing this: ret_from_fork(), since that's an assembly stub the
compmiler would not generate the proper kCFI indirect call magic and it
would not get patched.
Brian came up with the most comprehensive fix -- convert the thing to C
with only a very thin asm wrapper. This ensures the kernel thread
boostrap is a proper kCFI call.
While discussing all this, Kees noted that kCFI hashes could/should be
poisoned to seal all functions whose address is never taken, further
limiting the valid kCFI targets -- much like we already do for IBT.
So what was a 'simple' observation and fix cascaded into a bunch of
inter-related CFI infrastructure fixes.
-----BEGIN PGP SIGNATURE-----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=RhPI
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CFI fixes from Peter Zijlstra:
"Fix kCFI/FineIBT weaknesses
The primary bug Alyssa noticed was that with FineIBT enabled function
prologues have a spurious ENDBR instruction:
__cfi_foo:
endbr64
subl $hash, %r10d
jz 1f
ud2
nop
1:
foo:
endbr64 <--- *sadface*
This means that any indirect call that fails to target the __cfi
symbol and instead targets (the regular old) foo+0, will succeed due
to that second ENDBR.
Fixing this led to the discovery of a single indirect call that was
still doing this: ret_from_fork(). Since that's an assembly stub the
compiler would not generate the proper kCFI indirect call magic and it
would not get patched.
Brian came up with the most comprehensive fix -- convert the thing to
C with only a very thin asm wrapper. This ensures the kernel thread
boostrap is a proper kCFI call.
While discussing all this, Kees noted that kCFI hashes could/should be
poisoned to seal all functions whose address is never taken, further
limiting the valid kCFI targets -- much like we already do for IBT.
So what was a 'simple' observation and fix cascaded into a bunch of
inter-related CFI infrastructure fixes"
* tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
x86/fineibt: Poison ENDBR at +0
x86: Rewrite ret_from_fork() in C
x86/32: Remove schedule_tail_wrapper()
x86/cfi: Extend ENDBR sealing to kCFI
x86/alternative: Rename apply_ibt_endbr()
x86/cfi: Extend {JMP,CAKK}_NOSPEC comment
This is a bunch of small driver fixes and a larger rework of zone disk
handling (which reaches into blk and nvme). The aacraid array-bounds
fix is now critical since the security people turned on -Werror for
some build tests, which now fail without it.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZLGSiCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishd/BAPwO2i4t
5uzhcWihoYaIZ6x07oEhgOP/o1h5n5mM908AyAEA6s2hQKDoIxjJexqvkS7lPjni
P8VMcfvOmdsLDCD3nJ4=
=+10g
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a bunch of small driver fixes and a larger rework of zone disk
handling (which reaches into blk and nvme).
The aacraid array-bounds fix is now critical since the security people
turned on -Werror for some build tests, which now fail without it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: storvsc: Handle SRB status value 0x30
scsi: block: Improve checks in blk_revalidate_disk_zones()
scsi: block: virtio_blk: Set zone limits before revalidating zones
scsi: block: nullblk: Set zone limits before revalidating zones
scsi: nvme: zns: Set zone limits before revalidating zones
scsi: sd_zbc: Set zone limits before revalidating zones
scsi: ufs: core: Add support for qTimestamp attribute
scsi: aacraid: Avoid -Warray-bounds warning
scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
scsi: ufs: core: Update contact email for monitor sysfs nodes
scsi: scsi_debug: Remove dead code
scsi: qla2xxx: Use vmalloc_array() and vcalloc()
scsi: fnic: Use vmalloc_array() and vcalloc()
scsi: qla2xxx: Fix error code in qla2x00_start_sp()
scsi: qla2xxx: Silence a static checker warning
scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()
-----BEGIN PGP SIGNATURE-----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=ao7r
-----END PGP SIGNATURE-----
Merge tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Don't require quirk to use duplicate namespace identifiers
(Christoph, Sagi)
- One more BOGUS_NID quirk (Pankaj)
- IO timeout and error hanlding fixes for PCI (Keith)
- Enhanced metadata format mask fix (Ankit)
- Association race condition fix for fibre channel (Michael)
- Correct debugfs error checks (Minjie)
- Use PAGE_SECTORS_SHIFT where needed (Damien)
- Reduce kernel logs for legacy nguid attribute (Keith)
- Use correct dma direction when unmapping metadata (Ming)
- Fix for a flush handling regression in this release (Christoph)
- Fix for batched request time stamping (Chengming)
- Fix for a regression in the mq-deadline position calculation (Bart)
- Lockdep fix for blk-crypto (Eric)
- Fix for a regression in the Amiga partition handling changes
(Michael)
* tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux:
block: queue data commands from the flush state machine at the head
blk-mq: fix start_time_ns and alloc_time_ns for pre-allocated rq
nvme-pci: fix DMA direction of unmapping integrity data
nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
block/mq-deadline: Fix a bug in deadline_from_pos()
nvme: ensure disabling pairs with unquiesce
nvme-fc: fix race between error recovery and creating association
nvme-fc: return non-zero status code when fails to create association
nvme: fix parameter check in nvme_fault_inject_init()
nvme: warn only once for legacy uuid attribute
block: remove dead struc request->completion_data field
nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
nvmet: use PAGE_SECTORS_SHIFT
nvme: add BOGUS_NID quirk for Samsung SM953
blk-crypto: use dynamic lock class for blk_crypto_profile::lock
block/partition: fix signedness issue for Amiga partitions
-----BEGIN PGP SIGNATURE-----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=UPCD
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.5-2023-07-14' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a single tweak for the wait logic in io_uring"
* tag 'io_uring-6.5-2023-07-14' of git://git.kernel.dk/linux:
io_uring: Use io_schedule* in cqring wait
* A fix for a formatting error in the hwprobe documentation.
* A fix for a spurious warning in the RISC-V PMU driver.
* A fix for memory detection on rv32, which does not manifest on any
known system.
* A fix to avoid parsing legacy parsing of I in ACPI ISA strings.
-----BEGIN PGP SIGNATURE-----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=8UWu
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix a formatting error in the hwprobe documentation
- fix a spurious warning in the RISC-V PMU driver
- fix memory detection on rv32 (problem does not manifest on any known
system)
- avoid parsing legacy parsing of I in ACPI ISA strings
* tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Don't include Zicsr or Zifencei in I from ACPI
riscv: mm: fix truncation warning on RV32
perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
Documentation: RISC-V: hwprobe: Fix a formatting error
- Unbreak the /sys/power/resume interface after recent changes (Azat
Khuzhin).
- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
Yang).
- Remove __init from cpufreq callbacks in the sparc driver, because
they may be called after initialization too (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=b/om
-----END PGP SIGNATURE-----
Merge tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix hibernation (after recent changes), frequency QoS and the
sparc cpufreq driver.
Specifics:
- Unbreak the /sys/power/resume interface after recent changes (Azat
Khuzhin).
- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
Yang).
- Remove __init from cpufreq callbacks in the sparc driver, because
they may be called after initialization too (Viresh Kumar)"
* tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: sparc: Don't mark cpufreq callbacks with __init
PM: QoS: Restore support for default value on frequency QoS
PM: hibernate: Fix writing maj:min to /sys/power/resume
