IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When u32_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: de5df63228fc ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Reported-by: valis <sec@valis.email>
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two mbox-related mutexes are destroyed in octep_ctrl_mbox_uninit(),
but the corresponding mutex_init calls were missing.
A "DEBUG_LOCKS_WARN_ON(lock->magic != lock)" warning was emitted with
CONFIG_DEBUG_MUTEXES on.
Initialize the two mutexes in octep_ctrl_mbox_init().
Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230729151516.24153-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to other recently fixed drivers make sure we don't
try to access XDP or page pool APIs when NAPI budget is 0.
NAPI budget of 0 may mean that we are in netpoll.
This may result in running software IRQs in hard IRQ context,
leading to deadlocks or crashes.
To make sure bnapi->tx_pkts don't get wiped without handling
the events, move clearing the field into the handler itself.
Remember to clear tx_pkts after reset (bnxt_enable_napi())
as it's technically possible that netpoll will accumulate
some tx_pkts and then a reset will happen, leaving tx_pkts
out of sync with reality.
Fixes: 322b87ca55f2 ("bnxt_en: add page_pool support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230728205020.2784844-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During qdisc create/delete, it is necessary to rebuild the queue
of VSIs. An error occurred because the VSIs created by RDMA were
still active.
Added check if RDMA is active. If yes, it disallows qdisc changes
and writes a message in the system logs.
Fixes: 348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Rafal Rogalski <rafalx.rogalski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171243.2446101-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a struct_group for the whole packet body so we can copy it in one
go without triggering FORTIFY_SOURCE complaints.
Fixes: cf60ed469629 ("sfc: use padding to fix alignment in loopback test")
Fixes: 30c24dd87f3f ("sfc: siena: use padding to fix alignment in loopback test")
Fixes: 1186c6b31ee1 ("sfc: falcon: use padding to fix alignment in loopback test")
Reviewed-by: Andy Moreton <andy.moreton@amd.com>
Tested-by: Andy Moreton <andy.moreton@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230728165528.59070-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The timer dev->stat_monitor can schedule the delayed work dev->wq and
the delayed work dev->wq can also arm the dev->stat_monitor timer.
When the device is detaching, the net_device will be deallocated. but
the net_device private data could still be dereferenced in delayed work
or timer handler. As a result, the UAF bugs will happen.
One racy situation is shown below:
(Thread 1) | (Thread 2)
lan78xx_stat_monitor() |
... | lan78xx_disconnect()
lan78xx_defer_kevent() | ...
... | cancel_delayed_work_sync(&dev->wq);
schedule_delayed_work() | ...
(wait some time) | free_netdev(net); //free net_device
lan78xx_delayedwork() |
//use net_device private data |
dev-> //use |
Although we use cancel_delayed_work_sync() to cancel the delayed work
in lan78xx_disconnect(), it could still be scheduled in timer handler
lan78xx_stat_monitor().
Another racy situation is shown below:
(Thread 1) | (Thread 2)
lan78xx_delayedwork |
mod_timer() | lan78xx_disconnect()
| cancel_delayed_work_sync()
(wait some time) | if (timer_pending(&dev->stat_monitor))
| del_timer_sync(&dev->stat_monitor);
lan78xx_stat_monitor() | ...
lan78xx_defer_kevent() | free_netdev(net); //free
//use net_device private data|
dev-> //use |
Although we use del_timer_sync() to delete the timer, the function
timer_pending() returns 0 when the timer is activated. As a result,
the del_timer_sync() will not be executed and the timer could be
re-armed.
In order to mitigate this bug, We use timer_shutdown_sync() to shutdown
the timer and then use cancel_delayed_work_sync() to cancel the delayed
work. As a result, the net_device could be deallocated safely.
What's more, the dev->flags is set to EVENT_DEV_DISCONNECT in
lan78xx_disconnect(). But it could still be set to EVENT_STAT_UPDATE
in lan78xx_stat_monitor(). So this patch put the set_bit() behind
timer_shutdown_sync().
Fixes: 77dfff5bb7e2 ("lan78xx: Fix race condition in disconnect handling")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Use unevaluatedProperties
It's needed to allow ethernet-controller.yaml properties work correctly.
2. Drop unneeded phy-handle/phy-mode
3. Don't require phy-handle
Some SoCs may use fixed link.
For in-kernel MT7621 DTS files this fixes following errors:
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'phy-handle' is a required property
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'phy-handle' is a required property
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:
Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Co-developed-by: Eric Dumazet <edumazet@google.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
net: annotate data-races
This series was inspired by a syzbot/KCSAN report.
This will later also permit some optimizations,
like not having to lock the socket while reading/writing
some of its fields.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs locklessly. This means sk->sk_priority
can be read while other threads are changing its value.
Other reads also happen without socket lock being held.
Add missing annotations where needed.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a prior commit I forgot that sk_getsockopt() reads
sk->sk_ll_usec without holding a lock.
Fixes: 0dbffbb5335a ("net: annotate data race around sk_ll_usec")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs locklessly, thus we need to annotate the read
of sk->sk_peek_off.
While we are at it, add corresponding annotations to sk_set_peek_off()
and unix_set_peek_off().
Fixes: b9bb53f3836f ("sock: convert sk_peek_offset functions to WRITE_ONCE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk->sk_mark is often read while another thread could change the value.
Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvbuf locklessly.
Fixes: ebb3b78db7bf ("tcp: annotate sk->sk_rcvbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_sndbuf locklessly.
Fixes: e292f05e0df7 ("tcp: annotate sk->sk_sndbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs without locks, we must add annotations
to sk->sk_rcvtimeo and sk->sk_sndtimeo.
In the future we might allow fetching these fields before
we lock the socket in TCP fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvlowat locklessly.
Fixes: eac66402d1c3 ("net: annotate sk->sk_rcvlowat lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs locklessly. This means sk->sk_max_pacing_rate
can be read while other threads are changing its value.
Fixes: 62748f32d501 ("net: introduce SO_MAX_PACING_RATE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs locklessly. This means sk->sk_txrehash
can be read while other threads are changing its value.
Other locations were handled in commit cb6cd2cec799
("tcp: Change SYN ACK retransmit behaviour to account for rehash")
Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs locklessly. This means sk->sk_reserved_mem
can be read while other threads are changing its value.
Add missing annotations where they are needed.
Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a misuse of IP{6}CB(skb) in GRO, while calling to
`udp6_lib_lookup2` when handling udp tunnels. `udp6_lib_lookup2` fetch the
device from CB. The fix changes it to fetch the device from `skb->dev`.
l3mdev case requires special attention since it has a master and a slave
device.
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Reported-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here we've got to a situation when tasklet called usleep_range() in PTT
acquire logic, thus welcome to the "scheduling while atomic" BUG().
BUG: scheduling while atomic: swapper/24/0/0x00000100
[<ffffffffb41c6199>] schedule+0x29/0x70
[<ffffffffb41c5512>] schedule_hrtimeout_range_clock+0xb2/0x150
[<ffffffffb41c55c3>] schedule_hrtimeout_range+0x13/0x20
[<ffffffffb41c3bcf>] usleep_range+0x4f/0x70
[<ffffffffc08d3e58>] qed_ptt_acquire+0x38/0x100 [qed]
[<ffffffffc08eac48>] _qed_get_vport_stats+0x458/0x580 [qed]
[<ffffffffc08ead8c>] qed_get_vport_stats+0x1c/0xd0 [qed]
[<ffffffffc08dffd3>] qed_get_protocol_stats+0x93/0x100 [qed]
qed_mcp_send_protocol_stats
case MFW_DRV_MSG_GET_LAN_STATS:
case MFW_DRV_MSG_GET_FCOE_STATS:
case MFW_DRV_MSG_GET_ISCSI_STATS:
case MFW_DRV_MSG_GET_RDMA_STATS:
[<ffffffffc08e36d8>] qed_mcp_handle_events+0x2d8/0x890 [qed]
qed_int_assertion
qed_int_attentions
[<ffffffffc08d9490>] qed_int_sp_dpc+0xa50/0xdc0 [qed]
[<ffffffffb3aa7623>] tasklet_action+0x83/0x140
[<ffffffffb41d9125>] __do_softirq+0x125/0x2bb
[<ffffffffb41d560c>] call_softirq+0x1c/0x30
[<ffffffffb3a30645>] do_softirq+0x65/0xa0
[<ffffffffb3aa78d5>] irq_exit+0x105/0x110
[<ffffffffb41d8996>] do_IRQ+0x56/0xf0
Fix this by making caller to provide the context whether it could be in
atomic context flow or not when getting stats from QED driver.
QED driver based on the context provided decide to schedule out or not
when acquiring the PTT BAR window.
We faced the BUG_ON() while getting vport stats, but according to the
code same issue could happen for fcoe and iscsi statistics as well, so
fixing them too.
Fixes: 6c75424612a7 ("qed: Add support for NCSI statistics.")
Fixes: 1e128c81290a ("qed: Add support for hardware offloaded FCoE.")
Fixes: 2f2b2614e893 ("qed: Provide iSCSI statistics to management")
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: David Miller <davem@davemloft.net>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit (SHA1: 5c844d57aa7894154e49cf2fc648bfe2f1aefc1c) provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.
Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.
As a result, following error is observed and KSZ9477 is not properly
configured:
ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The clock data is an array of struct clk_bulk_data, so make sure to
allocate enough memory.
Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As &hc->lock is acquired by both timer _hfcpci_softirq() and hardirq
hfcpci_int(), the timer should disable irq before lock acquisition
otherwise deadlock could happen if the timmer is preemtped by the hadr irq.
Possible deadlock scenario:
hfcpci_softirq() (timer)
-> _hfcpci_softirq()
-> spin_lock(&hc->lock);
<irq interruption>
-> hfcpci_int()
-> spin_lock(&hc->lock); (deadlock here)
This flaw was found by an experimental static analysis tool I am developing
for irq-related deadlock.
The tentative patch fixes the potential deadlock by spin_lock_irq()
in timer.
Fixes: b36b654a7e82 ("mISDN: Create /sys/class/mISDN")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230727085619.7419-1-dg573847474@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A match entry is uniquely identified with an "address" or "path" in the
form of: hashtable ID(12b):bucketid(8b):nodeid(12b).
When creating table match entries all of hash table id, bucket id and
node (match entry id) are needed to be either specified by the user or
reasonable in-kernel defaults are used. The in-kernel default for a table id is
0x800(omnipresent root table); for bucketid it is 0x0. Prior to this fix there
was none for a nodeid i.e. the code assumed that the user passed the correct
nodeid and if the user passes a nodeid of 0 (as Mingi Cho did) then that is what
was used. But nodeid of 0 is reserved for identifying the table. This is not
a problem until we dump. The dump code notices that the nodeid is zero and
assumes it is referencing a table and therefore references table struct
tc_u_hnode instead of what was created i.e match entry struct tc_u_knode.
Ming does an equivalent of:
tc filter add dev dummy0 parent 10: prio 1 handle 0x1000 \
protocol ip u32 match ip src 10.0.0.1/32 classid 10:1 action ok
Essentially specifying a table id 0, bucketid 1 and nodeid of zero
Tableid 0 is remapped to the default of 0x800.
Bucketid 1 is ignored and defaults to 0x00.
Nodeid was assumed to be what Ming passed - 0x000
dumping before fix shows:
~$ tc filter ls dev dummy0 parent 10:
filter protocol ip pref 1 u32 chain 0
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor -30591
Note that the last line reports a table instead of a match entry
(you can tell this because it says "ht divisor...").
As a result of reporting the wrong data type (misinterpretting of struct
tc_u_knode as being struct tc_u_hnode) the divisor is reported with value
of -30591. Ming identified this as part of the heap address
(physmap_base is 0xffff8880 (-30591 - 1)).
The fix is to ensure that when table entry matches are added and no
nodeid is specified (i.e nodeid == 0) then we get the next available
nodeid from the table's pool.
After the fix, this is what the dump shows:
$ tc filter ls dev dummy0 parent 10:
filter protocol ip pref 1 u32 chain 0
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 1 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 10:1 not_in_hw
match 0a000001/ffffffff at 12
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
Reported-by: Mingi Cho <mgcho.minic@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230726135151.416917-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The range and the defaults are specified in the description instead of
being specified in the schema.
Fix it by adding the default value in the `default` field and specifying
the range as `minimum` and `maximum`.
Fixes: b331b8ef86f0 ("dt-bindings: net: convert rockchip-dwmac to json-schema")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmTBkJkACgkQSD+KveBX
+j75KQf/Z2jvvcoH5aXCunGgF6+cbZGQ7KRIuxChgeHH1bYofNEAIiG4MmJEk7yi
8fs9ZJwAvQSZ3L7/VgeBrQ7l/qypIdg40QrA2b0vUUqLvObHbtM3sRcXGXkFmIL9
6gMiUsnhTeyBV4R3c7ViqPeEvPh0R7SLvvYd1QLemfJuWG9F7v8Tx87I0fVU9U3n
jqRpIcQjVg/o4ZlW0Jyh1BPqE9INPdmTTUiBt3fmfbLtbP8xRVcLpabeXyd2tDLl
yIXettLF97GwyzkMXu8zAx7mjRFZvbz7Tb2/g7sWNC7UlZmd4ho4jUHCTFuIUMwh
0+AVBW7RxhgL+VjXsGcPhSn8gnb1rw==
=MY4I
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2023-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-07-26
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Unregister devlink params in case interface is down
net/mlx5: DR, Fix peer domain namespace setting
net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supported
net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reload
net/mlx5: Bridge, set debugfs access right to root-only
net/mlx5e: xsk: Fix crash on regular rq reactivation
net/mlx5e: xsk: Fix invalid buffer access for legacy rq
net/mlx5e: Move representor neigh cleanup to profile cleanup_tx
net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is set
net/mlx5e: Don't hold encap tbl lock if there is no encap action
net/mlx5: Honor user input for migratable port fn attr
net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer()
net/mlx5: fix potential memory leak in mlx5e_init_rep_rx
net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx
net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groups
====================
Link: https://lore.kernel.org/r/20230726213206.47022-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in bcm_sf2_sw_probe(), check the return value of clk_prepare_enable()
and return the error code if clk_prepare_enable() returns an
unexpected value.
Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230726170506.16547-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I tried to get stmmac maintainers to be more active by agreeing with
them off-list on a review rotation. I pinged Peppe 3 times over 2 weeks
during his "shift month", no reviews are flowing.
All the contributions are much appreciated! But stmmac is quite
active, we need participating maintainers :(
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230726151120.1649474-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Older DSA drivers that do not provide an dsa_ops adjust_link method end
up using phylink. Unfortunately, a recent phylink change that requires
its supported_interfaces bitmap to be filled breaks these drivers
because the bitmap remains empty.
Rather than fixing each driver individually, fix it in the core code so
we have a sensible set of defaults.
Reported-by: Sergei Antonov <saproj@gmail.com>
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com> # dsa_loop
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1qOflM-001AEz-D3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are totally 9 ndo_bridge_setlink handlers in the current kernel,
which are 1) bnxt_bridge_setlink, 2) be_ndo_bridge_setlink 3)
i40e_ndo_bridge_setlink 4) ice_bridge_setlink 5)
ixgbe_ndo_bridge_setlink 6) mlx5e_bridge_setlink 7)
nfp_net_bridge_setlink 8) qeth_l2_bridge_setlink 9) br_setlink.
By investigating the code, we find that 1-7 parse and use nlattr
IFLA_BRIDGE_MODE but 3 and 4 forget to do the nla_len check. This can
lead to an out-of-attribute read and allow a malformed nlattr (e.g.,
length 0) to be viewed as a 2 byte integer.
To avoid such issues, also for other ndo_bridge_setlink handlers in the
future. This patch adds the nla_len check in rtnl_bridge_setlink and
does an early error return if length mismatches. To make it works, the
break is removed from the parsing for IFLA_BRIDGE_FLAGS to make sure
this nla_for_each_nested iterates every attribute.
Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink")
Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230726075314.1059224-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Driver fixes for
- Out of bound fix for hisilicon phy
- Qualcomm synopsis femto phy for keeping clock enabled during suspend
and enabling ref clocks
- Mediatek driver fixes for upper limit test and error code
-----BEGIN PGP SIGNATURE-----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=nyhr
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Out of bound fix for hisilicon phy
- Qualcomm synopsis femto phy for keeping clock enabled during suspend
and enabling ref clocks
- Mediatek driver fixes for upper limit test and error code
* tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()
phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code
phy: qcom-snps-femto-v2: properly enable ref clock
phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend
phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test
phy: phy-mtk-dp: Fix an error code in probe()
-----BEGIN PGP SIGNATURE-----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=Y/po
-----END PGP SIGNATURE-----
Merge tag 'for-6.5-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix accounting of global block reserve size when block group tree is
enabled
- the async discard has been enabled in 6.2 unconditionally, but for
zoned mode it does not make that much sense to do it asynchronously
as the zones are reset as needed
- error handling and proper error value propagation fixes
* tag 'for-6.5-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: check for commit error at btrfs_attach_transaction_barrier()
btrfs: check if the transaction was aborted at btrfs_wait_for_commit()
btrfs: remove BUG_ON()'s in add_new_free_space()
btrfs: account block group tree when calculating global reserve size
btrfs: zoned: do not enable async discard
A call to memblock_free() or memblock_phys_free() issued after memblock
data is discarded will result in use after free in
memblock_isolate_range().
When CONFIG_KASAN is enabled, this will cause a panic early in boot.
Without CONFIG_KASAN, there is a chance that memblock_isolate_range() might
scribble on memory that is now in use by somebody else.
Avoid those issues by making sure that memblock_discard points
memblock.reserved.regions back at the static buffer.
If memblock_free() or memblock_phys_free() is called after memblock memory
is discarded, that will print a warning in memblock_remove_region().
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmTB94cQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kesHB/4rNvGFGEI8LFxooARLt8glcv0Hn7oJ+z3L
Xyczw1ZkglT3DEYsoY78bSriddWPqrV3wWkr+p2NYXPBJWgQZ6t3DRZviqzXcj2l
Ew2XwLAfT6Vay1eqEFfJJvkGg27QLhnmJPnjDzCWweiXUaR5xOESwKCBmZBWeXUU
t5EFJMIXLVEoBDLGW5kk+Q4RZDqhU/sJWDqf4ciWQ5vDS8OFTr56hfth7T8XoMxm
BPlC21+cEJUWrbb1gAJUMbIERTzvYg8odZqSAESlHyNyDEtYjyLce5W6HA6zHK+H
2gqiti+Pd1OyHbJUc1lN7iRTE8FJ7DQcBr6H9sk81Po5af02Ky7m
=FRx8
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"A call to memblock_free() or memblock_phys_free() issued after
memblock data is discarded will result in use after free in
memblock_isolate_range().
Avoid those issues by making sure that memblock_discard points
memblock.reserved.regions back at the static buffer"
* tag 'fixes-2023-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm,memblock: reset memblock.reserved to system init state to prevent UAF
lock_vma_under_rcu() tries to guarantee that __anon_vma_prepare() can't
be called in the VMA-locked page fault path by ensuring that
vma->anon_vma is set.
However, this check happens before the VMA is locked, which means a
concurrent move_vma() can concurrently call unlink_anon_vmas(), which
disassociates the VMA's anon_vma.
This means we can get UAF in the following scenario:
THREAD 1 THREAD 2
======== ========
<page fault>
lock_vma_under_rcu()
rcu_read_lock()
mas_walk()
check vma->anon_vma
mremap() syscall
move_vma()
vma_start_write()
unlink_anon_vmas()
<syscall end>
handle_mm_fault()
__handle_mm_fault()
handle_pte_fault()
do_pte_missing()
do_anonymous_page()
anon_vma_prepare()
__anon_vma_prepare()
find_mergeable_anon_vma()
mas_walk() [looks up VMA X]
munmap() syscall (deletes VMA X)
reusable_anon_vma() [called on freed VMA X]
This is a security bug if you can hit it, although an attacker would
have to win two races at once where the first race window is only a few
instructions wide.
This patch is based on some previous discussion with Linus Torvalds on
the security list.
Cc: stable@vger.kernel.org
Fixes: 5e31275cc997 ("mm: add per-VMA lock and helper functions to control it")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If tipc_link_bc_create() fails inside tipc_node_create() for a newly
allocated tipc node then we should stop its tipc crypto and free the
resources allocated with a call to tipc_crypto_start().
As the node ref is initialized to one to that point, just put the ref on
tipc_link_bc_create() error case that would lead to tipc_node_free() be
eventually executed and properly clean the node and its crypto resources.
Found by Linux Verification Center (linuxtesting.org).
Fixes: cb8092d70a6f ("tipc: move bc link creation back to tipc_node_create")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230725214628.25246-1-pchelkin@ispras.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
kernel test robot reported slab-out-of-bounds access in strlen(). [0]
Commit 06d4c8a80836 ("af_unix: Fix fortify_panic() in unix_bind_bsd().")
removed unix_mkname_bsd() call in unix_bind_bsd().
If sunaddr->sun_path is not terminated by user and we don't enable
CONFIG_INIT_STACK_ALL_ZERO=y, strlen() will do the out-of-bounds access
during file creation.
Let's go back to strlen()-with-sockaddr_storage way and pack all 108
trickiness into unix_mkname_bsd() with bold comments.
[0]:
BUG: KASAN: slab-out-of-bounds in strlen (lib/string.c:?)
Read of size 1 at addr ffff000015492777 by task fortify_strlen_/168
CPU: 0 PID: 168 Comm: fortify_strlen_ Not tainted 6.5.0-rc1-00333-g3329b603ebba #16
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:235)
show_stack (arch/arm64/kernel/stacktrace.c:242)
dump_stack_lvl (lib/dump_stack.c:107)
print_report (mm/kasan/report.c:365 mm/kasan/report.c:475)
kasan_report (mm/kasan/report.c:590)
__asan_report_load1_noabort (mm/kasan/report_generic.c:378)
strlen (lib/string.c:?)
getname_kernel (./include/linux/fortify-string.h:? fs/namei.c:226)
kern_path_create (fs/namei.c:3926)
unix_bind (net/unix/af_unix.c:1221 net/unix/af_unix.c:1324)
__sys_bind (net/socket.c:1792)
__arm64_sys_bind (net/socket.c:1801)
invoke_syscall (arch/arm64/kernel/syscall.c:? arch/arm64/kernel/syscall.c:52)
el0_svc_common (./include/linux/thread_info.h:127 arch/arm64/kernel/syscall.c:147)
do_el0_svc (arch/arm64/kernel/syscall.c:189)
el0_svc (./arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:144 arch/arm64/kernel/entry-common.c:648)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:?)
el0t_64_sync (arch/arm64/kernel/entry.S:591)
Allocated by task 168:
kasan_set_track (mm/kasan/common.c:45 mm/kasan/common.c:52)
kasan_save_alloc_info (mm/kasan/generic.c:512)
__kasan_kmalloc (mm/kasan/common.c:383)
__kmalloc (mm/slab_common.c:? mm/slab_common.c:998)
unix_bind (net/unix/af_unix.c:257 net/unix/af_unix.c:1213 net/unix/af_unix.c:1324)
__sys_bind (net/socket.c:1792)
__arm64_sys_bind (net/socket.c:1801)
invoke_syscall (arch/arm64/kernel/syscall.c:? arch/arm64/kernel/syscall.c:52)
el0_svc_common (./include/linux/thread_info.h:127 arch/arm64/kernel/syscall.c:147)
do_el0_svc (arch/arm64/kernel/syscall.c:189)
el0_svc (./arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:144 arch/arm64/kernel/entry-common.c:648)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:?)
el0t_64_sync (arch/arm64/kernel/entry.S:591)
The buggy address belongs to the object at ffff000015492700
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 0 bytes to the right of
allocated 119-byte region [ffff000015492700, ffff000015492777)
The buggy address belongs to the physical page:
page:00000000aeab52ba refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x55492
anon flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
page_type: 0xffffffff()
raw: 03fffc0000000200 ffff0000084018c0 fffffc00003d0e00 0000000000000005
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff000015492600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff000015492680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff000015492700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 fc
^
ffff000015492780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff000015492800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 06d4c8a80836 ("af_unix: Fix fortify_panic() in unix_bind_bsd().")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202307262110.659e5e8-oliver.sang@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230726190828.47874-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
goto free_skb if an unexpected result is returned by pskb_tirm()
in tipc_crypto_rcv_complete().
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20230725064810.5820-1-ruc_gongyuanjun@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
in be_lancer_xmit_workarounds(), it should go to label 'tx_drop'
if an unexpected value is returned by pskb_trim().
Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230725032726.15002-1-ruc_gongyuanjun@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=4wB/
-----END PGP SIGNATURE-----
Merge tag 'nf-23-07-26' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter fixes for net
1. On-demand overlap detection in 'rbtree' set can cause memory leaks.
This is broken since 6.2.
2. An earlier fix in 6.4 to address an imbalance in refcounts during
transaction error unwinding was incomplete, from Pablo Neira.
3. Disallow adding a rule to a deleted chain, also from Pablo.
Broken since 5.9.
* tag 'nf-23-07-26' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
====================
Link: https://lore.kernel.org/r/20230726152524.26268-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A race were found where set_channels could be called after registering
but before virtnet_set_queues() in virtnet_probe(). Fixing this by
moving the virtnet_set_queues() before netdevice registering. While at
it, use _virtnet_set_queues() to avoid holding rtnl as the device is
not even registered at that time.
Cc: stable@vger.kernel.org
Fixes: a220871be66f ("virtio-net: correctly enable multiqueue")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nla_for_each_nested parsing in function mqprio_parse_nlattr() does
not check the length of the nested attribute. This can lead to an
out-of-attribute read and allow a malformed nlattr (e.g., length 0) to
be viewed as 8 byte integer and passed to priv->max_rate/min_rate.
This patch adds the check based on nla_len() when check the nla_type(),
which ensures that the length of these two attribute must equals
sizeof(u64).
Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio")
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230725024227.426561-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LTP sendfile07 [1], which expects sendfile() to return EAGAIN when
transferring data from regular file to a "full" O_NONBLOCK socket,
started failing after commit 2dc334f1a63a ("splice, net: Use
sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()").
sendfile() no longer immediately returns, but now blocks.
Removed sock_sendpage() handled this case by setting a MSG_DONTWAIT
flag, fix new splice_to_socket() to do the same for O_NONBLOCK sockets.
[1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/sendfile/sendfile07.c
Fixes: 2dc334f1a63a ("splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()")
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/023c0e21e595e00b93903a813bc0bfb9a5d7e368.1690219914.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the clarification [1] in the latest napi.rst, the tx
processing cannot call any XDP (or page pool) APIs if the "budget"
is 0. Because NAPI is called with the budget of 0 (such as netpoll)
indicates we may be in an IRQ context, however, we cannot use the
page pool from IRQ context.
[1] https://lore.kernel.org/all/20230720161323.2025379-1-kuba@kernel.org/
Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230725074148.2936402-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mat Martineau says:
====================
mptcp: More fixes for 6.5
Patch 1: Better detection of ip6tables vs ip6tables-legacy tools for
self tests. Fix for 6.4 and newer.
Patch 2: Only generate "new listener" event if listen operation
succeeds. Fix for 6.2 and newer.
====================
Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-0-6f60fe7137a9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
