IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Starting with MTL, the driver needs to not only protect the steering
control register from simultaneous software accesses, but also protect
against races with hardware/firmware agents. The hardware provides a
dedicated locking mechanism to support this via the MTL_STEER_SEMAPHORE
register. Reading the register acts as a 'trylock' operation; the read
will return 0x1 if the lock is acquired or 0x0 if something else is
already holding the lock; once acquired, writing 0x1 to the register
will release the lock.
We'll continue to grab the software lock as well, just so lockdep can
track our locking; assuming the hardware lock is behaving properly,
there should never be any contention on the software lock in this case.
v2:
- Extend hardware semaphore timeout and add a taint for CI if it ever
happens (this would imply misbehaving hardware/firmware). (Mika)
- Add "MTL_" prefix to new steering semaphore register. (Mika)
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128233014.4000136-5-matthew.d.roper@intel.com
PPAT setup involves a series of multicast writes. This can be optimized
slightly be acquiring forcewake and the steering lock just once for the
entire sequence.
v2:
- We should use FW_REG_WRITE instead of FW_REG_READ. (Bala)
Suggested-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130155852.19601-1-matthew.d.roper@intel.com
As per the performance tuning guide, set the HOSTCACHEEN bit to
implement the recommended caching policy on PVC.
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130170723.2460014-1-wayne.boyer@intel.com
The GuC firmware includes an extra version number to specify the
submission API level. So use that rather than the main firmware
version number for submission related checks.
Also, while it is guaranteed that GuC version number components are
only 8-bits in size, other firmwares do not have that restriction. So
stop making assumptions about them generically fitting in a u16
individually, or in a u32 as a combined 8.8.8.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129232031.3401386-4-John.C.Harrison@Intel.com
As a precursor to a coming change (for adding a GuC submission API
version), abstract the UC version number into its own private
structure separate to the firmware filename.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129232031.3401386-3-John.C.Harrison@Intel.com
The way delimiters (underscores and dots) were added to the UC
filenames was different for different types of delimiter. Rationalise
them to all be done the same way - implicitly in the concatenation
macro rather than explicitly in the file name prefix.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129232031.3401386-2-John.C.Harrison@Intel.com
We've been overloading uncore->lock to protect access to the MCR
steering register. That's not really what uncore->lock is intended for,
and it would be better if we didn't need to hold such a high-traffic
spinlock for the whole sequence of (apply steering, access MCR register,
restore steering). Let's create a dedicated MCR lock to protect the
steering control register over this critical section and stop relying on
the high-traffic uncore->lock.
For now the new lock is a software lock. However some platforms (MTL
and beyond) have a hardware-provided locking mechanism that can be used
to serialize not only software accesses, but also hardware/firmware
accesses as well; support for that hardware level lock will be added in
a future patch.
v2:
- Use irqsave/irqrestore spinlock calls; platforms using execlist
submission rather than GuC submission can perform MCR accesses in
interrupt context because reset -> errordump happens in a tasklet.
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128233014.4000136-4-matthew.d.roper@intel.com
Passing the GT rather than uncore to the lowest level MCR read and write
functions will make it easier to introduce dedicated MCR locking in a
following patch.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128233014.4000136-3-matthew.d.roper@intel.com
The kerneldoc function name was not updated when this function was
converted to a non-fw form.
Fixes: 192bb40f030a ("drm/i915/gt: Manage uncore->lock while waiting on MCR register")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128233014.4000136-2-matthew.d.roper@intel.com
The fence is only tracking if the HuC load is in progress or not and
doesn't distinguish between already loaded, not supported or disabled,
so we can always initialize it to completed, no matter the actual
support. We already do that for most platforms, but we skip it on
GTs that lack VCS engines (e.g. MTL root GT), so fix that. Note that the
cleanup is already unconditional.
While at it, move the init/fini to helper functions.
Fixes: 02224691cb0f ("drm/i915/huc: fix leak of debug object in huc load fence on driver unload")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123235417.1475709-1-daniele.ceraolospurio@intel.com
On XE_LPM+ platforms the media engines are carved out into a separate
GT but have a common GGTMMADR address range which essentially makes
the GGTT address space to be shared between media and render GT. As a
result any updates in GGTT shall invalidate TLB of GTs sharing it and
similarly any operation on GGTT requiring an action on a GT will have to
involve all GTs sharing it. setup_private_pat was being done on a per
GGTT based as that doesn't touch any GGTT structures moved it to per GT
based.
BSPEC: 63834
v2:
1. Add details to commit msg
2. includes fix for failure to add item to ggtt->gt_list, as suggested
by Lucas
3. as ggtt_flush() is used only for ggtt drop i915_is_ggtt check within
it.
4. setup_private_pat moved out of intel_gt_tiles_init
v3:
1. Move out for_each_gt from i915_driver.c (Jani Nikula)
v4: drop using RCU primitives on ggtt->gt_list as it is not an RCU list
(Matt Roper)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122070126.4813-1-aravind.iddamsetty@intel.com
Wa_18018764978 applies to specific steppings of DG2 (G10 C0+,
G11 and G12 A0+). Clean up style in function at the same time.
Bspec: 66622
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123183648.407058-1-matthew.s.atwood@intel.com
Users of intel_gt_retire_requests_timeout() expect 0 return value on
success. However, we have no protection from passing back 0 potentially
returned by a call to dma_fence_wait_timeout() when it succedes right
after its timeout has expired.
Replace 0 with -ETIME before potentially using the timeout value as return
code, so -ETIME is returned if there are still some requests not retired
after timeout, 0 otherwise.
v3: Use conditional expression, more compact but also better reflecting
intention standing behind the change.
v2: Move the added lines down so flush_submission() is not affected.
Fixes: f33a8a51602c ("drm/i915: Merge wait_for_timelines with retire_request")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-3-janusz.krzysztofik@linux.intel.com
Commit b97060a99b01 ("drm/i915/guc: Update intel_gt_wait_for_idle to work
with GuC") extended the API of intel_gt_retire_requests_timeout() with an
extra argument 'remaining_timeout', intended for passing back unconsumed
portion of requested timeout when 0 (success) is returned. However, when
request retirement happens to succeed despite an error returned by a call
to dma_fence_wait_timeout(), that error code (a negative value) is passed
back instead of remaining time. If we then pass that negative value
forward as requested timeout to intel_uc_wait_for_idle(), an explicit BUG
will be triggered.
If request retirement succeeds but an error code is passed back via
remaininig_timeout, we may have no clue on how much of the initial timeout
might have been left for spending it on waiting for GuC to become idle.
OTOH, since all pending requests have been successfully retired, that
error code has been already ignored by intel_gt_retire_requests_timeout(),
then we shouldn't fail.
Assume no more time has been left on error and pass 0 timeout value to
intel_uc_wait_for_idle() to give it a chance to return success if GuC is
already idle.
v3: Don't fail on any error passed back via remaining_timeout.
v2: Fix the issue on the caller side, not the provider.
Fixes: b97060a99b01 ("drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-2-janusz.krzysztofik@linux.intel.com
It was noticed that the table order verification step was only being
run once rather than once per firmware type. Fix that.
Note that the long term plan is to convert this code to be a mock
selftest. It is already only compiled in when selftests are enabled.
And the work involved in the conversion was estimated to be
non-trivial. So that conversion is currently low on the priority list.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122233328.854217-1-John.C.Harrison@Intel.com
The fence is always initialized in huc_init_early, but the cleanup in
huc_fini is only being run if HuC is enabled. This causes a leaking of
the debug object when HuC is disabled/not supported, which can in turn
trigger a warning if we try to register a new debug offset at the same
address on driver reload.
To fix the issue, make sure to always run the cleanup code.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reported-by: Brian Norris <briannorris@chromium.org>
Fixes: 27536e03271d ("drm/i915/huc: track delayed HuC load with a fence")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111005651.4160369-1-daniele.ceraolospurio@intel.com
The default_lists array should be in rodata.
Fixes: dce2bd542337 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122141616.3469214-1-jani.nikula@intel.com
For multi-tile setups the GSC operational only on the tile 0.
Skip GSC auxiliary device creation for all other tiles
in GSC device init code.
Initialize basic GSC fields and use the same path
as HECI1 (HECI_PXP) device disable.
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121092449.328674-1-alexander.usyskin@intel.com
Engine busyness samples around a 10ms period is failing with busyness
ranging approx. from 87% to 115% as shown below. The expected range is
+/- 5% of the sample period. Fail 10% of the time.
rcs0: reported 11716042ns [91%] busyness while spinning [for 12805719ns]
When determining busyness of active engine, the GuC based engine
busyness implementation relies on a 64 bit timestamp register read. The
latency incurred by this register read causes the failure.
On DG1, when the test fails, the observed latencies range from 900us -
1.5ms.
Optimizing the 2x32 read by acquiring the lock and forcewake prior to
all reg reads reduces the rate of failure to around 2%, but does not
eliminate it.
In order to make the selftest more robust and always account for such
latencies, increase the sample period to 100 ms. This eliminates the
issue as seen in a 1000 runs.
v2: (Ashutosh)
- Add error to commit msg
- Include gitlab bug
- Update commit for inclusion of 2x32 optimized read
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4418
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110171913.670286-3-umesh.nerlige.ramappa@intel.com
PMU reads the GT timestamp as a 2x32 mmio read and since upper and lower
32 bit registers are read in a loop, there is a latency involved between
getting the GT timestamp and the CPU timestamp. As part of the
resolution, refactor intel_uncore_read64_2x32 to acquire forcewake and
uncore lock prior to reading upper and lower regs.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110171913.670286-2-umesh.nerlige.ramappa@intel.com
In 3653727560d0 ("drm/i915: Simplify internal helper function signature")
I broke the old platforms by not noticing engine workaround init does not
initialize the list on old platforms. Fix it by always initializing which
already does the right thing by mostly not doing anything if there aren't
any workarounds on the list.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 3653727560d0 ("drm/i915: Simplify internal helper function signature")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118115249.2683946-1-tvrtko.ursulin@linux.intel.com
The GT MCR code currently relies on uncore->lock to avoid race
conditions on the steering control register during MCR operations. The
*_fw() versions of MCR operations expect the caller to already hold
uncore->lock, while the non-fw variants manage the lock internally.
However the sole callsite of intel_gt_mcr_wait_for_reg_fw() does not
currently obtain the forcewake lock, allowing a potential race condition
(and triggering an assertion on lockdep builds). Furthermore, since
'wait for register value' requests may not return immediately, it is
undesirable to hold a fundamental lock like uncore->lock for the entire
wait and block all other MMIO for the duration; rather the lock is only
needed around the MCR read operations and can be released during the
delays.
Convert intel_gt_mcr_wait_for_reg_fw() to a non-fw variant that will
manage uncore->lock internally. This does have the side effect of
causing an unnecessary lookup in the forcewake table on each read
operation, but since the caller is still holding the relevant forcewake
domain, this will ultimately just incremenent the reference count and
won't actually cause any additional MMIO traffic.
In the future we plan to switch to a dedicated MCR lock to protect the
steering critical section rather than using the overloaded and
high-traffic uncore->lock; on MTL and beyond the new lock can be
implemented on top of the hardware-provided synchonization mechanism for
steering.
Fixes: 3068bec83eea ("drm/i915/gt: Add intel_gt_mcr_wait_for_reg_fw()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117173358.1980230-1-matthew.d.roper@intel.com
Add support for C6 residency and C state type for MTL SAMedia. Also add
mtl_drpc.
v2: Fixed review comments (Ashutosh)
v3: Sort registers and fix whitespace errors in intel_gt_regs.h (Matt R)
Remove MTL_CC_SHIFT (Ashutosh)
Adapt to RC6 residency register code refactor (Jani N)
v4: Move MTL branch to top in drpc_show
v5: Use FORCEWAKE_MT identical to gen6_drpc (Ashutosh)
v6: Add MISSING_CASE for gt_core_status switch statement (Rodrigo)
Change state name for MTL_CC0 to C0 (from "on") (Rodrigo)
v7: Change state name for MTL_CC0 to RC0 (Rodrigo)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114123348.3474216-6-badal.nilawar@intel.com
Previously RC6 residency functions directly accepted RC6 residency register
MMIO offsets (there are four RC6 residency registers). This worked but
required an assumption on the residency register layout so was not future
proof.
Therefore change RC6 residency functions to accept RC6 residency types
instead of register MMIO offsets. The knowledge of register offsets as well
as ID to offset mapping is now maintained solely in intel_rc6 and can be
tailored for different platforms and different register layouts as need
arises.
v2: Address review comments by Jani N
- Change residency functions to accept RC6 residency types instead of
register ID's
- s/intel_rc6_print_rc5_res/intel_rc6_print_residency/
- Remove "const enum" in function arguments
- Naming: intel_rc6_* for enum
- Use INTEL_RC6_RES_MAX and other minor changes
v3: Don't include intel_rc6_types.h in intel_rc6.h (Jani)
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114123348.3474216-5-badal.nilawar@intel.com
Update CAGF functions for MTL to get actual resolved frequency of 3D and
SAMedia.
v2: Update MTL_MIRROR_TARGET_WP1 position/formatting (MattR)
Move MTL branches in cagf functions to top (MattR)
Fix commit message (Andi)
v3: Added comment about registers not needing forcewake for Gen12+ and
returning 0 freq in RC6
v4: Use REG_FIELD_GET and uncore (Rodrigo)
Bspec: 66300
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114123348.3474216-4-badal.nilawar@intel.com
On GEN12+ use GEN12_RPSTAT register to get actual resolved GT
freq. GEN12_RPSTAT does not require a forcewake and will return 0 freq if
GT is in RC6.
v2:
- Fixed review comments(Ashutosh)
- Added function intel_rps_read_rpstat_fw to read RPSTAT without
forcewake, required especially for GEN6_RPSTAT1 (Ashutosh, Tvrtko)
v3:
- Updated commit title and message for more clarity (Ashutosh)
- Replaced intel_rps_read_rpstat with direct read to GEN12_RPSTAT1 in
read_cagf (Ashutosh)
v4: Remove GEN12_CAGF_SHIFT and use REG_FIELD_GET (Rodrigo)
Cc: Don Hiatt <donhiatt@gmail.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114123348.3474216-3-badal.nilawar@intel.com
Instead of masks/shifts settle on REG_FIELD_GET as the standard way to
extract reg fields. This allows future patches touching this code to also
consistently use REG_FIELD_GET and friends.
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114123348.3474216-2-badal.nilawar@intel.com
Previously, we only used PXP FW interface version-42 structures for
PXP arbitration session on ADL/TGL products and version-43 for HuC
authentication on DG2. That worked fine despite not differentiating such
versioning of the PXP firmware interaction structures. This was okay
back then because the only commands used via version 42 was not
used via version 43 and vice versa.
With MTL, we'll need both these versions side by side for the same
commands (PXP-session) with the older platform feature support. That
said, let's create separate files to define the structures and definitions
for both version-42 and 43 of PXP FW interfaces.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108045628.4187260-2-alan.previn.teres.alexis@intel.com
In i915_gem_madvise_ioctl() we immediately purge the object is not
currently used, like when the mm.pages are NULL. With shmem the pages
might still be hanging around or are perhaps swapped out. Similarly with
ttm we might still have the pages hanging around on the ttm resource,
like with lmem or shmem, but here we need to be extra careful since
async unbinds are possible as well as in-progress kernel moves. In
i915_ttm_purge() we expect the pipeline-gutting to nuke the ttm resource
for us, however if it's busy the memory is only moved to a ghost object,
which then leads to broken behaviour when for example clearing the
i915_tt->filp, since the actual ttm_tt is still alive and populated,
even though it's been moved to the ghost object. When we later destroy
the ghost object we hit the following, since the filp is now NULL:
[ +0.006982] #PF: supervisor read access in kernel mode
[ +0.005149] #PF: error_code(0x0000) - not-present page
[ +0.005147] PGD 11631d067 P4D 11631d067 PUD 115972067 PMD 0
[ +0.005676] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.012962] Workqueue: events ttm_device_delayed_workqueue [ttm]
[ +0.006022] RIP: 0010:i915_ttm_tt_unpopulate+0x3a/0x70 [i915]
[ +0.005879] Code: 89 fb 48 85 f6 74 11 8b 55 4c 48 8b 7d 30 45 31 c0 31 c9 e8 18 6a e5 e0 80 7d 60 00 74 20 48 8b 45 68
8b 55 08 4c 89 e7 5b 5d <48> 8b 40 20 83 e2 01 41 5c 89 d1 48 8b 70
30 e9 42 b2 ff ff 4c 89
[ +0.018782] RSP: 0000:ffffc9000bf6fd70 EFLAGS: 00010202
[ +0.005244] RAX: 0000000000000000 RBX: ffff8883e12ae380 RCX: 0000000000000000
[ +0.007150] RDX: 000000008000000e RSI: ffffffff823559b4 RDI: ffff8883e12ae3c0
[ +0.007142] RBP: ffff888103b65d48 R08: 0000000000000001 R09: 0000000000000001
[ +0.007144] R10: 0000000000000001 R11: ffff88829c2c8040 R12: ffff8883e12ae3c0
[ +0.007148] R13: 0000000000000001 R14: ffff888115184140 R15: ffff888115184248
[ +0.007154] FS: 0000000000000000(0000) GS:ffff88844db00000(0000) knlGS:0000000000000000
[ +0.008108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.005763] CR2: 0000000000000020 CR3: 000000013fdb4004 CR4: 00000000003706e0
[ +0.007152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ +0.007145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ +0.007154] Call Trace:
[ +0.002459] <TASK>
[ +0.002126] ttm_tt_unpopulate.part.0+0x17/0x70 [ttm]
[ +0.005068] ttm_bo_tt_destroy+0x1c/0x50 [ttm]
[ +0.004464] ttm_bo_cleanup_memtype_use+0x25/0x40 [ttm]
[ +0.005244] ttm_bo_cleanup_refs+0x90/0x2c0 [ttm]
[ +0.004721] ttm_bo_delayed_delete+0x235/0x250 [ttm]
[ +0.004981] ttm_device_delayed_workqueue+0x13/0x40 [ttm]
[ +0.005422] process_one_work+0x248/0x560
[ +0.004028] worker_thread+0x4b/0x390
[ +0.003682] ? process_one_work+0x560/0x560
[ +0.004199] kthread+0xeb/0x120
[ +0.003163] ? kthread_complete_and_exit+0x20/0x20
[ +0.004815] ret_from_fork+0x1f/0x30
v2:
- Just use ttm_bo_wait() directly (Niranjana)
- Add testcase reference
Testcase: igt@gem_madvise@dontneed-evict-race
Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Nirmoy Das <Nirmoy.Das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115104620.120432-1-matthew.auld@intel.com
vm_fault_ttm() should not expect ttm ghost obj so remove that check.
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024144558.27747-1-nirmoy.das@intel.com
All calls to i915_vma_move_to_active are surrounded by vma lock
and/or there are multiple local helpers for it in particular tests.
Let's replace it by common helper.
The patch should not introduce functional changes.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019215906.295296-3-andrzej.hajda@intel.com
Since almost all calls to i915_vma_move_to_active are prepended with
i915_request_await_object, let's call the latter from
_i915_vma_move_to_active by default and add flag allowing bypassing it.
Adjust all callers accordingly.
The patch should not introduce functional changes.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019215906.295296-2-andrzej.hajda@intel.com
There were several updates in the driver on how the workarounds are
handled since its documentation was written. Update the documentation to
reflect the current reality.
v2:
- Remove footnote that was wrongly referenced, adding back the
reference in the correct paragraph.
- Remove "Display workarounds" and just mention "display IP" under
"Other" category since all of them are peppered around the driver.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> # v1
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115192611.179981-1-lucas.demarchi@intel.com
Add a missing colon which I accidentally removed in the recent logging
changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a10234fda466 ("drm/i915: Partial abandonment of legacy DRM logging macros")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115101730.394880-1-tvrtko.ursulin@linux.intel.com
The render and media GuCs share the same interrupt enable register, so
we can no longer disable interrupts when we disable communication for
one of the GuCs as this would impact the other GuC. Instead, we keep the
interrupts always enabled in HW and use a variable in the GuC structure
to determine if we want to service the received interrupts or not.
v2: use MTL_ prefix for reg definition (Matt)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-7-daniele.ceraolospurio@intel.com
The media GT shares the G-unit with the root GT, so a second set of
communication registers is required for the media GuC.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-6-daniele.ceraolospurio@intel.com
With MTL standalone media architecture the wopcm layout has changed,
with separate partitioning in WOPCM for the root GT GuC and the media
GT GuC. The size of WOPCM is 4MB with the lower 2MB reserved for the
media GT and the upper 2MB for the root GT.
Given that MTL has GuC deprivilege, the WOPCM registers are pre-locked
by the bios. Therefore, we can skip all the math for the partitioning
and just limit ourselves to sanity-checking the values.
v2: fix makefile file ordering (Jani)
v3: drop XELPM_SAMEDIA_WOPCM_SIZE, check huc instead of VDBOX (John)
v4: further clarify commit message, remove blank line (John)
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-5-daniele.ceraolospurio@intel.com
MTL supports GuC deprivilege. Add the feature flag to this platform.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-4-daniele.ceraolospurio@intel.com
Our current FW loading process is the same for all FWs:
- Pin FW to GGTT at the start of the ggtt->uc_fw node
- Load the FW
- Unpin
This worked because we didn't have a case where 2 FWs would be loaded on
the same GGTT at the same time. On MTL, however, this can happen if both
GTs are reset at the same time, so we can't pin everything in the same
spot and we need to use separate offset. For simplicity, instead of
calculating the exact required size, we reserve a 2MB slot for each fw.
v2: fail fetch if FW is > 2MBs, improve comments (John)
v3: more comment improvements (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-3-daniele.ceraolospurio@intel.com
The FW binaries are independently loaded on each GT. On MTL, the memory
is shared so we could potentially re-use a single allocation, but on
discrete multi-gt platforms we are going to need independent copies,
so it is easier to do the same on MTL as well, given that the amount
of duplicated memory is relatively small (~500K).
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-2-daniele.ceraolospurio@intel.com
On MTL the primary GT doesn't have any media capabilities, so no video
engines and no HuC. We must therefore skip the HuC fetch and load on
that specific case. Given that other multi-GT platforms might have HuC
on the primary GT, we can't just check for that and it is easier to
instead check for the lack of VCS engines.
Based on code from Aravind Iddamsetty
v2: clarify which engine_mask is used for each GT and why (Tvrtko)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-1-daniele.ceraolospurio@intel.com
This workaround is added for Media tile of MTL A step. It is to help
pcode workaround which handles the hardware issue seen during package C2/C3
transitions due to RC6 entry/exit transitions on Media tile. As a part of
workaround pcode expect kmd to send mailbox message "media busy" when
components of Media tile are in use and "media idle" otherwise.
As per workaround description gucrc need to be disabled so enabled
host based RC for Media tile.
v2:
- Correct workaround id (Matt)
- Fix review comments (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103184559.2306481-1-badal.nilawar@intel.com
Run a workload on tiles simultaneously by requesting for RP0 frequency.
Pcode can however limit the frequency being granted due to throttling
reasons. This test checks if there is any throttling but does not fail
if RP0 is not granted due to throttle reasons
v2: Fix build error
v3: Use IS_ERR_OR_NULL to check worker
Addressed cosmetic review comments (Tvrtko)
v4: do not skip test on media engines if gt type is GT_MEDIA.
Use correct PERF_LIMIT_REASONS register for MTL (Vinay)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109112541.275021-2-riana.tauro@intel.com
Convert some usages of legacy DRM logging macros into versions which tell
us on which device have the events occurred.
v2:
* Don't have struct drm_device as local. (Jani, Ville)
v3:
* Store gt, not i915, in workaround list. (John)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109104633.2579245-1-tvrtko.ursulin@linux.intel.com
