IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently we call .hpd_irq_setup() directly just before display
resume, and follow it with another call via intel_hpd_init()
just afterwards. Assuming the hpd pins are marked as enabled
during the open-coded call these two things do exactly the
same thing (ie. enable HPD interrupts). Which even makes sense
since we definitely need working HPD interrupts for MST sideband
during the display resume.
So let's nuke the open-coded call and move the intel_hpd_init()
call earlier. However we need to leave the poll_init_work stuff
behind after the display resume as that will trigger display
detection while we're resuming. We don't want that trampling over
the display resume process. To make this a bit more symmetric
we turn this into a intel_hpd_poll_{enable,disable}() pair.
So we end up with the following transformation:
intel_hpd_poll_init() -> intel_hpd_poll_enable()
lone intel_hpd_init() -> intel_hpd_init()+intel_hpd_poll_disable()
.hpd_irq_setup()+resume+intel_hpd_init() -> intel_hpd_init()+resume+intel_hpd_poll_disable()
If we really would like to prevent all *long* HPD processing during
display resume we'd need some kind of software mechanism to simply
ignore all long HPDs. Currently we appear to have that just for
fbdev via ifbdev->hpd_suspended. Since we aren't exploding left and
right all the time I guess that's mostly sufficient.
For a bit of history on this, we first got a mechanism to block
hotplug processing during suspend in commit 15239099d7a7 ("drm/i915:
enable irqs earlier when resuming") on account of moving the irq enable
earlier. This then got removed in commit 50c3dc970a09 ("drm/fb-helper:
Fix hpd vs. initial config races") because the fdev initial config
got pushed to a later point. The second ad-hoc hpd_irq_setup() for
resume was added in commit 0e32b39ceed6 ("drm/i915: add DP 1.2 MST
support (v0.7)") to be able to do MST sideband during the resume.
And finally we got a partial resurrection of the hpd blocking
mechanism in commit e8a8fedd57fd ("drm/i915: Block fbdev HPD
processing during suspend"), but this time it only prevent fbdev
from handling hpd while resuming.
v2: Leave the poll_init_work behind
v3: Remove the extra intel_hpd_poll_disable() from display reset (Lyude)
Add the missing intel_hpd_poll_disable() to display init (Imre)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013181137.30560-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
This sequence is not part of "Sequences to Initialize Display" but
as noted in the MBus page the DBUF_CTL.Tracker_state_service needs
to be set to 8.
BSpec: 49213
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019173906.18892-1-jose.souza@intel.com
DC6 is not supported on DG1, so change the allowed DC mask for DG1.
This is not yet on bspec, but it has been confirmed by HW engineers.
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-9-lucas.demarchi@intel.com
DG1 shares some workarounds with TGL and RKL and also has some
additional workarounds of its own.
v2: Correct location of Wa_1408615072 (JohnH).
v3: Apply WAs 1606700617, 18011464164 and 22010931296 to DG1 (José)
v4 (Anusha)
- Add Wa_22010271021
- s/Wa_14010096844/Wa_1409836686
v5:
- Extend Wa_14010919138 to all revs (Matt Atwood)
- Power gate media is global gen12 design. (Rodrigo)
- Rebase (Lucas)
v6: use REG_BIT() to fix checkpatch warning (Lucas)
BSpec: 53508
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-8-lucas.demarchi@intel.com
TGL power wells can be re-used for DG1 with the exception of the fake
power well for TC_COLD.
v2: use logic to skip power wells while copying instead of duplicating
the definition of TGL power wells (Matt Roper)
Bspec: 49182
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-3-lucas.demarchi@intel.com
The skus guarded by IS_CNL_WITH_PORT_F() have port F and thus they need
those power wells. The others don't have those. Up to now we were
just overriding the number of power wells on !IS_CNL_WITH_PORT_F(),
relying on those power wells to be the last ones. Now that we have logic
in place to skip power wells by id, use it instead.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-2-lucas.demarchi@intel.com
This allows us to skip power wells on a platform allowing it to re-use
the table from another one instead of having to create a new table from
scratch that is basically a copy with a few removals.
Cc: Imre Deak <imre.deak@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
[ Adapt ignore logic to be based on pw id rather than adding a new
field, as suggested by Imre ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-1-lucas.demarchi@intel.com
TGL made stepping a litte mess, workarounds refer to the stepping of
the IP(GT or Display) not of the GPU stepping so it would already
require the same solution as used in commit 96c5a15f9f39
("drm/i915/kbl: Fix revision ID checks").
But to make things even more messy it have a different IP stepping
mapping between SKUs and the same stepping revision of GT do not match
the same HW between TGL U/Y and regular TGL.
So it was required to have 2 different macros to check GT WAs while
for Display we are able to use just one macro that uses the right
revids table.
All TGL workarounds checked and updated accordingly.
v2:
- removed TODO to check if WA 14010919138 applies to regular TGL.
- fixed display stepping in regular TGL (Anusha)
BSpec: 52890
BSpec: 55378
BSpec: 44455
Reviewed-by: Anusha Srivatsa <anusha.srivtsa@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Penne Lee <penne.y.lee@intel.com>
Cc: Guangyao Bai <guangyao.bai@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827233943.400946-1-jose.souza@intel.com
The command register is the PCODE MBOX low register not the high one as
described by the spec. This left the system with the TC-cold power state
being blocked all the time. Fix things by using the correct register.
Also to make sure we retry a request for at least 600usec, when the
PCODE MBOX command itself succeeded, but the TC-cold block command
failed, sleep for 1msec unconditionally after any fail.
The change was tested with JTAG register read of the HW/FW's actual
TC-cold state, which reported the expected states after this change.
Tested-by: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805150056.24248-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.
Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.
Fixes: 3c02934b24e3 ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A recent bspec update removed the LPDDR4 single channel entry from the
buddy register table, but added a new four-channel entry.
Workaround 1409767108 hasn't been updated with any guidance for four
channel configurations, so we leave that alternate table unchanged for
now.
Bspec 49218
Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although the WA description targets the platforms it is a workaround
for the affected PCHs, that is why it is being checked.
v2: excluding DG1 fake PCH from WA
BSpec: 52890
BSpec: 53273
BSpec: 52888
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727164729.28836-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have a mix of dport, intel_dport, intel_dig_port and dig_port to
reference a intel_digital_port struct. Numbers are around
5 intel_dport
36 dport
479 intel_dig_port
352 dig_port
Since we already removed the intel_ prefix from most of our other
structs, do the same here and prefer dig_port.
v2: rename everything in i915, not just a few display sources and
reword commit message (from Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com
Start using device specific parameters instead of module parameters for
most things. The module parameters become the immutable initial values
for i915 parameters. The device specific parameters in i915->params
start life as a copy of i915_modparams. Any later changes are only
reflected in the debugfs.
The stragglers are:
* i915.force_probe and i915.modeset. Needed before dev_priv is
available. This is fine because the parameters are read-only and never
modified.
* i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and
I915_STATE_WARN_ON would result in massive and ugly churn. This is
handled by not exposing the parameter via debugfs, and leaving the
parameter writable in sysfs. This may be fixed up in follow-up work.
* i915.inject_probe_failure. Only makes sense in terms of the module,
not the device. This is handled by not exposing the parameter via
debugfs.
v2: Fix uc i915 lookup code (Michał Winiarski)
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com
Rocket Lake uses the same 'abox0' mechanism to handle pixel data
transfers from memory that gen11 platforms used, rather than the
abox1/abox2 interfaces used by TGL/DG1. For the most part this is a
hardware implementation detail that's transparent to driver software,
but we do have to program a couple of tuning registers (MBUS_ABOX_CTL
and BW_BUDDY registers) according to which ABOX instances are used by a
platform. Let's track the platform's ABOX usage in the device info
structure and use that to determine which instances of these registers
to program.
As an exception to this rule is that even though TGL/DG1 use ABOX1+ABOX2
for data transfers, we're still directed to program the ABOX_CTL
register for ABOX0; so we'll handle that as a special case.
v2:
- Store the mask of platform-specific abox registers in the device
info structure.
- Add a TLB_REQ_TIMER() helper macro. (Aditya)
v3:
- Squash ABOX and BW_BUDDY patches together and use a single mask for
both of them, plus a special-case for programming the ABOX0 instance
on all gen12. (Ville)
Bspec: 50096
Bspec: 49218
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200606025740.3308880-2-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
RKL power wells are similar to TGL power wells, but have some important
differences:
* PG1 now has pipe A's VDSC (rather than sticking it in PG2)
* PG2 no longer exists
* DDI-C (aka TC-1) moves from PG1 -> PG3
* PG5 no longer exists due to the lack of a fourth pipe
Also note that what we refer to as 'DDI-C' and 'DDI-D' need to actually
be programmed as TC-1 and TC-2 even though this platform doesn't have TC
outputs.
Bspec: 49234
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-9-matthew.d.roper@intel.com
struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.
Prefer drm_WARN_ON over WARN_ON at places where struct i915_power_domains
struct is available.
Conversion is done with below sementic patch:
@@
identifier func, T;
@@
func(struct i915_power_domains *T,...) {
+ struct drm_i915_private *i915 = container_of(T, struct drm_i915_private, power_domains);
<+...
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
...+>
}
changes since v1:
- Fix commit subject (Jani)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-2-pankaj.laxminarayan.bharadiya@intel.com
Add a global state to track the dbuf slices. Gets rid of all the nasty
coupling between state->modeset and dbuf recomputation. Also we can now
totally nuke state->active_pipe_changes.
dev_priv->wm.distrust_bios_wm still remains, but that too will get
nuked soon.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The low level dbuf slice code is rather inconsitent with its
functiona naming and organization. Make it more consistent.
Also share the enable/disable functions between all platforms
since the same code works just fine for all of them.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Polish some of the dbuf code to give more meaningful debug
messages and whatnot. Also we can switch over to the per-device
debugs/warns at the same time.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fix the check for when an AUX power well enabling timeout is expected on
a legacy TypeC port.
Fixes: 89e01caac641 ("drm/i915: Use single set of AUX powerwell ops for gen11+")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422123440.19522-1-imre.deak@intel.com
Remove a number of inlines from .c files, and let the compiler decide
what's best. There's more to do, but need to start somewhere, and need
to start setting the example.
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420140438.14672-2-jani.nikula@intel.com
AUX power wells sometimes need additional handling besides just
programming the specific power well registers:
* Type-C PHY's also require additional Type-C register programming
* ICL combo PHY's require additional workarounds
* TGL & EHL combo PHY's can be treated like any other power well
Today we have dedicated aux ops for the ICL combo PHY and Type-C cases.
This works fine, but means that when a new platform shows up with
identical general power well handling, but different types of PHYs on
its outputs, we have to define an entire new power well table for that
platform and can't just re-use the table from the earlier platform -- as
an example, see ehl_power_wells[], which is a subset of
icl_power_wells[], *except* that we need to specify different AUX ops
for the third display.
If we instead create a single set of top-level aux ops that will check
the PHY type and then dispatch to the appropriate handlers, we can get
more reuse out of our power well definitions. This allows us to
immediately eliminate ehl_power_wells[] and simply reuse the ICL table;
if future platforms follow the same general power well assignments as
either ICL or TGL, we'll be able to re-use those tables in the same way.
Note that I've only changed ICL+ platforms over to using the new icl_aux
ops; at this point it's unlikely that we'll have any new platforms that
re-use gen9 or earlier power well configurations.
v2:
- ICL_AUX_PW_TO_PHY() won't return the proper PHY for TBT AUX power
wells. But we know those wells will only used on Type-C outputs
anyway, so we can just check is is_tc_tbt flag in the condition.
(Jose).
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-2-matthew.d.roper@intel.com
This is a expected timeout of static TC ports not conneceted, so
not throwing warnings that would taint CI.
v3:
- moved checks to tc_phy_aux_timeout_expected()
v4:
- moved and add comments to tc_phy_aux_timeout_expected()
v5:
- only checking tc_legacy_port for TC ports
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-8-jose.souza@intel.com
TC ports can enter in TCCOLD to save power and is required to request
to PCODE to exit this state before use or read to TC registers.
For TGL there is a new MBOX command to do that with a parameter to ask
PCODE to exit and block TCCOLD entry or unblock TCCOLD entry.
So adding a new power domain to reuse the refcount and only allow
TC cold when all TC ports are not in use.
v2:
- fixed missing case in intel_display_power_domain_str()
- moved tgl_tc_cold_request to intel_display_power.c
- renamed TGL_TC_COLD_OFF to TGL_TC_COLD_OFF_POWER_DOMAINS
- added all TC and TBT aux power domains to
TGL_TC_COLD_OFF_POWER_DOMAINS
v3:
- added one msec sleep when PCODE returns -EAGAIN
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
v4:
- Made failure to block or unblock TC cold a error
- removed 5msec timeout, instead giving PCODE 1msec by up 3 times to
recover from the internal error
v5:
- only sleeping 1msec when ret is -EAGAIN
BSpec: 49294
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-6-jose.souza@intel.com
As part of ICL TC cold exit sequences we need to request aux power
well before lock the access to TC ports, so skiping the
intel_tc_port_ref_held() check for TC legacy ports.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-5-jose.souza@intel.com
This is required for legacy/static TC ports as IOM is not aware of
the connection and will not trigger the TC cold exit.
Just request PCODE to exit TCCOLD is not enough as it could enter
again before driver makes use of the port, to prevent it BSpec states
that aux powerwell should be held.
So here embedding the TC cold exit sequence into ICL aux enable,
it will enable aux and then request TC cold to exit.
The TC cold block(exit and aux hold) and unblock was added to some
exported TC functions for the others and to access PHY registers,
callers should enable and keep aux powerwell enabled during access.
Also adding TC cold check and warnig in tc_port_load_fia_params() as
at this point of the driver initialization we can't request power
wells, if we get this warning we will need to figure out how to handle
it.
v2:
- moved ICL TC cold exit function to intel_display_power
- using dig_port->tc_legacy_port to only execute sequences for legacy
ports, hopefully VBTs will have this right
- fixed check to call _hsw_power_well_continue_enable()
- calling _hsw_power_well_continue_enable() unconditionally in
icl_tc_phy_aux_power_well_enable(), if needed we will surpress timeout
warnings of TC legacy ports
- only blocking TC cold around fia access
v3:
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
returning -EAGAIN in in icl_tc_cold_exit()
- removed leftover tc_cold_wakeref
- added one msec sleep when PCODE returns -EAGAIN
v4:
- removed 5msec timeout, instead giving 1msec to whoever is using
PCODE to finish it up to 3 times
- added a comment about turn TC cold exit failure as a error in future
BSpec: 21750
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1296
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-4-jose.souza@intel.com
This is a preparation for ICL TC cold exit sequences.
v2:
- renamed new functions to hsw_power_well_enable_prepare()/complete()
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-3-jose.souza@intel.com
Moving the code to return the digital port of the aux channel also
removing the intel_phy_is_tc() to make it generic.
digital_port will be needed in icl_tc_phy_aux_power_well_enable()
so adding it as a parameter to icl_tc_port_assert_ref_held().
While at at removing the duplicated call to icl_tc_phy_aux_ch() in
icl_tc_port_assert_ref_held().
v2:
- fixed build when DRM_I915_DEBUG_RUNTIME_PM is not set
- moved to before hsw_wait_for_power_well_enable() as it will be
needed by hsw_wait_for_power_well_enable() in a future patch
v4:
- fixed action of if (!dig_port), continue instead of return
Cc: You-Sheng Yang <vicamo@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-1-jose.souza@intel.com
Gen11 onwards PG3 is contains functions for pipe B,
external displays, and VGA. It make sense to add
a power well id with name ICL_DISP_PW_3 rather then
TGL_DISP_PW_3, Also PG3 power well id requires to
know if lpsp is enabled.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-2-anshuman.gupta@intel.com
As on ICL, we want to use the Type-C aux handlers for the TBT aux wells
to ensure the DP_AUX_CH_CTL_TBT_IO flag is set properly.
Fixes: 656409bbaf87 ("drm/i915/tgl: Add power well support")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
On gen12, we no longer need to disable DC5/DC6 when when PG2 is in use
(which translates to cases where we're using VDSC on pipe A).
Bspec: 49193
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220231843.3127468-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We need to explicitly set the TLB Request Timer initial value in the
BW_BUDDY registers to 0x8 rather than relying on the hardware default.
v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct
bits during the rmw. (Jose)
Bspec: 52890
Bspec: 50044
Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
On gen11 we only needed to program MBus credits into MBUS_ABOX_CTL
during display initialization, but on gen12 we're now supposed to
program the same values into MBUS_ABOX1_CTL and MBUS_ABOX2_CTL as well.
v2:
- Program registers with rmw to preserve contents of unrelated bits.
- Switch to the new display uncore helpers.
Bspec: 49213
Bspec: 50096
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-2-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.
Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
TGL BIOS seems to enable both DBuf slices ocasionally, depending
how many displays are connected, while i915 according to BSpec
was powering on S1 DBuf slice, until a modeset was done.
This was causing a brief flash during the boot as we were
disabling slice, previously used by BIOS with that.
To prevent this, now we are ensuring tht we are enabling
_at least_ one slice, but if there are more, let's not
power them off.
Fixes: ff2cd8635e41 ("drm/i915: Correctly map DBUF slices to pipes")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-2-stanislav.lisovskiy@intel.com
Start manipulating DBuf slices as a mask,
but not as a total number, as current approach
doesn't give us full control on all combinations
of slices, which we might need(like enabling S2
only can't enabled by setting enabled_slices=1).
Removed wrong code from intel_get_ddb_size as
it doesn't match to BSpec. For now still just
use DBuf slice until proper algorithm is implemented.
Other minor code refactoring to get prepared
for major DBuf assignment changes landed:
- As now enabled slices contain a mask
we still need some value which should
reflect how much DBuf slices are supported
by the platform, now device info contains
num_supported_dbuf_slices.
- Removed unneeded assertion as we are now
manipulating slices in a more proper way.
v2: Start using enabled_slices in dev_priv
v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
as this now sits in dev_priv independently.
v4: - Fixed debug print formatting to hex(Matt Roper)
- Optimized dbuf slice updates to be used only
if slice union is different from current conf(Matt Roper)
- Fixed some functions to be static(Matt Roper)
- Created a parameterized version for DBUF_CTL to
simplify DBuf programming cycle(Matt Roper)
- Removed unrequred field from GEN10_FEATURES(Matt Roper)
v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
- Started to use parameterized loop for hw readout to get slices
(Ville Syrjälä)
- Added back assertion checking amount of DBUF slices enabled
after DC states 5/6 transition, also added new assertion
as starting from ICL DMC seems to restore the last DBuf
power state set, rather than power up all dbuf slices
as assertion was previously expecting(Ville Syrjälä)
v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä)
- Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled
back, as we really need to have a single unified assert here
however currently enabling always slice 1 is enforced by BSpec,
so we will have to OR enabled slices mask with 1 in order
to be consistent with BSpec, that way we can unify that
assertion and against the actual state from the driver, but
not some hardcoded value.(concluded with Ville)
- Remove parameterized DBUF_CTL version, to extract it to another
patch.(Ville Syrjälä)
v7:
- Removed unneeded hardcoded return value for older gens from
intel_enabled_dbuf_slices_mask - this now is handled in a
unified manner since device info anyway returns max dbuf slices
as 1 for older platforms(Matthew Roper)
- Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead
of intel_dbuf_max_slices function as it is trivial(Matthew Roper)
v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä)
v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä)
- Now using power_domain mutex to protect from race condition, which
can occur because intel_dbuf_slices_update might be running in
parallel to gen9_dc_off_power_well_enable being called from
intel_dp_detect for instance, which causes assertion triggered by
race condition, as gen9_assert_dbuf_enabled might preempt this
when registers were already updated, while dev_priv was not.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-6-stanislav.lisovskiy@intel.com
Now start using parameterized DBUF_CTL instead
of hardcoded, this would allow shorter access
functions when reading or storing entire state.
Tried to implement it in a MMIO_PIPE manner, however
DBUF_CTL1 address is higher than DBUF_CTL2, which
implies that we have to now subtract from base
rather than add.
v2: - Removed unneeded DBUF_CTL_DIST and DBUF_CTL_ADDR
macros. Started to use _PICK construct as suggested
by Matt Roper.
v3: - _DBUF_CTL_S* to DBUF_CTL_S*, changed X to "slice"
in macro(Ville Syrjälä)
- Introduced enum for enumerating DBUF slices(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-5-stanislav.lisovskiy@intel.com
Current consensus that it is redundant as
we already have skl_ddb_values struct out there,
also this struct contains only single member
which makes it unnecessary.
v2: As dirty_pipes soon going to be nuked away
from skl_ddb_values, evacuating enabled_slices
to safer in dev_priv.
v3: Changed "enabled_slices" to be "enabled_dbuf_slices_num"
(Matt Roper)
v4: - Wrapped the line getting number of dbuf slices(Matt Roper)
- Removed indeed redundant skl_ddb_values declaration(Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-2-stanislav.lisovskiy@intel.com
Give the cdclk init/uninit functions a _hw suffix to make
it clear they are about initializing the actual hardware.
I'll be wanting to to add a intel_cdclk_init() which is
purely initializing software structures.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-12-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
