IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If a coprocessor encounters an error translating an address, the
VAS will cause an interrupt in the host. The kernel processes
the fault by updating CSB. This functionality is same for both
powerNV and pseries. So this patch moves these functions to
common vas-api.c and the actual functionality is not changed.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bf8d5b0770fa1ef5cba88c96580caa08d999d3b5.camel@linux.ibm.com
Take pid and mm references when each window opens and drops during
close. This functionality is needed for powerNV and pseries. So
this patch defines the existing code as functions in common book3s
platform vas-api.c
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fa40df962250a737c804e58202924717b39e381.camel@linux.ibm.com
PowerNV uses registers to open/close VAS windows, and getting the
paste address. Whereas the hypervisor calls are used on PowerVM.
This patch adds the platform specific user space window operations
and register with the common VAS user space interface.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f85091f4ace67f951ac04d60394d67b21e2f5d3c.camel@linux.ibm.com
powerNV and pseries drivers register / unregister to the corresponding
platform specific VAS separately. Then these VAS functions call the
common API with the specific window operations. So rename powerNV VAS
API register/unregister functions.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9db00d58dbdcb7cfc07a1df95f3d2a9e3e5d746a.camel@linux.ibm.com
The pseries platform will share vas and nx code and interfaces
with the PowerNV platform, so create the
arch/powerpc/platforms/book3s/ directory and move VAS API code
there. Functionality is not changed.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e05c8db17b9eabe3545b902d034238e4c6c08180.camel@linux.ibm.com
The kernel handles the NX fault by updating CSB or sending
signal to process. In multithread applications, children can
open VAS windows and can exit without closing them. But the
parent can continue to send NX requests with these windows. To
prevent pid reuse, reference will be taken on pid and tgid
when the window is opened and release them during window close.
The current code is not releasing the tgid reference which can
cause pid leak and this patch fixes the issue.
Fixes: db1c08a740635 ("powerpc/vas: Take reference to PID and mm for user space windows")
Cc: stable@vger.kernel.org # 5.8+
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6020fc4d444864fe20f7dcdc5edfe53e67480a1c.camel@linux.ibm.com
Merge some powerpc KVM patches from our topic branch.
In particular this brings in Nick's big series rewriting parts of the
guest entry/exit path in C.
Conflicts:
arch/powerpc/kernel/security.c
arch/powerpc/kvm/book3s_hv_rmhandlers.S
Update _tlbiel_pid() such that we can avoid build errors like below when
using this function in other places.
arch/powerpc/mm/book3s64/radix_tlb.c: In function ‘__radix__flush_tlb_range_psize’:
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: warning: ‘asm’ operand 3 probably does not match constraints
114 | asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
| ^~~
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: error: impossible constraint in ‘asm’
make[4]: *** [scripts/Makefile.build:271: arch/powerpc/mm/book3s64/radix_tlb.o] Error 1
m
With this fix, we can also drop the __always_inline in __radix_flush_tlb_range_psize
which was added by commit e12d6d7d46a6 ("powerpc/mm/radix: mark __radix__flush_tlb_range_psize() as __always_inline")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210610083639.387365-1-aneesh.kumar@linux.ibm.com
When delivering a signal to a sigaction style handler (SA_SIGINFO), we
pass pointers to the siginfo and ucontext via r4 and r5.
Currently we populate the values in those registers by reading the
pointers out of the sigframe in user memory, even though the values in
user memory were written by the kernel just prior:
unsafe_put_user(&frame->info, &frame->pinfo, badframe_block);
unsafe_put_user(&frame->uc, &frame->puc, badframe_block);
...
if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
err |= get_user(regs->gpr[4], (unsigned long __user *)&frame->pinfo);
err |= get_user(regs->gpr[5], (unsigned long __user *)&frame->puc);
ie. we write &frame->info into frame->pinfo, and then read frame->pinfo
back into r4, and similarly for &frame->uc.
The code has always been like this, since linux-fullhistory commit
d4f2d95eca2c ("Forward port of 2.4 ppc64 signal changes.").
There's no reason for us to read the values back from user memory,
rather than just setting the value in the gpr[4/5] directly. In fact
reading the value back from user memory opens up the possibility of
another user thread changing the values before we read them back.
Although any process doing that would be racing against the kernel
delivering the signal, and would risk corrupting the stack, so that
would be a userspace bug.
Note that this is 64-bit only code, so there's no subtlety with the size
of pointers differing between kernel and user. Also the frame variable
is not modified to point elsewhere during the function.
In the past reading the values back from user memory was not costly, but
now that we have KUAP on some CPUs it is, so we'd rather avoid it for
that reason too.
So change the code to just set the values directly, using the same
values we have written to the sigframe previously in the function.
Note also that this matches what our 32-bit signal code does.
Using a version of will-it-scale's signal1_threads that sets SA_SIGINFO,
this results in a ~4% increase in signals per second on a Power9, from
229,777 to 239,766.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210610072949.3198522-1-mpe@ellerman.id.au
This implementation uses spin_until_cond in wd_smp_lock including
neither linux/processor.h nor asm/processor.h
This patch includes linux/processor.h here for spin_until_cond usage.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5e8d2d50f301a346040362028c2ecba40685de9e.1623438544.git.christophe.leroy@csgroup.eu
PPC_TRANSACTIONAL_MEM is only on book3s/64
SPE is only on booke
PPC_TRANSACTIONAL_MEM selects ALTIVEC and VSX
Therefore, within PPC_TRANSACTIONAL_MEM sections,
ALTIVEC and VSX are always defined while SPE never is.
Remove all SPE code and all #ifdef ALTIVEC and VSX in tm
functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a069a348ee3c2fe3123a5a93695c2b35dc42cb40.1623340691.git.christophe.leroy@csgroup.eu
Make our stack-walking code KASAN-safe by using __no_sanitize_address.
Generic code, arm64, s390 and x86 all make accesses unchecked for similar
sorts of reasons: when unwinding a stack, we might touch memory that KASAN
has marked as being out-of-bounds. In ppc64 KASAN development, I hit this
sometimes when checking for an exception frame - because we're checking
an arbitrary offset into the stack frame.
See commit 20955746320e ("s390/kasan: avoid false positives during stack
unwind"), commit bcaf669b4bdb ("arm64: disable kasan when accessing
frame->fp in unwind_frame"), commit 91e08ab0c851 ("x86/dumpstack:
Prevent KASAN false positive warnings") and commit 6e22c8366416
("tracing, kasan: Silence Kasan warning in check_stack of stack_tracer").
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210614120907.1952321-1-dja@axtens.net
With the MMCR0 control bit (PMCCEXT) in ISA v3.1, read access to
group B registers is restricted when MMCR0 PMCC=0b00. In other
platforms (like power9), the older behaviour works where group B
PMU SPRs are readable.
Patch creates a selftest which verifies that the test takes a
SIGILL when attempting to read PMU registers via helper function
"dump_ebb_state" for ISA v3.1.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-3-git-send-email-atrajeev@linux.vnet.ibm.com
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Comment says that __main() is there to make GCC happy.
It's been there since the implementation of ppc arch in Linux 1.3.45.
ppc32 is the only architecture having that. Even ppc64 doesn't have it.
Seems like GCC is still happy without it.
Drop it for good.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d01028f8166b98584eec536b52f14c5e3f98ff6b.1623172922.git.christophe.leroy@csgroup.eu
PTE_SIZE means PTE page table size in most placed, whereas
in hash_low.S in means size of one entry in the table.
Rename it PTE_T_SIZE, and define it directly in hash_low.S
instead of going through asm-offsets.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83a008a9fd6cc3f2bbcb470f592555d260ed7a3d.1623063174.git.christophe.leroy@csgroup.eu
At the time being, empty_zero_page[] is defined in each
platform head.S.
Define it in mm/mem.c instead, and put it in BSS section instead
of the DATA section. Commit 5227cfa71f9e ("arm64: mm: place
empty_zero_page in bss") explains why it is interesting to have
it in BSS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5838caffa269e0957c5a50cc85477876220298b0.1623063174.git.christophe.leroy@csgroup.eu
DEBUG_CLAMP_LAST_CONTEXT was there in the old days to reduce
number of contexts in order to ease debugging implementation
of context switching, but that's been quite stable during
years now.
As it is not user selectable, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da81837b452e8b9f1657b529b9c3050dc10b9770.1622712515.git.christophe.leroy@csgroup.eu
All KUAP helpers defined in asm/kup.h are single line functions
that should be inlined. But on book3s/32 build, we get many
instances of <prevent_write_to_user.constprop.0>.
Force inlining of those helpers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8479a862e165a57a855292d47e24c259a578f5a0.1622711627.git.christophe.leroy@csgroup.eu
Now that KUAP and KUEP have been significantly optimised and can be
disabled at boot time using 'nosmap' and 'nosmep' kernel parameters,
them can be active by default like in other powerpc platforms.
It is still possible to disable them completely in the configuration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86c7c74a3ba5312daea7e9658b096e2bcc6f4b64.1622708530.git.christophe.leroy@csgroup.eu
PPC64 uses MMU features to enable/disable KUAP at boot time.
But feature fixups are applied way too early on PPC32.
Now that all KUAP related actions are in C following the
conversion of KUAP initial setup and context switch in C,
static branches can be used to enable/disable KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Export disable_kuap_key to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cd79e8008455fba5395d099f9bb1305c039b931c.1622708530.git.christophe.leroy@csgroup.eu
PPC64 uses MMU features to enable/disable KUEP at boot time.
But feature fixups are applied way too early on PPC32.
Now that all KUEP related actions are in C following the
conversion of KUEP initial setup and context switch in C,
static branches can be used to enable/disable KUEP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7745a2c3a08ec46302920a3f48d1cb9b5469dbbb.1622708530.git.christophe.leroy@csgroup.eu
segment register has VSID on bits 8-31.
Bits 4-7 are reserved, there is no requirement to set them to 0.
VSIDs are calculated from VSID of SR0 by adding 0x111.
Even with highest possible VSID which would be 0xFFFFF0,
adding 16 times 0x111 results in 0x1001100.
So, the reserved bits are never overflowed, no need to clear
the reserved bits after each calculation.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ddc1cfd2ec8f3b2395c6a4d7f2b0c1aa1b1e64fb.1622708530.git.christophe.leroy@csgroup.eu
switch_mmu_context() does things that can easily be done in C.
For updating user segments, we have update_user_segments().
As mentionned in commit b5efec00b671 ("powerpc/32s: Move KUEP
locking/unlocking in C"), update_user_segments() has the loop
unrolled which is a significant performance gain.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/05c0875ad8220c03452c3a334946e207c6ca04d6.1622708530.git.christophe.leroy@csgroup.eu
KUEP implements the update of user segment registers.
Move it into mmu-hash.h in order to use it from other places.
And inline kuep_lock() and kuep_unlock(). Inlining kuep_lock() is
important for system_call_exception(), otherwise system_call_exception()
has to save into stack the system call parameters that are used just
after, and doing that takes more instructions than kuep_lock() itself.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24591ca480d14a62ef910e38a5273d551262c4a2.1622708530.git.christophe.leroy@csgroup.eu
PPC64 uses MMU features to enable/disable KUAP at boot time.
But feature fixups are applied way too early on PPC32.
But since commit c16728835eec ("powerpc/32: Manage KUAP in C"),
all KUAP is in C so it is now possible to use static branches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3dca510ce555335261a47c4799167da698f569c0.1622782111.git.christophe.leroy@csgroup.eu
nip is already an unsigned long, no cast needed.
op_callback_addr and emulate_step_addr are kprobe_opcode_t *.
There value is obtained with ppc_kallsyms_lookup_name() which
returns 'unsigned long', and there values are used create_branch()
which expects 'unsigned long'. So change them to 'unsigned long'
to avoid casting them back and forth.
can_optimize() used p->addr several times as 'unsigned long'.
Use a local 'unsigned long' variable and avoid casting multiple times.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e03192a6d4123242a275e71ce2ba0bb4d90700c1.1621516826.git.christophe.leroy@csgroup.eu
'struct ppc_inst' is an internal representation of an instruction, but
in-memory instructions are and will remain a table of 'u32' forever.
Replace all 'struct ppc_inst *' used for locating an instruction in
memory by 'u32 *'. This removes a lot of undue casts to 'struct
ppc_inst *'.
It also helps locating ab-use of 'struct ppc_inst' dereference.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix ppc_inst_next(), use u32 instead of unsigned int]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7062722b087228e42cbd896e39bfdf526d6a340a.1621516826.git.christophe.leroy@csgroup.eu
