IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 2cf3a3c4b84def5406b830452b1cb8bbfffe0ebe ]
When signals are hard-blocked in order to do time-travel
socket processing, we set signals_blocked and then handle
SIGIO signals by setting the SIGIO bit in signals_pending.
When unblocking, we first set signals_blocked to 0, and
then handle all pending signals. We have to set it first,
so that we can again properly block/unblock inside the
unblock, if the time-travel handlers need to be processed.
Unfortunately, this is racy. We can get into this situation:
// signals_pending = SIGIO_MASK
unblock_signals_hard()
signals_blocked = 0;
if (signals_pending && signals_enabled) {
block_signals();
unblock_signals()
...
sig_handler_common(SIGIO, NULL, NULL);
sigio_handler()
...
sigio_reg_handler()
irq_do_timetravel_handler()
reg->timetravel_handler() ==
vu_req_interrupt_comm_handler()
vu_req_read_message()
vhost_user_recv_req()
vhost_user_recv()
vhost_user_recv_header()
// reads 12 bytes header of
// 20 bytes message
<-- receive SIGIO here <--
sig_handler()
int enabled = signals_enabled; // 1
if ((signals_blocked || !enabled) && (sig == SIGIO)) {
if (!signals_blocked && time_travel_mode == TT_MODE_EXTERNAL)
sigio_run_timetravel_handlers()
_sigio_handler()
sigio_reg_handler()
... as above ...
vhost_user_recv_header()
// reads 8 bytes that were message payload
// as if it were header - but aborts since
// it then gets -EAGAIN
...
--> end signal handler -->
// continue in vhost_user_recv()
// full_read() for 8 bytes payload busy loops
// entire process hangs here
Conceptually, to fix this, we need to ensure that the
signal handler cannot run while we hard-unblock signals.
The thing that makes this more complex is that we can be
doing hard-block/unblock while unblocking. Introduce a
new signals_blocked_pending variable that we can keep at
non-zero as long as pending signals are being processed,
then we only need to ensure it's decremented safely and
the signal handler will only increment it if it's already
non-zero (or signals_blocked is set, of course.)
Note also that only the outermost call to hard-unblock is
allowed to decrement signals_blocked_pending, since it
could otherwise reach zero in an inner call, and leave
the same race happening if the timetravel_handler loops,
but that's basically required of it.
Fixes: d6b399a0e02a ("um: time-travel/signals: fix ndelay() in interrupt")
Link: https://patch.msgid.link/20240703110144.28034-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a2123b397bbe0da5e853273369d63779ac97c8c ]
The Rust compiler can take a target config from 'target.json', which is
generated by scripts/generate_rust_target.rs. It used to be that all
Linux architectures used this to generate a target.json, but now
architectures must opt-in to this, or they will default to the Rust
compiler's built-in target definition.
This is mostly okay for (64-bit) x86 and UML, except that it can
generate SSE instructions, which we can't use in the kernel. So
re-instate the custom target.json, which disables SSE (and generally
enables the 'soft-float' feature). This fixes the following compile
error:
error: <unknown>:0:0: in function _RNvMNtCs5QSdWC790r4_4core3f32f7next_up float (float): SSE register return with SSE disabled
Fixes: f82811e22b48 ("rust: Refactor the build target to allow the use of builtin targets")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20240529093336.4075206-1-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d0a8a490aa3a2a82de8826aaf1dfa38575cb77a ]
We need to have the = as part of the option so that the
value can be parsed properly. Also document that it must
be given in nanoseconds, not seconds.
Fixes: 065038706f77 ("um: Support time travel mode")
Link: https://patch.msgid.link/20240417102744.14b9a9d4eba0.Ib22e9136513126b2099d932650f55f193120cd97@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 687d6bccb28238fcfa65f7c1badfdfeac498c428 ]
Lanes can use other lanes' reference clocks, as determined by refclk.
Use refclk to determine the clock to enable/disable instead of always
using the lane's own reference clock. This ensures the clock selected in
xpsgtr_configure_pll is the one enabled.
For the other half of the equation, always program REF_CLK_SEL even when
we are selecting the lane's own clock. This ensures that Linux's idea of
the reference clock matches the hardware. We use the "local" clock mux
for this instead of going through the ref clock network.
Fixes: 25d700833513 ("phy: xilinx: phy-zynqmp: dynamic clock support for power-save")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20240628205540.3098010-2-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 967969cf594ed3c1678a9918d6e9bb2d1591cbe9 ]
cdns_torrent_dp_set_power_state() does not consider that ret might be
overwritten. Add return value check of regmap_read_poll_timeout() after
register read in cdns_torrent_dp_set_power_state().
Fixes: 5b16a790f18d ("phy: cadence-torrent: Reorder few functions to remove function declarations")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240702032042.3993031-1-make24@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edf9e04955d2387032beac54ebf20b43aaca2adf ]
Compile testing configurations without REGMAP support enabled results in
a bunch of errors being reported:
../drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:569:21: error: variable ‘rk_hdptx_phy_regmap_config’ has initializer but incomplete type
569 | static const struct regmap_config rk_hdptx_phy_regmap_config = {
| ^~~~~~~~~~~~~
../drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:570:10: error: ‘const struct regmap_config’ has no member named ‘reg_bits’
570 | .reg_bits = 32,
| ^~~~~~~~
Note that selecting REGMAP alone is not enough, because of the following
liker error:
phy-rockchip-samsung-hdptx.c:(.text+0x10c): undefined reference to `__devm_regmap_init_mmio_clk'
Instead of the obvious fix to enable REGMAP_MMIO, select MFD_SYSCON,
which implicitly enables REGMAP_MMIO as well. The rationale is that the
driver has been already relying on the syscon functionality.
Moreover, without MFD_SYSCON enabled, the test coverage is reduced,
since the linker might not detect any potential undefined references
following syscon_regmap_lookup_by_phandle() invocation in
rk_hdptx_phy_probe() body. That is because the function would
unconditionally return -ENOTSUP, hence the compiler is free to optimize
out any unreachable code.
Finally ensure PHY_ROCKCHIP_SAMSUNG_HDPTX depends on HAS_IOMEM, as
required by MFD_SYSCON.
Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240629-rk-hdptx-compile-test-fix-v1-1-c86675ba8070@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 372f8b3621294173f539b32976e41e6e12f5decf ]
Unlike other channel counts in CAPx registers, BCDMA BCHAN CNT doesn't
include UHC and HC BC channels. So include them explicitly to arrive at
total BC channel in the instance.
Fixes: 8844898028d4 ("dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240607-bcdma_chan_cnt-v2-1-bf1a55529d91@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2e821095949cde46256034975a90f88626a2a73 ]
The function kdb_position_cursor() takes in a "prompt" parameter but
never uses it. This doesn't _really_ matter since all current callers
of the function pass the same value and it's a global variable, but
it's a bit ugly. Let's clean it up.
Found by code inspection. This patch is expected to functionally be a
no-op.
Fixes: 09b35989421d ("kdb: Use format-strings rather than '\0' injection in kdb_read()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240528071144.1.I0feb49839c6b6f4f2c4bf34764f5e95de3f55a66@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70867efacf4370b6c7cdfc7a5b11300e9ef7de64 ]
When -Wformat-security is not disabled, using a string pointer
as a format causes a warning:
kernel/debug/kdb/kdb_io.c: In function 'kdb_read':
kernel/debug/kdb/kdb_io.c:365:36: error: format not a string literal and no format arguments [-Werror=format-security]
365 | kdb_printf(kdb_prompt_str);
| ^~~~~~~~~~~~~~
kernel/debug/kdb/kdb_io.c: In function 'kdb_getstr':
kernel/debug/kdb/kdb_io.c:456:20: error: format not a string literal and no format arguments [-Werror=format-security]
456 | kdb_printf(kdb_prompt_str);
| ^~~~~~~~~~~~~~
Use an explcit "%s" format instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240528121154.3662553-1-arnd@kernel.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912cee11c14376a6f707d72fcaf343a40bff48e8 ]
Existing device trees specify only a single clock-output-name for the
PCIe PHYs. The function phy_aux_clk_register() expects a second entry in
that property. When it doesn't find it, it returns an error, thus
failing the probe of the PHY and thus breaking support for the
corresponding PCIe host.
Follow the approach of the combo USB+DT PHY and generate the name for
the AUX clocks instead of requiring it in DT.
Fixes: 583ca9ccfa80 ("phy: qcom: qmp-pcie: register second optional PHY AUX clock")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240614-fix-pcie-phy-compat-v3-1-730d1811acf4@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9f499b8c791d2983c0a31a543c51d1b2f15e8755 upstream.
While working on simplifying the minmax functions, and avoiding
excessive macro expansion, it turns out that the sr.c use of the
'clamp()' macro has the arguments the wrong way around.
The clamp logic is
val = clamp(in, low, high);
and it returns the input clamped to the low/high limits. But sr.c ddid
speed = clamp(0, speed, 0xffff / 177);
which clamps the value '0' to the range '[speed, 0xffff / 177]' and ends
up being nonsensical.
Happily, I don't think anybody ever cared.
Fixes: 9fad9d560af5 ("scsi: sr: Fix unintentional arithmetic wraparound")
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2237ceb71f89837ac47c5dce2aaa2c2b3a337a3c upstream.
Every time a watch is reestablished after getting lost, we need to
update the cookie which involves quiescing exclusive lock. For this,
we transition from RBD_LOCK_STATE_LOCKED to RBD_LOCK_STATE_QUIESCING
roughly for the duration of rbd_reacquire_lock() call. If the mapping
is exclusive and I/O happens to arrive in this time window, it's failed
with EROFS (later translated to EIO) based on the wrong assumption in
rbd_img_exclusive_lock() -- "lock got released?" check there stopped
making sense with commit a2b1da09793d ("rbd: lock should be quiesced on
reacquire").
To make it worse, any such I/O is added to the acquiring list before
EROFS is returned and this sets up for violating rbd_lock_del_request()
precondition that the request is either on the running list or not on
any list at all -- see commit ded080c86b3f ("rbd: don't move requests
to the running list on errors"). rbd_lock_del_request() ends up
processing these requests as if they were on the running list which
screws up quiescing_wait completion counter and ultimately leads to
rbd_assert(!completion_done(&rbd_dev->quiescing_wait));
being triggered on the next watch error.
Cc: stable@vger.kernel.org # 06ef84c4e9c4: rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait
Cc: stable@vger.kernel.org
Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5c466a0fdb2d9f3650d2e3911b0735f17ba00cf upstream.
... to RBD_LOCK_STATE_QUIESCING and quiescing_wait to recognize that
this state and the associated completion are backing rbd_quiesce_lock(),
which isn't specific to releasing the lock.
While exclusive lock does get quiesced before it's released, it also
gets quiesced before an attempt to update the cookie is made and there
the lock is not released as long as ceph_cls_set_cookie() succeeds.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f4e62730a91572b7fdc657f7bb747e107ae308 upstream.
Panfrost DRM driver uses devfreq to perform DVFS, while using simple_ondemand
devfreq governor by default. This causes driver initialization to fail on
boot when simple_ondemand governor isn't built into the kernel statically,
as a result of the missing module dependency and, consequently, the required
governor module not being included in the initial ramdisk. Thus, let's mark
simple_ondemand governor as a softdep for Panfrost, to have its kernel module
included in the initial ramdisk.
This is a rather longstanding issue that has forced distributions to build
devfreq governors statically into their kernels, [1][2] or has forced users
to introduce some unnecessary workarounds. [3]
For future reference, not having support for the simple_ondemand governor in
the initial ramdisk produces errors in the kernel log similar to these below,
which were taken from a Pine64 RockPro64:
panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq
panfrost ff9a0000.gpu: Fatal error during GPU init
panfrost: probe of ff9a0000.gpu failed with error -22
Having simple_ondemand marked as a softdep for Panfrost may not resolve this
issue for all Linux distributions. In particular, it will remain unresolved
for the distributions whose utilities for the initial ramdisk generation do
not handle the available softdep information [4] properly yet. However, some
Linux distributions already handle softdeps properly while generating their
initial ramdisks, [5] and this is a prerequisite step in the right direction
for the distributions that don't handle them properly yet.
[1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/linux61/config?ref_type=heads#L8180
[2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/1066
[3] https://forum.pine64.org/showthread.php?tid=15458
[4] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d
[5] 97ac4d37aa
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: Furkan Kardame <f.kardame@manjaro.org>
Cc: stable@vger.kernel.org
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e1e00422a14db4e2a80870afb704405da16fd1b.1718655077.git.dsimic@manjaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 704d3d60fec451f37706368d9d3e320322978986 upstream.
Since 45ecaea73883 ("drm/sched: Partial revert of 'drm/sched: Keep
s_fence->parent pointer'") still active jobs aren't put back in the
pending list on drm_sched_start(), as they don't have a active
parent fence anymore, so if the GPU is still working and the timeout
is extended, all currently active jobs will be freed.
To avoid prematurely freeing jobs that are still active on the GPU,
don't block the scheduler until we are fully committed to actually
reset the GPU.
As the current job is already removed from the pending list and
will not be put back when drm_sched_start() isn't called, we must
make sure to put the job back on the pending list when extending
the timeout.
Cc: stable@vger.kernel.org #6.0
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c04366b1207a036b7de02dfcc1ac7138d3343c9b upstream.
Some global register address variable may be missing on
specific CPU type, test them before use them.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e7ca0b57f3bc09ba3e4ab86bf6b7c35134bfd04 upstream.
We should always use firmware's poweroff & reboot service
if it's available as firmware may need to perform more task
than platform's syscon etc.
However _machine_restart & poweroff hooks are registered at
low priority, which means platform reboot driver can override
them.
Register firmware based reboot/poweroff implementation with
register_sys_off_handler with appropriate priority so that
they will be prioritised. Remove _machine_halt hook as it's
deemed to be unnecessary.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b81656c37acf1e682dde02f3e07987784b0f3634 upstream.
Builtin DTBS should never contain memory node as memory is
going to be managed by LEFI interface.
Remove memory node to prevent confliction.
Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77543269ff23c75bebfb8e6e9a1177b350908ea7 upstream.
Somehow those enablement bits were left over when we were
adding initial Loongson-2K support.
Set up basic information and select proper builtin DTB for
Loongson-2K.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 813c18d1ca1987afaf47e035152e1baa1375b1b2 upstream.
phy-mode should be rgmii-id to match hardware configuration.
Also there should be a phy-handle to reference phy node.
Fixes: f8a11425075f ("MIPS: Loongson64: Add GMAC support for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8de4ed75bd14ed197119ac509c6902a8561e0c1c upstream.
Include linux/processor.h to fix build error:
arch/mips/sgi-ip30/ip30-console.c: In function ‘prom_putchar’:
arch/mips/sgi-ip30/ip30-console.c:21:17: error: implicit declaration of function ‘cpu_relax’ [-Werror=implicit-function-declaration]
21 | cpu_relax();
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da3f62466e5afc752f8b72146bbc4700dbba5a9f upstream.
ISA node is required by Loongson64 platforms to initialize
PIO support.
Kernel will hang at boot without ISA node.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dce68a49be26abf52712e0ee452a45fa01ab4624 upstream.
In imx_rproc_addr_init() strcmp() is performed over the node after the
of_node_put() is performed over it.
Fix this error by moving of_node_put() calls.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5e4c1243071d ("remoteproc: imx_rproc: support remote cores booted before Linux Kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240612131714.12907-1-amishin@t-argos.ru
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fa26ca8b786888673689ccc9da6094150939982 upstream.
In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts
number of phandles. But phandles may be empty. So of_parse_phandle() in
the parsing loop (0 < a < nph) may return NULL which is later dereferenced.
Adjust this issue by adding NULL-return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a0ff4aa6f010 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240606075204.12354-1-amishin@t-argos.ru
[Fixed title to fit within the prescribed 70-75 charcters]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ceccb14f5576e02b81cc8b105ab81f224bd87f6 upstream.
Expanding on the previous commit, assuming that rbd_is_lock_owner()
always returns true (i.e. that we are either in RBD_LOCK_STATE_LOCKED
or RBD_LOCK_STATE_QUIESCING) if the mapping is exclusive is wrong too.
In case ceph_cls_set_cookie() fails, the lock would be temporarily
released even if the mapping is exclusive, meaning that we can end up
even in RBD_LOCK_STATE_UNLOCKED.
IOW, exclusive mappings are really "just" about disabling automatic
lock transitions (as documented in the man page), not about grabbing
the lock and holding on to it whatever it takes.
Cc: stable@vger.kernel.org
Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3708c7269593b836b1d684214cd9f5d83e4ed3fd upstream.
When CONFIG_DM_VERITY=y, dm_is_verity_target() returned true for any
builtin dm target, not just dm-verity. Fix this by checking for
verity_target instead of THIS_MODULE (which is NULL for builtin code).
Fixes: b6c1c5745ccc ("dm: Add verity helpers for LoadPin")
Cc: stable@vger.kernel.org
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17c743b9da9e0d073ff19fd5313f521744514939 upstream.
Building the sigaltstack test with GCC on 64-bit powerpc errors with:
gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas
In file included from sas.c:23:
current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent"
22 | #error "implement current_stack_pointer equivalent"
| ^~~~~
sas.c: In function ‘my_usr1’:
sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’?
50 | if (sp < (unsigned long)sstack ||
| ^~
This happens because GCC doesn't define __ppc__ for 64-bit builds, only
32-bit builds. Instead use __powerpc__ to detect powerpc builds, which
is defined by clang and GCC for 64-bit and 32-bit builds.
Fixes: 05107edc9101 ("selftests: sigaltstack: fix -Wuninitialized")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240520062647.688667-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aee2424246f9f1dadc33faa78990c1e2eb7826e4 upstream.
iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with
an existing struct iw_cm_id (cm_id) as follows:
conn_id->cm_id.iw = cm_id;
cm_id->context = conn_id;
cm_id->cm_handler = cma_iw_handler;
rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make
sure that cm_work_handler() does not trigger a use-after-free by only
freeing of the struct rdma_id_private after all pending work has finished.
Cc: stable@vger.kernel.org
Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref")
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-6-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4d430db17b4ef4e9c3c352a04b2fe3c93011978 upstream.
cpu_hwmon is unsupported on CPUs without loongson_chiptemp
register and csr.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe836c78ef1ff16da32912c22348091a0d67bda1 upstream.
It is incorrect to request the input pin format of the destination widget
using the output pin index of the source module as the indexes are not
necessarily matching.
moduleA.out_pin1 can be connected to moduleB.in_pin0 for example.
Use the dst_queue_id to request the input format of the destination module.
This bug remained unnoticed likely because in nocodec topologies we don't
have process modules after a module copier, thus the pin/queue index is
ignored.
For the process module case, the code was likely have been tested in a
controlled way where all the pin/queue/format properties were present to
work.
Update the debug prints to have better information.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: stable@vger.kernel.org # v6.8+
Link: https://patch.msgid.link/20240624121519.91703-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f3ae72c5dbca9ba558c752f1ef969ed6908be01 upstream.
Driver does not unregister typec structures (typec_mux_dev and
typec_switch_desc) during removal leading to leaks. Fix this by moving
typec registering parts to separate function and using devm interface to
release them. This also makes code a bit simpler:
- Smaller probe() function with less error paths and no #ifdefs,
- No need to store typec_mux_dev and typec_switch_desc in driver state
container structure.
Cc: stable@vger.kernel.org
Fixes: 10f514bd172a ("ASoC: codecs: Add WCD939x Codec driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20240701122616.414158-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7d0b2db5bc5e8c0fdc67b3c8f463c3dfec92f77 upstream.
MHI endpoint stack accidentally started allocating memory for objects from
DMA zone since commit 62210a26cd4f ("bus: mhi: ep: Use slab allocator
where applicable"). But there is no real need to allocate memory from this
naturally limited DMA zone. This also causes the MHI endpoint stack to run
out of memory while doing high bandwidth transfers.
So let's switch over to normal memory.
Cc: <stable@vger.kernel.org> # 6.8
Fixes: 62210a26cd4f ("bus: mhi: ep: Use slab allocator where applicable")
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
Link: https://lore.kernel.org/r/20240603164354.79035-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f944ffcbc2e1c759764850261670586ddf3bdabb upstream.
For systems on which the performance counter can expire early due to turbo
modes the watchdog handler has a safety net in place which validates that
since the last watchdog event there has at least 4/5th of the watchdog
period elapsed.
This works reliably only after the first watchdog event because the per
CPU variable which holds the timestamp of the last event is never
initialized.
So a first spurious event will validate against a timestamp of 0 which
results in a delta which is likely to be way over the 4/5 threshold of the
period. As this might happen before the first watchdog hrtimer event
increments the watchdog counter, this can lead to false positives.
Fix this by initializing the timestamp before enabling the hardware event.
Reset the rearm counter as well, as that might be non zero after the
watchdog was disabled and reenabled.
Link: https://lkml.kernel.org/r/87frsfu15a.ffs@tglx
Fixes: 7edaeb6841df ("kernel/watchdog: Prevent false positives with turbo modes")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc82336b50e7652530bc32caec80be0f8792513b upstream.
Read callbacks registered with nvmem core expect 0 to be returned on
success and a negative value to be returned on failure.
abx80x_nvmem_xfer() on read calls i2c_smbus_read_i2c_block_data() which
returns the number of bytes read on success as per its api description,
this return value is handled as an error and returned to nvmem even on
success.
Fix to handle all possible values that would be returned by
i2c_smbus_read_i2c_block_data().
Fixes: e90ff8ede777 ("rtc: abx80x: Add nvmem support")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20240613120750.1455209-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70f1ae5f0e7f44edf842444044615da7b59838c1 upstream.
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
isl1208_nvmem_read()/isl1208_nvmem_write() currently return the number of
bytes read/written on success, fix to return 0 on success and negative on
failure.
Fixes: c3544f6f51ed ("rtc: isl1208: Add new style nvmem support to driver")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Link: https://lore.kernel.org/r/20240612080831.1227131-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 509580fad7323b6a5da27e8365cd488f3b57210e upstream.
Switching to transparent mode leads to a loss of link synchronization,
so prevent doing this on an active link. This happened at least on an
Intel N100 system / DELL UD22 dock, the LTTPR residing either on the
host or the dock. To fix the issue, keep the current mode on an active
link, adjusting the LTTPR count accordingly (resetting it to 0 in
transparent mode).
v2: Adjust code comment during link training about reiniting the LTTPRs.
(Ville)
Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training")
Reported-and-tested-by: Gareth Yu <gareth.yu@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10902
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-3-imre.deak@intel.com
(cherry picked from commit 211ad49cf8ccfdc798a719b4d1e000d0a8a9e588)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d13e2a6e95e6b87f571c837c71a3d05691def9bb upstream.
Regularly retraining a link during an atomic commit happens with the
given pipe/link already disabled and hence intel_dp->link_trained being
false. Ensure this also for retraining a DP SST link via direct calls to
the link training functions (vs. an actual commit as for DP MST). So far
nothing depended on this, however the next patch will depend on
link_trained==false for changing the LTTPR mode to non-transparent.
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-2-imre.deak@intel.com
(cherry picked from commit a4d5ce61765c08ab364aa4b327f6739b646e6cfa)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df65aabef3c0327c23b840ab5520150df4db6b5f upstream.
Return 0 to avoid returning an uninitialized variable r.
Cc: stable@vger.kernel.org
Fixes: 230dd6bb6117 ("drm/amd/amdgpu: implement mode2 reset on smu_v13_0_10")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6472de66c0aa18d50a4b5ca85f8272e88a737676)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5659b0c93a1ea02c662a030b322093203f299185 upstream.
[Why]
Page table of compute VM in the VRAM will lost after gpu reset.
VRAM won't be restored since compute VM has no shadows.
[How]
Use higher 32-bit of vm->generation to record a vram_lost_counter.
Reset the VM state machine when vm->genertaion is not equal to
the new generation token.
v2: Check vm->generation instead of calling drm_sched_entity_error
in amdgpu_vm_validate.
v3: Use new generation token instead of vram_lost_counter for check.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 47c0388b0589cb481c294dcb857d25a214c46eb3)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d63d81094d208abb20fc444514b2d9ec2f4b7c4e upstream.
[Why]
After supend/resume, with topology unchanged, observe that
link_address_sent of all mstb are marked as false even the topology probing
is done without any error.
It is caused by wrongly also include "ret == 0" case as a probing failure
case.
[How]
Remove inappropriate checking conditions.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Fixes: 37dfdc55ffeb ("drm/dp_mst: Cleanup drm_dp_send_link_address() a bit")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-2-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5aed213c7c6c4f5dcb1a3ef146f493f18fe703dc upstream.
DisplayLink devices do not generate hotplug events. Remove the poll
flag DRM_CONNECTOR_POLL_HPD, as it may not be specified together with
DRM_CONNECTOR_POLL_CONNECT or DRM_CONNECTOR_POLL_DISCONNECT.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: afdfc4c6f55f ("drm/udl: Fixed problem with UDL adpater reconnection")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: Robert Tarasov <tutankhamen@chromium.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a03ebf116303e5d13ba9a2b65726b106cb1e96f6 upstream.
We seem to have a case where SDMA will sometimes miss a doorbell
if GFX is entering the powergating state when the doorbell comes in.
To workaround this, we can update the wptr via MMIO, however,
this is only safe because we disallow gfxoff in begin_ring() for
SDMA 5.2 and then allow it again in end_ring().
Enable this workaround while we are root causing the issue with
the HW team.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/3440
Tested-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit f2ac52634963fc38e4935e11077b6f7854e5d700)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65564157ae64cec0f527583f96e32f484f730f92 upstream.
We're seeing a GPU hang issue on a CHV platform, which was caused by commit
bac24f59f454 ("drm/i915/execlists: Enable coarse preemption boundaries for
Gen8").
The Gen8 platform only supports timeslicing and doesn't have a preemption
mechanism, as its engines do not have a preemption timer.
Commit 751f82b353a6 ("drm/i915/gt: Only disable preemption on Gen8 render
engines") addressed this issue only for render engines. This patch extends
that fix by ensuring that preemption is not considered for all engines on
Gen8 platforms.
v4:
- Use the correct Fixes tag (Rodrigo Vivi)
- Reworded commit log (Andi Shyti)
v3:
- Inside need_preempt(), condition of can_preempt() is not required
as simplified can_preempt() is enough. (Chris Wilson)
v2: Simplify can_preempt() function (Tvrtko Ursulin)
Fixes: 751f82b353a6 ("drm/i915/gt: Only disable preemption on gen8 render engines")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11396
Suggested-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
CC: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711163208.1355736-1-nitin.r.gote@intel.com
(cherry picked from commit 7df0be6e6280c6fca01d039864bb123e5e36604b)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
