IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 162bd18eb55adf464a0fa2b4144b8d61c75ff7c2 ]
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9d36cf445ffff0b913ba187a3eff78028f9b1fb ]
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.
This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.
But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.
Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().
That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.
If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.
On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.
If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.
Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.
There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.
That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.
For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.
This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.
Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.
Fixes: 9c336c9935cf ("tick/broadcast: Allow late registered device to enter oneshot mode")
Reported-by: Victor Hassan <victor@allwinnertech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a7edd041f2d252f251523ba3f2eaead076a8f8d ]
Even when urgent BKOPS fails, the consumer will get stuck in runtime
suspend status. Like commit 1a5665fc8d7a ("scsi: ufs: core: WLUN suspend
SSU/enter hibern8 fail recovery"), trigger the error handler and return
-EBUSY to break the suspend.
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230425031721epcms2p5d4de65616478c967d466626e20c42a3a@epcms2p5
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27c1eaa07283b0c94becf8241f95368267cf558b ]
Should of_mdiobus_register() fail, a previous usb_get_dev() call should be
undone as in the .disconnect function.
Fixes: 04e37d92fbed ("net: phy: add marvell usb to mdio controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46dd6078dbc7e363a8bb01209da67015a1538929 ]
Fix kernel-doc warnings from the kernel test robot:
jornada720_ssp.c:24: warning: Function parameter or member 'jornada_ssp_lock' not described in 'DEFINE_SPINLOCK'
jornada720_ssp.c:24: warning: expecting prototype for arch/arm/mac(). Prototype was for DEFINE_SPINLOCK() instead
jornada720_ssp.c:34: warning: Function parameter or member 'byte' not described in 'jornada_ssp_reverse'
jornada720_ssp.c:57: warning: Function parameter or member 'byte' not described in 'jornada_ssp_byte'
jornada720_ssp.c:85: warning: Function parameter or member 'byte' not described in 'jornada_ssp_inout'
Link: lore.kernel.org/r/202304210535.tWby3jWF-lkp@intel.com
Fixes: 69ebb22277a5 ("[ARM] 4506/1: HP Jornada 7XX: Addition of SSP Platform Driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kristoffer Ericson <Kristoffer.ericson@gmail.com>
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26cc2934331b57b5a7164bff344f0a2ec245fc0 ]
After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle
detection more robust"), fw_devlink prints an error when consumer
devices don't have their fwnode set. This used to be ignored silently.
Set the fwnode mipi_dsi_device so fw_devlink can find them and properly
track their dependencies.
This fixes errors like this:
[ 0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8
[ 0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi
Reported-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/lkml/2a8e407f4f18c9350f8629a2b5fa18673355b2ae.camel@puri.sm/
Fixes: 068a00233969 ("drm: Add MIPI DSI bus support")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/r/20230310063910.2474472-1-saravanak@google.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit da5e14909776edea4462672fb4a3007802d262e7 upstream.
[Why&How]
When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This triggers a -Wdeclaration-after-statement as the code has changed a
bit since upstream. It might be better to hoist the whole block up, but
this is a smaller change so I went with it.
arch/riscv/mm/init.c:755:16: warning: mixing declarations and code is a C99 extension [-Wdeclaration-after-statement]
unsigned long idx = pgd_index(__fix_to_virt(FIX_FDT));
^
1 warning generated.
Fixes: bbf94b042155 ("riscv: Move early dtb mapping into the fixmap region")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304300429.SXZOA5up-lkp@intel.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3899d94e3831ee07ea6821c032dc297aec80586a upstream.
When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.
The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.
Since commit b4a6bb3a67aa ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.
So use the correct set of flags to actually make the flush happen.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kernel.org
Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources")
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f upstream.
There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.
It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.
Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.
Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3eeca5e5f3100435b06a5b5d86daa3d135a8a4bd upstream.
The adreno_load_gpu() path is guarded by an error check on
adreno_load_fw(). This function is responsible for loading
Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it
does not take the vendor-signed ZAP blob into account.
By embedding the SQE (and GMU, if necessary) firmware into the
initrd/kernel, we can trigger and unfortunate path that would not bail
out early and proceed with gpu->hw_init(). That will fail, as the ZAP
loader path will not find the firmware and return back to
adreno_load_gpu().
This error path involves pm_runtime_put_sync() which then calls idle()
instead of suspend(). This is suboptimal, as it means that we're not
going through the clean shutdown sequence. With at least A619_holi, this
makes the GPU not wake up until it goes through at least one more
start-fail-stop cycle. The pm_runtime_put_sync that appears in the error
path actually does not guarantee that because of the earlier enabling of
runtime autosuspend.
Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown.
Test cases:
1. All firmware baked into kernel
2. error loading ZAP fw in initrd -> load from rootfs at DE start
Both succeed on A619_holi (SM6375) and A630 (SDM845).
Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/530001/
Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a534e1d0d1591e951f9ece2fb460b2ff92edabd upstream.
In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2220eaf90992c11d888fe771055d4de330385f01 upstream.
Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted. Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.
Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4ce24f54d9cca4f09a395f3eecce20d6bec4663 upstream.
In no journal mode, ext4_finish_convert_inline_dir() can self-deadlock
by calling ext4_handle_dirty_dirblock() when it already has taken the
directory lock. There is a similar self-deadlock in
ext4_incvert_inline_data_nolock() for data files which we'll fix at
the same time.
A simple reproducer demonstrating the problem:
mke2fs -Fq -t ext2 -O inline_data -b 4k /dev/vdc 64
mount -t ext4 -o dirsync /dev/vdc /vdc
cd /vdc
mkdir file0
cd file0
touch file0
touch file1
attr -s BurnSpaceInEA -V abcde .
touch supercalifragilisticexpialidocious
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230507021608.1290720-1-tytso@mit.edu
Reported-by: syzbot+91dccab7c64e2850a4e5@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=ba84cc80a9491d65416bc7877e1650c87530fe8a
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c0b4818b1f636bc96359f7817a2d8bab6370162 upstream.
If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.
This commit fixes two problem. The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free. The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa83c34e3e56b3c672af38059e066242655271b1 upstream.
When ext4_iomap_overwrite_begin() calls ext4_iomap_begin() map blocks may
fail for some reason (e.g. memory allocation failure, bare disk write), and
later because "iomap->type ! = IOMAP_MAPPED" triggers WARN_ON(). When ext4
iomap_begin() returns an error, it is normal that the type of iomap->type
may not match the expectation. Therefore, we only determine if iomap->type
is as expected when ext4_iomap_begin() is executed successfully.
Cc: stable@kernel.org
Reported-by: syzbot+08106c4b7d60702dbc14@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/00000000000015760b05f9b4eee9@google.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230505132429.714648-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 492888df0c7b42fc0843631168b0021bc4caee84 upstream.
When using cached extent stored in extent status tree in tree->cache_es
another process holding ei->i_es_lock for reading can be racing with us
setting new value of tree->cache_es. If the compiler would decide to
refetch tree->cache_es at an unfortunate moment, it could result in a
bogus in_range() check. Fix the possible race by using READ_ONCE() when
using tree->cache_es only under ei->i_es_lock for reading.
Cc: stable@kernel.org
Reported-by: syzbot+4a03518df1e31b537066@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000d3b33905fa0fd4a6@google.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230504125524.10802-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92cc5d00a431e96e5a49c0b97e5ad4fa7536bd4b upstream.
Apparently despite it being marked inline, the compiler
may not inline __down_read_common() which makes it difficult
to identify the cause of lock contention, as the blocked
function in traceevents will always be listed as
__down_read_common().
So this patch adds __always_inline annotation to the common
function (as well as the inlined helper callers) to force it to
be inlined so the blocking function will be listed (via Wchan)
in traceevents.
Fixes: c995e638ccbb ("locking/rwsem: Fold __down_{read,write}*()")
Reported-by: Tim Murray <timmurray@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230503023351.2832796-1-jstultz@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7b4323373d844954bb76e0e9f39c4e5fc785fa7b ]
Deadlock is triggered by sending multiple concurrent session setup
requests. It should be reused after releasing when getting ctx for crypto.
Multiple consecutive ctx uses cause deadlock while waiting for releasing
due to the limited number of ctx.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20591
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af7c39d971e43cd0af488729bca362427ad99488 ]
After multi-channel connection with windows, Several channels of
session are connected. Among them, if there is a problem in one channel,
Windows connects again after disconnecting the channel. In this process,
the session is released and a kernel oop can occurs while processing
requests to other channels. When the channel is disconnected, if other
channels still exist in the session after deleting the channel from
the channel list in the session, the session should not be released.
Finally, the session will be released after all channels are disconnected.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 7b4323373d84 ("ksmbd: fix deadlock in ksmbd_find_crypto_ctx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17ea92a9f6d0b9a97aaec5ab748e4591d70a562c ]
There is a report that kernel oops happen from idr_remove().
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000010
kernel: RIP: 0010:idr_remove+0x1/0x20
kernel: __ksmbd_close_fd+0xb2/0x2d0 [ksmbd]
kernel: ksmbd_vfs_read+0x91/0x190 [ksmbd]
kernel: ksmbd_fd_put+0x29/0x40 [ksmbd]
kernel: smb2_read+0x210/0x390 [ksmbd]
kernel: __process_request+0xa4/0x180 [ksmbd]
kernel: __handle_ksmbd_work+0xf0/0x290 [ksmbd]
kernel: handle_ksmbd_work+0x2d/0x50 [ksmbd]
kernel: process_one_work+0x21d/0x3f0
kernel: worker_thread+0x50/0x3d0
kernel: rescuer_thread+0x390/0x390
kernel: kthread+0xee/0x120
kthread_complete_and_exit+0x20/0x20
kernel: ret_from_fork+0x22/0x30
While accessing files, If connection is disconnected, windows send
session setup request included previous session destroy. But while still
processing requests on previous session, this request destroy file
table, which mean file table idr will be freed and set to NULL.
So kernel oops happen from ft->idr in __ksmbd_close_fd().
This patch don't directly destroy session in destroy_previous_session().
It just set to KSMBD_SESS_EXITING so that connection will be
terminated after finishing the rest of requests.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 7b4323373d84 ("ksmbd: fix deadlock in ksmbd_find_crypto_ctx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4d3e6b524c0c928f7fc9e03e047885c4951ae60 ]
Replace sessions list in connection with xarray.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 7b4323373d84 ("ksmbd: fix deadlock in ksmbd_find_crypto_ctx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce53d365378cde71bb6596d79c257e600d951d29 ]
When RSS mode is enable, windows client do simultaneously send several
session requests to server. There is racy issue using
sess->ntlmssp.cryptkey on N connection : 1 session. So authetication
failed using wrong cryptkey on some session. This patch move cryptkey
to ksmbd_conn structure to use each cryptkey on connection.
Tested-by: Ziwei Xie <zw.xie@high-flyer.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 7b4323373d84 ("ksmbd: fix deadlock in ksmbd_find_crypto_ctx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a58b45a4dbfd0bf2ebb157789da4d8e6368afb1b ]
Set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO if netdev has
multi tx queues. And add ksmbd_compare_user() to avoid racy condition
issue in ksmbd_free_user(). because windows client is simultaneously used
to send session setup requests for multichannel connection.
Tested-by: Ziwei Xie <zw.xie@high-flyer.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 7b4323373d84 ("ksmbd: fix deadlock in ksmbd_find_crypto_ctx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14705f969d98187a1cc2682e0c9bd2e230b8098f ]
On my RTW8821CU chipset rfe_option reads as 0x22. Looking at the
vendor driver suggests that the field width of rfe_option is 5 bit,
so rfe_option should be masked with 0x1f.
Without this the rfe_option comparisons with 2 further down the
driver evaluate as false when they should really evaluate as true.
The effect is that 2G channels do not work.
rfe_option is also used as an array index into rtw8821c_rfe_defs[].
rtw8821c_rfe_defs[34] (0x22) was added as part of adding USB support,
likely because rfe_option reads as 0x22. As this now becomes 0x2,
rtw8821c_rfe_defs[34] is no longer used and can be removed.
Note that this might not be the whole truth. In the vendor driver
there are indeed places where the unmasked rfe_option value is used.
However, the driver has several places where rfe_option is tested
with the pattern if (rfe_option == 2 || rfe_option == 0x22) or
if (rfe_option == 4 || rfe_option == 0x24), so that rfe_option BIT(5)
has no influence on the code path taken. We therefore mask BIT(5)
out from rfe_option entirely until this assumption is proved wrong
by some chip variant we do not know yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: ValdikSS <iam@valdikss.org.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-3-s.hauer@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d29fb7baab09b6a1dc484c9c67933253883e770a ]
[Why]
While scanning the top_pipe connections we can run into a case where
the bottom pipe is still connected to a top_pipe but with a NULL
plane_state.
[How]
Treat a NULL plane_state the same as the plane being invisible for
pipe cursor disable logic.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63f8bee439c0e3f94cff90d0f9c7b719be693265 ]
[Why]
In some scenarios like fullscreen game, major plane is scaled. Then
if a upper layer owns the cursor, cursor is invisiable in the
majority of the screen.
[How]
Instead assuming upper plane handles cursor, summing up upper
split planes on the same layer. If whole upper plane covers current
half/whole pipe plane, disable cursor.
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d29fb7baab09 ("drm/amd/display: Add NULL plane_state check for cursor disable logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d997f95b70f98987ae031a89677c13e0e223670 ]
A recent commit moved enabling of runtime PM to GPU load time (first
open()) but failed to update the error paths so that runtime PM is
disabled if initialisation of the GPU fails. This would trigger a
warning about the unbalanced disable count on the next open() attempt.
Note that pm_runtime_put_noidle() is sufficient to balance the usage
count when pm_runtime_put_sync() fails (and is chosen over
pm_runtime_resume_and_get() for consistency reasons).
Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524971/
Link: https://lore.kernel.org/r/20230303164807.13124-3-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c28e2f2b417ed747bfbc5f900c87f3ec9cc6b25e ]
The remaining struct_mutex usage is just to serialize various gpu
related things (submit/retire/recover/fault/etc), so replace
struct_mutex with gpu->lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211109181117.591148-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Stable-dep-of: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edd34368c4c3b45b1386b15f78b2229420f8c6d4 ]
This patch adds a fix to support 297MHz of dot clock by calculating
the pll values using synopsis algorithm.
This will help to support 4k@30 mode for HDMI monitors on DG2.
v2: As per the algorithm, set MPLLB VCO range control bits to 3,
in register SNPS_PHY_MPLLB_DIV for 297Mhz. (Matt)
v3: Fix typo. (Ankit)
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525080401.1253511-1-ankit.k.nautiyal@intel.com
Stable-dep-of: d46746b8b13c ("drm/i915/dg2: Add HDMI pixel clock frequencies 267.30 and 319.89 MHz")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6bbabd28805f36baf6d0f3eb082db032a638f612 upstream.
commit b7898396f4bbe16 ("ASoC: soc-pcm: Fix and cleanup DPCM locking")
added __soc_pcm_close() for non-lock version of soc_pcm_close().
But soc_pcm_close() is not using it. It is no problem, but confusable.
static int __soc_pcm_close(...)
{
=> return soc_pcm_clean(rtd, substream, 0);
}
static int soc_pcm_close(...)
{
...
snd_soc_dpcm_mutex_lock(rtd);
=> soc_pcm_clean(rtd, substream, 0);
snd_soc_dpcm_mutex_unlock(rtd);
return 0;
}
This patch use it.
Fixes: b7898396f4bbe16 ("ASoC: soc-pcm: Fix and cleanup DPCM locking")
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czctgg3w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 754590651ccbbcc74a7c20907be4bb15d642bde3 upstream.
When DPCM tries to add valid BE connections at dpcm_add_paths(), it
doesn't check whether the picked BE actually supports for the given
stream direction. Due to that, when an asymmetric BE stream is
present, it picks up wrongly and this may result in a NULL dereference
at a later point where the code assumes the existence of a
corresponding BE substream.
This patch adds the check for the presence of the substream for the
target BE for avoiding the problem above.
Note that we have already some fix for non-existing BE substream at
commit 6246f283d5e0 ("ASoC: dpcm: skip missing substream while
applying symmetry"). But the code path we've hit recently is rather
happening before the previous fix. So this patch tries to fix at
picking up a BE instead of parsing BE lists.
Fixes: bbf7d3b1c4f4 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE")
Reported-by: Alex Natalsson <harmoniesworlds@gmail.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/CADs9LoPZH_D+eJ9qjTxSLE5jGyhKsjMN7g2NighZ16biVxsyKw@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801170510.26582-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f620684c1ef5a002b6622ecc7b5818e81252f48 upstream.
The recent fix for DPCM locking also covered the loop in
dpcm_be_disconnect() with the FE stream lock. This caused an
unexpected side effect, thought: calling debugfs_remove_recursive() in
the spinlock may lead to lockdep splats as the code there assumes the
SOFTIRQ-safe context.
For avoiding the problem, this patch changes the disconnection
procedure to two phases: at first, the matching entries are removed
from the linked list, then the resources are freed outside the lock.
Fixes: b7898396f4bb ("ASoC: soc-pcm: Fix and cleanup DPCM locking")
Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220119155249.26754-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37b58becc1cee4d591024f2056d7ffa99c6089e0 upstream.
After commit bbf7d3b1c4f40 ("ASoC: soc-pcm: align BE 'atomicity' with
that of the FE") BE and FE atomicity must match.
In the case of Compress PCM there is a mismatch in atomicity between FE
and BE and we get errors like this:
[ 36.434566] sai1-wm8960-hifi: dpcm_be_connect: FE is atomic but BE
is nonatomic, invalid configuration
[ 36.444278] PCM Deep Buffer: ASoC: can't connect SAI1.OUT
In order to fix this we must inherit the atomicity from DAI link
associated with current PCM Compress FE.
Fixes: bbf7d3b1c4f4 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230324124019.30826-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c75c0ea5da749bd1efebd1387f2e5011b8c7d78 upstream.
The recent change for DPCM locking caused spurious lockdep warnings.
Actually the warnings are false-positive, as those are triggered due
to the nested stream locks for FE and BE. Since both locks belong to
the same lock class, lockdep sees it as if a deadlock.
For fixing this, we need to take PCM stream locks for BE with the
nested lock primitives. Since currently snd_pcm_stream_lock*() helper
assumes only the top-level single locking, a new helper function
snd_pcm_stream_lock_irqsave_nested() is defined for a single-depth
nested lock, which is now used in the BE DAI trigger that is always
performed inside a FE stream lock.
Fixes: b2ae80663008 ("ASoC: soc-pcm: serialize BE triggers")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/73018f3c-9769-72ea-0325-b3f8e2381e30@redhat.com
Link: https://lore.kernel.org/alsa-devel/9a0abddd-49e9-872d-2f00-a1697340f786@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220119155249.26754-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17d793f3ed53080dab6bbeabfc82de890c901001 upstream.
To fully utilize the BT polling/refresh rate, a few input events
are sent together to reduce event delay. This causes issue to the
timestamp generated by input_sync since all the events in the same
packet would pretty much have the same timestamp. This patch inserts
time interval to the events by averaging the total time used for
sending the packet.
This decision was mainly based on observing the actual time interval
between each BT polling. The interval doesn't seem to be constant,
due to the network and system environment. So, using solutions other
than averaging doesn't end up with valid timestamps.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08a46b4190d345544d04ce4fe2e1844b772b8535 upstream.
Some older tablets may not report physical maximum for X/Y
coordinates. Set a default to prevent undefined resolution.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://lore.kernel.org/r/20230409164229.29777-1-ping.cheng@wacom.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c032c37ac3ef3b7df30937c785ecc4da428edc0 upstream.
v1: Vmbo->shadow is used to back vram bo up when vram lost. So that we
should set shadow as vmbo->shadow to recover vmbo->bo
v2: Modify if(vmbo->shadow) shadow = vmbo->shadow as if(!vmbo->shadow)
continue;
Fixes: e18aaea733da ("drm/amdgpu: move shadow_list to amdgpu_bo_vm")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lin.Cao <lincao12@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
