IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In order to chip away at the "premature first" problem, we augment our
existing entropy accounting with more frequent reseedings at boot.
The idea is that at boot, we're getting entropy from various places, and
we're not very sure which of early boot entropy is good and which isn't.
Even when we're crediting the entropy, we're still not totally certain
that it's any good. Since boot is the one time (aside from a compromise)
that we have zero entropy, it's important that we shepherd entropy into
the crng fairly often.
At the same time, we don't want a "premature next" problem, whereby an
attacker can brute force individual bits of added entropy. In lieu of
going full-on Fortuna (for now), we can pick a simpler strategy of just
reseeding more often during the first 5 minutes after boot. This is
still bounded by the 256-bit entropy credit requirement, so we'll skip a
reseeding if we haven't reached that, but in case entropy /is/ coming
in, this ensures that it makes its way into the crng rather rapidly
during these early stages.
Ordinarily we reseed if the previous reseeding is 300 seconds old. This
commit changes things so that for the first 600 seconds of boot time, we
reseed if the previous reseeding is uptime / 2 seconds old. That means
that we'll reseed at the very least double the uptime of the previous
reseeding.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than sometimes checking `crng_init < 2`, we should always use the
crng_ready() macro, so that should we change anything later, it's
consistent. Additionally, that macro already has a likely() around it,
which means we don't need to open code our own likely() and unlikely()
annotations.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The current fast_mix() function is a piece of classic mailing list
crypto, where it just sort of sprung up by an anonymous author without a
lot of real analysis of what precisely it was accomplishing. As an ARX
permutation alone, there are some easily searchable differential trails
in it, and as a means of preventing malicious interrupts, it completely
fails, since it xors new data into the entire state every time. It can't
really be analyzed as a random permutation, because it clearly isn't,
and it can't be analyzed as an interesting linear algebraic structure
either, because it's also not that. There really is very little one can
say about it in terms of entropy accumulation. It might diffuse bits,
some of the time, maybe, we hope, I guess. But for the most part, it
fails to accomplish anything concrete.
As a reminder, the simple goal of add_interrupt_randomness() is to
simply accumulate entropy until ~64 interrupts have elapsed, and then
dump it into the main input pool, which uses a cryptographic hash.
It would be nice to have something cryptographically strong in the
interrupt handler itself, in case a malicious interrupt compromises a
per-cpu fast pool within the 64 interrupts / 1 second window, and then
inside of that same window somehow can control its return address and
cycle counter, even if that's a bit far fetched. However, with a very
CPU-limited budget, actually doing that remains an active research
project (and perhaps there'll be something useful for Linux to come out
of it). And while the abundance of caution would be nice, this isn't
*currently* the security model, and we don't yet have a fast enough
solution to make it our security model. Plus there's not exactly a
pressing need to do that. (And for the avoidance of doubt, the actual
cluster of 64 accumulated interrupts still gets dumped into our
cryptographically secure input pool.)
So, for now we are going to stick with the existing interrupt security
model, which assumes that each cluster of 64 interrupt data samples is
mostly non-malicious and not colluding with an infoleaker. With this as
our goal, we have a few more choices, simply aiming to accumulate
entropy, while discarding the least amount of it.
We know from <https://eprint.iacr.org/2019/198> that random oracles,
instantiated as computational hash functions, make good entropy
accumulators and extractors, which is the justification for using
BLAKE2s in the main input pool. As mentioned, we don't have that luxury
here, but we also don't have the same security model requirements,
because we're assuming that there aren't malicious inputs. A
pseudorandom function instance can approximately behave like a random
oracle, provided that the key is uniformly random. But since we're not
concerned with malicious inputs, we can pick a fixed key, which is not
secret, knowing that "nature" won't interact with a sufficiently chosen
fixed key by accident. So we pick a PRF with a fixed initial key, and
accumulate into it continuously, dumping the result every 64 interrupts
into our cryptographically secure input pool.
For this, we make use of SipHash-1-x on 64-bit and HalfSipHash-1-x on
32-bit, which are already in use in the kernel's hsiphash family of
functions and achieve the same performance as the function they replace.
It would be nice to do two rounds, but we don't exactly have the CPU
budget handy for that, and one round alone is already sufficient.
As mentioned, we start with a fixed initial key (zeros is fine), and
allow SipHash's symmetry breaking constants to turn that into a useful
starting point. Also, since we're dumping the result (or half of it on
64-bit so as to tax our hash function the same amount on all platforms)
into the cryptographically secure input pool, there's no point in
finalizing SipHash's output, since it'll wind up being finalized by
something much stronger. This means that all we need to do is use the
ordinary round function word-by-word, as normal SipHash does.
Simplified, the flow is as follows:
Initialize:
siphash_state_t state;
siphash_init(&state, key={0, 0, 0, 0});
Update (accumulate) on interrupt:
siphash_update(&state, interrupt_data_and_timing);
Dump into input pool after 64 interrupts:
blake2s_update(&input_pool, &state, sizeof(state) / 2);
The result of all of this is that the security model is unchanged from
before -- we assume non-malicious inputs -- yet we now implement that
model with a stronger argument. I would like to emphasize, again, that
the purpose of this commit is to improve the existing design, by making
it analyzable, without changing any fundamental assumptions. There may
well be value down the road in changing up the existing design, using
something cryptographically strong, or simply using a ring buffer of
samples rather than having a fast_mix() at all, or changing which and
how much data we collect each interrupt so that we can use something
linear, or a variety of other ideas. This commit does not invalidate the
potential for those in the future.
For example, in the future, if we're able to characterize the data we're
collecting on each interrupt, we may be able to inch toward information
theoretic accumulators. <https://eprint.iacr.org/2021/523> shows that `s
= ror32(s, 7) ^ x` and `s = ror64(s, 19) ^ x` make very good
accumulators for 2-monotone distributions, which would apply to
timestamp counters, like random_get_entropy() or jiffies, but would not
apply to our current combination of the two values, or to the various
function addresses and register values we mix in. Alternatively,
<https://eprint.iacr.org/2021/1002> shows that max-period linear
functions with no non-trivial invariant subspace make good extractors,
used in the form `s = f(s) ^ x`. However, this only works if the input
data is both identical and independent, and obviously a collection of
address values and counters fails; so it goes with theoretical papers.
Future directions here may involve trying to characterize more precisely
what we actually need to collect in the interrupt handler, and building
something specific around that.
However, as mentioned, the morass of data we're gathering at the
interrupt handler presently defies characterization, and so we use
SipHash for now, which works well and performs well.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Drivers such as WireGuard need to learn when VMs fork in order to clear
sessions. This commit provides a simple notifier_block for that, with a
register and unregister function. When no VM fork detection is compiled
in, this turns into a no-op, similar to how the power notifier works.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We previously rolled our own randomness readiness notifier, which only
has two users in the whole kernel. Replace this with a more standard
atomic notifier block that serves the same purpose with less code. Also
unexport the symbols, because no modules use it, only unconditional
builtins. The only drawback is that it's possible for a notification
handler returning the "stop" code to prevent further processing, but
given that there are only two users, and that we're unexporting this
anyway, that doesn't seem like a significant drawback for the
simplification we receive here.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Since add_vmfork_randomness() is only called from vmgenid.o, we can
guard it in CONFIG_VMGENID, similarly to how we do with
add_disk_randomness() and CONFIG_BLOCK. If we ever have multiple things
calling into add_vmfork_randomness(), we can add another shared Kconfig
symbol for that, but for now, this is good enough. Even though
add_vmfork_randomess() is a pretty small function, removing it means
that there are only calls to crng_reseed(false) and none to
crng_reseed(true), which means the compiler can constant propagate the
false, removing branches from crng_reseed() and its descendants.
Additionally, we don't even need the symbol to be exported if
CONFIG_VMGENID is not a module, so conditionalize that too.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When a VM forks, we must immediately mix in additional information to
the stream of random output so that two forks or a rollback don't
produce the same stream of random numbers, which could have catastrophic
cryptographic consequences. This commit adds a simple API, add_vmfork_
randomness(), for that, by force reseeding the crng.
This has the added benefit of also draining the entropy pool and setting
its timer back, so that any old entropy that was there prior -- which
could have already been used by a different fork, or generally gone
stale -- does not contribute to the accounting of the next 256 bits.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jann Horn <jannh@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We leave around these old sysctls for compatibility, and we keep them
"writable" for compatibility, but even after writing, we should keep
reporting the same value. This is consistent with how userspaces tend to
use sysctl_random_write_wakeup_bits, writing to it, and then later
reading from it and using the value.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This isn't used by anything or anywhere, but we can't delete it due to
compatibility. So at least give it the correct value of what it's
supposed to be instead of a garbage one.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This topic has come up countless times, and usually doesn't go anywhere.
This time I thought I'd bring it up with a slightly narrower focus,
updated for some developments over the last three years: we finally can
make /dev/urandom always secure, in light of the fact that our RNG is
now always seeded.
Ever since Linus' 50ee7529ec ("random: try to actively add entropy
rather than passively wait for it"), the RNG does a haveged-style jitter
dance around the scheduler, in order to produce entropy (and credit it)
for the case when we're stuck in wait_for_random_bytes(). How ever you
feel about the Linus Jitter Dance is beside the point: it's been there
for three years and usually gets the RNG initialized in a second or so.
As a matter of fact, this is what happens currently when people use
getrandom(). It's already there and working, and most people have been
using it for years without realizing.
So, given that the kernel has grown this mechanism for seeding itself
from nothing, and that this procedure happens pretty fast, maybe there's
no point any longer in having /dev/urandom give insecure bytes. In the
past we didn't want the boot process to deadlock, which was
understandable. But now, in the worst case, a second goes by, and the
problem is resolved. It seems like maybe we're finally at a point when
we can get rid of the infamous "urandom read hole".
The one slight drawback is that the Linus Jitter Dance relies on random_
get_entropy() being implemented. The first lines of try_to_generate_
entropy() are:
stack.now = random_get_entropy();
if (stack.now == random_get_entropy())
return;
On most platforms, random_get_entropy() is simply aliased to get_cycles().
The number of machines without a cycle counter or some other
implementation of random_get_entropy() in 2022, which can also run a
mainline kernel, and at the same time have a both broken and out of date
userspace that relies on /dev/urandom never blocking at boot is thought
to be exceedingly low. And to be clear: those museum pieces without
cycle counters will continue to run Linux just fine, and even
/dev/urandom will be operable just like before; the RNG just needs to be
seeded first through the usual means, which should already be the case
now.
On systems that really do want unseeded randomness, we already offer
getrandom(GRND_INSECURE), which is in use by, e.g., systemd for seeding
their hash tables at boot. Nothing in this commit would affect
GRND_INSECURE, and it remains the means of getting those types of random
numbers.
This patch goes a long way toward eliminating a long overdue userspace
crypto footgun. After several decades of endless user confusion, we will
finally be able to say, "use any single one of our random interfaces and
you'll be fine. They're all the same. It doesn't matter." And that, I
think, is really something. Finally all of those blog posts and
disagreeing forums and contradictory articles will all become correct
about whatever they happened to recommend, and along with it, a whole
class of vulnerabilities eliminated.
With very minimal downside, we're finally in a position where we can
make this change.
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Guo Ren <guoren@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Taking spinlocks from IRQ context is generally problematic for
PREEMPT_RT. That is, in part, why we take trylocks instead. However, a
spin_try_lock() is also problematic since another spin_lock() invocation
can potentially PI-boost the wrong task, as the spin_try_lock() is
invoked from an IRQ-context, so the task on CPU (random task or idle) is
not the actual owner.
Additionally, by deferring the crng pre-init loading to the worker, we
can use the cryptographic hash function rather than xor, which is
perhaps a meaningful difference when considering this data has only been
through the relatively weak fast_mix() function.
The biggest downside of this approach is that the pre-init loading is
now deferred until later, which means things that need random numbers
after interrupts are enabled, but before workqueues are running -- or
before this particular worker manages to run -- are going to get into
trouble. Hopefully in the real world, this window is rather small,
especially since this code won't run until 64 interrupts had occurred.
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
random_get_entropy() returns a cycles_t, not an unsigned long, which is
sometimes 64 bits on various 32-bit platforms, including x86.
Conversely, jiffies is always unsigned long. This commit fixes things to
use cycles_t for fields that use random_get_entropy(), named "cycles",
and unsigned long for fields that use jiffies, named "now". It's also
good to mix in a cycles_t and a jiffies in the same way for both
add_device_randomness and add_timer_randomness, rather than using xor in
one case. Finally, we unify the order of these volatile reads, always
reading the more precise cycles counter, and then jiffies, so that the
cycle counter is as close to the event as possible.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than hard coding various lengths, we can use the right constants.
Strings should be `char *` while buffers should be `u8 *`. Rather than
have a nonsensical and unused maxlength, just remove it. Finally, use
snprintf instead of sprintf, just out of good hygiene.
As well, remove the old comment about returning a binary UUID via the
binary sysctl syscall. That syscall was removed from the kernel in 5.5,
and actually, the "uuid_strategy" function and related infrastructure
for even serving it via the binary sysctl syscall was removed with
894d249115 ("sysctl drivers: Remove dead binary sysctl support") back
in 2.6.33.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The only time that we need to wake up /dev/random writers on
RNDCLEARPOOL/RNDZAPPOOL is when we're changing from a value that is
greater than or equal to POOL_MIN_BITS to zero, because if we're
changing from below POOL_MIN_BITS to zero, the writers are already
unblocked.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When the interrupt handler does not have a valid cycle counter, it calls
get_reg() to read a register from the irq stack, in round-robin.
Currently it does this assuming that registers are 32-bit. This is
_probably_ the case, and probably all platforms without cycle counters
are in fact 32-bit platforms. But maybe not, and either way, it's not
quite correct. This commit fixes that to deal with `unsigned long`
rather than `u32`.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
For the irq randomness fast pool, rather than having to use expensive
atomics, which were visibly the most expensive thing in the entire irq
handler, simply take care of the extreme edge case of resetting count to
zero in the cpuhp online handler, just after workqueues have been
reenabled. This simplifies the code a bit and lets us use vanilla
variables rather than atomics, and performance should be improved.
As well, very early on when the CPU comes up, while interrupts are still
disabled, we clear out the per-cpu crng and its batches, so that it
always starts with fresh randomness.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This has no real functional change, as crng_pre_init_inject() (and
before that, crng_slow_init()) always checks for == 0, not >= 2. So
correct the outer unlocked change to reflect that. Before this used
crng_ready(), which was not correct.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
crng_fast_load() and crng_slow_load() have different semantics:
- crng_fast_load() xors and accounts with crng_init_cnt.
- crng_slow_load() hashes and doesn't account.
However add_hwgenerator_randomness() can afford to hash (it's called
from a kthread), and it should account. Additionally, ones that can
afford to hash don't need to take a trylock but can take a normal lock.
So, we combine these into one function, crng_pre_init_inject(), which
allows us to control these in a uniform way. This will make it simpler
later to simplify this all down when the time comes for that.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Since rand_initialize() is run while interrupts are still off and
nothing else is running, we don't need to repeatedly take and release
the pool spinlock, especially in the RDSEED loop.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
On PREEMPT_RT, it's problematic to take spinlocks from hard irq
handlers. We can fix this by deferring to a workqueue the dumping of
the fast pool into the input pool.
We accomplish this with some careful rules on fast_pool->count:
- When it's incremented to >= 64, we schedule the work.
- If the top bit is set, we never schedule the work, even if >= 64.
- The worker is responsible for setting it back to 0 when it's done.
There are two small issues around using workqueues for this purpose that
we work around.
The first issue is that mix_interrupt_randomness() might be migrated to
another CPU during CPU hotplug. This issue is rectified by checking that
it hasn't been migrated (after disabling irqs). If it has been migrated,
then we set the count to zero, so that when the CPU comes online again,
it can requeue the work. As part of this, we switch to using an
atomic_t, so that the increment in the irq handler doesn't wipe out the
zeroing if the CPU comes back online while this worker is running.
The second issue is that, though relatively minor in effect, we probably
want to make sure we get a consistent view of the pool onto the stack,
in case it's interrupted by an irq while reading. To do this, we don't
reenable irqs until after the copy. There are only 18 instructions
between the cli and sti, so this is a pretty tiny window.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that we've re-documented the various sections, we can remove the
outdated text here and replace it with a high-level overview.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the sysctl-focused functions into the sixth labeled
section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the userspace read/write-focused functions into the
fifth labeled section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the entropy collection-focused functions into the
fourth labeled section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the entropy extraction-focused functions into the
third labeled section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the crng-focused functions into the second labeled
section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the readiness waiting-focused functions into the first
labeled section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is purely cosmetic. Future work involves figuring out which of
these headers we need and which we don't.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In preparation for separating responsibilities, break out the entropy
count management part of crng_reseed() into its own function.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In the irq handler, we fill out 16 bytes differently on 32-bit and
64-bit platforms, and for 32-bit vs 64-bit cycle counters, which doesn't
always correspond with the bitness of the platform. Whether or not you
like this strangeness, it is a matter of fact. But it might not be a
fact you well realized until now, because the code that loaded the irq
info into 4 32-bit words was quite confusing. Instead, this commit
makes everything explicit by having separate (compile-time) branches for
32-bit and 64-bit types.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Convert the current license into the SPDX notation of "(GPL-2.0 OR
BSD-3-Clause)". This infers GPL-2.0 from the text "ALTERNATIVELY, this
product may be distributed under the terms of the GNU General Public
License, in which case the provisions of the GPL are required INSTEAD OF
the above restrictions" and it infers BSD-3-Clause from the verbatim
BSD 3 clause license in the file.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
These explicit tracepoints aren't really used and show sign of aging.
It's work to keep these up to date, and before I attempted to keep them
up to date, they weren't up to date, which indicates that they're not
really used. These days there are better ways of introspecting anyway.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
With tools like kbench9000 giving more finegrained responses, and this
basically never having been used ever since it was initially added,
let's just get rid of this. There *is* still work to be done on the
interrupt handler, but this really isn't the way it's being developed.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that we have an explicit base_crng generation counter, we don't need
a separate one for batched entropy. Rather, we can just move the
generation forward every time we change crng_init state or update the
base_crng key.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
crng_init is protected by primary_crng->lock. Therefore, we need
to hold this lock when increasing crng_init to 2. As we shouldn't
hold this lock for too long, only hold it for those parts which
require protection.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This buffer may contain entropic data that shouldn't stick around longer
than needed, so zero out the temporary buffer at the end of write_pool().
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In 79a8468747 ("random: check for increase of entropy_count because of
signed conversion"), a number of checks were added around what values
were passed to account(), because account() was doing fancy fixed point
fractional arithmetic, and a user had some ability to pass large values
directly into it. One of things in that commit was limiting those values
to INT_MAX >> 6. The first >> 3 was for bytes to bits, and the next >> 3
was for bits to 1/8 fractional bits.
However, for several years now, urandom reads no longer touch entropy
accounting, and so this check serves no purpose. The current flow is:
urandom_read_nowarn()-->get_random_bytes_user()-->chacha20_block()
Of course, we don't want that size_t to be truncated when adding it into
the ssize_t. But we arrive at urandom_read_nowarn() in the first place
either via ordinary fops, which limits reads to MAX_RW_COUNT, or via
getrandom() which limits reads to INT_MAX.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We've been using a flurry of int, unsigned int, size_t, and ssize_t.
Let's unify all of this into size_t where it makes sense, as it does in
most places, and leave ssize_t for return values with possible errors.
In addition, keeping with the convention of other functions in this
file, functions that are dealing with raw bytes now take void *
consistently instead of a mix of that and u8 *, because much of the time
we're actually passing some other structure that is then interpreted as
bytes by the function.
We also take the opportunity to fix the outdated and incorrect comment
in get_random_bytes_arch().
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Since we have a hash function that's really fast, and the goal of
crng_slow_load() is reportedly to "touch all of the crng's state", we
can just hash the old state together with the new state and call it a
day. This way we dont need to reason about another LFSR or worry about
various attacks there. This code is only ever used at early boot and
then never again.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than the clunky NUMA full ChaCha state system we had prior, this
commit is closer to the original "fast key erasure RNG" proposal from
<https://blog.cr.yp.to/20170723-random.html>, by simply treating ChaCha
keys on a per-cpu basis.
All entropy is extracted to a base crng key of 32 bytes. This base crng
has a birthdate and a generation counter. When we go to take bytes from
the crng, we first check if the birthdate is too old; if it is, we
reseed per usual. Then we start working on a per-cpu crng.
This per-cpu crng makes sure that it has the same generation counter as
the base crng. If it doesn't, it does fast key erasure with the base
crng key and uses the output as its new per-cpu key, and then updates
its local generation counter. Then, using this per-cpu state, we do
ordinary fast key erasure. Half of this first block is used to overwrite
the per-cpu crng key for the next call -- this is the fast key erasure
RNG idea -- and the other half, along with the ChaCha state, is returned
to the caller. If the caller desires more than this remaining half, it
can generate more ChaCha blocks, unlocked, using the now detached ChaCha
state that was just returned. Crypto-wise, this is more or less what we
were doing before, but this simply makes it more explicit and ensures
that we always have backtrack protection by not playing games with a
shared block counter.
The flow looks like this:
──extract()──► base_crng.key ◄──memcpy()───┐
│ │
└──chacha()──────┬─► new_base_key
└─► crngs[n].key ◄──memcpy()───┐
│ │
└──chacha()───┬─► new_key
└─► random_bytes
│
└────►
There are a few hairy details around early init. Just as was done
before, prior to having gathered enough entropy, crng_fast_load() and
crng_slow_load() dump bytes directly into the base crng, and when we go
to take bytes from the crng, in that case, we're doing fast key erasure
with the base crng rather than the fast unlocked per-cpu crngs. This is
fine as that's only the state of affairs during very early boot; once
the crng initializes we never use these paths again.
In the process of all this, the APIs into the crng become a bit simpler:
we have get_random_bytes(buf, len) and get_random_bytes_user(buf, len),
which both do what you'd expect. All of the details of fast key erasure
and per-cpu selection happen only in a very short critical section of
crng_make_state(), which selects the right per-cpu key, does the fast
key erasure, and returns a local state to the caller's stack. So, we no
longer have a need for a separate backtrack function, as this happens
all at once here. The API then allows us to extend backtrack protection
to batched entropy without really having to do much at all.
The result is a bit simpler than before and has fewer foot guns. The
init time state machine also gets a lot simpler as we don't need to wait
for workqueues to come online and do deferred work. And the multi-core
performance should be increased significantly, by virtue of having hardly
any locking on the fast path.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
During crng_init == 0, we never credit entropy in add_interrupt_
randomness(), but instead dump it directly into the primary_crng. That's
fine, except for the fact that we then wind up throwing away that
entropy later when we switch to extracting from the input pool and
xoring into (and later in this series overwriting) the primary_crng key.
The two other early init sites -- add_hwgenerator_randomness()'s use
crng_fast_load() and add_device_ randomness()'s use of crng_slow_load()
-- always additionally give their inputs to the input pool. But not
add_interrupt_randomness().
This commit fixes that shortcoming by calling mix_pool_bytes() after
crng_fast_load() in add_interrupt_randomness(). That's partially
verboten on PREEMPT_RT, where it implies taking spinlock_t from an IRQ
handler. But this also only happens during early boot and then never
again after that. Plus it's a trylock so it has the same considerations
as calling crng_fast_load(), which we're already using.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Suggested-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Continuing the reasoning of "random: ensure early RDSEED goes through
mixer on init", we don't want RDRAND interacting with anything without
going through the mixer function, as a backdoored CPU could presumably
cancel out data during an xor, which it'd have a harder time doing when
being forced through a cryptographic hash function. There's actually no
need at all to be calling RDRAND in write_pool(), because before we
extract from the pool, we always do so with 32 bytes of RDSEED hashed in
at that stage. Xoring at this stage is needless and introduces a minor
liability.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Continuing the reasoning of "random: use RDSEED instead of RDRAND in
entropy extraction" from this series, at init time we also don't want to
be xoring RDSEED directly into the crng. Instead it's safer to put it
into our entropy collector and then re-extract it, so that it goes
through a hash function with preimage resistance. As a matter of hygiene,
we also order these now so that the RDSEED byte are hashed in first,
followed by the bytes that are likely more predictable (e.g. utsname()).
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is a preparatory commit for the following one. We simply inline the
various functions that rand_initialize() calls that have no other
callers. The compiler was doing this anyway before. Doing this will
allow us to reorganize this after. We can then move the trust_cpu and
parse_trust_cpu definitions a bit closer to where they're actually used,
which makes the code easier to read.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
As the comment said, this is indeed a "hack". Since it was introduced,
it's been a constant state machine nightmare, with lots of subtle early
boot issues and a wildly complex set of machinery to keep everything in
sync. Rather than continuing to play whack-a-mole with this approach,
this commit simply removes it entirely. This commit is preparation for
"random: use simpler fast key erasure flow on per-cpu keys" in this
series, which introduces a simpler (and faster) mechanism to accomplish
the same thing.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When /dev/random was directly connected with entropy extraction, without
any expansion stage, extract_buf() was called for every 10 bytes of data
read from /dev/random. For that reason, RDRAND was used rather than
RDSEED. At the same time, crng_reseed() was still only called every 5
minutes, so there RDSEED made sense.
Those olden days were also a time when the entropy collector did not use
a cryptographic hash function, which meant most bets were off in terms
of real preimage resistance. For that reason too it didn't matter
_that_ much whether RDSEED was mixed in before or after entropy
extraction; both choices were sort of bad.
But now we have a cryptographic hash function at work, and with that we
get real preimage resistance. We also now only call extract_entropy()
every 5 minutes, rather than every 10 bytes. This allows us to do two
important things.
First, we can switch to using RDSEED in extract_entropy(), as Dominik
suggested. Second, we can ensure that RDSEED input always goes into the
cryptographic hash function with other things before being used
directly. This eliminates a category of attacks in which the CPU knows
the current state of the crng and knows that we're going to xor RDSEED
into it, and so it computes a malicious RDSEED. By going through our
hash function, it would require the CPU to compute a preimage on the
fly, which isn't going to happen.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Suggested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
crng_init is protected by primary_crng->lock, so keep holding that lock
when incrementing crng_init from 0 to 1 in crng_fast_load(). The call to
pr_notice() can wait until the lock is released; this code path cannot
be reached twice, as crng_fast_load() aborts early if crng_init > 0.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than use spinlocks to protect batched entropy, we can instead
disable interrupts locally, since we're dealing with per-cpu data, and
manage resets with a basic generation counter. At the same time, we
can't quite do this on PREEMPT_RT, where we still want spinlocks-as-
mutexes semantics. So we use a local_lock_t, which provides the right
behavior for each. Because this is a per-cpu lock, that generation
counter is still doing the necessary CPU-to-CPU communication.
This should improve performance a bit. It will also fix the linked splat
that Jonathan received with a PROVE_RAW_LOCK_NESTING=y.
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/lkml/YfMa0QgsjCVdRAvJ@latitude/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The primary_crng is always reseeded from the input_pool, while the NUMA
crngs are always reseeded from the primary_crng. Remove the redundant
'use_input_pool' parameter from crng_reseed() and just directly check
whether the crng is the primary_crng.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is called from various hwgenerator drivers, so rather than having
one "safe" version for userspace and one "unsafe" version for the
kernel, just make everything safe; the checks are cheap and sensible to
have anyway.
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that POOL_BITS == POOL_MIN_BITS, we must unconditionally wake up
entropy writers after every extraction. Therefore there's no point of
write_wakeup_threshold, so we can move it to the dustbin of unused
compatibility sysctls. While we're at it, we can fix a small comparison
where we were waking up after <= min rather than < min.
Cc: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
30e37ec516 ("random: account for entropy loss due to overwrites")
assumed that adding new entropy to the LFSR pool probabilistically
cancelled out old entropy there, so entropy was credited asymptotically,
approximating Shannon entropy of independent sources (rather than a
stronger min-entropy notion) using 1/8th fractional bits and replacing
a constant 2-2/√𝑒 term (~0.786938) with 3/4 (0.75) to slightly
underestimate it. This wasn't superb, but it was perhaps better than
nothing, so that's what was done. Which entropy specifically was being
cancelled out and how much precisely each time is hard to tell, though
as I showed with the attack code in my previous commit, a motivated
adversary with sufficient information can actually cancel out
everything.
Since we're no longer using an LFSR for entropy accumulation, this
probabilistic cancellation is no longer relevant. Rather, we're now
using a computational hash function as the accumulator and we've
switched to working in the random oracle model, from which we can now
revisit the question of min-entropy accumulation, which is done in
detail in <https://eprint.iacr.org/2019/198>.
Consider a long input bit string that is built by concatenating various
smaller independent input bit strings. Each one of these inputs has a
designated min-entropy, which is what we're passing to
credit_entropy_bits(h). When we pass the concatenation of these to a
random oracle, it means that an adversary trying to receive back the
same reply as us would need to become certain about each part of the
concatenated bit string we passed in, which means becoming certain about
all of those h values. That means we can estimate the accumulation by
simply adding up the h values in calls to credit_entropy_bits(h);
there's no probabilistic cancellation at play like there was said to be
for the LFSR. Incidentally, this is also what other entropy accumulators
based on computational hash functions do as well.
So this commit replaces credit_entropy_bits(h) with essentially `total =
min(POOL_BITS, total + h)`, done with a cmpxchg loop as before.
What if we're wrong and the above is nonsense? It's not, but let's
assume we don't want the actual _behavior_ of the code to change much.
Currently that behavior is not extracting from the input pool until it
has 128 bits of entropy in it. With the old algorithm, we'd hit that
magic 128 number after roughly 256 calls to credit_entropy_bits(1). So,
we can retain more or less the old behavior by waiting to extract from
the input pool until it hits 256 bits of entropy using the new code. For
people concerned about this change, it means that there's not that much
practical behavioral change. And for folks actually trying to model
the behavior rigorously, it means that we have an even higher margin
against attacks.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Our pool is 256 bits, and we only ever use all of it or don't use it at
all, which is decided by whether or not it has at least 128 bits in it.
So we can drastically simplify the accounting and cmpxchg loop to do
exactly this. While we're at it, we move the minimum bit size into a
constant so it can be shared between the two places where it matters.
The reason we want any of this is for the case in which an attacker has
compromised the current state, and then bruteforces small amounts of
entropy added to it. By demanding a particular minimum amount of entropy
be present before reseeding, we make that bruteforcing difficult.
Note that this rationale no longer includes anything about /dev/random
blocking at the right moment, since /dev/random no longer blocks (except
for at ~boot), but rather uses the crng. In a former life, /dev/random
was different and therefore required a more nuanced account(), but this
is no longer.
Behaviorally, nothing changes here. This is just a simplification of
the code.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The current 4096-bit LFSR used for entropy collection had a few
desirable attributes for the context in which it was created. For
example, the state was huge, which meant that /dev/random would be able
to output quite a bit of accumulated entropy before blocking. It was
also, in its time, quite fast at accumulating entropy byte-by-byte,
which matters given the varying contexts in which mix_pool_bytes() is
called. And its diffusion was relatively high, which meant that changes
would ripple across several words of state rather quickly.
However, it also suffers from a few security vulnerabilities. In
particular, inputs learned by an attacker can be undone, but moreover,
if the state of the pool leaks, its contents can be controlled and
entirely zeroed out. I've demonstrated this attack with this SMT2
script, <https://xn--4db.cc/5o9xO8pb>, which Boolector/CaDiCal solves in
a matter of seconds on a single core of my laptop, resulting in little
proof of concept C demonstrators such as <https://xn--4db.cc/jCkvvIaH/c>.
For basically all recent formal models of RNGs, these attacks represent
a significant cryptographic flaw. But how does this manifest
practically? If an attacker has access to the system to such a degree
that he can learn the internal state of the RNG, arguably there are
other lower hanging vulnerabilities -- side-channel, infoleak, or
otherwise -- that might have higher priority. On the other hand, seed
files are frequently used on systems that have a hard time generating
much entropy on their own, and these seed files, being files, often leak
or are duplicated and distributed accidentally, or are even seeded over
the Internet intentionally, where their contents might be recorded or
tampered with. Seen this way, an otherwise quasi-implausible
vulnerability is a bit more practical than initially thought.
Another aspect of the current mix_pool_bytes() function is that, while
its performance was arguably competitive for the time in which it was
created, it's no longer considered so. This patch improves performance
significantly: on a high-end CPU, an i7-11850H, it improves performance
of mix_pool_bytes() by 225%, and on a low-end CPU, a Cortex-A7, it
improves performance by 103%.
This commit replaces the LFSR of mix_pool_bytes() with a straight-
forward cryptographic hash function, BLAKE2s, which is already in use
for pool extraction. Universal hashing with a secret seed was considered
too, something along the lines of <https://eprint.iacr.org/2013/338>,
but the requirement for a secret seed makes for a chicken & egg problem.
Instead we go with a formally proven scheme using a computational hash
function, described in sections 5.1, 6.4, and B.1.8 of
<https://eprint.iacr.org/2019/198>.
BLAKE2s outputs 256 bits, which should give us an appropriate amount of
min-entropy accumulation, and a wide enough margin of collision
resistance against active attacks. mix_pool_bytes() becomes a simple
call to blake2s_update(), for accumulation, while the extraction step
becomes a blake2s_final() to generate a seed, with which we can then do
a HKDF-like or BLAKE2X-like expansion, the first part of which we fold
back as an init key for subsequent blake2s_update()s, and the rest we
produce to the caller. This then is provided to our CRNG like usual. In
that expansion step, we make opportunistic use of 32 bytes of RDRAND
output, just as before. We also always reseed the crng with 32 bytes,
unconditionally, or not at all, rather than sometimes with 16 as before,
as we don't win anything by limiting beyond the 16 byte threshold.
Going for a hash function as an entropy collector is a conservative,
proven approach. The result of all this is a much simpler and much less
bespoke construction than what's there now, which not only plugs a
vulnerability but also improves performance considerably.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
crng_finalize_init() returns instantly if it is called for another pool
than primary_crng. The test whether crng_finalize_init() is still required
can be moved to the relevant caller in crng_reseed(), and
crng_need_final_init can be reset to false if crng_finalize_init() is
called with workqueues ready. Then, no previous callsite will call
crng_finalize_init() unless it is needed, and we can get rid of the
superfluous function parameter.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Both crng_initialize_primary() and crng_init_try_arch_early() are
only called for the primary_pool. Accessing it directly instead of
through a function parameter simplifies the code.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When account() is called, and the amount of entropy dips below
random_write_wakeup_bits, we wake up the random writers, so that they
can write some more in. However, the RNDZAPENTCNT/RNDCLEARPOOL ioctl
sets the entropy count to zero -- a potential reduction just like
account() -- but does not unblock writers. This commit adds the missing
logic to that ioctl to unblock waiting writers.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The rngd kernel thread may sleep indefinitely if the entropy count is
kept above random_write_wakeup_bits by other entropy sources. To make
best use of multiple sources of randomness, mix entropy from hardware
RNGs into the pool at least once within CRNG_RESEED_INTERVAL.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the random sysctls to their own file and use
register_sysctl_init().
[mcgrof@kernel.org: commit log update to justify the move]
Link: https://lkml.kernel.org/r/20211124231435.1445213-3-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that have_bytes is never modified, we can simplify this function.
First, we move the check for negative entropy_count to be first. That
ensures that subsequent reads of this will be non-negative. Then,
have_bytes and ibytes can be folded into their one use site in the
min_t() function.
Suggested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is an old driver that has seen a lot of different eras of kernel
coding style. In an effort to make it easier to code for, unify the
coding style around the current norm, by accepting some of -- but
certainly not all of -- the suggestions from clang-format. This should
remove ambiguity in coding style, especially with regards to spacing,
when code is being changed or amended. Consequently it also makes code
review easier on the eyes, following one uniform style rather than
several.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This gets rid of another abstraction we no longer need. It would be nice
if we could instead make pool an array rather than a pointer, but the
latent entropy plugin won't be able to do its magic in that case. So
instead we put all accesses to the input pool's actual data through the
input_pool_data array directly.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The entropy estimator is calculated in terms of 1/8 bits, which means
there are various constants where things are shifted by 3. Move these
into our pool info enum with the other relevant constants. While we're
at it, move an English assertion about sizes into a proper BUILD_BUG_ON
so that the compiler can ensure this invariant.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The other pool constants are prepended with POOL_, but not these last
ones. Rename them. This will then let us move them into the enum in the
following commit.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We already had the POOL_* constants, so deduplicate the older INPUT_POOL
ones. As well, fold EXTRACT_SIZE into the poolinfo enum, since it's
related.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We no longer have an output pool. Rather, we have just a wakeup bits
threshold for /dev/random reads, presumably so that processes don't
hang. This value, random_write_wakeup_bits, is configurable anyway. So
all the no longer usefully named OUTPUT_POOL constants were doing was
setting a reasonable default for random_write_wakeup_bits. This commit
gets rid of the constants and just puts it all in the default value of
random_write_wakeup_bits.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Originally, the RNG used several pools, so having things abstracted out
over a generic entropy_store object made sense. These days, there's only
one input pool, and then an uneven mix of usage via the abstraction and
usage via &input_pool. Rather than this uneasy mixture, just get rid of
the abstraction entirely and have things always use the global. This
simplifies the code and makes reading it a bit easier.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This argument is always set to zero, as a result of us not caring about
keeping a certain amount reserved in the pool these days. So just remove
it and cleanup the function signatures.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
There were a few things added under the "if (fips_enabled)" banner,
which never really got completed, and the FIPS people anyway are
choosing a different direction. Rather than keep around this halfbaked
code, get rid of it so that we can focus on a single design of the RNG
rather than two designs.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than using the userspace type, __uXX, switch to using uXX. And
rather than using variously chosen `char *` or `unsigned char *`, use
`u8 *` uniformly for things that aren't strings, in the case where we
are doing byte-by-byte traversal.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that we're only using one polynomial, we can cleanup its
representation into constants, instead of passing around pointers
dynamically to select different polynomials. This improves the codegen
and makes the code a bit more straightforward.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
At the moment, urandom_read() (used for /dev/urandom) resets crng_init_cnt
to zero when it is called at crng_init<2. This is inconsistent: We do it
for /dev/urandom reads, but not for the equivalent
getrandom(GRND_INSECURE).
(And worse, as Jason pointed out, we're only doing this as long as
maxwarn>0.)
crng_init_cnt is only read in crng_fast_load(); it is relevant at
crng_init==0 for determining when to switch to crng_init==1 (and where in
the RNG state array to write).
As far as I understand:
- crng_init==0 means "we have nothing, we might just be returning the same
exact numbers on every boot on every machine, we don't even have
non-cryptographic randomness; we should shove every bit of entropy we
can get into the RNG immediately"
- crng_init==1 means "well we have something, it might not be
cryptographic, but at least we're not gonna return the same data every
time or whatever, it's probably good enough for TCP and ASLR and stuff;
we now have time to build up actual cryptographic entropy in the input
pool"
- crng_init==2 means "this is supposed to be cryptographically secure now,
but we'll keep adding more entropy just to be sure".
The current code means that if someone is pulling data from /dev/urandom
fast enough at crng_init==0, we'll keep resetting crng_init_cnt, and we'll
never make forward progress to crng_init==1. It seems to be intended to
prevent an attacker from bruteforcing the contents of small individual RNG
inputs on the way from crng_init==0 to crng_init==1, but that's misguided;
crng_init==1 isn't supposed to provide proper cryptographic security
anyway, RNG users who care about getting secure RNG output have to wait
until crng_init==2.
This code was inconsistent, and it probably made things worse - just get
rid of it.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
RDRAND is not fast. RDRAND is actually quite slow. We've known this for
a while, which is why functions like get_random_u{32,64} were converted
to use batching of our ChaCha-based CRNG instead.
Yet CRNG extraction still includes a call to RDRAND, in the hot path of
every call to get_random_bytes(), /dev/urandom, and getrandom(2).
This call to RDRAND here seems quite superfluous. CRNG is already
extracting things based on a 256-bit key, based on good entropy, which
is then reseeded periodically, updated, backtrack-mutated, and so
forth. The CRNG extraction construction is something that we're already
relying on to be secure and solid. If it's not, that's a serious
problem, and it's unlikely that mixing in a measly 32 bits from RDRAND
is going to alleviate things.
And in the case where the CRNG doesn't have enough entropy yet, we're
already initializing the ChaCha key row with RDRAND in
crng_init_try_arch_early().
Removing the call to RDRAND improves performance on an i7-11850H by
370%. In other words, the vast majority of the work done by
extract_crng() prior to this commit was devoted to fetching 32 bits of
RDRAND.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Previously, the ChaCha constants for the primary pool were only
initialized in crng_initialize_primary(), called by rand_initialize().
However, some randomness is actually extracted from the primary pool
beforehand, e.g. by kmem_cache_create(). Therefore, statically
initialize the ChaCha constants for the primary pool.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than an awkward combination of ifdefs and __maybe_unused, we can
ensure more source gets parsed, regardless of the configuration, by
using IS_ENABLED for the CONFIG_NUMA conditional code. This makes things
cleaner and easier to follow.
I've confirmed that on !CONFIG_NUMA, we don't wind up with excess code
by accident; the generated object file is the same.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We print out "crng init done" for !TRUST_CPU, so we should also print
out the same for TRUST_CPU.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If we're trusting bootloader randomness, crng_fast_load() is called by
add_hwgenerator_randomness(), which sets us to crng_init==1. However,
usually it is only called once for an initial 64-byte push, so bootloader
entropy will not mix any bytes into the input pool. So it's conceivable
that crng_init==1 when crng_initialize_primary() is called later, but
then the input pool is empty. When that happens, the crng state key will
be overwritten with extracted output from the empty input pool. That's
bad.
In contrast, if we're not trusting bootloader randomness, we call
crng_slow_load() *and* we call mix_pool_bytes(), so that later
crng_initialize_primary() isn't drawing on nothing.
In order to prevent crng_initialize_primary() from extracting an empty
pool, have the trusted bootloader case mirror that of the untrusted
bootloader case, mixing the input into the pool.
[linux@dominikbrodowski.net: rewrite commit message]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When crng_fast_load() is called by add_hwgenerator_randomness(), we
currently will advance to crng_init==1 once we've acquired 64 bytes, and
then throw away the rest of the buffer. Usually, that is not a problem:
When add_hwgenerator_randomness() gets called via EFI or DT during
setup_arch(), there won't be any IRQ randomness. Therefore, the 64 bytes
passed by EFI exactly matches what is needed to advance to crng_init==1.
Usually, DT seems to pass 64 bytes as well -- with one notable exception
being kexec, which hands over 128 bytes of entropy to the kexec'd kernel.
In that case, we'll advance to crng_init==1 once 64 of those bytes are
consumed by crng_fast_load(), but won't continue onward feeding in bytes
to progress to crng_init==2. This commit fixes the issue by feeding
any leftover bytes into the next phase in add_hwgenerator_randomness().
[linux@dominikbrodowski.net: rewrite commit message]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If the bootloader supplies sufficient material and crng_reseed() is called
very early on, but not too early that wqs aren't available yet, then we
might transition to crng_init==2 before rand_initialize()'s call to
crng_initialize_primary() made. Then, when crng_initialize_primary() is
called, if we're trusting the CPU's RDRAND instructions, we'll
needlessly reinitialize the RNG and emit a message about it. This is
mostly harmless, as numa_crng_init() will allocate and then free what it
just allocated, and excessive calls to invalidate_batched_entropy()
aren't so harmful. But it is funky and the extra message is confusing,
so avoid the re-initialization all together by checking for crng_init <
2 in crng_initialize_primary(), just as we already do in crng_reseed().
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Currently, if CONFIG_RANDOM_TRUST_BOOTLOADER is enabled, multiple calls
to add_bootloader_randomness() are broken and can cause a NULL pointer
dereference, as noted by Ivan T. Ivanov. This is not only a hypothetical
problem, as qemu on arm64 may provide bootloader entropy via EFI and via
devicetree.
On the first call to add_hwgenerator_randomness(), crng_fast_load() is
executed, and if the seed is long enough, crng_init will be set to 1.
On subsequent calls to add_bootloader_randomness() and then to
add_hwgenerator_randomness(), crng_fast_load() will be skipped. Instead,
wait_event_interruptible() and then credit_entropy_bits() will be called.
If the entropy count for that second seed is large enough, that proceeds
to crng_reseed().
However, both wait_event_interruptible() and crng_reseed() depends
(at least in numa_crng_init()) on workqueues. Therefore, test whether
system_wq is already initialized, which is a sufficient indicator that
workqueue_init_early() has progressed far enough.
If we wind up hitting the !system_wq case, we later want to do what
would have been done there when wqs are up, so set a flag, and do that
work later from the rand_initialize() call.
Reported-by: Ivan T. Ivanov <iivanov@suse.de>
Fixes: 18b915ac6b ("efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness")
Cc: stable@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
[Jason: added crng_need_done state and related logic.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
By using `char` instead of `unsigned char`, certain platforms will sign
extend the byte when `w = rol32(*bytes++, input_rotate)` is called,
meaning that bit 7 is overrepresented when mixing. This isn't a real
problem (unless the mixer itself is already broken) since it's still
invertible, but it's not quite correct either. Fix this by using an
explicit unsigned type.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This commit addresses one of the lower hanging fruits of the RNG: its
usage of SHA1.
BLAKE2s is generally faster, and certainly more secure, than SHA1, which
has [1] been [2] really [3] very [4] broken [5]. Additionally, the
current construction in the RNG doesn't use the full SHA1 function, as
specified, and allows overwriting the IV with RDRAND output in an
undocumented way, even in the case when RDRAND isn't set to "trusted",
which means potential malicious IV choices. And its short length means
that keeping only half of it secret when feeding back into the mixer
gives us only 2^80 bits of forward secrecy. In other words, not only is
the choice of hash function dated, but the use of it isn't really great
either.
This commit aims to fix both of these issues while also keeping the
general structure and semantics as close to the original as possible.
Specifically:
a) Rather than overwriting the hash IV with RDRAND, we put it into
BLAKE2's documented "salt" and "personal" fields, which were
specifically created for this type of usage.
b) Since this function feeds the full hash result back into the
entropy collector, we only return from it half the length of the
hash, just as it was done before. This increases the
construction's forward secrecy from 2^80 to a much more
comfortable 2^128.
c) Rather than using the raw "sha1_transform" function alone, we
instead use the full proper BLAKE2s function, with finalization.
This also has the advantage of supplying 16 bytes at a time rather than
SHA1's 10 bytes, which, in addition to having a faster compression
function to begin with, means faster extraction in general. On an Intel
i7-11850H, this commit makes initial seeding around 131% faster.
BLAKE2s itself has the nice property of internally being based on the
ChaCha permutation, which the RNG is already using for expansion, so
there shouldn't be any issue with newness, funkiness, or surprising CPU
behavior, since it's based on something already in use.
[1] https://eprint.iacr.org/2005/010.pdf
[2] https://www.iacr.org/archive/crypto2005/36210017/36210017.pdf
[3] https://eprint.iacr.org/2015/967.pdf
[4] https://shattered.io/static/shattered.pdf
[5] https://www.usenix.org/system/files/sec20-leurent.pdf
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
_extract_crng() does plain loads of crng->init_time and
crng_global_init_time, which causes undefined behavior if
crng_reseed() and RNDRESEEDCRNG modify these corrently.
Use READ_ONCE() and WRITE_ONCE() to make the behavior defined.
Don't fix the race on crng->init_time by protecting it with crng->lock,
since it's not a problem for duplicate reseedings to occur. I.e., the
lockless access with READ_ONCE() is fine.
Fixes: d848e5f8e1 ("random: add new ioctl RNDRESEEDCRNG")
Fixes: e192be9d9a ("random: replace non-blocking pool with a Chacha20-based CRNG")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
extract_crng() and crng_backtrack_protect() load crng_node_pool with a
plain load, which causes undefined behavior if do_numa_crng_init()
modifies it concurrently.
Fix this by using READ_ONCE(). Note: as per the previous discussion
https://lore.kernel.org/lkml/20211219025139.31085-1-ebiggers@kernel.org/T/#u,
READ_ONCE() is believed to be sufficient here, and it was requested that
it be used here instead of smp_load_acquire().
Also change do_numa_crng_init() to set crng_node_pool using
cmpxchg_release() instead of mb() + cmpxchg(), as the former is
sufficient here but is more lightweight.
Fixes: 1e7f583af6 ("random: make /dev/urandom scalable for silly userspace programs")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Since commit
ee3e00e9e7 ("random: use registers from interrupted code for CPU's w/o a cycle counter")
the irq_flags argument is no longer used.
Remove unused irq_flags.
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The section at the top of random.c which documents the input functions
available does not document add_hwgenerator_randomness() which might lead
a reader to overlook it. Add a brief note about it.
Signed-off-by: Mark Brown <broonie@kernel.org>
[Jason: reorganize position of function in doc comment and also document
add_bootloader_randomness() while we're at it.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Remove some dead code that was left over following commit 90ea1c6436
("random: remove the blocking pool").
Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On big endian CPUs, the ChaCha20-based CRNG is using the wrong
endianness for the ChaCha20 constants.
This doesn't matter cryptographically, but technically it means it's not
ChaCha20 anymore. Fix it to always use the standard constants.
Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here is the large set of char/misc/whatever driver subsystem updates for
5.12-rc1. Over time it seems like this tree is collecting more and more
tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86
maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only reported
issue being a merge conflict in include/linux/mod_devicetable.h that you
will hit in your tree due to the dfl_device_id addition from the fpga
subsystem in here. The resolution should be simple.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw
tNW6n1JhXLYl9f5JdhvS
=MOHs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
When reseeding the CRNG periodically, arch_get_random_seed_long() is
called to obtain entropy from an architecture specific source if one
is implemented. In most cases, these are special instructions, but in
some cases, such as on ARM, we may want to back this using firmware
calls, which are considerably more expensive.
Another call to arch_get_random_seed_long() exists in the CRNG driver,
in add_interrupt_randomness(), which collects entropy by capturing
inter-interrupt timing and relying on interrupt jitter to provide
random bits. This is done by keeping a per-CPU state, and mixing in
the IRQ number, the cycle counter and the return address every time an
interrupt is taken, and mixing this per-CPU state into the entropy pool
every 64 invocations, or at least once per second. The entropy that is
gathered this way is credited as 1 bit of entropy. Every time this
happens, arch_get_random_seed_long() is invoked, and the result is
mixed in as well, and also credited with 1 bit of entropy.
This means that arch_get_random_seed_long() is called at least once
per second on every CPU, which seems excessive, and doesn't really
scale, especially in a virtualization scenario where CPUs may be
oversubscribed: in cases where arch_get_random_seed_long() is backed
by an instruction that actually goes back to a shared hardware entropy
source (such as RNDRRS on ARM), we will end up hitting it hundreds of
times per second.
So let's drop the call to arch_get_random_seed_long() from
add_interrupt_randomness(), and instead, rely on crng_reseed() to call
the arch hook to get random seed material from the platform.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20201105152944.16953-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Non-cryptographic PRNGs may have great statistical properties, but
are usually trivially predictable to someone who knows the algorithm,
given a small sample of their output. An LFSR like prandom_u32() is
particularly simple, even if the sample is widely scattered bits.
It turns out the network stack uses prandom_u32() for some things like
random port numbers which it would prefer are *not* trivially predictable.
Predictability led to a practical DNS spoofing attack. Oops.
This patch replaces the LFSR with a homebrew cryptographic PRNG based
on the SipHash round function, which is in turn seeded with 128 bits
of strong random key. (The authors of SipHash have *not* been consulted
about this abuse of their algorithm.) Speed is prioritized over security;
attacks are rare, while performance is always wanted.
Replacing all callers of prandom_u32() is the quick fix.
Whether to reinstate a weaker PRNG for uses which can tolerate it
is an open question.
Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") was an earlier attempt at a solution. This patch replaces
it.
Reported-by: Amit Klein <aksecurity@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
[ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions
to prandom.h for later use; merged George's prandom_seed() proposal;
inlined siprand_u32(); replaced the net_rand_state[] array with 4
members to fix a build issue; cosmetic cleanups to make checkpatch
happy; fixed RANDOM32_SELFTEST build ]
Signed-off-by: Willy Tarreau <w@1wt.eu>
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.
Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.
In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state. For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.
Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull sysctl fixes from Al Viro:
"Fixups to regressions in sysctl series"
* 'work.sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
sysctl: reject gigantic reads/write to sysctl files
cdrom: fix an incorrect __user annotation on cdrom_sysctl_info
trace: fix an incorrect __user annotation on stack_trace_sysctl
random: fix an incorrect __user annotation on proc_do_entropy
net/sysctl: remove leftover __user annotations on neigh_proc_dointvec*
net/sysctl: use cpumask_parse in flow_limit_cpu_sysctl
No user pointers for sysctls anymore.
Fixes: 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
Reported-by: build test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1). This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.
Remove this header and fold it into <crypto/sha.h> which already
contains constants and functions for SHA-1 (along with SHA-2).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
