IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
PAT handling is growing in complexity and will continue to do so in
upcoming platforms. Separate it out to a dedicated file to keep things
tidy.
The code is moved as-is here (aside from a few unused #define's that are
just dropped); further changes will come in future patches.
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://lore.kernel.org/r/20230324210415.2434992-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rather waiting for the VM to be destroyed (all refs to VM go to zero),
drop the fault mode counts when the VM is closed in xe_vm_close_and_put.
This avoids a window where user space can create a faulting VM, close
it, and a subsequent creation of a non-faulting VM fails.
v2 (Lucas): Drop VLK reference in commit message
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Suggested-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Intel Vulkan driver needs to know what is the maximum priority to fill
a device info struct for applications.
Right now we getting this information by creating a engine and setting
priorities from min to high to know what is the maximum priority for
running process but this leads to info messages to be printed to
dmesg:
xe 0000:03:00.0: [drm] Ioctl argument check failed at drivers/gpu/drm/xe/xe_engine.c:178: value == DRM_SCHED_PRIORITY_HIGH && !capable(CAP_SYS_NICE)
It does not cause any harm but when executing a test suite like
crucible it causes thousands of those messages to be printed.
So here adding one more property to drm_xe_query_config to fetch the
max engine priority.
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Alderlake S uses TGL HuC.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230323224651.1187366-3-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Follow the new direction of firmware and add macro
support for loading unversioned HuC. Keep HuC
versioned loading support as well for platforms
that fall under force_probe support
Add check to ensure driver does not do any version check
for HuC if going through unversioned load.
v2: unversioned firmware to be the default for platforms
not under force_probe. Maintain versioned firmware macro support
for platforms under force-probe protection.
v3: Minor style and naming adjustments (Lucas)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230323224651.1187366-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Within a class the GuC will hault scheduling if the head of the queue
can't be scheduled the queue will block. This can lead to deadlock if
BCS0-7 all have faults and another engine on BCS0-7 is at head of the
GuC scheduling queue as the migration engine used to fix tthe fault will
be blocked. To work around this set the migration engine to the highest
priority when servicing page faults.
v2 (Maarten): Set priority to kernel once at creation
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rather than using the passed in GT, use the BO's GT determine dma_offset
when programming PTEs as these two GT's could differ (i.e. mapping a BO
from a remote GT). The BO's GT is correct GT to use as this where BO
resides, while the passed in GT is where the mapping is created.
v2:
(Thomas) - Kernel doc, extra new line
(CI) - Rebase to tip
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make sure we pass along the correct errors.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Render / compute engines have additional caches (not just TLBs) that
need to be invalidated each batch, reinstate these invalidations in ring
ops.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_guc_ct_fast_path() is called from an irq context, and cannot lock
the mutex used by xe_device_mem_access_ongoing().
Fortunately it is easy to fix, and the atomic guarantees are good enough
to ensure xe->mem_access.hold_rpm is set before last ref is dropped.
As far as I can tell, the runtime ref in device access should be
killable, but don't dare to do it yet.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Copy this from i915. We need .compatible for vram -> vram transfers, so
they don't just get nooped by ttm, if need to move something from
mappable to non-mappble or vice versa. The .intersects is needed for
eviction, to determine if a victim resource is worth eviction. e.g if we
need mappable space there is no point in evicting a resource that has
zero mappable pages.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Replace the allocation code with the i915 version. This simplifies the
code a little, and importantly we get the accounting at the mgr level,
which is useful for debug (and maybe userspace), plus per resource
tracking so we can easily check if a resource is using one or pages in
the mappable part of vram (useful for eviction), or if the resource is
completely within the mappable portion (useful for checking if the
resource can be safely CPU mapped).
v2: Fix missing PAGE_SHIFT
v3: (Gwan-gyeong Mun)
- Fix incorrect usage of ilog2(mm.chunk_size).
- Fix calculation when checking for impossible allocation sizes, also
check much earlier.
v4: (Gwan-gyeong Mun)
- Fix calculation when extending the [fpfn, lpfn] range due to the
roundup_pow_of_two().
v5: (Gwan-gyeong Mun)
- Move the check for running out of mappable VRAM to before doing any of
the roundup_pow_of_two().
v6: (Jani)
- Stop abusing BUG_ON(). We can easily just use WARN_ON() here and
return a proper error to the caller, which is much nicer if we ever
trigger these.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although xe_migrate_clear() has a value argument, currently the driver
is only passing 0 at all the places this function is invoked with the
exception the kunit tests are using the parameter to validate this
function with different values.
xe_migrate_clear() is failing on platforms with link copy engines
because xe_migrate_clear() via emit_clear() is using the blitter
instruction XY_FAST_COLOR_BLT to clear the memory. But this instruction
is not supported by link copy engine.
So the solution is to use the alternate instruction MEM_SET when
platform contains link copy engine. But MEM_SET instruction accepts only
8-bit value for setting whereas the value agrument of xe_migrate_clear()
is 32-bit.
So instead of spreading this limitation around all invocations of
xe_migrate_clear() and causing more confusion, it was decided to not
accept any value itself as driver does not really need this currently.
All the kunit tests are adapted as per the new function prototype.
This will be followed by a patch to add support for link copy engines.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When the GuC wopcm base and size registers are populated by BIOS/IFWI,
validate the parameters against the maximum allowed wopcm size.
Bpsec: 44982
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Hopefully not needed anymore. We can add a .compatible() hook once we
need to differentiate between mappable and non-mappable vram. If the
allocation is not contiguous then the start value is kind of
meaningless, so rather just mark as invalid.
In upstream, TTM wants to eventually remove the ttm_resource.start
usage.
References: 544432703b2f ("drm/ttm: Add new callbacks to ttm res mgr")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In order to improve readability and make it more future proof,
split the engine type from the graphics/platform checks.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230317223441.3891073-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
First step towards supporting small-bar is to track the io_size for
vram. We can longer assume that the io_size == vram size. This way we
know how much is CPU accessible via the BAR, and how much is not.
Effectively giving us a two tiered vram, where in some later patches we
can support different allocation strategies depending on if the memory
needs to be CPU accessible or not.
Note as this stage we still clamp the vram size to the usable vram size.
Only in the final patch do we turn this on for real, and allow distinct
io_size and vram_size.
v2: (Lucas):
- Improve the commit message, plus improve the kernel-doc for the
io_size to give a better sense of what it actually is.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If all compute engines of a vm in compute mode are idle,
defer a rebind to the next exec to avoid the VM unnecessarily trying
to make memory resident and compete with other VMs for available
memory space.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a test parameter to force GPU page-table updates with the migrate
test and test both CPU- and GPU updates. Also provide some timing
results.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Causes an early 32-bit wrap and may thus help CI catch wrapping errors
that may otherwise not show early enough.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce xe_engine_is_idle, and replace the static function in
xe_migrate.c.
The latter had two flaws. First the seqno == 1 test might return a false
true value each time the seqno counter wrapped, Second, the
cur_seqno == next_seqno test would never return true.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The migrate test currently supports only GPU pagetable updates and
will thus break if we fix the CPU pagetable update selection.
Fix the migrate test first.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Don't wait for GPU to be able to update page-tables using CPU. Putting
ourselves to sleep may be more of a problem than using GPU for
page-table updates. Also allow the vm to be NULL since the migrate
kunit test uses NULL for vm.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Also for HW fences, write the initial seqno - 1 to the HW completed
seqno to initialize.
v2:
- Use __dma_fence_is_later() to compare hw fence seqnos. (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GuC/HuC firmware files used by Xe drivers are the same as
used by i915. Use the already-known location to find those
firmware files, for a couple of reasons:
1. Avoid having the same firmware placed on two different
places on MODULE_FIRMWARE(), if both 915 and xe drivers
are compiled;
2. Having firmware files located on different locations may end
creating bigger initramfs, as the same files will be copied
twice my mkinitrd/dracut/...;
3. this is the place where those firmware files are located at
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
Upstream doesn't expect them to have on other places;
4. When built with display support, DMC firmware will be
loaded from i915/ directory. It is very confusing to have
some firmware files on a different place for the same driver.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas de Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
[ Mostly agree with the direction of "use the firmware blobs from
upstream at their current location for these platforms". Previous
directory was not wrong as the plan was to have it handled in the
upstream firmware repo. For future platforms the location can be
changed if the support is only in xe ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230310081338.3275583-1-mauro.chehab@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It's just a local variable.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All structs and defines had already been renamed to "xe", but some
comments with "i915" were left over. Rename them.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20230313211628.2492587-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize LRC workarounds for graphics version 1200 with i915 up to
commit 7cdae9e9ee5e ("drm/i915: Move DG2 tuning to the right function").
These were probably missed for TGL/RKL before because in i915 it uses a
!IS_DG1() condition. Avoid a similar issue by just checking the
graphics version 1200 since DG1 is 1210.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-14-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the one missing workaround for ADL-P when comparing to i915 up to
commit 7cdae9e9ee5e ("drm/i915: Move DG2 tuning to the right function").
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-13-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 lrc workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
A few simplifications were done when the WA should be applied to some
steps of a subplatform and all the steppings of the other subplatforms.
In this case, it was simply applied to all the steppings, which only
means applying it to a few more A* steppings.
The implementation of the workaround 16011186671 triggers a bug in the
RTP infra: it's not possible to set the flag the usual way when having
multiple actions in the entry. This may be fixed later, but for now it's
sufficient to just set the flag directly without the helper macro.
v2: Fix 14014947963 to use FIELD_SET (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-12-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 tunings as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
Contrary to the tuning "gang timer" for TGL, there is no quick
justification for why the read back is disabled in i915. Keep it
with that flag for now. That can be tentatively removed later when the
read values are checked.
v2: Use XEHP_FF_MODE2 instead of GEN12_FF_MODE2 (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-11-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 gt workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
A few simplifications were done when the WA should be applied to
some steps of a subplatform and all the steppings of the other
subplatforms. This happened with Wa_1509727124, Wa_22012856258 and a few
others. In figure the pre-production steppings will be removed, so this
can be already simplified a little bit.
v2:
- Make 1308578152 conditional on first gslice fused off
- Add the missing Wa_1608949956/Wa_14010198302 (Matt Roper)
v3:
- Do not duplicate the implementation of 18019627453 since it's
already covered by other WA numbers in graphics versions 1200 and
1210
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-10-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 gt workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-9-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sync PVC engine workarounds with i915.
v2: Remove 16016694945. It was added by mistake. It's a GT workaround,
already present in the GT table (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-8-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the PVC gt workarounds as of committ
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w
access order").
v2: Add masked flag to XEHPC_LNCFMISCCFGREG0 (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-7-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that number of platforms is growing, it's getting hard to know the
workarounds for each platform. Split the entries inside the same table
so the workarounds checking IP version are listed first, followed by
each platform. Next step when it grows too much is to split in smaller
tables.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-6-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add debugfs entry to dump the final tables with register save-restore
information.
For the workarounds, this has a format a little bit different than when the
values are applied because we don't want to read the values from the HW
when dumping via debugfs. For whitelist it just re-uses the print
function added for when the whitelist is being built.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-5-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Besides printing the various register save-restore, it's also useful to
know the register being allowed/denied access from unprivileged batch
buffers. Print them during device probe.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-4-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add match helper to detect when the first gslice is fused off, as needed
by future workarounds.
v2:
- Add warning if called on a platform without geometry pipeline
(Matt Roper)
- Hardcode 4 as the number of gslices, which matches all the currently
supported platforms. PVC doesn't have geometry pipeline and
shouldn't use this function (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_ttm_stolen_cpu_inaccessible() was originally meant to just cover the
case where stolen is not directly CPU accessible on some older
integrated platforms, and as such a GGTT mapping was also required for
CPU access (as per the check in xe_bo_create_pin_map_at()).
However with small-bar systems on dgfx we have one more case where
stolen is also inaccessible, however here we don't have any fallback
GGTT mode for CPU access. Fix the check in xe_bo_create_pin_map_at() to
make this distinction clear. In such a case the later vmap() will fail
anyway.
v2: fix kernel-doc warning
v3: Simplify further and remove cpu_inaccessible()
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks to have been introduced in some very recent changes, in-between
merging the driver wide s/lmem/vram/.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Be careful about having const in the compound literal initialization to
keep the initializers in rodata. Here, the impact is 1.8k of mutable
data moved to rodata.
add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-1804 (-1804)
Data old new delta
__compound_literal 1804 - -1804
Total: Before=42425, After=40621, chg -4.25%
add/remove: 0/0 grow/shrink: 1/0 up/down: 1804/0 (1804)
RO Data old new delta
__compound_literal 7696 9500 +1804
Total: Before=138535, After=140339, chg +1.30%
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230309121746.479146-1-jani.nikula@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The PVC pre-production A* steppings are not going to be supported in xe
driver - the steppings are important for the WAs and since we are not
adding the pre-productions ones, there is no need to add the stepping.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This makes it easier when printing the register-save-restore values
to know what is the engine.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The dump function was originally added with the idea that it could be
re-used both for printing the reg-sr data and saving it to pass to GuC
via ADS. This was not used by the GuC integration, so remove it now to
give place to a new debug.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This allows to create WA/tuning rules that match the first engine that
is either of compute or render class. This matters for platforms that
don't have a render engine and that may have arbitrary compute engines
fused off: some register programming need to be added to one of those
engines.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Match functions are generally useful for other parts of the code (e.g.
xe_tuning.c). Move and rename the single one available to create a place
where similar match functions can be added.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
