IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add support for mr76006 pre-scaler which provides divide-by-2 scaling of
the input voltage, so that it can be presented to the VM for measurement
within its range (the VM input range is limited to -0.1V to 1V).
The new "moortec,vm-pre-scaler-x2" property lists the channels that use
the mr76006 pre-scaler.
The driver will use this list to multiply the voltage result by 2, to
present to the user with the actual voltage input source.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-14-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add active channel support per voltage monitor.
The number of active channels is read from the device-tree.
When absent in device-tree, all channels are assumed to be used.
This shall be useful to expose sysfs only for inputs that are connected
to a voltage source.
Setting number of active channels to 0, means that entire VM sensor is
not used.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-13-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add optional "moortec,vm-active-channels" property to define the number
of active channels per VM.
This shall be useful to avoid exposing sysfs for reading inputs that are
not connected to any voltage source.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-12-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Static analyzers report:
drivers/hwmon/emc2305.c:194 emc2305_set_cur_state()
warn: impossible condition '(val > 255) => (0-255 > 255)'
'val' is u8 and thus can never be larger than 255. In theory
the operation calculating 'val' could result in a value larger
than 255, but this won't happen because its parameter has already
been range checked and it is guaranteed that the result never exceeds
255. Remove the unnecessary value check.
Cc: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Don't fail the probe function and don't deassert the reset controller if
a "reset" property doesn't exist in the device tree.
Change is done for SOCs that don't support a reset controller.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-10-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Change "resets" property to be optional instead of required, for SOCs
that don't support a reset controller.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-9-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This changes adds a detailed description for the mr75203 controller and
for some of the analog IPs controlled by it.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-8-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extend aquacomputer_d5next driver to expose various hardware
sensors of the Aquacomputer High Flow Next flow sensor, which
communicates through a proprietary USB HID protocol.
The High Flow Next exposes +5V voltages, water quality, conductivity
and flow readings. A temperature sensor can be connected to it, in
which case it provides its reading and an estimation of the
dissipated/absorbed power in the liquid cooling loop.
Additionally, serial number and firmware version are exposed through
debugfs.
Registry offsets were discovered and tested by users on Github [1] [2].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/8
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/34
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220907100739.806571-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On systems with more than one tps23861, creating the debugfs directory
for additional devices fails with
debugfs: Directory 'tps23861' with parent '/' already present!
To resolve this, include the hwmon device name in the directory name.
Since the name is unique, this guarantees that the debugfs directory
is unique.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220907015405.16547-2-mr.nuke.me@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When reading the 'port_status' debugfs entry, some I2C registers were
read more than once. This looks inefficient in an I2C trace.
To reduce I2C traffic, update tps23861_port_status_show() to only read
each register once. Indexing the port number from 0 instead of 1 also
allows simplifying things a bit.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://lore.kernel.org/r/20220907015405.16547-1-mr.nuke.me@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add driver for Microchip EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.
Modify Makefile and Kconfig to support Microchip EMC2305 RPM-based
PWM Fan Speed Controller.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220810171552.56417-3-michaelsh@nvidia.com
[groeck: Drop unnecessary () around DIV_ROUND_CLOSEST()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Introduce platform data structure for EM2305 driver to allow configuration
device PWMs and thermal zones by passing required platform data
to the driver. If no platform data is provided, the driver is supposed
to work with default settings.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220810171552.56417-2-michaelsh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MAX31790 has a tach input enable bit in each fan's configuration
register. This is only enabled by the driver if RPM mode is selected,
but the driver doesn't provide a way to independently enable tachometer
input regardless of the regulator mode.
By adding the fanN_enable sysfs files, we can decouple the tach input
from the regulator mode. Also update the documentation.
Signed-off-by: Justin Ledford <justinledford@google.com>
Link: https://lore.kernel.org/r/20220829195930.2521755-1-justinledford@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There are no users outside of PWM core of the of_pwm_get().
Make it static.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The devm_of_pwm_get() has recently lost its single user, drop
the dead API as well.
Note, the new code should use either plain pwm_get() or managed
devm_pwm_get() or devm_fwnode_pwm_get() APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There is no need to call OF specific devm_of_pwm_get() since
the device node parameter duplicates in the device parameter.
Hence we may safely replace it by plain devm_pwm_get() call.
This allows to drop devm_of_pwm_get() as no more users will be.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code, the error handling paths and avoid the need of
a dedicated function used with devm_add_action_or_reset().
Based on my test with allyesconfig, this reduces the .o size from:
text data bss dec hex filename
2419 1472 0 3891 f33 drivers/hwmon/sparx5-temp.o
down to:
2155 1472 0 3627 e2b drivers/hwmon/sparx5-temp.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/cfe4c965074b5ecbe03830b05e038b4594c7b970.1661336689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When dell-smm-hwmon is loaded on a machine with a buggy BIOS
with the option "force" being enabled, it wrongly prints
that the buggy features where disabled. This may cause
users to wrongly assume that the driver still protects them
from these BIOS bugs even with "force" being enabled.
Replace the messages with two messages each which are depending
on the value of the "force" parameter. The messages which are
being printed when "force" is not set use dev_notice() instead
of dev_warn() since they only serve as a notice.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220822174053.8750-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220826173700.17395-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add reporting if the PSU is running in single or multi rail mode via
ocpmode debugfs entry. Also update the documentation and driver comments
accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/YvS9PZKr0xqFqJny@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for reading virtual temperature sensors for the D5 Next, Octo,
Quadro and Farbwerk 360.
Virtual temperature sensors are written to the device by the user, pulling
from an arbitrary value source. Writing to them is not yet reverse
engineered, so the only way to set them for now is to use the official
software.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220817121441.112198-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver utilises a WMI interface found in AMD 500 series ASUS boards,
to read EC registers. But it turned out that ASUS abandoned the
interface, as it disappeared from Intel 600 series boards. Additionally,
the WMI interface was incredibly slow. Therefore this driver was deprecated
in favor of the asus_ec_sensors driver, which supports more boards, more
sensors, and is faster.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220720072016.102086-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In gsc_hwmon_get_devtree_pdata(), we should call of_node_get() before
the of_find_compatible_node() which will automatically call
of_node_put() for the 'from' argument.
Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Liang He <windhl@126.com>
Co-developed-by: Mengda Chen <chenmengda2009@163.com>
Signed-off-by: Mengda Chen <chenmengda2009@163.com>
Link: https://lore.kernel.org/r/20220916154708.3084515-1-chenmengda2009@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The offsets for setting speeds of fans connected to Quadro are off by one.
Set them to their correct values.
The offsets as shown point to registers for setting the fan control mode,
which will be explored in future patches, but slipped in here. When
setting fan speeds, the resulting values were overlapping, which made the
fans still run in my initial testing.
Fixes: cdbe34da01e3 ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220914114327.6941-1-savicaleksa83@gmail.com
Cc: stable@vger.kenrel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Remove unused scripts/gcc-ld script
- Add zstd support to scripts/extract-ikconfig
- Check 'make headers' for UML
- Fix scripts/mksysmap to ignore local symbols
-----BEGIN PGP SIGNATURE-----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=FJba
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove unused scripts/gcc-ld script
- Add zstd support to scripts/extract-ikconfig
- Check 'make headers' for UML
- Fix scripts/mksysmap to ignore local symbols
* tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
mksysmap: Fix the mismatch of 'L0' symbols in System.map
kbuild: disable header exports for UML in a straightforward way
scripts/extract-ikconfig: add zstd compression support
scripts: remove obsolete gcc-ld script
- Disable in-kernel BTI when compiling with GCC, as it makes invalid
assumptions about the distance between functions which has led to
crashes when calling modules on a CPU with BTI support.
- Remove bogus TIF_SME flag management if memory allocation fails in the
ptrace code.
- Fix the resume path when configured for 52-bit virtual addressing.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmMcmCUQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNJEPB/9hhMNrX0yAc64otI99DRBuuZjlGWm5tLVj
A5dByt0bvca6XIE/5nZpduYcSGBORL4Ss29mbYteWlaU89TlLEHaedOpDTX0xj5g
61H8UiK0YDX9w/7hbPZw7Uxdvw30LJSxszWZ4Ucst9CYTq+mMbbhgf8h7/BDmBD+
OBpkOlouW4fSw15/UlbgBu6UTAVkbWNcWxzwzOVAdqFYzQ75eMnmOEkEZ8b/YBAA
wZ+0kFmpjGkWymZKlgTxLfQ3eVdKwlrFzBliDtbFoFNuWyyDQ2e1qDQKFZvST4ul
NMVlF19K9NKGVlxl2++rafbg5BQ+Y+0RJ2Hujf72W6sPaThJUDM2
=7sa1
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three small arm64 fixes, all related to optional architecture
extensions: BTI, SME and 52-bit virtual addressing:
- Disable in-kernel BTI when compiling with GCC, as it makes invalid
assumptions about the distance between functions which has led to
crashes when calling modules on a CPU with BTI support
- Remove bogus TIF_SME flag management if memory allocation fails in
the ptrace code
- Fix the resume path when configured for 52-bit virtual addressing"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: fix resume for 52-bit enabled builds
arm64/ptrace: Don't clear calling process' TIF_SME on OOM
arm64/bti: Disable in kernel BTI when cross section thunks are broken
Including:
- Intel VT-d fixes from Lu Baolu
- Boot kdump kernels with VT-d scalable mode on
- Calculate the right page table levels
- Fix two recursive locking issues
- Fix a lockdep splat issue
- AMD IOMMU fixes:
- Fix for completion-wait command to use full 64 bits of data
- Fix PASID related issue where GPU sound devices failed to
initialize
- Fix for Virtio-IOMMU to report correct caching behavior, needed for
use with VFIO
-----BEGIN PGP SIGNATURE-----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=+h6p
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes from Lu Baolu:
- Boot kdump kernels with VT-d scalable mode on
- Calculate the right page table levels
- Fix two recursive locking issues
- Fix a lockdep splat issue
- AMD IOMMU fixes:
- Fix for completion-wait command to use full 64 bits of data
- Fix PASID related issue where GPU sound devices failed to
initialize
- Fix for Virtio-IOMMU to report correct caching behavior, needed for
use with VFIO
* tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix false ownership failure on AMD systems with PASID activated
iommu/vt-d: Fix possible recursive locking in intel_iommu_init()
iommu/virtio: Fix interaction with VFIO
iommu/vt-d: Fix lockdep splat due to klist iteration in atomic context
iommu/vt-d: Fix recursive lock issue in iommu_flush_dev_iotlb()
iommu/vt-d: Correctly calculate sagaw value of IOMMU
iommu/vt-d: Fix kdump kernels boot failure with scalable mode
iommu/amd: use full 64-bit value in build_completion_wait()
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
-----BEGIN PGP SIGNATURE-----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=djqb
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for loongson32 starup hang
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
* tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Select SPARSEMEM_EXTREME
MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
MIPS: octeon: Get rid of preprocessor directives around RESERVE32
MIPS: loongson32: ls1c: Fix hang during startup
The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's
translation being set to IDENTITY. Further it requires changing the RID's
page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a
different v2 layout.
It does this by creating a new iommu_domain, configuring that domain for
v2 identity operation and then attaching it to the group, from within the
driver. This logic assumes the group is already set to the IDENTITY domain
and is being used by the DMA API.
However, since the ownership logic is based on the group's domain pointer
equaling the default domain to detect DMA API ownership, this causes it to
look like the group is not attached to the DMA API any more. This blocks
attaching drivers to any other devices in the group.
In a real system this manifests itself as the HD-audio devices on some AMD
platforms losing their device drivers.
Work around this unique behavior of the AMD driver by checking for
equality of IDENTITY domains based on their type, not their pointer
value. This allows the AMD driver to have two IDENTITY domains for
internal purposes without breaking the check.
Have the AMD driver properly declare that the special domain it created is
actually an IDENTITY domain.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: 512881eacfa7 ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management")
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-ea566e16b06b+811-amd_owner_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac932
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
The dmar_global_lock used in the intel_iommu_init() might cause recursive
locking issue, for example, intel_iommu_get_resv_regions() is taking the
dmar_global_lock from within a section where intel_iommu_init() already
holds it via probe_acpi_namespace_devices().
Using dmar_global_lock in intel_iommu_init() could be relaxed since it is
unlikely that any IO board must be hot added before the IOMMU subsystem is
initialized. This eliminates the possible recursive locking issue by moving
down DMAR hotplug support after the IOMMU is initialized and removing the
uses of dmar_global_lock in intel_iommu_init().
Fixes: d5692d4af08cd ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com
Link: https://lore.kernel.org/r/20220718235325.3952426-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Fix absolute zero lowcore corruption on kdump when CPU0 is offline.
- Fix lowcore protection setup for offline CPU restart.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmMca+IACgkQjYWKoQLX
FBjE4Af+N/s30gWrJT1qY5ACxNyVH+UUbND+J/1Avg/PHMS1fLY/YN48clsPDimD
WqnmYWqMCSxRIg29qY6Inj+7ZMI8lrRwVO46JU+4a9kujKzppjsWxVrotaIYS+5n
EdBHPqdchxAhymAD9BkbffeuelFe/LKRY6R/JywbXMPbzNtx/KTO6wHNmPj3ekqK
04jPtgcVl0bziwvAVGhCxPqrHPUKxkW0EliyDWPvSYdTuroR6m8qKzKzaG2EpXwk
7eOJqIoZ88UVZYHPux+JSlaFMQzZS4a3kMHXzpc0X5DnHmyfYx0why2LFQKWX4fG
mZ59CIaZOV084t8zm98TiPs78sdHsg==
=JuWY
-----END PGP SIGNATURE-----
Merge tag 's390-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix absolute zero lowcore corruption on kdump when CPU0 is offline
- Fix lowcore protection setup for offline CPU restart
* tag 's390-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/smp: enforce lowcore protection on CPU restart
s390/boot: fix absolute zero lowcore corruption on boot
- Fix severe regression in asus-ec-sensors driver which resulted
in EC driver failures.
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
-----BEGIN PGP SIGNATURE-----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=4wSZ
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix severe regression in asus-ec-sensors driver
which resulted in EC driver failures
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
* tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) autoload module via DMI data
hwmon: (mr75203) enable polling for all VM channels
hwmon: (mr75203) fix multi-channel voltage reading
hwmon: (mr75203) fix voltage equation for negative source input
hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined
dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional
hwmon: (tps23861) fix byte order in resistance register
- revert a panic on swiotlb initialization failure (Yu Zhao)
- fix the lookup for partial syncs in dma-debug (Robin Murphy)
- fix a shift overflow in swiotlb (Chao Gao)
- fix a comment typo in swiotlb (Chao Gao)
- mark a function static now that all abusers are gone
(Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=n7sX
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- revert a panic on swiotlb initialization failure (Yu Zhao)
- fix the lookup for partial syncs in dma-debug (Robin Murphy)
- fix a shift overflow in swiotlb (Chao Gao)
- fix a comment typo in swiotlb (Chao Gao)
- mark a function static now that all abusers are gone (Christoph
Hellwig)
* tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: mark dma_supported static
swiotlb: fix a typo
swiotlb: avoid potential left shift overflow
dma-debug: improve search for partial syncs
Revert "swiotlb: panic if nslabs is too small"
__cpu_setup() was changed to take the actual number of VA bits in x0,
however the resume path was not updated at the same time.
Load `vabits_actual` in the resume path, to ensure that the correct
number of VA bits is used.
This fixes booting v6.0-rc kernels on my Juno.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Fixes: 0aaa68532e9d ("arm64: mm: fix booting with 52-bit address space")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220909124311.38489-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Eight patches which looks like quite a large core change, but most of
the diffstat is reverting the attempt to rejig reference counting
introduced in the last merge window which caused issues with device
and module removal. Of the remaining four patches, only the fix
use-after-free is substantial.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYxt9aSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXVqAQCh9Tne
QHW5206CIOTIkNKJKNNKItLo26YaAEV3utb3xwEAzdDWsf1hA6GeppAhB7REIWh/
86uJqOBsGB6h3kMrgnk=
=yDR4
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight patches which looks like quite a large core change, but most of
the diffstat is reverting the attempt to rejig reference counting
introduced in the last merge window which caused issues with device
and module removal.
Of the remaining four patches, only the fix use-after-free is
substantial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix use-after-free warning
scsi: core: Fix a use-after-free
scsi: core: Revert "Make sure that targets outlive devices"
scsi: core: Revert "Make sure that hosts outlive targets"
scsi: core: Revert "Simplify LLD module reference counting"
scsi: core: Revert "Call blk_mq_free_tag_set() earlier"
scsi: lpfc: Add missing destroy_workqueue() in error path
scsi: lpfc: Return DID_TRANSPORT_DISRUPTED instead of DID_REQUEUE
When System.map was generated, the kernel used mksysmap to filter the
kernel symbols, we need to filter "L0" symbols in LoongArch architecture.
$ cat System.map | grep L0
9000000000221540 t L0
The L0 symbol exists in System.map, but not in .tmp_System.map. When
"cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms
data" error message in link-vmlinux.sh script.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYxuERw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylPqwCgjU6xlN2y/80HH+66k+yyzlxocE8AoLPgnGrA
dJZIGWFXExzO26tvMT52
=zGHA
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems"
* tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
arch_topology: Make cluster topology span at least SMT CPUs
sched/debug: fix dentry leak in update_sched_domain_debugfs
debugfs: add debugfs_lookup_and_remove()
driver core: fix driver_set_override() issue with empty strings
Revert "arch_topology: Make cluster topology span at least SMT CPUs"
arch_topology: Make cluster topology span at least SMT CPUs
-----BEGIN PGP SIGNATURE-----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=3RZd
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull via Christoph:
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors
(Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)
- Fix missing request flags in debugfs code (me)
- Partition scan fix (Ming)
* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
block: add missing request flags to debugfs code
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
-----BEGIN PGP SIGNATURE-----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=8R3K
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Removed function that became unused after last week's merge (Jiapeng)
- Two small fixes for kbuf recycling (Pavel)
- Include address copy for zc send for POLLFIRST (Pavel)
- Fix for short IO handling in the normal read/write path (Pavel)
* tag 'io_uring-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
io_uring/rw: fix short rw error handling
io_uring/net: copy addr for zc on POLL_FIRST
io_uring: recycle kbuf recycle on tw requeue
io_uring/kbuf: fix not advancing READV kbuf ring
io_uring/notif: Remove the unused function io_notif_complete()
Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect capability
reporting to userspace, improper error handling for MW corners, touching
an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed
a timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type in
siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a crash on
error unwind.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYxtj4QAKCRCFwuHvBreF
YQNdAQDOAoXv3PCZikmyu4zmjzVdeUUXEig5RU3MgFdCimo99gEA8t+2/pHmnSTB
vn7cxuKMpJydAmLVFJPZxaOEuaBdegQ=
=/eYF
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect
capability reporting to userspace, improper error handling for MW
corners, touching an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed a
timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type
in siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a
crash on error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report RNR NAK generation in device caps
RDMA/irdma: Use s/g array in post send only when its valid
RDMA/irdma: Return correct WC error for bind operation failure
RDMA/irdma: Return error on MR deregister CQP failure
RDMA/irdma: Report the correct max cqes from query device
MAINTAINERS: Update maintainers of HiSilicon RoCE
RDMA/mlx5: Fix UMR cleanup on error flow of driver init
RDMA/mlx5: Set local port to one when accessing counters
RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile
IB/core: Fix a nested dead lock as part of ODP flow
RDMA/siw: Pass a pointer to virt_to_page()
RDMA/srp: Set scmnd->result only when scmnd is not NULL
RDMA/hns: Remove the num_qpc_timer variable
RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift
RDMA/hns: Fix supported page size
RDMA/cma: Fix arguments order in net device validation
RDMA/irdma: Fix drain SQ hang with no completion
RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL
RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
edid:
- Fix EDID 1.4 range-descriptor parsing
ttm:
- Fix ghost-object bulk moves
i915:
- Fix MIPI sequence block copy from BIOS' table
- Fix PCODE min freq setup when GuC's SLPC is in use
- Implement Workaround for eDP
- Fix has_flat_ccs selection for DG1
amdgpu:
- Firmware header fix
- SMU 13.x fix
- Debugfs memory leak fix
- NBIO 7.7 fix
- Firmware memory leak fix
amdkfd:
- Debug output fix
panfrost:
- Fix devfreq OPP
-----BEGIN PGP SIGNATURE-----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=Sypj
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"From a train in the Irish countryside, regular drm fixes for 6.0-rc5.
This is mostly amdgpu/amdkfd and i915 fixes, then one panfrost, one
ttm and one edid fix. Nothing too major going on. Hopefully a quiet
week next week for LPC.
edid:
- Fix EDID 1.4 range-descriptor parsing
ttm:
- Fix ghost-object bulk moves
i915:
- Fix MIPI sequence block copy from BIOS' table
- Fix PCODE min freq setup when GuC's SLPC is in use
- Implement Workaround for eDP
- Fix has_flat_ccs selection for DG1
amdgpu:
- Firmware header fix
- SMU 13.x fix
- Debugfs memory leak fix
- NBIO 7.7 fix
- Firmware memory leak fix
amdkfd:
- Debug output fix
panfrost:
- Fix devfreq OPP"
* tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm:
drm/panfrost: devfreq: set opp to the recommended one to configure regulator
drm/ttm: cleanup the resource of ghost objects after locking them
drm/amdgpu: prevent toc firmware memory leak
drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGE
drm/amdkfd: print address in hex format rather than decimal
drm/amd/display: fix memory leak when using debugfs_lookup()
drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7
drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_header
drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pages
drm/i915: Implement WaEdpLinkRateDataReload
drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPC
drm/i915/bios: Copy the whole MIPI sequence block
drm/ttm: update bulk move object of ghost BO
drm/edid: Handle EDID 1.4 range descriptor h/vfreq offsets
