IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Aloka originally suggested that puncturing should be part of
the chandef, so that it's treated correctly. At the time, I
disagreed and it ended up not part of the chandef, but I've
now realized that this was wrong. Even for clients, the RX,
and perhaps more importantly, CCA configuration needs to take
puncturing into account.
Move puncturing into the chandef, and adjust all the code
accordingly. Also add a few tests for puncturing in chandef
compatibility checking.
Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/
Suggested-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Simplify cfg80211_chandef_compatible() a bit by switching
c1 and c2 around so that c1 is always the narrower one
(once they're not identical or narrow/S1G). Then we can
just check the various primary channels and exit with the
wider one (c2), or NULL.
Also refactor the primary 40/80/160 function to not have
all the calculations hard-coded, and use a wrapper around
it to check primary 40/80/160 compatibility.
While at it, add some kunit tests for this functionality.
Also expose the new cfg80211_chandef_primary_freq() to
drivers, mac80211 will use it.
Link: https://msgid.link/20240129194108.be3e6eccaba3.I8399c2ff1435d7378e5837794cb5aa6dd2ee1416@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to the earlier restructuring we now mostly ignore
the channel configuration in the association response,
apart from the HT/VHT checks we had.
Don't do that, but parse it and update, also dropping the
association if the AP changed its mode in the response.
Link: https://msgid.link/20240129194108.b3efa5eae60c.I1b70c9fd56781b22cdfdca55d34d69f7d0733e31@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EHT requires that stations are able to participate in
wider bandwidth OFDMA, i.e. parse downlink OFDMA and
uplink OFDMA triggers when they're not capable of (or
not connected at) the (wider) bandwidth that the AP
is using. This requires hardware configuration, since
the entity responsible for parsing (possibly hardware)
needs to know the AP bandwidth.
To support this, change the channel request to have
the AP's bandwidth for clients, and track that in the
channel context in mac80211. This means that the same
chandef might need to be split up into two different
contexts, if the APs are different. Interfaces other
than client are not participating in OFDMA the same
way, so they don't request any AP setting.
Note that this doesn't introduce any API to split a
channel context, so that there are cases where this
might lead to a disconnect, e.g. if there are two
client interfaces using the same channel context, e.g.
both 160 MHz connected to different 320 MHz APs, and
one of the APs switches to 160 MHz.
Note also there are possible cases where this can be
optimised, e.g. when using the upper or lower 160 Mhz,
but I haven't been able to really fully understand the
spec and/or hardware limitations.
If, for some reason, there are no hardware limits on
this because the OFDMA (downlink/trigger) parsing is
done in firmware and can take the transmitter into
account, then drivers can set the new flag
IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW on interfaces to
not have them request any AP bandwidth in the channel
context and ignore this issue entirely. The bss_conf
still contains the AP configuration (if any, i.e. EHT)
in the chanreq.
Link: https://msgid.link/20240129194108.d3d5b35dd783.I939d04674f4ff06f39934b1591c8d36a30ce74c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the channel context code we have quite a few instances
of nested loops iterating the interfaces and then links.
Add a new for_each_sdata_link() macro and use it. Also,
since it's easier, convert all the loops and a few other
places away from RCU as we now hold the wiphy mutex
everywhere anyway.
This does cause a little bit more work (such as checking
interface types for each link of an interface rather than
not iterating links in some cases), but that's not a huge
issue and seems like an acceptable trade-off, readability
is important too.
Link: https://msgid.link/20240129194108.7240829bd96d.I5ccbb8dd019cbcb5326c85d76121359225d6541a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.
Unfortunately, with EHT this is longer be sufficient, at
least not for all hardware. EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA that specify the position
and bandwidth for the non-AP STA relative to the channel
the AP is using. Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over two channel contexts where they
differ by the AP being used.
As a first step, introduce a concept of a channel request
('chanreq') for each interface, to control the context it
requests. This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.
Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are still surprisingly many non-chanctx drivers, but in
mac80211 that code is a bit awkward. Simplify this by having
those drivers assign 'emulated' ops, so that the mac80211 code
can be more unified between non-chanctx/chanctx drivers. This
cuts the number of places caring about it by about 15, which
are scattered across - now they're fewer and no longer in the
channel context handling.
Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the code we currently check for support 80+80, 160
and 320 channel widths, but really the way this should
be (and is otherwise) handled is that we compute the
highest channel bandwidth given there, and then cut it
down to what we support. This is also needed for wider
bandwidth OFDMA support.
Change the code to remove this limitation and always
parse the highest possible channel width.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129194108.d06f85082e29.I47e68ed3d97b0a2f4ee61e5d8abfcefc8a5b9c08@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rewrite the station-side connection handling. The connection
flags (IEEE80211_DISABLE_*) are rather confusing, and they're
not always maintained well. Additionally, for wider-bandwidth
OFDMA support we need to know the precise bandwidth of the AP,
which is currently somewhat difficult.
Rewrite this to have a 'mode' (S1G/legacy/HT/...) and a limit
on the bandwidth. This is not entirely clean because some of
those modes aren't completely sequenced (as this assumes in
some places), e.g. VHT doesn't exist on 2.4 GHz, but HE does.
However, it still simplifies things and gives us a good idea
what we're operating as, so we can parse elements accordingly
etc.
This leaves a FIXME for puncturing, this is addressed in a
later patch.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129194108.9451722c0110.I3e61f4cfe9da89008e1854160093c76a1e69dc2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Most devices now do duration calculations, so we don't hit
this code at all any more. Clearly the approach of warning
at compile time here when new bands are added didn't work,
the new bands were just added with "TODO". Clean it up, it
won't matter for new bands since they'll just not have any
need to calculate durations in software.
While at it, also clean up and unify the code a bit.
Link: https://msgid.link/20240129194108.70a97bd69265.Icdd8b0ac60a382244466510090eb0f5868151f39@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Not sure how this happened or how nothing complained, but
this variable already exists in the outer function scope
with the same value (and the SKB isn't changed either.)
Remove the extra one.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This got unused when the tracing was converted to dynamic
strings, so the define can be removed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some changes coming to wireless-next that will
otherwise cause conflicts, pull wireless in first to be
able to resolve that when applying the individual changes
rather than having to do merge resolution later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Until now, rtl8xxxu_watchdog_callback() only fetches RSSI and updates
the rate mask in station mode. This means, in AP mode only the default
rate mask is used.
In order to have the rate mask reflect the actual connection quality,
extend rtl8xxxu_watchdog_callback() to iterate over every sta. Like in
the rtw88 driver, add a function to collect all currently present stas
and then iterate over a list of copies to ensure no RCU lock problems
for register access via USB. Remove the existing RCU lock in
rtl8xxxu_refresh_rate_mask().
Since the currently used ieee80211_ave_rssi() is only for 'vif', add
driver-level tracking of RSSI per sta.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240205093040.1941140-1-martin.kaistra@linutronix.de
Now that the driver core can properly handle constant struct bus_type,
move the bcma_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240204-bus_cleanup-bcma-v1-1-0d881c793190@marliere.net
Now that the driver core can properly handle constant struct bus_type,
move the ssb_bustype variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240204-bus_cleanup-ssb-v1-1-511026cd5f3c@marliere.net
Since firmware header contains multiple secure sections, we need to trim
ignored sections, and then download firmware header with single one secure
section.
For secure boot, when downloading secure section, copy security key data
from MSS poll by key_idx read from efuse. If non-secure boot, no need this
extra copy.
+---------------------------+ -\
| firmware header | |
| | |
| +-----------------------+ | | only preserve single one secure
| | section type/size * N | | | section
| | ... | | |
| +-----------------------+ | |
+---------------------------+ -/
: :
+---------------------------+ -\
| secure section type (ID:9)| |
| | |
+----|-> [ security key data ] | |
| +---------------------------+ -/
| |MSS Pool for above section |
| | [ security key data 0 ] |
+----|- [ security key data 1 ] |
by key_idx | [ security key data 2 ] |
| ... |
+---------------------------+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240204012627.9647-5-pkshih@realtek.com
A firmware file can contains more than one section with secure type, so
use secure information from efuse to choose the one with matched
cryptography method. Then choose key data from MSS poll (multiple security
section pool; see below picture) according to key_index from efuse.
Note that the size of MSS pool isn't included in section size defined
in firmware header, so we also need to parse header of MSS pool to get
its size as shift to parse next section.
If secure boot isn't supported by current hardware, the first secure
section will be adopted, and no need additional process to key data.
+---------------------------+
| firmware header |
| |
| +-----------------------+ |
| | section type/size * N-|-|-------+
| | ... | | |
| +-----------------------+ | |
+---------------------------+ |
: : |
+---------------------------+ -\ |
| secure section type (ID:9)| | |
| | | <--+
| | |
+---------------------------+ -/
|MSS Pool for above section |
| |
| |
+---------------------------+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240204012627.9647-4-pkshih@realtek.com
To support firmware secure boot, read secure information from efuse to
know if current hardware module can support secure boot with certain
cryptography method.
This information should be prepared before downloading firmware, so read
efuse right after power on at probe stage. The secure information includes
secure cryptography method and secure key index that are used to choose
proper key material when downloading firmware.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240204012627.9647-3-pkshih@realtek.com
The newer firmware file provides security data with checksum, so we need to
consider the length. Otherwise it will fail to validate total firmware
length resulting in failed to probe.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240204012627.9647-2-pkshih@realtek.com
Add a chip_ops for WiFi 7 chips to set additional RF configurations
including MLO and PLL settings.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-12-pkshih@realtek.com
The RF calibrations are moved into firmware, so we trigger calibrations by
H2C commands and wait for C2H completion events. However, these events
can be received only after HCI (i.e. PCI for now) starts, so we should
do initial RF calibrations after that.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-11-pkshih@realtek.com
Calling RF calibrations when interface up, connection, switching bands and
going to scan.
For 8922AE, RF calibrations are moved to firmware, so use H2C commands to
trigger RF calibrations and wait for a C2H event to indicate completion.
Then, do next RF calibration.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-10-pkshih@realtek.com
TSSI is short for transmitter signal strength indication, which is a
close-loop hardware circuit to feedback actual transmitting power as a
reference to adjust power for next transmission.
When connecting and switching bands or channels, do TSSI calibration and
reset hardware status to output expected power.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-9-pkshih@realtek.com
TXGAPK stands for TX power gap calibration. Use this calibration to
compensate TX power gap to output expected power.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-8-pkshih@realtek.com
DACK (digital-to-analog converters calibration) is used to calibrate DAC
to output signals with expected quality.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-7-pkshih@realtek.com
DPK is short for digital pre-distortion calibration. It can adjusts digital
waveform according to PA linear characteristics dynamically to enhance
TX EVM.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-6-pkshih@realtek.com
RX DCK is receiver DC calibration. This will calibrate DC offset to
reflect correct received signal strength indicator, so mechanisms like CCA
can have normalized values.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-5-pkshih@realtek.com
IQ signal calibration is a basic and important calibration to yield good RF
performance. Do this calibration on AP channel if we are going to connect.
During scanning phase, it transmits with low data rate, so without IQK
RF performance is still acceptable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-4-pkshih@realtek.com
We are going to do RF calibrations in firmware, so driver needs to provide
channel information for calibrations, which can do the same things as
they did in driver.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-3-pkshih@realtek.com
The RF calibrations should be executed one by one, so add a completion
to ensure one is finish before next. The report from C2H event contains
state and optional version, and we only check the state for now. We also
care about the time a RF calibration takes, so record start time before
asking firmware to do calibration and get the delta time when receiving
report.
Consider SER recovery, we can't receive C2H event, use half of argument
'ms' as fixed delay that is 2 times of measured maximum time of
calibrations.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202030642.108385-2-pkshih@realtek.com
Calling spi_sync() unconditionally sets the spi field of struct
spi_message. Therefore setting msg.spi = spi before calling spi_sync()
has no effect and can be removed.
(spi_message_add_tail() does not access this field.)
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240201201248.2334798-2-dlechner@baylibre.com
The CW1200 uses two GPIOs to control the powerup and reset
pins, get these from GPIO descriptors instead of being passed
as platform data from boardfiles.
The RESET line will need to be marked as active low as we will
let gpiolib handle the polarity inversion.
The SDIO case is a bit special since the "card" need to be
powered up before it gets detected on the SDIO bus and
properly probed. Fix this by using board-specific GPIOs
assigned to device "NULL".
There are currently no in-tree users.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-6-e1c7c5d68746@linaro.org
The mwifiex driver include two legacy GPIO headers but does
not use symbols from any of them.
The driver does contain some "gpio" handling code, but this
is some custom GPIO interface, not the Linux GPIO.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-4-e1c7c5d68746@linaro.org
The driver is using all the modern abstractions to obtain and use
GPIOs and the legacy <linux/gpio.h> header is unused, so drop it.
Fixes: a8e59744e16b ("gpiolib: split linux/gpio/driver.h out of linux/gpio.h")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-3-e1c7c5d68746@linaro.org
Sparse warns:
drivers/net/wireless/st/cw1200/cw1200_spi.c:83:17: got restricted __le16 [usertype]
drivers/net/wireless/st/cw1200/cw1200_spi.c:148:17: warning: incorrect type in assignment (different base types)
drivers/net/wireless/st/cw1200/cw1200_spi.c:148:17: expected unsigned short [addressable] [assigned] [usertype] regaddr
drivers/net/wireless/st/cw1200/cw1200_spi.c:148:17: got restricted __le16 [usertype]
These cpu_to_le16() calls are not really making any sense to me. On a big
endian system we first convert regaddr from big to little using cpu_to_le16()
but immediately after we convert them back to big endian? So just remove them.
Compile tested only.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240130151556.2315951-4-kvalo@kernel.org
drivers/net/wireless/rsi/rsi_91x_usb.c:235:27: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:236:27: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:237:27: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:238:27: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:244:36: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:245:35: warning: restricted __le32 degrades to integer
These cpu_to_le32() are not making sense. With usb_reg_buf we handle the values
byte at a time to make sure usb_reg_buf is in little endian so no need to
convert anything. And usb_control_msg() expects to have the values in native
endian anyway. So just remove these so they are not spamming our logs.
Compile tested only.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240130151556.2315951-3-kvalo@kernel.org
Sparse warns:
drivers/net/wireless/zydas/zd1211rw/zd_usb.c:383:24: warning: implicit cast from nocast type
drivers/net/wireless/zydas/zd1211rw/zd_usb.c:419:24: warning: implicit cast from nocast type
This is an ancient driver which has not have any meaningfuli changes for a long
time and hopefully removed soon. So just remove the __nocast to get rid of the
sparse warnings.
Compile tested only.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240130151556.2315951-2-kvalo@kernel.org
TP-Link TL-WN823N V2 (2357:0135) is based on rtl8192fu and has been
tested to work with the rtl8xxxu driver.
Signed-off-by: Chun Qiu <cqca@cock.lu>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240129053030.16369-1-cqca@cock.lu
In the for statement of lbs_allocate_cmd_buffer(), if the allocation of
cmdarray[i].cmdbuf fails, both cmdarray and cmdarray[i].cmdbuf needs to
be freed. Otherwise, there will be memleaks in lbs_allocate_cmd_buffer().
Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126075336.2825608-1-alexious@zju.edu.cn
