IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The hook only handles cleanup work specific to SNP, e.g. RMP table
entries and flushing caches for encrypted guest memory. When run on a
non-SNP-enabled host (currently only possible using
KVM_X86_SW_PROTECTED_VM, e.g. via KVM selftests), the callback is a noop
and will WARN due to the RMP table not being present. It's actually
expected in this case that the RMP table wouldn't be present and that
the hook should be a noop, so drop the WARN_ONCE().
Reported-by: Sean Christopherson <seanjc@google.com>
Closes: https://lore.kernel.org/kvm/ZkU3_y0UoPk5yAeK@google.com/
Fixes: 8eb01900b018 ("KVM: SEV: Implement gmem hook for invalidating private pages")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently there's a consistent pattern of always calling
host_rmp_make_shared() immediately after snp_page_reclaim(), so go ahead
and handle it automatically as part of snp_page_reclaim(). Also rename
it to kvm_rmp_make_shared() to more easily distinguish it as a
KVM-specific variant of the more generic rmp_make_shared() helper.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a module parameter than can be used to enable or disable the SEV-SNP
feature. Now that KVM contains the support for the SNP set the GHCB
hypervisor feature flag to indicate that SNP is supported.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-18-michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With SNP/guest_memfd, private/encrypted memory should not be mappable,
and MMU notifications for HVA-mapped memory will only be relevant to
unencrypted guest memory. Therefore, the rationale behind issuing a
wbinvd_on_all_cpus() in sev_guest_memory_reclaimed() should not apply
for SNP guests and can be ignored.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[mdr: Add some clarifications in commit]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-17-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the case of SEV-SNP, whether or not a 2MB page can be mapped via a
2MB mapping in the guest's nested page table depends on whether or not
any subpages within the range have already been initialized as private
in the RMP table. The existing mixed-attribute tracking in KVM is
insufficient here, for instance:
- gmem allocates 2MB page
- guest issues PVALIDATE on 2MB page
- guest later converts a subpage to shared
- SNP host code issues PSMASH to split 2MB RMP mapping to 4K
- KVM MMU splits NPT mapping to 4K
- guest later converts that shared page back to private
At this point there are no mixed attributes, and KVM would normally
allow for 2MB NPT mappings again, but this is actually not allowed
because the RMP table mappings are 4K and cannot be promoted on the
hypervisor side, so the NPT mappings must still be limited to 4K to
match this.
Implement a kvm_x86_ops.private_max_mapping_level() hook for SEV that
checks for this condition and adjusts the mapping level accordingly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-16-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement a platform hook to do the work of restoring the direct map
entries of gmem-managed pages and transitioning the corresponding RMP
table entries back to the default shared/hypervisor-owned state.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-15-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will handle the RMP table updates needed to put a page into a
private state before mapping it into an SEV-SNP guest.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-14-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SEV-SNP AP Creation NAE event. This allows SEV-SNP
guests to alter the register state of the APs on their own. This allows
the guest a way of simulating INIT-SIPI.
A new event, KVM_REQ_UPDATE_PROTECTED_GUEST_STATE, is created and used
so as to avoid updating the VMSA pointer while the vCPU is running.
For CREATE
The guest supplies the GPA of the VMSA to be used for the vCPU with
the specified APIC ID. The GPA is saved in the svm struct of the
target vCPU, the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event is added
to the vCPU and then the vCPU is kicked.
For CREATE_ON_INIT:
The guest supplies the GPA of the VMSA to be used for the vCPU with
the specified APIC ID the next time an INIT is performed. The GPA is
saved in the svm struct of the target vCPU.
For DESTROY:
The guest indicates it wishes to stop the vCPU. The GPA is cleared
from the svm struct, the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event is
added to vCPU and then the vCPU is kicked.
The KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event handler will be invoked
as a result of the event or as a result of an INIT. If a new VMSA is to
be installed, the VMSA guest page is set as the VMSA in the vCPU VMCB
and the vCPU state is set to KVM_MP_STATE_RUNNABLE. If a new VMSA is not
to be installed, the VMSA is cleared in the vCPU VMCB and the vCPU state
is set to KVM_MP_STATE_HALTED to prevent it from being run.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-13-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SEV-SNP is enabled in the guest, the hardware places restrictions
on all memory accesses based on the contents of the RMP table. When
hardware encounters RMP check failure caused by the guest memory access
it raises the #NPF. The error code contains additional information on
the access type. See the APM volume 2 for additional information.
When using gmem, RMP faults resulting from mismatches between the state
in the RMP table vs. what the guest expects via its page table result
in KVM_EXIT_MEMORY_FAULTs being forwarded to userspace to handle. This
means the only expected case that needs to be handled in the kernel is
when the page size of the entry in the RMP table is larger than the
mapping in the nested page table, in which case a PSMASH instruction
needs to be issued to split the large RMP entry into individual 4K
entries so that subsequent accesses can succeed.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-12-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP VMs can ask the hypervisor to change the page state in the RMP
table to be private or shared using the Page State Change NAE event
as defined in the GHCB specification version 2.
Forward these requests to userspace as KVM_EXIT_VMGEXITs, similar to how
it is done for requests that don't use a GHCB page.
As with the MSR-based page-state changes, use the existing
KVM_HC_MAP_GPA_RANGE hypercall format to deliver these requests to
userspace via KVM_EXIT_HYPERCALL.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-11-michael.roth@amd.com>
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP VMs can ask the hypervisor to change the page state in the RMP
table to be private or shared using the Page State Change MSR protocol
as defined in the GHCB specification.
When using gmem, private/shared memory is allocated through separate
pools, and KVM relies on userspace issuing a KVM_SET_MEMORY_ATTRIBUTES
KVM ioctl to tell the KVM MMU whether or not a particular GFN should be
backed by private memory or not.
Forward these page state change requests to userspace so that it can
issue the expected KVM ioctls. The KVM MMU will handle updating the RMP
entries when it is ready to map a private page into a guest.
Use the existing KVM_HC_MAP_GPA_RANGE hypercall format to deliver these
requests to userspace via KVM_EXIT_HYPERCALL.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-10-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP guests are required to perform a GHCB GPA registration. Before
using a GHCB GPA for a vCPU the first time, a guest must register the
vCPU GHCB GPA. If hypervisor can work with the guest requested GPA then
it must respond back with the same GPA otherwise return -1.
On VMEXIT, verify that the GHCB GPA matches with the registered value.
If a mismatch is detected, then abort the guest.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-9-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a KVM_SEV_SNP_LAUNCH_FINISH command to finalize the cryptographic
launch digest which stores the measurement of the guest at launch time.
Also extend the existing SNP firmware data structures to support
disabling the use of Versioned Chip Endorsement Keys (VCEK) by guests as
part of this command.
While finalizing the launch flow, the code also issues the LAUNCH_UPDATE
SNP firmware commands to encrypt/measure the initial VMSA pages for each
configured vCPU, which requires setting the RMP entries for those pages
to private, so also add handling to clean up the RMP entries for these
pages whening freeing vCPUs during shutdown.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-8-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A key aspect of a launching an SNP guest is initializing it with a
known/measured payload which is then encrypted into guest memory as
pre-validated private pages and then measured into the cryptographic
launch context created with KVM_SEV_SNP_LAUNCH_START so that the guest
can attest itself after booting.
Since all private pages are provided by guest_memfd, make use of the
kvm_gmem_populate() interface to handle this. The general flow is that
guest_memfd will handle allocating the pages associated with the GPA
ranges being initialized by each particular call of
KVM_SEV_SNP_LAUNCH_UPDATE, copying data from userspace into those pages,
and then the post_populate callback will do the work of setting the
RMP entries for these pages to private and issuing the SNP firmware
calls to encrypt/measure them.
For more information see the SEV-SNP specification.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-7-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_SEV_SNP_LAUNCH_START begins the launch process for an SEV-SNP guest.
The command initializes a cryptographic digest context used to construct
the measurement of the guest. Other commands can then at that point be
used to load/encrypt data into the guest's initial launch image.
For more information see the SEV-SNP specification.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-6-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP builds upon existing SEV and SEV-ES functionality while adding
new hardware-based security protection. SEV-SNP adds strong memory
encryption and integrity protection to help prevent malicious
hypervisor-based attacks such as data replay, memory re-mapping, and
more, to create an isolated execution environment.
Define a new KVM_X86_SNP_VM type which makes use of these capabilities
and extend the KVM_SEV_INIT2 ioctl to support it. Also add a basic
helper to check whether SNP is enabled and set PFERR_PRIVATE_ACCESS for
private #NPFs so they are handled appropriately by KVM MMU.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240501085210.2213060-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP relies on private memory support to run guests, so make sure to
enable that support via the CONFIG_KVM_GENERIC_PRIVATE_MEM config
option.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-4-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For hardware-protected VMs like SEV-SNP guests, certain conditions like
attempting to perform a write to a page which is not in the state that
the guest expects it to be in can result in a nested/extended #PF which
can only be satisfied by the host performing an implicit page state
change to transition the page into the expected shared/private state.
This is generally handled by generating a KVM_EXIT_MEMORY_FAULT event
that gets forwarded to userspace to handle via
KVM_SET_MEMORY_ATTRIBUTES.
However, the fast_page_fault() code might misconstrue this situation as
being the result of a write-protected access, and treat it as a spurious
case when it sees that writes are already allowed for the sPTE. This
results in the KVM MMU trying to resume the guest rather than taking any
action to satisfy the real source of the #PF such as generating a
KVM_EXIT_MEMORY_FAULT, resulting in the guest spinning on nested #PFs.
Check for this condition and bail out of the fast path if it is
detected.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
-----BEGIN PGP SIGNATURE-----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=9RXP
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.10:
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
- Process TDP MMU SPTEs that are are zapped while holding mmu_lock for read
after replacing REMOVED_SPTE with '0' and flushing remote TLBs, which allows
vCPU tasks to repopulate the zapped region while the zapper finishes tearing
down the old, defunct page tables.
- Fix a longstanding, likely benign-in-practice race where KVM could fail to
detect a write from kvm_mmu_track_write() to a shadowed GPTE if the GPTE is
first page table being shadowed.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmY+pUMACgkQOlYIJqCj
N/2U6A//T3twYSURCUhM/3QYHDoH2RSldxQFs9i4+wJvXdvu4/VK08q1jPltTifm
6QoloLzJq34rSPPsYAvKSicfhC9Trxz+Cks6oe2wJrDvNNzco+mksC0owj2FsdeO
8pLh2VGqdmRU64afpnjTRneONJCsxTxHsoVdVEDSMhWiiFX9jj74QS2AbMB/XIli
rFHK70kpEBTHGzg9E84xcjZb5DBB9+8jIGryWMtXfTAWHC0IO9gSAybLEoVAHZFL
lUUGpeAs4P97mX28fQFqMm3ZffKE3hfHRfjEoW5BefnZeXYaABwF586I/w7QTjQI
yHLgvh10a0a0X1hcCsDQFgy81uOLkbVDPUcBOTTY59DXT7Zp2il5bwcMvNBfaaUZ
olR0auaeOxjPz4/WXd9JOZLaNJYCZqhEQnbEnt0RYcJ4MDULOocbD+D//+3yWPNp
Dd6t8x73qXqa6GbtwOYWkMENwiDObTZaYBxTUhTd1z6gWpIeXx2fK8RRZ7/+/psF
Pf/dzSvwOrXUpISQEVn6Q5sRlBS5nzd1vIWRoVe+pze2WYM3SX9E/3SksMCm+TRz
Is8e+05HvjiaMpZeEjRjbUbBgpQakZYJ1TEwGbC6GLP/PUkssUluiDaQDxCwLPoQ
bDb/I4NxDUbr0TaEvPszJuA1we8jGpQceq6wUo7n/mX2jC78Syo=
=Izml
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.10:
- Process TDP MMU SPTEs that are are zapped while holding mmu_lock for read
after replacing REMOVED_SPTE with '0' and flushing remote TLBs, which allows
vCPU tasks to repopulate the zapped region while the zapper finishes tearing
down the old, defunct page tables.
- Fix a longstanding, likely benign-in-practice race where KVM could fail to
detect a write from kvm_mmu_track_write() to a shadowed GPTE if the GPTE is
first page table being shadowed.
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
-----BEGIN PGP SIGNATURE-----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=vsRz
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM selftests treewide updates for 6.10:
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig VM-Exit to
L1, as per the SDM.
- Move kvm_vcpu_arch's exit_qualification into x86_exception, as the field is
used only when synthesizing nested EPT violation, i.e. it's not the vCPU's
"real" exit_qualification, which is tracked elsewhere.
- Add a sanity check to assert that EPT Violations are the only sources of
nested PML Full VM-Exits.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmY+qzEACgkQOlYIJqCj
N/3O0Q/9HZruiL9vzMrLBKgFgWCxQHO2fy+EixuwzVBHunQGOsVnDCO2p+PWnF0p
kuW/MEZhZfLYnXoDi5/AP12G9qtDhlSNnfSl2gn+BMXqyGSYpcoXuM/zTjM24wLd
PXKkPirYMpVR2+lHsD7l8YK2I+qc7UfbRkCyJegBgGwUBs13/TBD6Rum3Aa9Q+dX
IcwjomH+MdHDFPnpfHjksA+G79Ckkqmu/DbOAlCqw1dUSC8oyV9tE/EKStSBzjZ+
OGMSm7Kl0T+km1JyH60H1ivbUbT3gJxpezoYL9EbO25VPrdldKP+ohqbtew/8ttk
UP/oW3mL79I7L06ZqqxZKDDj4JGvz53UhhAylZcBPw0P3v9TQF3wm59K4eM9btNt
eyIaT0SAbcigHAniM+3FPkq443hRxDvLNF5E66Ez03HhhkEz3ZsyNH1oPnQK0Crq
N1e+NGuKsTAPBzc3sSSrxOHnCajTUQ9WYjOpfdSgWsL6TQOmXIvHl0tE2ILrvDc/
f+VG62veqa9CCmX5B2lUT0yX9nXvyXKwVpJY9RSQIhB46sA8zjSZsZRCQFkDI5Gx
pzjxjcXtydAMWpn5qUvpD0B6agMlP6WUJHlu+ezmBQuSUHr+2PHY5dEj9442SusF
98VGJy8APxDhidK5TaJJXWmDfKNhEaWboMcTnWM1TwY/qLfDsVU=
=0ncM
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-vmx-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM VMX changes for 6.10:
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig VM-Exit to
L1, as per the SDM.
- Move kvm_vcpu_arch's exit_qualification into x86_exception, as the field is
used only when synthesizing nested EPT violation, i.e. it's not the vCPU's
"real" exit_qualification, which is tracked elsewhere.
- Add a sanity check to assert that EPT Violations are the only sources of
nested PML Full VM-Exits.
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
-----BEGIN PGP SIGNATURE-----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=wAt8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM selftests cleanups and fixes for 6.10:
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
- Misc cleanups extracted from the "exit on missing userspace mapping" series,
which has been put on hold in anticipation of a "KVM Userfault" approach,
which should provide a superset of functionality.
- Remove kvm_make_all_cpus_request_except(), which got added to hack around an
AVIC bug, and then became dead code when a more robust fix came along.
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
-----BEGIN PGP SIGNATURE-----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=dgM4
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM cleanups for 6.10:
- Misc cleanups extracted from the "exit on missing userspace mapping" series,
which has been put on hold in anticipation of a "KVM Userfault" approach,
which should provide a superset of functionality.
- Remove kvm_make_all_cpus_request_except(), which got added to hack around an
AVIC bug, and then became dead code when a more robust fix came along.
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=CEfD
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.10
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
While the main additions from GHCB protocol version 1 to version 2
revolve mostly around SEV-SNP support, there are a number of changes
applicable to SEV-ES guests as well. Pluck a handful patches from the
SNP hypervisor patchset for GHCB-related changes that are also applicable
to SEV-ES. A KVM_SEV_INIT2 field lets userspace can control the maximum
GHCB protocol version advertised to guests and manage compatibility
across kernels/versions.
A combination of prep work for TDX and SNP, and a clean up of the
page fault path to (hopefully) make it easier to follow the rules for
private memory, noslot faults, writes to read-only slots, etc.
In the case of SEV-SNP, whether or not a 2MB page can be mapped via a
2MB mapping in the guest's nested page table depends on whether or not
any subpages within the range have already been initialized as private
in the RMP table. The existing mixed-attribute tracking in KVM is
insufficient here, for instance:
- gmem allocates 2MB page
- guest issues PVALIDATE on 2MB page
- guest later converts a subpage to shared
- SNP host code issues PSMASH to split 2MB RMP mapping to 4K
- KVM MMU splits NPT mapping to 4K
- guest later converts that shared page back to private
At this point there are no mixed attributes, and KVM would normally
allow for 2MB NPT mappings again, but this is actually not allowed
because the RMP table mappings are 4K and cannot be promoted on the
hypervisor side, so the NPT mappings must still be limited to 4K to
match this.
Add a hook to determine the max NPT mapping size in situations like
this.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <20240501085210.2213060-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, like with SEV-SNP, guest memory needs to be updated in a
platform-specific manner before it can be safely freed back to the host.
Wire up arch-defined hooks to the .free_folio kvm_gmem_aops callback to
allow for special handling of this sort when freeing memory in response
to FALLOC_FL_PUNCH_HOLE operations and when releasing the inode, and go
ahead and define an arch-specific hook for x86 since it will be needed
for handling memory used for SEV-SNP guests.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-6-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During guest run-time, kvm_arch_gmem_prepare() is issued as needed to
prepare newly-allocated gmem pages prior to mapping them into the guest.
In the case of SEV-SNP, this mainly involves setting the pages to
private in the RMP table.
However, for the GPA ranges comprising the initial guest payload, which
are encrypted/measured prior to starting the guest, the gmem pages need
to be accessed prior to setting them to private in the RMP table so they
can be initialized with the userspace-provided data. Additionally, an
SNP firmware call is needed afterward to encrypt them in-place and
measure the contents into the guest's launch digest.
While it is possible to bypass the kvm_arch_gmem_prepare() hooks so that
this handling can be done in an open-coded/vendor-specific manner, this
may expose more gmem-internal state/dependencies to external callers
than necessary. Try to avoid this by implementing an interface that
tries to handle as much of the common functionality inside gmem as
possible, while also making it generic enough to potentially be
usable/extensible for TDX as well.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for adding a function that walks a set of pages
provided by userspace and populates them in a guest_memfd,
add a version of kvm_gmem_get_pfn() that has a "bool prepare"
argument and passes it down to kvm_gmem_get_folio().
Populating guest memory has to call repeatedly __kvm_gmem_get_pfn()
on the same file, so make the new function take struct file*.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
guest_memfd pages are generally expected to be in some arch-defined
initial state prior to using them for guest memory. For SEV-SNP this
initial state is 'private', or 'guest-owned', and requires additional
operations to move these pages into a 'private' state by updating the
corresponding entries the RMP table.
Allow for an arch-defined hook to handle updates of this sort, and go
ahead and implement one for x86 so KVM implementations like AMD SVM can
register a kvm_x86_ops callback to handle these updates for SEV-SNP
guests.
The preparation callback is always called when allocating/grabbing
folios via gmem, and it is up to the architecture to keep track of
whether or not the pages are already in the expected state (e.g. the RMP
table in the case of SEV-SNP).
In some cases, it is necessary to defer the preparation of the pages to
handle things like in-place encryption of initial guest memory payloads
before marking these pages as 'private'/'guest-owned'. Add an argument
(always true for now) to kvm_gmem_get_folio() that allows for the
preparation callback to be bypassed. To detect possible issues in
the way userspace initializes memory, it is only possible to add an
unprepared page if it is not already included in the filemap.
Link: https://lore.kernel.org/lkml/ZLqVdvsF11Ddo7Dq@google.com/
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because kvm_gmem_get_pfn() is called from the page fault path without
any of the slots_lock, filemap lock or mmu_lock taken, it is
possible for it to race with kvm_gmem_unbind(). This is not a
problem, as any PTE that is installed temporarily will be zapped
before the guest has the occasion to run.
However, it is not possible to have a complete unbind+bind
racing with the page fault, because deleting the memslot
will call synchronize_srcu_expedited() and wait for the
page fault to be resolved. Thus, we can still warn if
the file is there and is not the one we expect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some SNP ioctls will require the page not to be in the pagecache, and as such they
will want to return EEXIST to userspace. Start by passing the error up from
filemap_grab_folio.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
truncate_inode_pages_range() may attempt to zero pages before truncating
them, and this will occur before arch-specific invalidations can be
triggered via .invalidate_folio/.free_folio hooks via kvm_gmem_aops. For
AMD SEV-SNP this would result in an RMP #PF being generated by the
hardware, which is currently treated as fatal (and even if specifically
allowed for, would not result in anything other than garbage being
written to guest pages due to encryption). On Intel TDX this would also
result in undesirable behavior.
Set the AS_INACCESSIBLE flag to prevent the MM from attempting
unexpected accesses of this sort during operations like truncation.
This may also in some cases yield a decent performance improvement for
guest_memfd userspace implementations that hole-punch ranges immediately
after private->shared conversions via KVM_SET_MEMORY_ATTRIBUTES, since
the current implementation of truncate_inode_pages_range() always ends
up zero'ing an entire 4K range if it is backing by a 2M folio.
Link: https://lore.kernel.org/lkml/ZR9LYhpxTaTk6PJX@google.com/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240329212444.395559-6-michael.roth@amd.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
filemap users like guest_memfd may use page cache pages to
allocate/manage memory that is only intended to be accessed by guests
via hardware protections like encryption. Writes to memory of this sort
in common paths like truncation may cause unexpected behavior such as
writing garbage instead of zeros when attempting to zero pages, or
worse, triggering hardware protections that are considered fatal as far
as the kernel is concerned.
Introduce a new address_space flag, AS_INACCESSIBLE, and use this
initially to prevent zero'ing of pages during truncation, with the
understanding that it is up to the owner of the mapping to handle this
specially if needed.
This is admittedly a rather blunt solution, but it seems like
there are no other places that should take into account the
flag to keep its promise.
Link: https://lore.kernel.org/lkml/ZR9LYhpxTaTk6PJX@google.com/
Cc: Matthew Wilcox <willy@infradead.org>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240329212444.395559-5-michael.roth@amd.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kvm-arm64/mpidr-reset:
: .
: Fixes for CLIDR_EL1 and MPIDR_EL1 being accidentally mutable across
: a vcpu reset, courtesy of Oliver. From the cover letter:
:
: "For VM-wide feature ID registers we ensure they get initialized once for
: the lifetime of a VM. On the other hand, vCPU-local feature ID registers
: get re-initialized on every vCPU reset, potentially clobbering the
: values userspace set up.
:
: MPIDR_EL1 and CLIDR_EL1 are the only registers in this space that we
: allow userspace to modify for now. Clobbering the value of MPIDR_EL1 has
: some disastrous side effects as the compressed index used by the
: MPIDR-to-vCPU lookup table assumes MPIDR_EL1 is immutable after KVM_RUN.
:
: Series + reproducer test case to address the problem of KVM wiping out
: userspace changes to these registers. Note that there are still some
: differences between VM and vCPU scoped feature ID registers from the
: perspective of userspace. We do not allow the value of VM-scope
: registers to change after KVM_RUN, but vCPU registers remain mutable."
: .
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
Signed-off-by: Marc Zyngier <maz@kernel.org>
Test that CLIDR_EL1 and MPIDR_EL1 are modifiable from userspace and that
the values are preserved across a vCPU reset like the other feature ID
registers.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502233529.1958459-8-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Rather than comparing against what is returned by the ioctl, store
expected values for the feature ID registers in a table and compare with
that instead.
This will prove useful for subsequent tests involving vCPU reset.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502233529.1958459-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The general expecation with feature ID registers is that they're 'reset'
exactly once by KVM for the lifetime of a vCPU/VM, such that any
userspace changes to the CPU features / identity are honored after a
vCPU gets reset (e.g. PSCI_ON).
KVM handles what it calls VM-scoped feature ID registers correctly, but
feature ID registers local to a vCPU (CLIDR_EL1, MPIDR_EL1) get wiped
after every reset. What's especially concerning is that a
potentially-changing MPIDR_EL1 breaks MPIDR compression for indexing
mpidr_data, as the mask of useful bits to build the index could change.
This is absolutely no good. Avoid resetting vCPU feature ID registers
more than once.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502233529.1958459-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
A subsequent change to KVM will expand the range of feature ID registers
that get special treatment at reset. Fold the existing ones back in to
kvm_reset_sys_regs() to avoid the need for an additional table walk.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502233529.1958459-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The naming of some of the feature ID checks is ambiguous. Rephrase the
is_id_reg() helper to make its purpose slightly clearer.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502233529.1958459-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/misc-6.10:
: .
: Misc fixes and updates targeting 6.10
:
: - Improve boot-time diagnostics when the sysreg tables
: are not correctly sorted
:
: - Allow FFA_MSG_SEND_DIRECT_REQ in the FFA proxy
:
: - Fix duplicate XNX field in the ID_AA64MMFR1_EL1
: writeable mask
:
: - Allocate PPIs and SGIs outside of the vcpu structure, allowing
: for smaller EL2 mapping and some flexibility in implementing
: more or less than 32 private IRQs.
:
: - Use bitmap_gather() instead of its open-coded equivalent
:
: - Make protected mode use hVHE if available
:
: - Purge stale mpidr_data if a vcpu is created after the MPIDR
: map has been created
: .
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: arm64: Convert kvm_mpidr_index() to bitmap_gather()
KVM: arm64: vgic: Allocate private interrupts on demand
KVM: arm64: Remove duplicated AA64MMFR1_EL1 XNX
KVM: arm64: Remove FFA_MSG_SEND_DIRECT_REQ from the denylist
KVM: arm64: Improve out-of-order sysreg table diagnostics
Signed-off-by: Marc Zyngier <maz@kernel.org>
A particularly annoying userspace could create a vCPU after KVM has
computed mpidr_data for the VM, either by racing against VGIC
initialization or having a userspace irqchip.
In any case, this means mpidr_data no longer fully describes the VM, and
attempts to find the new vCPU with kvm_mpidr_to_vcpu() will fail. The
fix is to discard mpidr_data altogether, as it is only a performance
optimization and not required for correctness. In all likelihood KVM
will recompute the mappings when KVM_RUN is called on the new vCPU.
Note that reads of mpidr_data are not guarded by a lock; promote to RCU
to cope with the possibility of mpidr_data being invalidated at runtime.
Fixes: 54a8006d0b49 ("KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is available")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240508071952.2035422-1-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The early command line parsing treats "kvm-arm.mode=protected" as an
alias for "id_aa64mmfr1.vh=0", forcing the use of nVHE so that the host
kernel runs at EL1 with the pKVM hypervisor at EL2.
With the introduction of hVHE support in ad744e8cb346 ("arm64: Allow
arm64_sw.hvhe on command line"), the hypervisor can run using the EL2+0
translation regime. This is interesting for unusual CPUs that have VH
stuck to 1, but also because it opens the possibility of a hypervisor
"userspace" in the distant future which could be used to isolate vCPU
contexts in the hypervisor (see Marc's talk from KVM Forum 2022 [1]).
Repaint the "kvm-arm.mode=protected" alias to map to "arm64_sw.hvhe=1",
which will use hVHE on CPUs that support it and remain with nVHE
otherwise.
[1] https://www.youtube.com/watch?v=1F_Mf2j9eIo
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240501163400.15838-3-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
