IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The latest Xilinx design tools called ISE and EDK has been released in
October 2013. New tool doesn't support any PPC405/PPC440 new designs.
These platforms are no longer supported and tested.
PowerPC 405/440 port is orphan from 2013 by
commit cdeb89943b ("MAINTAINERS: Fix incorrect status tag") and
commit 19624236cc ("MAINTAINERS: Update Grant's email address and maintainership")
that's why it is time to remove the support fot these platforms.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu
The same complicated sequence for juggling EE, RI, soft mask, and
irq tracing is repeated 3 times, tidy these up into one function.
This differs qiute a bit between sub architectures, so this makes
the ppc32 port cleaner as well.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429062421.1675400-1-npiggin@gmail.com
The idea behind this prefetch was to kick off a page table walk before
returning from the fault, getting some pipelining advantage.
But this never showed up any noticable performance advantage, and in
fact with KUAP the prefetches are actually blocked and cause some
kind of micro-architectural fault. Removing this improves page fault
microbenchmark performance by about 9%.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Keep the early return in update_mmu_cache()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200504122907.49304-1-npiggin@gmail.com
This causes a build error with CONFIG_WALNUT because kb_cs and kb_data
were removed in commit 917f0af9e5 ("powerpc: Remove arch/ppc and
include/asm-ppc").
ld.lld: error: undefined symbol: kb_cs
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
ld.lld: error: undefined symbol: kb_data
> referenced by i8042.c:309 (drivers/input/serio/i8042.c:309)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042.c:319 (drivers/input/serio/i8042.c:319)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced 15 more times
Presumably since nobody has noticed this for the last 12 years, there is
not anyone actually trying to use this driver so we can just remove this
special walnut code and use the generic header so it builds for all
configurations.
Fixes: 917f0af9e5 ("powerpc: Remove arch/ppc and include/asm-ppc")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20200518181043.3363953-1-natechancellor@gmail.com
Now that instances of input_dev support polling mode natively,
we no longer need to create input_polled_dev instance.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191002214854.GA114387@dtor-ws
The XIVE interrupt mode can be disabled with the "xive=off" kernel
parameter, in which case there is nothing to present to the user in the
associated /sys/kernel/debug/powerpc/xive file.
Fixes: 930914b7d5 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429075122.1216388-4-clg@kaod.org
Commit 1ca3dec2b2 ("powerpc/xive: Prevent page fault issues in the
machine crash handler") fixed an issue in the FW assisted dump of
machines using hash MMU and the XIVE interrupt mode under the POWER
hypervisor. It forced the mapping of the ESB page of interrupts being
mapped in the Linux IRQ number space to make sure the 'crash kexec'
sequence worked during such an event. But it didn't handle the
un-mapping.
This mapping is now blocking the removal of a passthrough IO adapter
under the POWER hypervisor because it expects the guest OS to have
cleared all page table entries related to the adapter. If some are
still present, the RTAS call which isolates the PCI slot returns error
9001 "valid outstanding translations".
Remove these mapping in the IRQ data cleanup routine.
Under KVM, this cleanup is not required because the ESB pages for the
adapter interrupts are un-mapped from the guest by the hypervisor in
the KVM XIVE native device. This is now redundant but it's harmless.
Fixes: 1ca3dec2b2 ("powerpc/xive: Prevent page fault issues in the machine crash handler")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429075122.1216388-2-clg@kaod.org
The code patching code wants to get the value of a struct ppc_inst as
a u64 when the instruction is prefixed, so we can pass the u64 down to
__put_user_asm() and write it with a single store.
The optprobes code wants to load a struct ppc_inst as an immediate
into a register so it is useful to have it as a u64 to use the
existing helper function.
Currently this is a bit awkward because the value differs based on the
CPU endianness, so add a helper to do the conversion.
This fixes the usage in arch_prepare_optimized_kprobe() which was
previously incorrect on big endian.
Fixes: 650b55b707 ("powerpc: Add prefixed instructions to instruction data type")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20200526072630.2487363-1-mpe@ellerman.id.au
In a few places we want to calculate the address of the next
instruction. Previously that was simple, we just added 4 bytes, or if
using a u32 * we incremented that pointer by 1.
But prefixed instructions make it more complicated, we need to advance
by either 4 or 8 bytes depending on the actual instruction. We also
can't do pointer arithmetic using struct ppc_inst, because it is
always 8 bytes in size on 64-bit, even though we might only need to
advance by 4 bytes.
So add a ppc_inst_next() helper which calculates the location of the
next instruction, if the given instruction was located at the given
address. Note the instruction doesn't need to actually be at the
address in memory.
Although it would seem natural for the value to be passed by value,
that makes it too easy to write a loop that will read off the end of a
page, eg:
for (; src < end; src = ppc_inst_next(src, *src),
dest = ppc_inst_next(dest, *dest))
As noticed by Christophe and Jordan, if end is the exact end of a
page, and the next page is not mapped, this will fault, because *dest
will read 8 bytes, 4 bytes into the next page.
So value is passed by reference, so the helper can be careful to use
ppc_inst_read() on it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20200522133318.1681406-1-mpe@ellerman.id.au
Merge our fixes branch from this cycle. It contains several important
fixes we need in next for testing purposes, and also some that will
conflict with upcoming changes.
Merge Christophe's large series to use huge pages for the linear
mapping on 8xx.
From his cover letter:
The main purpose of this big series is to:
- reorganise huge page handling to avoid using mm_slices.
- use huge pages to map kernel memory on the 8xx.
The 8xx supports 4 page sizes: 4k, 16k, 512k and 8M.
It uses 2 Level page tables, PGD having 1024 entries, each entry
covering 4M address space. Then each page table has 1024 entries.
At the time being, page sizes are managed in PGD entries, implying
the use of mm_slices as it can't mix several pages of the same size
in one page table.
The first purpose of this series is to reorganise things so that
standard page tables can also handle 512k pages. This is done by
adding a new _PAGE_HUGE flag which will be copied into the Level 1
entry in the TLB miss handler. That done, we have 2 types of pages:
- PGD entries to regular page tables handling 4k/16k and 512k pages
- PGD entries to hugepd tables handling 8M pages.
There is no need to mix 8M pages with other sizes, because a 8M page
will use more than what a single PGD covers.
Then comes the second purpose of this series. At the time being, the
8xx has implemented special handling in the TLB miss handlers in order
to transparently map kernel linear address space and the IMMR using
huge pages by building the TLB entries in assembly at the time of the
exception.
As mm_slices is only for user space pages, and also because it would
anyway not be convenient to slice kernel address space, it was not
possible to use huge pages for kernel address space. But after step
one of the series, it is now more flexible to use huge pages.
This series drop all assembly 'just in time' handling of huge pages
and use huge pages in page tables instead.
Once the above is done, then comes icing on the cake:
- Use huge pages for KASAN shadow mapping
- Allow pinned TLBs with strict kernel rwx
- Allow pinned TLBs with debug pagealloc
Then, last but not least, those modifications for the 8xx allows the
following improvement on book3s/32:
- Mapping KASAN shadow with BATs
- Allowing BATs with debug pagealloc
All this allows to considerably simplify TLB miss handlers and associated
initialisation. The overhead of reading page tables is negligible
compared to the reduction of the miss handlers.
While we were at touching pte_update(), some cleanup was done
there too.
Tested widely on 8xx and 832x. Boot tested on QEMU MAC99.
DEBUG_PAGEALLOC only manages RW data.
Text and RO data can still be mapped with BATs.
In order to map with BATs, also enforce data alignment. Set
by default to 256M which is a good compromise for keeping
enough BATs for also KASAN and IMMR.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fd29c1718ee44d82115d0e835ced808eb4ccbf51.1589866984.git.christophe.leroy@csgroup.eu
DEBUG_PAGEALLOC only manages RW data.
Text and RO data can still be mapped with hugepages and pinned TLB.
In order to map with hugepages, also enforce a 512kB data alignment
minimum. That's a trade-off between size of speed, taking into
account that DEBUG_PAGEALLOC is a debug option. Anyway the alignment
is still tunable.
We also allow tuning of alignment for book3s to limit the complexity
of the test in Kconfig that will anyway disappear in the following
patches once DEBUG_PAGEALLOC is handled together with BATs.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c13256f2d356a316715da61fe089b3623ef217a5.1589866984.git.christophe.leroy@csgroup.eu
Pinned TLB are 8M. Now that there is no strict boundary anymore
between text and RO data, it is possible to use 8M pinned executable
TLB that covers both text and RO data.
When PIN_TLB_DATA or PIN_TLB_TEXT is selected, enforce 8M RW data
alignment and allow STRICT_KERNEL_RWX.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c535fc97bf0dd8693192e25feeed8088701e00c6.1589866984.git.christophe.leroy@csgroup.eu
Map linear memory space with 512k and 8M pages whenever
possible.
Three mappings are performed:
- One for kernel text
- One for RO data
- One for the rest
Separating the mappings is done to be able to update the
protection later when using STRICT_KERNEL_RWX.
The ITLB miss handler now need to also handle huge TLBs
unless kernel text in pinned.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c44f0ab5510474f25123d904cd1f4e5c6aa3c1ac.1589866984.git.christophe.leroy@csgroup.eu
Add a function to early map kernel memory using huge pages.
For 512k pages, just use standard page table and map in using 512k
pages.
For 8M pages, create a hugepd table and populate the two PGD
entries with it.
This function can only be used to create page tables at startup. Once
the regular SLAB allocation functions replace memblock functions,
this function cannot allocate new pages anymore. However it can still
update existing mappings with new protections.
hugepd_none() macro is moved into asm/hugetlb.h to be usable outside
of mm/hugetlbpage.c
early_pte_alloc_kernel() is made visible.
_PAGE_HUGE flag is now displayed by ptdump.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Change ptdump display to use "huge"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/68325bcd3b6f93127f7810418a2352c3519066d6.1589866984.git.christophe.leroy@csgroup.eu
Now that linear and IMMR dedicated TLB handling is gone, kernel
boundary address comparison is similar in ITLB miss handler and
in DTLB miss handler.
Create a macro named compare_to_kernel_boundary.
When TASK_SIZE is strictly below 0x80000000 and PAGE_OFFSET is
above 0x80000000, it is enough to compare to 0x8000000, and this
can be done with a single instruction.
Using not. instruction, we get to use 'blt' conditional branch as
when doing a regular comparison:
0x00000000 <= addr <= 0x7fffffff ==>
0xffffffff >= NOT(addr) >= 0x80000000
The above test corresponds to a 'blt'
Otherwise, do a regular comparison using two instructions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6312575d06a8813105e6564a3b12e1d373aa1b2f.1589866984.git.christophe.leroy@csgroup.eu
Up to now, linear and IMMR mappings are managed via huge TLB entries
through specific code directly in TLB miss handlers. This implies
some patching of the TLB miss handlers at startup, and a lot of
dedicated code.
Remove all this specific dedicated code.
For now we are back to normal handling via standard 4k pages. In the
next patches, linear memory mapping and IMMR mapping will be managed
through huge pages.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/221b7e3ead80a5969629938c023f8cfe45fdd2fb.1589866984.git.christophe.leroy@csgroup.eu
At startup, map 32 Mbytes of memory through 4 pages of 8M,
and PIN them inconditionnaly. They need to be pinned because
KASAN is using page tables early and the TLBs might be
dynamically replaced otherwise.
Remove RSV4I flag after installing mappings unless
CONFIG_PIN_TLB_XXXX is selected.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b27c5767d18053b59f7eefddc189fcc3acf7b9c2.1589866984.git.christophe.leroy@csgroup.eu
Only early debug requires IMMR to be mapped early.
No need to set it up and pin it in assembly. Map it
through page tables at udbg init when necessary.
If CONFIG_PIN_TLB_IMMR is selected, pin it once we
don't need the 32 Mb pinned RAM anymore.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/13c1e8539fdf363d3146f4884e5c3c76c6c308b5.1589866984.git.christophe.leroy@csgroup.eu
Pinned TLBs cannot be modified when the MMU is enabled.
Create a function to rewrite the pinned TLB entries with MMU off.
To set pinned TLB, we have to turn off MMU, disable pinning,
do a TLB flush (Either with tlbie and tlbia) then reprogam
the TLB entries, enable pinning and turn on MMU.
If using tlbie, it cleared entries in both instruction and data
TLB regardless whether pinning is disabled or not.
If using tlbia, it clears all entries of the TLB which has
disabled pinning.
To make it easy, just clear all entries in both TLBs, and
reprogram them.
The function takes two arguments, the top of the memory to
consider and whether data is RO under _sinittext.
When DEBUG_PAGEALLOC is set, the top is the end of kernel rodata.
Otherwise, that's the top of physical RAM.
Everything below _sinittext is set RX, over _sinittext that's RW.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c17806014bb1c06513ad1e1d510faea31984b177.1589866984.git.christophe.leroy@csgroup.eu
At the time being, 512k huge pages are handled through hugepd page
tables. The PMD entry is flagged as a hugepd pointer and it
means that only 512k hugepages can be managed in that 4M block.
However, the hugepd table has the same size as a normal page
table, and 512k entries can therefore be nested with normal pages.
On the 8xx, TLB loading is performed by software and allthough the
page tables are organised to match the L1 and L2 level defined by
the HW, all TLB entries have both L1 and L2 independent entries.
It means that even if two TLB entries are associated with the same
PMD entry, they can be loaded with different values in L1 part.
The L1 entry contains the page size (PS field):
- 00 for 4k and 16 pages
- 01 for 512k pages
- 11 for 8M pages
By adding a flag for hugepages in the PTE (_PAGE_HUGE) and copying it
into the lower bit of PS, we can then manage 512k pages with normal
page tables:
- PMD entry has PS=11 for 8M pages
- PMD entry has PS=00 for other pages.
As a PMD entry covers 4M areas, a PMD will either point to a hugepd
table having a single entry to an 8M page, or the PMD will point to
a standard page table which will have either entries to 4k or 16k or
512k pages. For 512k pages, as the L1 entry will not know it is a
512k page before the PTE is read, there will be 128 entries in the
PTE as if it was 4k pages. But when loading the TLB, it will be
flagged as a 512k page.
Note that we can't use pmd_ptr() in asm/nohash/32/pgtable.h because
it is not defined yet.
In ITLB miss, we keep the possibility to opt it out as when kernel
text is pinned and no user hugepages are used, we can save several
instruction by not using r11.
In DTLB miss, that's just one instruction so it's not worth bothering
with it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/002819e8e166bf81d24b24782d98de7c40905d8f.1589866984.git.christophe.leroy@csgroup.eu
Prepare ITLB handler to handle _PAGE_HUGE when CONFIG_HUGETLBFS
is enabled. This means that the L1 entry has to be kept in r11
until L2 entry is read, in order to insert _PAGE_HUGE into it.
Also move pgd_offset helpers before pte_update() as they
will be needed there in next patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/21fd1de8fba781bededa9474a5a9374aefb1f849.1589866984.git.christophe.leroy@csgroup.eu
CONFIG_8xx_COPYBACK was there to help disabling copyback cache mode
for debuging hardware. But nobody will design new boards with 8xx now.
All 8xx platforms select it, so make it the default and remove
the option.
Also remove the Mx_RESETVAL values which are pretty useless and hide
the real value while reading code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bcc968cda075516eb76e2f25e09821f582c566b4.1589866984.git.christophe.leroy@csgroup.eu
Commit 55c8fc3f49 ("powerpc/8xx: reintroduce 16K pages with HW
assistance") redefined pte_t as a struct of 4 pte_basic_t, because
in 16K pages mode there are four identical entries in the page table.
But hugepd entries for 8M pages require only one entry of size
pte_basic_t. So there is no point in creating a cache for 4 entries
page tables.
Calculate PTE_T_ORDER using the size of pte_basic_t instead of pte_t.
Define specific huge_pte helpers (set_huge_pte_at(), huge_pte_clear(),
huge_ptep_set_wrprotect()) to write the pte in a single entry instead
of using set_pte_at() which writes 4 identical entries in 16k pages
mode. Also make sure that __ptep_set_access_flags() properly handle
the huge_pte case.
Define set_pte_filter() inline otherwise GCC doesn't inline it anymore
because it is now used twice, and that gives a pretty suboptimal code
because of pte_t being a struct of 4 entries.
Those functions are also used for 512k pages which only require one
entry as well allthough replicating it four times was harmless as 512k
pages entries are spread every 128 bytes in the table.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/43050d1a0c2d6e1541cab9c1126fc80bc7015ebd.1589866984.git.christophe.leroy@csgroup.eu
pte_update() is a bit special for the 8xx. At the time
being, that's an #ifdef inside the nohash/32 pte_update().
As we are going to make it even more special in the coming
patches, create a dedicated version for pte_update() for 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a103be0099ac2360f8c44f4a1a63cc03713a1360.1589866984.git.christophe.leroy@csgroup.eu
PPC64 takes 3 additional parameters compared to PPC32:
- mm
- address
- huge
These 3 parameters will be needed in order to perform different
action depending on the page size on the 8xx.
Make pte_update() prototype identical for PPC32 and PPC64.
This allows dropping an #ifdef in huge_ptep_get_and_clear().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/38111acf6841047a8addde37c63e92d611ee38c2.1589866984.git.christophe.leroy@csgroup.eu
On PPC32, __ptep_test_and_clear_young() takes the mm->context.id
In preparation of standardising pte_update() params between PPC32 and
PPC64, __ptep_test_and_clear_young() need mm instead of mm->context.id
Replace context param by mm.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0a65470e50a14373b7c2291184514aa982462255.1589866984.git.christophe.leroy@csgroup.eu
When CONFIG_PTE_64BIT is set, pte_update() operates on
'unsigned long long'
When CONFIG_PTE_64BIT is not set, pte_update() operates on
'unsigned long'
In asm/page.h, we have pte_basic_t which is 'unsigned long long'
when CONFIG_PTE_64BIT is set and 'unsigned long' otherwise.
Refactor pte_update() using pte_basic_t.
While we are at it, drop the comment on 44x which is not applicable
to book3s version of pte_update().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c78912bc8613fb249c3d80aeb1062796b5c49400.1589866984.git.christophe.leroy@csgroup.eu
When CONFIG_PTE_64BIT is set, pte_update() operates on
'unsigned long long'
When CONFIG_PTE_64BIT is not set, pte_update() operates on
'unsigned long'
In asm/page.h, we have pte_basic_t which is 'unsigned long long'
when CONFIG_PTE_64BIT is set and 'unsigned long' otherwise.
Refactor pte_update() using pte_basic_t.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/590d67994a2847cd9fe088f7d974499e3a18b6ac.1589866984.git.christophe.leroy@csgroup.eu
Only 40x still uses PTE_ATOMIC_UPDATES.
40x cannot not select CONFIG_PTE64_BIT.
Drop handling of PTE_ATOMIC_UPDATES:
- In nohash/64
- In nohash/32 for CONFIG_PTE_64BIT
Keep PTE_ATOMIC_UPDATES only for nohash/32 for !CONFIG_PTE_64BIT
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d6f8e1f46583f1842de24581a68b0496feb15516.1589866984.git.christophe.leroy@csgroup.eu
Allocate static page tables for the fixmap area. This allows
setting mappings through page tables before memblock is ready.
That's needed to use early_ioremap() early and to use standard
page mappings with fixmap.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4f4b1412d34de6801b8e925cb88fc69d056ff536.1589866984.git.christophe.leroy@csgroup.eu
Mapping RO data as ROX is not an issue since that data
cannot be modified to introduce an exploit.
PPC64 accepts to have RO data mapped ROX, as a trade off
between kernel size and strictness of protection.
On PPC32, kernel size is even more critical as amount of
memory is usually small.
Depending on the number of available IBATs, the last IBATs
might overflow the end of text. Only warn if it crosses
the end of RO data.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6499f8eeb2a36330e5c9fc1cee9a79374875bd54.1589866984.git.christophe.leroy@csgroup.eu
The 8xx is about to map kernel linear space and IMMR using huge
pages.
In order to display those pages properly, ptdump needs to handle
hugepd tables at PGD level.
For the time being do it only at PGD level. Further patches may
add handling of hugepd tables at lower level for other platforms
when needed in the future.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/630728289158dcfeb06b14d40ed7c4c4e7148cf1.1589866984.git.christophe.leroy@csgroup.eu
Commit 702f098052 ("powerpc/64s/exception: Remove lite interrupt
return") changed the interrupt return path to not restore non-volatile
registers by default, and explicitly restore them in paths where it is
required.
But it missed that the facility unavailable exception can sometimes
modify user registers, ie. when it does emulation of move from DSCR.
This is seen as a failure of the dscr_sysfs_thread_test:
test: dscr_sysfs_thread_test
[cpu 0] User DSCR should be 1 but is 0
failure: dscr_sysfs_thread_test
So restore non-volatile GPRs after facility unavailable exceptions.
Currently the hypervisor facility unavailable exception is also wired
up to call facility_unavailable_exception().
In practice we should never take a hypervisor facility unavailable
exception for the DSCR. On older bare metal systems we set HFSCR_DSCR
unconditionally in __init_HFSCR, or on newer systems it should be
enabled via the "data-stream-control-register" device tree CPU
feature.
Even if it's not, since commit f3c99f97a3 ("KVM: PPC: Book3S HV:
Don't access HFSCR, LPIDR or LPCR when running nested"), the KVM code
has unconditionally set HFSCR_DSCR when running guests.
So we should only get a hypervisor facility unavailable for the DSCR
if skiboot has disabled the "data-stream-control-register" feature,
and we are somehow in guest context but not via KVM.
Given all that, it should be unnecessary to add a restore of
non-volatile GPRs after the hypervisor facility exception, because we
never expect to hit that path. But equally we may as well add the
restore, because we never expect to hit that path, and if we ever did,
at least we would correctly restore the registers to their post
emulation state.
In future we can split the non-HV and HV facility unavailable handling
so that there is no emulation in the HV handler, and then remove the
restore for the HV case.
Fixes: 702f098052 ("powerpc/64s/exception: Remove lite interrupt return")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200526061808.2472279-1-mpe@ellerman.id.au
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au
