853a603030
1252069 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Biju Das
|
853a603030 |
irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type
RZ/G2L interrupt chips require that the interrupt is masked before changing
the NMI, IRQ, TINT interrupt settings. Aside of that, after setting an edge
trigger type it is required to clear the interrupt status register in order
to avoid spurious interrupts.
The current implementation fails to do either of that and therefore is
prone to generate spurious interrupts when setting the trigger type.
Address this by:
- Ensuring that the interrupt is masked at the chip level across the
update for the TINT chip
- Clearing the interrupt status register after updating the trigger mode
for edge type interrupts
[ tglx: Massaged changelog and reverted the spin_lock_irqsave() change as
the set_type() callback is always called with interrupts disabled. ]
Fixes:
|
||
|
Biju Das
|
b4b5cd61a6 |
irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi()
Rename rzg2l_irq_eoi()->rzg2l_clear_irq_int() and simplify the code by removing redundant priv local variable. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Biju Das
|
7cb6362c63 |
irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi()
Rename rzg2l_tint_eoi()->rzg2l_clear_tint_int() and simplify the code by removing redundant priv and hw_irq local variables. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> |
||
|
Biju Das
|
9eec61df55 |
irqchip/renesas-rzg2l: Flush posted write in irq_eoi()
The irq_eoi() callback of the RZ/G2L interrupt chip clears the relevant
interrupt cause bit in the TSCR register by writing to it.
This write is not sufficient because the write is posted and therefore not
guaranteed to immediately clear the bit. Due to that delay the CPU can
raise the just handled interrupt again.
Prevent this by reading the register back which causes the posted write to
be flushed to the hardware before the read completes.
Fixes:
|
||
Samuel Holland
|
ca5b0b717b |
irqchip/riscv-intc: Fix use of AIA interrupts 32-63 on riscv32
riscv_intc_custom_base is initialized to BITS_PER_LONG, so the second check passes even though AIA provides 64 interrupts. Adjust the condition to only check the custom range for interrupts outside the standard range, and adjust the standard range when AIA is available. Fixes: |
||
Linus Torvalds
|
4527e83780 |
Updates for the MSI interrupt subsystem and RISC-V initial MSI support:
- Core and platform-MSI
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
- Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
-----BEGIN PGP SIGNATURE-----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=7aXj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
||
|
Linus Torvalds
|
02d4df78c5 |
Updates for the interrupt subsystem:
- Core:
- Make affinity changes immediately effective for interrupt
threads. This reduces the impact on isolated CPUs as it pulls over the
thread right away instead of doing it after the next hardware
interrupt arrived.
- Cleanup and improvements for the interrupt chip simulator
- Deduplication of the interrupt descriptor initialization code so the
sparse and non-sparse mode share more code.
- Drivers:
- A set of conversions to platform_drivers::remove_new() which gets rid
of the pointless return value.
- A new driver for the Starfive JH8100 SoC
- Support for Amlogic-T7 SoCs
- Improvement for the interrupt handling and EOI management for the
loongson interrupt controller.
- The usual fixes and improvements all over the place.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmXt6RUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoRahEACenZz//vEy+n5t94UCNoYEBsqL4qsl
eHb2LPkOwJdzy0I0et8sSRfmjFgfmiB5vmcOtuTjbA+pAASMU16M5nU38dD4Qw7V
lwfutv3wb0XT7INslvrsEF4SvhapoiSBtzdK4IEVJysaHek/bbvZg8rot2tXTjCR
3sK4sMuWLXxB+MzcaYEXSZlIlsrXcARHYNVCbudsEqL2Rt7mGtBJBMIPAYXaWLMn
Y1B15huDNcj+Z9s/rbX218oSajEYJv24NE7JW/eYhG8Rv3yc+1zMTIARq35V77/3
KIV15XqKozkR4G8BEzQ1hUp6l1cggOjMslkwjyKnXTddkHQnQs5928/48y1qs4W0
IDpJqpPL30ckfzg/fUKfUU98t95qB4X55jmK3LuiWfdS8cfd65gq4Ro2bIszM1NQ
SYhcTvZRRcNJqlbO3rQfFAmVU0bvVyR3DlmrLzVl2tH5touwNBBQ/3D3o7CRGEns
37c07zjVZnir+HFmrtTKOiENTay+fHrtIw5dFf7FMqREpE4kL/nsgZfN0wgZPUHj
QGFExV/kJNSMvqwCz77uvHt6c5uoVZGn2j8iYAdqWVKYRcWCMids2gVEkc8QK4gQ
eWsIEAClIEjArPqpQzPE2v3a9puCmOpbHWRmU7VDtNka9/ur8qoU2KMXMJBySaL4
UKXfWYE+43RVbQ==
=AbVv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Make affinity changes take effect immediately for interrupt
threads. This reduces the impact on isolated CPUs as it pulls over
the thread right away instead of doing it after the next hardware
interrupt arrived.
- Cleanup and improvements for the interrupt chip simulator
- Deduplication of the interrupt descriptor initialization code so
the sparse and non-sparse mode share more code.
Drivers:
- A set of conversions to platform_drivers::remove_new() which gets
rid of the pointless return value.
- A new driver for the Starfive JH8100 SoC
- Support for Amlogic-T7 SoCs
- Improvement for the interrupt handling and EOI management for the
loongson interrupt controller.
- The usual fixes and improvements all over the place"
* tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
irqchip/ts4800: Convert to platform_driver::remove_new() callback
irqchip/stm32-exti: Convert to platform_driver::remove_new() callback
irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback
irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback
irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback
irqchip/pruss-intc: Convert to platform_driver::remove_new() callback
irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback
irqchip/madera: Convert to platform_driver::remove_new() callback
irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback
irqchip/keystone: Convert to platform_driver::remove_new() callback
irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback
irqchip/imx-intmux: Convert to platform_driver::remove_new() callback
irqchip/imgpdc: Convert to platform_driver::remove_new() callback
irqchip: Add StarFive external interrupt controller
dt-bindings: interrupt-controller: Add starfive,jh8100-intc
arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs
irqchip/meson-gpio: Add support for Amlogic-T7 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs
irqchip/vic: Fix a kernel-doc warning
genirq: Wake interrupt threads immediately when changing affinity
...
|
||
|
Linus Torvalds
|
045395d86a |
cgroup: Changes for 6.9
A quiet cycle. One trivial doc update patch. Two patches to drop now defunct memory_spread_slab feature from cgroup1 cpuset. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZe7MVQ4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGR59APwO8h/GCRH0KovpemkjsIHxicWMlvfHVleIdS4l FY7lLgD+JGucXcxd4YM/ZAZkj9pSUvrEm46n+Jrst7GFH8lfUQ0= =YY0C -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "A quiet cycle. One trivial doc update patch. Two patches to drop the now defunct memory_spread_slab feature from cgroup1 cpuset" * tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Mark memory_spread_slab as obsolete cgroup/cpuset: Remove cpuset_do_slab_mem_spread() docs: cgroup-v1: add missing code-block tags |
||
|
Linus Torvalds
|
1a1e09890c |
workqueue: BH workqueue conversions for v6.9
This pull request contains two patches that convert tasklet users to BH workqueue - backtractest and usb hcd. DM conversions are being routed through the respective subsystem tree. Hopefully, the next cycle will see a lot more conversions. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZe7KuA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGUmfAQC6bbrghugnvvAREeJSymM6aATfICTrN98FdBIC cRn5KgEAqDpKcFA2zbWXPPU7KGBjAAYX199XFc9+NqiXpvCfoA8= =uQz1 -----END PGP SIGNATURE----- Merge tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue BH conversions from Tejun Heo: "This contains two patches that convert tasklet users to BH workqueues: backtracetest and usb hcd. DM conversions are being routed through the respective subsystem tree. Hopefully, the next cycle will see a lot more conversions" * tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: usb: core: hcd: Convert from tasklet to BH workqueue backtracetest: Convert from tasklet to BH workqueue |
||
|
Linus Torvalds
|
ff887eb07c |
workqueue: Changes for v6.9
This cycle, a lot of workqueue changes including some that are significant and invasive. - During v6.6 cycle, unbound workqueues were updated so that they are more topology aware and flexible, which among other things improved workqueue behavior on modern multi-L3 CPUs. In the process, |
||
|
Linus Torvalds
|
8ede842f66 |
Rust changes for v6.9
Another routine one in terms of features. We got two version upgrades
this time, but in terms of lines, 'alloc' changes are not very large.
Toolchain and infrastructure:
- Upgrade to Rust 1.76.0.
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove two
more unstable features ('const_maybe_uninit_zeroed' and
'ptr_metadata') from the list, among other improvements.
- Mark 'rustc' (and others) invocations as recursive, which fixes a new
warning and prepares us for the future in case we eventually take
advantage of the Make jobserver.
'kernel' crate:
- Add the 'container_of!' macro.
- Stop using the unstable 'ptr_metadata' feature by employing the now
stable 'byte_sub' method to implement 'Arc::from_raw()'.
- Add the 'time' module with a 'msecs_to_jiffies()' conversion function
to begin with, to be used by Rust Binder.
- Add 'notify_sync()' and 'wait_interruptible_timeout()' methods to
'CondVar', to be used by Rust Binder.
- Update integer types for 'CondVar'.
- Rename 'wait_list' field to 'wait_queue_head' in 'CondVar'.
- Implement 'Display' and 'Debug' for 'BStr'.
- Add the 'try_from_foreign()' method to the 'ForeignOwnable' trait.
- Add reexports for macros so that they can be used from the right
module (in addition to the root).
- A series of code documentation improvements, including adding
intra-doc links, consistency improvements, typo fixes...
'macros' crate:
- Place generated 'init_module()' function in '.init.text'.
Documentation:
- Add documentation on Rust doctests and how they work.
-----BEGIN PGP SIGNATURE-----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=BAGo
-----END PGP SIGNATURE-----
Merge tag 'rust-6.9' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. We got two version upgrades
this time, but in terms of lines, 'alloc' changes are not very large.
Toolchain and infrastructure:
- Upgrade to Rust 1.76.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove
two more unstable features ('const_maybe_uninit_zeroed' and
'ptr_metadata') from the list, among other improvements
- Mark 'rustc' (and others) invocations as recursive, which fixes a
new warning and prepares us for the future in case we eventually
take advantage of the Make jobserver
'kernel' crate:
- Add the 'container_of!' macro
- Stop using the unstable 'ptr_metadata' feature by employing the now
stable 'byte_sub' method to implement 'Arc::from_raw()'
- Add the 'time' module with a 'msecs_to_jiffies()' conversion
function to begin with, to be used by Rust Binder
- Add 'notify_sync()' and 'wait_interruptible_timeout()' methods to
'CondVar', to be used by Rust Binder
- Update integer types for 'CondVar'
- Rename 'wait_list' field to 'wait_queue_head' in 'CondVar'
- Implement 'Display' and 'Debug' for 'BStr'
- Add the 'try_from_foreign()' method to the 'ForeignOwnable' trait
- Add reexports for macros so that they can be used from the right
module (in addition to the root)
- A series of code documentation improvements, including adding
intra-doc links, consistency improvements, typo fixes...
'macros' crate:
- Place generated 'init_module()' function in '.init.text'
Documentation:
- Add documentation on Rust doctests and how they work"
* tag 'rust-6.9' of https://github.com/Rust-for-Linux/linux: (29 commits)
rust: upgrade to Rust 1.76.0
kbuild: mark `rustc` (and others) invocations as recursive
rust: add `container_of!` macro
rust: str: implement `Display` and `Debug` for `BStr`
rust: module: place generated init_module() function in .init.text
rust: types: add `try_from_foreign()` method
docs: rust: Add description of Rust documentation test as KUnit ones
docs: rust: Move testing to a separate page
rust: kernel: stop using ptr_metadata feature
rust: kernel: add reexports for macros
rust: locked_by: shorten doclink preview
rust: kernel: remove unneeded doclink targets
rust: kernel: add doclinks
rust: kernel: add blank lines in front of code blocks
rust: kernel: mark code fragments in docs with backticks
rust: kernel: unify spelling of refcount in docs
rust: str: move SAFETY comment in front of unsafe block
rust: str: use `NUL` instead of 0 in doc comments
rust: kernel: add srctree-relative doclinks
rust: ioctl: end top-level module docs with full stop
...
|
||
|
Linus Torvalds
|
5a2a15cd7f |
Compiler Attributes changes for v6.9
A couple trivial changes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmXsVlcACgkQGXyLc2ht IW3yFRAApUQnxyEC4zZ7yqIiRemAzjVuP7LEN3fuG9/JH1phYJOZqUC+sDK5UHvp p0sLMTeX7VeyirWSB/eZD5lpDN5ZB1qfIiVJ4J5o5fQ7oJ6nk+PkdjWYaXkB0oKJ gtb4JKQxBLwJWLrN5scVYdKlSqQX/fTp49r1q+8CiOuvCLmPRGfF4OJxWZzzv0AM Ezv4Y4xjlrG5bA14zmo4pN1F5whhBf0TUU79Z+z9ketMNDLPsioEw+O24mVlsVLo DCHjGf0DVmhq2nj2QykgAoIq+7Yf6Pp/CcSmJfRFW1/8edEZpGObqNCXzitNgZFR /a5HdNfVgtTl03mQ2bBwJAd1myfjAewRiS/MlR3H6NuCdBwoIWHRNbLdCLqb7qY3 p5jSer4FVvDg8Qc89mgKULxIALtdOsqTgBs3iyack7w+yR7YmnlmaphNcx7IMSp3 8n5dnXDMOlPOB4U9E0Ixy7VK9Jx1RGAMKDETsaHTNRBUslYj55hDRH4PIePoiRFG yvWmyC/ZUbHt1L1hcgEsECrkT965VCq+pPg4pHtxadGREijVXGIF6QMjEfDkpaue KdI34sfRasLo83kQ4Yb3a4jE1XUl7I0TS6oXtwsFnpX0OQmQil/7CUzS7w8SJusE N3NGxrHesKOb/sPyCcGSXj5VnxPx50T4rTdXfKJGb5/94+oJt/Q= =dnO4 -----END PGP SIGNATURE----- Merge tag 'compiler-attributes-6.9' of https://github.com/ojeda/linux Pull compiler attributes update from Miguel Ojeda: "Trivial fixes to the __counted_by comments" * tag 'compiler-attributes-6.9' of https://github.com/ojeda/linux: Compiler Attributes: counted_by: fixup clang URL Compiler Attributes: counted_by: bump min gcc version |
||
|
Linus Torvalds
|
e5a3878c94 |
RCU pull request for v6.9
This pull request contains the following branches:
rcu-doc.2024.02.14a: Documentation updates.
rcu-nocb.2024.02.14a: RCU NOCB updates, code cleanups, unnecessary
barrier removals and minor bug fixes.
rcu-exp.2024.02.14a: RCU exp, fixing a circular dependency between
workqueue and RCU expedited callback handling.
rcu-tasks.2024.02.26a: RCU tasks, avoiding deadlocks in do_exit() when
calling synchronize_rcu_task() with a mutex hold, maintaining
real-time response in rcu_tasks_postscan() and a minor
fix for tasks trace quiescence check.
rcu-misc.2024.02.14a: Misc updates, comments and readibility
improvement, boot time parameter for lazy RCU and rcutorture
improvement.
-----BEGIN PGP SIGNATURE-----
iQFJBAABCAAzFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmXev80VHGJvcXVuLmZl
bmdAZ21haWwuY29tAAoJEEl56MO1B/q4UYgH/3CQF495sAS58M3tsy/HCMbq8DUb
9AoIKCdzqvN2xzjYxHHs59jA+MdEIOGbSIx1yWk0KZSqRSfxwd9nGbxO5EHbz6L3
gdZdOHbpZHPmtcUbdOfXDyhy4JaF+EBuRp9FOnsJ+w4/a0lFWMinaic4BweMEESS
y+gD5fcMzzCthedXn/HeQpeYUKOQ8Jpth5K5s4CkeaehEbdRVLFxjwFgQYd8Oeqn
0SfjNMRdBubDxydi4Rx1Ado7mKnfBHoot+9l0PHi6T2Rq89H0AUn/Dj3YOEkW7QT
aKRSVpPJnG3EFHUUzwprODAoQGOC6EpTVpxSqnpO2ewHnnMPhz/IXzRT86w=
=gypc
-----END PGP SIGNATURE-----
Merge tag 'rcu.next.v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux
Pull RCU updates from Boqun Feng:
- Eliminate deadlocks involving do_exit() and RCU tasks, by Paul:
Instead of SRCU read side critical sections, now a percpu list is
used in do_exit() for scaning yet-to-exit tasks
- Fix a deadlock due to the dependency between workqueue and RCU
expedited grace period, reported by Anna-Maria Behnsen and Thomas
Gleixner and fixed by Frederic: Now RCU expedited always uses its own
kthread worker instead of a workqueue
- RCU NOCB updates, code cleanups, unnecessary barrier removals and
minor bug fixes
- Maintain real-time response in rcu_tasks_postscan() and a minor fix
for tasks trace quiescence check
- Misc updates, comments and readibility improvement, boot time
parameter for lazy RCU and rcutorture improvement
- Documentation updates
* tag 'rcu.next.v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux: (34 commits)
rcu-tasks: Maintain real-time response in rcu_tasks_postscan()
rcu-tasks: Eliminate deadlocks involving do_exit() and RCU tasks
rcu-tasks: Maintain lists to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Initialize data to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Initialize callback lists at rcu_init() time
rcu-tasks: Add data to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Repair RCU Tasks Trace quiescence check
rcu/sync: remove un-used rcu_sync_enter_start function
rcutorture: Suppress rtort_pipe_count warnings until after stalls
srcu: Improve comments about acceleration leak
rcu: Provide a boot time parameter to control lazy RCU
rcu: Rename jiffies_till_flush to jiffies_lazy_flush
doc: Update checklist.rst discussion of callback execution
doc: Clarify use of slab constructors and SLAB_TYPESAFE_BY_RCU
context_tracking: Fix kerneldoc headers for __ct_user_{enter,exit}()
doc: Add EARLY flag to early-parsed kernel boot parameters
doc: Add CONFIG_RCU_STRICT_GRACE_PERIOD to checklist.rst
doc: Make checklist.rst note that spinlocks are implied RCU readers
doc: Make whatisRCU.rst note that spinlocks are RCU readers
doc: Spinlocks are implied RCU readers
...
|
||
|
Linus Torvalds
|
1ddeeb2a05 |
for-6.9/block-20240310
-----BEGIN PGP SIGNATURE-----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=WlVL
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
||
|
Linus Torvalds
|
d2c84bdce2 |
for-6.9/io_uring-20240310
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmXuD/AQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpsojEACNlJKqsebZv24szCR5ViBGqoDi/A5v5vZv 1p7f0sVgpwFLuDu3CCb9IG1tuAiuhBa5yvBKKpyGuGglQd+7Sxqsgdc2Bv/76D7S Ej/fc1x5dxuvAvAetYk4yH2idPhYIBVIx3g2oz44bO4Ur3jFZ/yXzp+JtuKEuTba 7kQmAXfN7c497XDsmSv1eJM/+D/LKjmvjqMX2gnXprw2qPgdAklXcUSnBYaS2JEt o4HGWAImJOV416d7QkOWgKfk6ksJbO3lFzQ6R+JdQCl6KVqc0+5u0oT06ZGVpSUf fQqfcV+cJw41dQB47Qr017ku0EdDI19L3YpL9/WOnNMBM421j1QER1cKiKfiHD2B LCOn+tvunxcGMzYonAFfgSF4XXFJWSK33TpvmmVsU3w0+YSC9oIqFfCxOdHuAJqB tHSuGHgzkufgqhNIQWHiWZEJJUW+MO4Dv2rUV6n+dfCz6JQG48Gs9clDv/tAEY4U 4NzErfYLCsWlNaMPQK1f/b9dWjBXAnpJA4yq8jPyYB3GqjnVuX3Ze14UfwOWgv0B E++qgPsh30ShbP/NRHqS9tNQC2hIy27x/jzpTyKwxuoSs/nyeZg7lFXIPaQQo7wt GZhGzsMasbhoylqblB171NFlxpRetY9aYvHZ3OfUP4xAt1THVOzR6hZrBurOKMv/ e8FBGBh/cg== =Hy// -----END PGP SIGNATURE----- Merge tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Make running of task_work internal loops more fair, and unify how the different methods deal with them (me) - Support for per-ring NAPI. The two minor networking patches are in a shared branch with netdev (Stefan) - Add support for truncate (Tony) - Export SQPOLL utilization stats (Xiaobing) - Multishot fixes (Pavel) - Fix for a race in manipulating the request flags via poll (Pavel) - Cleanup the multishot checking by making it generic, moving it out of opcode handlers (Pavel) - Various tweaks and cleanups (me, Kunwu, Alexander) * tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux: (53 commits) io_uring: Fix sqpoll utilization check racing with dying sqpoll io_uring/net: dedup io_recv_finish req completion io_uring: refactor DEFER_TASKRUN multishot checks io_uring: fix mshot io-wq checks io_uring/net: add io_req_msg_cleanup() helper io_uring/net: simplify msghd->msg_inq checking io_uring/kbuf: rename REQ_F_PARTIAL_IO to REQ_F_BL_NO_RECYCLE io_uring/net: remove dependency on REQ_F_PARTIAL_IO for sr->done_io io_uring/net: correctly handle multishot recvmsg retry setup io_uring/net: clear REQ_F_BL_EMPTY in the multishot retry handler io_uring: fix io_queue_proc modifying req->flags io_uring: fix mshot read defer taskrun cqe posting io_uring/net: fix overflow check in io_recvmsg_mshot_prep() io_uring/net: correct the type of variable io_uring/sqpoll: statistics of the true utilization of sq threads io_uring/net: move recv/recvmsg flags out of retry loop io_uring/kbuf: flag request if buffer pool is empty after buffer pick io_uring/net: improve the usercopy for sendmsg/recvmsg io_uring/net: move receive multishot out of the generic msghdr path io_uring/net: unify how recvmsg and sendmsg copy in the msghdr ... |
||
|
Linus Torvalds
|
0f1a876682 |
vfs-6.9.uuid
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem5LwAKCRCRxhvAZXjc onZsAQCjMNabNWAty2VBAQrNIpGkZ+AMA2DxEajPldaPiJH5zQEA9ea7feB3T47i NUrXXfMQ5DSop+k5Y65pPkEpbX4rhQo= =NZgd -----END PGP SIGNATURE----- Merge tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs uuid updates from Christian Brauner: "This adds two new ioctl()s for getting the filesystem uuid and retrieving the sysfs path based on the path of a mounted filesystem. Getting the filesystem uuid has been implemented in filesystem specific code for a while it's now lifted as a generic ioctl" * tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: xfs: add support for FS_IOC_GETFSSYSFSPATH fs: add FS_IOC_GETFSSYSFSPATH fat: Hook up sb->s_uuid fs: FS_IOC_GETUUID ovl: convert to super_set_uuid() fs: super_set_uuid() |
||
|
Linus Torvalds
|
910202f00a |
vfs-6.9.super
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4DwAKCRCRxhvAZXjc
ooTRAQDRI6Qz6wJym5Yblta8BScMGbt/SgrdgkoCvT6y83MtqwD+Nv/AZQzi3A3l
9NdULtniW1reuCYkc8R7dYM8S+yAwAc=
=Y1qX
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
||
|
Linus Torvalds
|
0c750012e8 |
vfs-6.9.file
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4tQAKCRCRxhvAZXjc ohnfAP4sm946PZfiC4y5Euk96WDC3hC8WCSBar+fpFmYVzeD9wEAy+NVCsjkMElz vqNxwFULUwQjFxxvsM9gvhrgGUud1AE= =UZk/ -----END PGP SIGNATURE----- Merge tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull file locking updates from Christian Brauner: "A few years ago struct file_lock_context was added to allow for separate lists to track different types of file locks instead of using a singly-linked list for all of them. Now leases no longer need to be tracked using struct file_lock. However, a lot of the infrastructure is identical for leases and locks so separating them isn't trivial. This splits a group of fields used by both file locks and leases into a new struct file_lock_core. The new core struct is embedded in struct file_lock. Coccinelle was used to convert a lot of the callers to deal with the move, with the remaining 25% or so converted by hand. Afterwards several internal functions in fs/locks.c are made to work with struct file_lock_core. Ultimately this allows to split struct file_lock into struct file_lock and struct file_lease. The file lease APIs are then converted to take struct file_lease" * tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits) filelock: fix deadlock detection in POSIX locking filelock: always define for_each_file_lock() smb: remove redundant check filelock: don't do security checks on nfsd setlease calls filelock: split leases out of struct file_lock filelock: remove temporary compatibility macros smb/server: adapt to breakup of struct file_lock smb/client: adapt to breakup of struct file_lock ocfs2: adapt to breakup of struct file_lock nfsd: adapt to breakup of struct file_lock nfs: adapt to breakup of struct file_lock lockd: adapt to breakup of struct file_lock fuse: adapt to breakup of struct file_lock gfs2: adapt to breakup of struct file_lock dlm: adapt to breakup of struct file_lock ceph: adapt to breakup of struct file_lock afs: adapt to breakup of struct file_lock 9p: adapt to breakup of struct file_lock filelock: convert seqfile handling to use file_lock_core filelock: convert locks_translate_pid to take file_lock_core ... |
||
|
Linus Torvalds
|
b5683a37c8 |
vfs-6.9.pidfd
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4/wAKCRCRxhvAZXjc
opnBAQCaQWwxjT0VLHebPniw6tel/KYlZ9jH9kBQwLrk1pembwEA+BsCY2C8YS4a
75v9jOPxr+Z8j1SjxwwubcONPyqYXwQ=
=+Wa3
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.pidfd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pdfd updates from Christian Brauner:
- Until now pidfds could only be created for thread-group leaders but
not for threads. There was no technical reason for this. We simply
had no users that needed support for this. Now we do have users that
need support for this.
This introduces a new PIDFD_THREAD flag for pidfd_open(). If that
flag is set pidfd_open() creates a pidfd that refers to a specific
thread.
In addition, we now allow clone() and clone3() to be called with
CLONE_PIDFD | CLONE_THREAD which wasn't possible before.
A pidfd that refers to an individual thread differs from a pidfd that
refers to a thread-group leader:
(1) Pidfds are pollable. A task may poll a pidfd and get notified
when the task has exited.
For thread-group leader pidfds the polling task is woken if the
thread-group is empty. In other words, if the thread-group
leader task exits when there are still threads alive in its
thread-group the polling task will not be woken when the
thread-group leader exits but rather when the last thread in the
thread-group exits.
For thread-specific pidfds the polling task is woken if the
thread exits.
(2) Passing a thread-group leader pidfd to pidfd_send_signal() will
generate thread-group directed signals like kill(2) does.
Passing a thread-specific pidfd to pidfd_send_signal() will
generate thread-specific signals like tgkill(2) does.
The default scope of the signal is thus determined by the type
of the pidfd.
Since use-cases exist where the default scope of the provided
pidfd needs to be overriden the following flags are added to
pidfd_send_signal():
- PIDFD_SIGNAL_THREAD
Send a thread-specific signal.
- PIDFD_SIGNAL_THREAD_GROUP
Send a thread-group directed signal.
- PIDFD_SIGNAL_PROCESS_GROUP
Send a process-group directed signal.
The scope change will only work if the struct pid is actually
used for this scope.
For example, in order to send a thread-group directed signal the
provided pidfd must be used as a thread-group leader and
similarly for PIDFD_SIGNAL_PROCESS_GROUP the struct pid must be
used as a process group leader.
- Move pidfds from the anonymous inode infrastructure to a tiny pseudo
filesystem. This will unblock further work that we weren't able to do
simply because of the very justified limitations of anonymous inodes.
Moving pidfds to a tiny pseudo filesystem allows for statx on pidfds
to become useful for the first time. They can now be compared by
inode number which are unique for the system lifetime.
Instead of stashing struct pid in file->private_data we can now stash
it in inode->i_private. This makes it possible to introduce concepts
that operate on a process once all file descriptors have been closed.
A concrete example is kill-on-last-close. Another side-effect is that
file->private_data is now freed up for per-file options for pidfds.
Now, each struct pid will refer to a different inode but the same
struct pid will refer to the same inode if it's opened multiple
times. In contrast to now where each struct pid refers to the same
inode.
The tiny pseudo filesystem is not visible anywhere in userspace
exactly like e.g., pipefs and sockfs. There's no lookup, there's no
complex inode operations, nothing. Dentries and inodes are always
deleted when the last pidfd is closed.
We allocate a new inode and dentry for each struct pid and we reuse
that inode and dentry for all pidfds that refer to the same struct
pid. The code is entirely optional and fairly small. If it's not
selected we fallback to anonymous inodes. Heavily inspired by nsfs.
The dentry and inode allocation mechanism is moved into generic
infrastructure that is now shared between nsfs and pidfs. The
path_from_stashed() helper must be provided with a stashing location,
an inode number, a mount, and the private data that is supposed to be
used and it will provide a path that can be passed to dentry_open().
The helper will try retrieve an existing dentry from the provided
stashing location. If a valid dentry is found it is reused. If not a
new one is allocated and we try to stash it in the provided location.
If this fails we retry until we either find an existing dentry or the
newly allocated dentry could be stashed. Subsequent openers of the
same namespace or task are then able to reuse it.
- Currently it is only possible to get notified when a task has exited,
i.e., become a zombie and userspace gets notified with EPOLLIN. We
now also support waiting until the task has been reaped, notifying
userspace with EPOLLHUP.
- Ensure that ESRCH is reported for getfd if a task is exiting instead
of the confusing EBADF.
- Various smaller cleanups to pidfd functions.
* tag 'vfs-6.9.pidfd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
libfs: improve path_from_stashed()
libfs: add stashed_dentry_prune()
libfs: improve path_from_stashed() helper
pidfs: convert to path_from_stashed() helper
nsfs: convert to path_from_stashed() helper
libfs: add path_from_stashed()
pidfd: add pidfs
pidfd: move struct pidfd_fops
pidfd: allow to override signal scope in pidfd_send_signal()
pidfd: change pidfd_send_signal() to respect PIDFD_THREAD
signal: fill in si_code in prepare_kill_siginfo()
selftests: add ESRCH tests for pidfd_getfd()
pidfd: getfd should always report ESRCH if a task is exiting
pidfd: clone: allow CLONE_THREAD | CLONE_PIDFD together
pidfd: exit: kill the no longer used thread_group_exited()
pidfd: change do_notify_pidfd() to use __wake_up(poll_to_key(EPOLLIN))
pid: kill the obsolete PIDTYPE_PID code in transfer_pid()
pidfd: kill the no longer needed do_notify_pidfd() in de_thread()
pidfd_poll: report POLLHUP when pid_task() == NULL
pidfd: implement PIDFD_THREAD flag for pidfd_open()
...
|
||
|
Linus Torvalds
|
54126fafea |
vfs-6.9.iomap
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4UQAKCRCRxhvAZXjc ouERAQDg63R9s3bKmUgGqngf9cfr//VCTE+WVARwOUTdn2iDbwEA1IME7X1kL/Vz EdhEjyqO6xom+ao/Vqxe0XIDNz70vgs= =8RdE -----END PGP SIGNATURE----- Merge tag 'vfs-6.9.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull iomap updates from Christian Brauner: - Restore read-write hints in struct bio through the bi_write_hint member for the sake of UFS devices in mobile applications. This can result in up to 40% lower write amplification in UFS devices. The patch series that builds on this will be coming in via the SCSI maintainers (Bart) - Overhaul the iomap writeback code. Afterwards ->map_blocks() is able to map multiple blocks at once as long as they're in the same folio. This reduces CPU usage for buffered write workloads on e.g., xfs on systems with lots of cores (Christoph) - Record processed bytes in iomap_iter() trace event (Kassey) - Extend iomap_writepage_map() trace event after Christoph's ->map_block() changes to map mutliple blocks at once (Zhang) * tag 'vfs-6.9.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits) iomap: Add processed for iomap_iter iomap: add pos and dirty_len into trace_iomap_writepage_map block, fs: Restore the per-bio/request data lifetime fields fs: Propagate write hints to the struct block_device inode fs: Move enum rw_hint into a new header file fs: Split fcntl_rw_hint() fs: Verify write lifetime constants at compile time fs: Fix rw_hint validation iomap: pass the length of the dirty region to ->map_blocks iomap: map multiple blocks at a time iomap: submit ioends immediately iomap: factor out a iomap_writepage_map_block helper iomap: only call mapping_set_error once for each failed bio iomap: don't chain bios iomap: move the iomap_sector sector calculation out of iomap_add_to_ioend iomap: clean up the iomap_alloc_ioend calling convention iomap: move all remaining per-folio logic into iomap_writepage_map iomap: factor out a iomap_writepage_handle_eof helper iomap: move the PF_MEMALLOC check to iomap_writepages iomap: move the io_folios field out of struct iomap_ioend ... |
||
|
Linus Torvalds
|
77417942e4 |
vfs-6.9.ntfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem42QAKCRCRxhvAZXjc
opOtAQDUkiJNaOu3fR6ENLvDZSFmaI2jQXIL8ulHYpEiFrXmKwD9EZQ8bmEYU7uO
WN4VM8p8UwQ7BmIV9b+jvwciF8Qi8QI=
=T03q
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ntfs update from Christian Brauner:
"This removes the old ntfs driver. The new ntfs3 driver is a full
replacement that was merged over two years ago. We've went through
various userspace and either they use ntfs3 or they use the fuse
version of ntfs and thus build neither ntfs nor ntfs3. I think that's
a clear sign that we should risk removing the legacy ntfs driver.
Quoting from Arch Linux and Debian:
- Debian does neither build the legacy ntfs nor the new ntfs3:
"Not currently built with Debian's kernel packages, 'ntfs' has been
symlinked to 'ntfs-3g' as it relates to fstab and mount commands.
Debian kernels are built without support of the ntfs3 driver
developed by Paragon Software." (cf. [2])
- Archlinux provides ntfs3 as their default since 5.15:
"All officially supported kernels with versions 5.15 or newer are
built with CONFIG_NTFS3_FS=m and thus support it. Before 5.15,
NTFS read and write support is provided by the NTFS-3G FUSE file
system." (cf. [1]).
It's unmaintained apart from various odd fixes as well. Worst case we
have to reintroduce it if someone really has a valid dependency on it.
But it's worth trying to see whether we can remove it"
Link: https://wiki.archlinux.org/title/NTFS [1]
Link: https://wiki.debian.org/NTFS [2]
* tag 'vfs-6.9.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: remove NTFS classic from docum. index
fs: Remove NTFS classic
|
||
|
Linus Torvalds
|
7ea65c89d8 |
vfs-6.9.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem3wQAKCRCRxhvAZXjc
otRMAQDeo8qsuuIAcS2KUicKqZR5yMVvrY9r4sQzf7YRcJo5HQD+NQXkKwQuv1VO
OUeScsic/+I+136AgdjWnlEYO5dp0go=
=4WKU
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
||
|
Linus Torvalds
|
97ec9715a8 |
linux_kselftest-kunit-6.9-rc1
This KUnit next update for Linux 6.9-rc1 consists of:
-- fix to make kunit_bus_type const
-- kunit tool change to Print UML command
-- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching
from using a platform_device, to a dedicated bus and device type
used by kunit. kunit devices don't set DMA mask and this caused
regression on some drm tests as they can't allocate DMA buffers.
Fix this problem by setting DMA masks on the kunit device during
initialization.
-- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit
log macros) already use the __printf() gcc attribute to ensure
the format specifiers are valid, but those which could fail the
test, and hence used __kunit_do_failed_assertion() behind the scenes,
did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A 9 patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmXpHUsACgkQCwJExA0N
QxxucA//VQt+qPeYHysK75Vu9icGGD/apxwMQiKIygVf8Mxg9IN3L7mJDDRIJj3h
kAY2yJG9MxiezvTK58pqV38A4l1pB2L/qqyDhdFbgD6XSgJS5beNh4Sne5gL2Okw
lHJkkZGj+g65UKTIbzhMFVzPsHPvJLdJAG2GSJcS6m2GfaSCBoOmRvugZ1OM40d0
ruxU6/ucR6u8jtN7fUTEuOSpfngJrUpBGer4i4+qC4mlI26XZ96oh35gFJTsE/CK
2WAXqv+Y9WhdFTihMHUcy11CWEM7XrkSXdp5GsdEOvg2SpqyP6C7kVCZ9aYV0FFe
LOo3D3rCA+WggMI5wJ51P0F3KkHu+mr+XBcl3TQ1de6mnX4+qZKJSyCt+69PzeIi
3TGWGO9lKkFrZ4StYdfCy8M/ABIpWq/UqIQAPOYtpQAEkGSj7H6J4OK9SG3oH1Oa
Jnn+yeTDr6B7v0gzkS57wBZg10uL+FG1MoOYqi7p1ZbyHc1lOPbx5AboPAh20cqW
h4UEIg50aGvHT6VjAidzI/CfZDmgkusCEnip0c2HaCg+AMi03JD1lQZTOuM9S6os
dkFrPoDGXyBQytyJmdWi6GKULn3DG8llFKDEGZnyYgszQS8hw21iqmK5/Kuit+sN
oJpjdSmXwoG5h6R9hUWnz+NcjNe44F4P88agVyrBYk2nZu97IiY=
=ilEb
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- fix to make kunit_bus_type const
- kunit tool change to Print UML command
- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching from
using a platform_device, to a dedicated bus and device type used by
kunit. kunit devices don't set DMA mask and this caused regression on
some drm tests as they can't allocate DMA buffers. Fix this problem
by setting DMA masks on the kunit device during initialization.
- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit log
macros) already use the __printf() gcc attribute to ensure the format
specifiers are valid, but those which could fail the test, and hence
used __kunit_do_failed_assertion() behind the scenes, did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A nine-patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
* tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Annotate _MSG assertion variants with gnu printf specifiers
drm: tests: Fix invalid printf format specifiers in KUnit tests
drm/xe/tests: Fix printf format specifiers in xe_migrate test
net: test: Fix printf format specifier in skb_segment kunit test
rtc: test: Fix invalid format specifier.
time: test: Fix incorrect format specifier
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
lib/cmdline: Fix an invalid format specifier in an assertion msg
kunit: test: Log the correct filter string in executor_test
kunit: Setup DMA masks on the kunit device
kunit: make kunit_bus_type const
kunit: Mark filter* params as rw
kunit: tool: Print UML command
|
||
|
Linus Torvalds
|
d451b075f7 |
linux_kselftest-next-6.9-rc1
This kselftest next update for Linux 6.9-rc1 consists of:
-- livepatch restructuring to move the module out of lib to be
built as a out-of-tree modules during kselftest build. This
change makes it easier change, debug and rebuild the tests by
running make on the selftests/livepatch directory, which is not
currently possible since the modules on lib/livepatch are build
and installed using the main makefile modules target.
-- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
-- resctrl test restructuring and new non-contiguous CBMs CAT test
-- new ktap_helpers to print diagnostic messages, pass/fail tests
based on exit code, abort test, and finish the test.
-- a new test verify power supply properties.
-- a new ftrace to exercise function tracer across cpu hotplug.
-- timeout increase for mqueue test to allow the test to run on
i3.metal AWS instances.
-- minor spelling corrections in several tests.
-- missing gitignore files and changes to existing gitignore files.
-----BEGIN PGP SIGNATURE-----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=G+DO
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
- livepatch restructuring to move the module out of lib to be built as
a out-of-tree modules during kselftest build. This makes it easier
change, debug and rebuild the tests by running make on the
selftests/livepatch directory, which is not currently possible since
the modules on lib/livepatch are build and installed using the main
makefile modules target.
- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
- resctrl test restructuring and new non-contiguous CBMs CAT test
- new ktap_helpers to print diagnostic messages, pass/fail tests based
on exit code, abort test, and finish the test.
- a new test verify power supply properties.
- a new ftrace to exercise function tracer across cpu hotplug.
- timeout increase for mqueue test to allow the test to run on i3.metal
AWS instances.
- minor spelling corrections in several tests.
- missing gitignore files and changes to existing gitignore files.
* tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (57 commits)
kselftest: Add basic test for probing the rust sample modules
selftests: lib.mk: Do not process TEST_GEN_MODS_DIR
selftests: livepatch: Avoid running the tests if kernel-devel is missing
selftests: livepatch: Add initial .gitignore
selftests/resctrl: Add non-contiguous CBMs CAT test
selftests/resctrl: Add resource_info_file_exists()
selftests/resctrl: Split validate_resctrl_feature_request()
selftests/resctrl: Add a helper for the non-contiguous test
selftests/resctrl: Add test groups and name L3 CAT test L3_CAT
selftests: sched: Fix spelling mistake "hiearchy" -> "hierarchy"
selftests/mqueue: Set timeout to 180 seconds
selftests/ftrace: Add test to exercize function tracer across cpu hotplug
selftest: ftrace: fix minor typo in log
selftests: thermal: intel: workload_hint: add missing gitignore
selftests: thermal: intel: power_floor: add missing gitignore
selftests: uevent: add missing gitignore
selftests: Add test to verify power supply properties
selftests: ktap_helpers: Add a helper to finish the test
selftests: ktap_helpers: Add a helper to abort the test
selftests: ktap_helpers: Add helper to pass/fail test based on exit code
...
|
||
|
Linus Torvalds
|
e8f897f4af | Linux 6.8 | ||
|
Linus Torvalds
|
fa4b851b4a |
Tracing fixes for v6.8-rc7:
- Do not allow large strings (> 4096) as single write to trace_marker The size of a string written into trace_marker was determined by the size of the sub-buffer in the ring buffer. That size is dependent on the PAGE_SIZE of the architecture as it can be mapped into user space. But on PowerPC, where PAGE_SIZE is 64K, that made the limit of the string of writing into trace_marker 64K. One of the selftests looks at the size of the ring buffer sub-buffers and writes that plus more into the trace_marker. The write will take what it can and report back what it consumed so that the user space application (like echo) will write the rest of the string. The string is stored in the ring buffer and can be read via the "trace" or "trace_pipe" files. The reading of the ring buffer uses vsnprintf(), which uses a precision "%.*s" to make sure it only reads what is stored in the buffer, as a bug could cause the string to be non terminated. With the combination of the precision change and the PAGE_SIZE of 64K allowing huge strings to be added into the ring buffer, plus the test that would actually stress that limit, a bug was reported that the precision used was too big for "%.*s" as the string was close to 64K in size and the max precision of vsnprintf is 32K. Linus suggested not to have that precision as it could hide a bug if the string was again stored without a nul byte. Another issue that was brought up is that the trace_seq buffer is also based on PAGE_SIZE even though it is not tied to the architecture limit like the ring buffer sub-buffer is. Having it be 64K * 2 is simply just too big and wasting memory on systems with 64K page sizes. It is now hardcoded to 8K which is what all other architectures with 4K PAGE_SIZE has. Finally, the write to trace_marker is now limited to 4K as there is no reason to write larger strings into trace_marker. - ring_buffer_wait() should not loop. The ring_buffer_wait() does not have the full context (yet) on if it should loop or not. Just exit the loop as soon as its woken up and let the callers decide to loop or not (they already do, so it's a bit redundant). - Fix shortest_full field to be the smallest amount in the ring buffer that a waiter is waiting for. The "shortest_full" field is updated when a new waiter comes in and wants to wait for a smaller amount of data in the ring buffer than other waiters. But after all waiters are woken up, it's not reset, so if another waiter comes in wanting to wait for more data, it will be woken up when the ring buffer has a smaller amount from what the previous waiters were waiting for. - The wake up all waiters on close is incorrectly called frome .release() and not from .flush() so it will never wake up any waiters as the .release() will not get called until all .read() calls are finished. And the wakeup is for the waiters in those .read() calls. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZe3j6xQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qmYOAQD6rPZ+ILqHmRQMZjsxaasBeVYidspY wj3fRGzwfiB6fgEAkIeA7FOrkOK0CuG8R+2AtQNF5ZjXdmfZdiYQD1/EjQU= =Hqlf -----END PGP SIGNATURE----- Merge tag 'trace-ring-buffer-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Do not allow large strings (> 4096) as single write to trace_marker The size of a string written into trace_marker was determined by the size of the sub-buffer in the ring buffer. That size is dependent on the PAGE_SIZE of the architecture as it can be mapped into user space. But on PowerPC, where PAGE_SIZE is 64K, that made the limit of the string of writing into trace_marker 64K. One of the selftests looks at the size of the ring buffer sub-buffers and writes that plus more into the trace_marker. The write will take what it can and report back what it consumed so that the user space application (like echo) will write the rest of the string. The string is stored in the ring buffer and can be read via the "trace" or "trace_pipe" files. The reading of the ring buffer uses vsnprintf(), which uses a precision "%.*s" to make sure it only reads what is stored in the buffer, as a bug could cause the string to be non terminated. With the combination of the precision change and the PAGE_SIZE of 64K allowing huge strings to be added into the ring buffer, plus the test that would actually stress that limit, a bug was reported that the precision used was too big for "%.*s" as the string was close to 64K in size and the max precision of vsnprintf is 32K. Linus suggested not to have that precision as it could hide a bug if the string was again stored without a nul byte. Another issue that was brought up is that the trace_seq buffer is also based on PAGE_SIZE even though it is not tied to the architecture limit like the ring buffer sub-buffer is. Having it be 64K * 2 is simply just too big and wasting memory on systems with 64K page sizes. It is now hardcoded to 8K which is what all other architectures with 4K PAGE_SIZE has. Finally, the write to trace_marker is now limited to 4K as there is no reason to write larger strings into trace_marker. - ring_buffer_wait() should not loop. The ring_buffer_wait() does not have the full context (yet) on if it should loop or not. Just exit the loop as soon as its woken up and let the callers decide to loop or not (they already do, so it's a bit redundant). - Fix shortest_full field to be the smallest amount in the ring buffer that a waiter is waiting for. The "shortest_full" field is updated when a new waiter comes in and wants to wait for a smaller amount of data in the ring buffer than other waiters. But after all waiters are woken up, it's not reset, so if another waiter comes in wanting to wait for more data, it will be woken up when the ring buffer has a smaller amount from what the previous waiters were waiting for. - The wake up all waiters on close is incorrectly called frome .release() and not from .flush() so it will never wake up any waiters as the .release() will not get called until all .read() calls are finished. And the wakeup is for the waiters in those .read() calls. * tag 'trace-ring-buffer-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Use .flush() call to wake up readers ring-buffer: Fix resetting of shortest_full ring-buffer: Fix waking up ring buffer readers tracing: Limit trace_marker writes to just 4K tracing: Limit trace_seq size to just 8K and not depend on architecture PAGE_SIZE tracing: Remove precision vsnprintf() check from print event |
||
|
Linus Torvalds
|
210ee636c4 |
phy third set of fixes for 6.8
- fixes for Qualcomm qmp-combo driver for ordering of drm and type-c
switch registartion due to drivers might not probe defer
after having registered child devices to avoid triggering a probe
deferral loop. This fixes internal display on Lenovo ThinkPad X13s
-----BEGIN PGP SIGNATURE-----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=k3pB
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- fixes for Qualcomm qmp-combo driver for ordering of drm and type-c
switch registartion due to drivers might not probe defer after having
registered child devices to avoid triggering a probe deferral loop.
This fixes internal display on Lenovo ThinkPad X13s
* tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-combo: fix type-c switch registration
phy: qcom-qmp-combo: fix drm bridge registration
|
||
Steven Rostedt (Google)
|
e5d7c19165 |
tracing: Use .flush() call to wake up readers
The .release() function does not get called until all readers of a file
descriptor are finished.
If a thread is blocked on reading a file descriptor in ring_buffer_wait(),
and another thread closes the file descriptor, it will not wake up the
other thread as ring_buffer_wake_waiters() is called by .release(), and
that will not get called until the .read() is finished.
The issue originally showed up in trace-cmd, but the readers are actually
other processes with their own file descriptors. So calling close() would wake
up the other tasks because they are blocked on another descriptor then the
one that was closed(). But there's other wake ups that solve that issue.
When a thread is blocked on a read, it can still hang even when another
thread closed its descriptor.
This is what the .flush() callback is for. Have the .flush() wake up the
readers.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202432.107909457@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes:
|
||
|
Steven Rostedt (Google)
|
68282dd930 |
ring-buffer: Fix resetting of shortest_full
The "shortest_full" variable is used to keep track of the waiter that is
waiting for the smallest amount on the ring buffer before being woken up.
When a tasks waits on the ring buffer, it passes in a "full" value that is
a percentage. 0 means wake up on any data. 1-100 means wake up from 1% to
100% full buffer.
As all waiters are on the same wait queue, the wake up happens for the
waiter with the smallest percentage.
The problem is that the smallest_full on the cpu_buffer that stores the
smallest amount doesn't get reset when all the waiters are woken up. It
does get reset when the ring buffer is reset (echo > /sys/kernel/tracing/trace).
This means that tasks may be woken up more often then when they want to
be. Instead, have the shortest_full field get reset just before waking up
all the tasks. If the tasks wait again, they will update the shortest_full
before sleeping.
Also add locking around setting of shortest_full in the poll logic, and
change "work" to "rbwork" to match the variable name for rb_irq_work
structures that are used in other places.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.948914369@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes:
|
||
|
Linus Torvalds
|
137e0ec05a |
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not writable
from userspace, so there would be no way to write to a read-only
guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an atomic access.
- Check for mmu_notifier invalidation events before faulting in the pfn,
and before acquiring mmu_lock, to avoid unnecessary work and lock
contention with preemptible kernels (including CONFIG_PREEMPT_DYNAMIC
in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will be
re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region() before
dropping kvm->lock, to avoid a race with unregistering of the same region
and the consequent use-after-free issue.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmXskdYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN1TAf/SUGf4QuYG7nnfgWDR+goFO6Gx7NE
pJr3kAwv6d2f+qTlURfGjnX929pgZDLgoTkXTNeZquN6LjgownxMjBIpymVobvAD
AKvqJS/ECpryuehXbeqlxJxJn+TrxJ5r4QeNILMHc3AOZoiUqM6xl3zFfXWDNWVo
IazwT8P3d8wxiHAxv1eG6OVWHxbcg31068FVKRX3f/bWPbVwROJrPkCopmz2BJvU
6KYdYcn2rkpDTEM3ouDC/6gxJ9vpSY3+nW7Q7dNtGtOH2+BddfSA6I0rphCQWCNs
uXOxd5bDrC+KmkiULTPostuvwBgIm1k9wC2kW9A4P2VEf6Ay+ZHEdAOBJQ==
=+MT/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
|
||
|
Steven Rostedt (Google)
|
b359457368 |
ring-buffer: Fix waking up ring buffer readers
A task can wait on a ring buffer for when it fills up to a specific
watermark. The writer will check the minimum watermark that waiters are
waiting for and if the ring buffer is past that, it will wake up all the
waiters.
The waiters are in a wait loop, and will first check if a signal is
pending and then check if the ring buffer is at the desired level where it
should break out of the loop.
If a file that uses a ring buffer closes, and there's threads waiting on
the ring buffer, it needs to wake up those threads. To do this, a
"wait_index" was used.
Before entering the wait loop, the waiter will read the wait_index. On
wakeup, it will check if the wait_index is different than when it entered
the loop, and will exit the loop if it is. The waker will only need to
update the wait_index before waking up the waiters.
This had a couple of bugs. One trivial one and one broken by design.
The trivial bug was that the waiter checked the wait_index after the
schedule() call. It had to be checked between the prepare_to_wait() and
the schedule() which it was not.
The main bug is that the first check to set the default wait_index will
always be outside the prepare_to_wait() and the schedule(). That's because
the ring_buffer_wait() doesn't have enough context to know if it should
break out of the loop.
The loop itself is not needed, because all the callers to the
ring_buffer_wait() also has their own loop, as the callers have a better
sense of what the context is to decide whether to break out of the loop
or not.
Just have the ring_buffer_wait() block once, and if it gets woken up, exit
the function and let the callers decide what to do next.
Link: https://lore.kernel.org/all/CAHk-=whs5MdtNjzFkTyaUy=vHi=qwWgPi0JgTe6OYUYMNSRZfg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.792933613@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes:
|
||
|
Linus Torvalds
|
005f6f34bd |
Two patches from Heiner for the i801 are targeting muxes
discovered while working on some other features. Essentially, there is a reordering when adding optional slaves and proper cleanup upon registering a mux device. Christophe fixes the exit path in the wmt driver that was leaving the clocks hanging, and the last fix from Tommy avoids false error reports in IRQ. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmXsmS0ACgkQFA3kzBSg Kbb0JBAAog+Ih7J/V0CB915BLvAtO08vUnn9bzsEIunWSp/lY+FhGhrJ2fX0gW3/ 3UnFoH3zs5T6z8gxpc8QdkJ81v5pqjvkap4gKfT25suT5FUpcu9La65jMI+dITR1 vmYbVZlpNqyXuRQG/RVEPJV6vttjkbt7YPcCYx0lhlcYsENt7+NoW5fEHj4gVqST TP4q2UaTsSbItDaU36cdGDNx/makL8TZgkoAunQ+vIPNUT6ssdeCf1+DwAIrbtjo I7LwtMnraHf53rw3+HVJLabV2YhRNpt6NlPPwFS5s/pFfPdSIJSzsplviNJ4sWMU /K9XBPwBjk8GTE2loe2dDwaZsMo2U+MMA8x3t8T2WND9Q8jcz0BLj1sNRT2yB49g KhBoUI7moSViYp/6xibiO7879/w5rm3rOBfv5nJDSbp/Hm5J9wW4ioDPy1eSLmsG Tnj+wJHQ+BY/s/9jz2sSasFFJi2UTufusWbluc00C1iBkeDbY2Gas/ZTu85ql3PC hI4AWLOt9OYhQ2pqI/cF+MV+BwtXHs62AkS3o16VBZcwJuCxZarecIcMCBcuhCxh FNv/fSR39OJOlwe+wiX6M0XuR1GxfnEdgCndD2wDggRNyVBfFlhh1h/CeWsnpmsW 9lNnfVPFHZ39RTp9HazZB5QPssXkkg9cEelXKZE4z4XOwG+OolQ= =8AoZ -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two patches from Heiner for the i801 are targeting muxes discovered while working on some other features. Essentially, there is a reordering when adding optional slaves and proper cleanup upon registering a mux device. Christophe fixes the exit path in the wmt driver that was leaving the clocks hanging, and the last fix from Tommy avoids false error reports in IRQ" * tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: aspeed: Fix the dummy irq expected print i2c: wmt: Fix an error handling path in wmt_i2c_probe() i2c: i801: Avoid potential double call to gpiod_remove_lookup_table i2c: i801: Fix using mux_pdev before it's set |
||
|
Linus Torvalds
|
66695e7d94 |
firewire-fixes-6.8-final
A fix to suppress warning about unreleased IRQ for 1394 OHCI hardware when disabling MSI In Linux kernel v6.5, a PCI driver for 1394 OHCI hardware was optimized into the managed device resources. Edmund Raile points out that the change brings the warning about unreleased IRQ at the call of pci_disable_msi(), since the API expects that the relevant IRQ has already been released in advance. As long as the API is called in .remove callback of PCI device operation, it is prohibited to maintain the IRQ as the part of managed device resource. As a workaround, the IRQ is explicitly released at .remove callback, before the call of pci_disable_msi(). The pci_disable_msi() is legacy API nowadays in PCI MSI implementation. I have a plan to replace it with the modern API in the development for the future version of Linux kernel. So at present I keep them as is. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZevaBAAKCRCsLtaWM8Lw Ez5LAP9QEraiOsm2JxyCNMmyjWubMd58wSjdVmWW61yKxEegvwD8DPY1eosKXhDA GLWaiRbJ4YbIglEK6zDnmwAz5FYtPw8= =PVzs -----END PGP SIGNATURE----- Merge tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A fix to suppress a warning about unreleased IRQ for 1394 OHCI hardware when disabling MSI. In Linux kernel v6.5, a PCI driver for 1394 OHCI hardware was optimized into the managed device resources. Edmund Raile points out that the change brings the warning about unreleased IRQ at the call of pci_disable_msi(), since the API expects that the relevant IRQ has already been released in advance. As long as the API is called in .remove callback of PCI device operation, it is prohibited to maintain the IRQ as the part of managed device resource. As a workaround, the IRQ is explicitly released at .remove callback, before the call of pci_disable_msi(). pci_disable_msi() is legacy API nowadays in PCI MSI implementation. I have a plan to replace it with the modern API in the development for the future version of Linux kernel. So at present I keep them as is" * tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: prevent leak of left-over IRQ on unbind |
||
Paolo Bonzini
|
5abf6dceb0 |
SEV: disable SEV-ES DebugSwap by default
The DebugSwap feature of SEV-ES provides a way for confidential guests to use
data breakpoints. However, because the status of the DebugSwap feature is
recorded in the VMSA, enabling it by default invalidates the attestation
signatures. In 6.10 we will introduce a new API to create SEV VMs that
will allow enabling DebugSwap based on what the user tells KVM to do.
Contextually, we will change the legacy KVM_SEV_ES_INIT API to never
enable DebugSwap.
For compatibility with kernels that pre-date the introduction of DebugSwap,
as well as with those where KVM_SEV_ES_INIT will never enable it, do not enable
the feature by default. If anybody wants to use it, for now they can enable
the sev_es_debug_swap_enabled module parameter, but this will result in a
warning.
Fixes:
|
||
|
Paolo Bonzini
|
39fee313fd |
Merge tag 'kvm-x86-guest_memfd_fixes-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM GUEST_MEMFD fixes for 6.8: - Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to avoid creating ABI that KVM can't sanely support. - Update documentation for KVM_SW_PROTECTED_VM to make it abundantly clear that such VMs are purely a development and testing vehicle, and come with zero guarantees. - Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan is to support confidential VMs with deterministic private memory (SNP and TDX) only in the TDP MMU. - Fix a bug in a GUEST_MEMFD negative test that resulted in false passes when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged. |
||
|
Paolo Bonzini
|
1b6c146df5 |
Merge tag 'kvm-x86-fixes-6.8-2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.8, round 2: - When emulating an atomic access, mark the gfn as dirty in the memslot to fix a bug where KVM could fail to mark the slot as dirty during live migration, ultimately resulting in guest data corruption due to a dirty page not being re-copied from the source to the target. - Check for mmu_notifier invalidation events before faulting in the pfn, and before acquiring mmu_lock, to avoid unnecessary work and lock contention. Contending mmu_lock is especially problematic on preemptible kernels, as KVM may yield mmu_lock in response to the contention, which severely degrades overall performance due to vCPUs making it difficult for the task that triggered invalidation to make forward progress. Note, due to another kernel bug, this fix isn't limited to preemtible kernels, as any kernel built with CONFIG_PREEMPT_DYNAMIC=y will yield contended rwlocks and spinlocks. https://lore.kernel.org/all/20240110214723.695930-1-seanjc@google.com |
||
Colin Ian King
|
5205a4aa8f |
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
The helper function mac_fix_string is only required with CONFIG_PPC_PMAC, add #if CONFIG_PPC_PMAC and #endif around the function. Cleans up clang scan build warning: block/partitions/mac.c:23:20: warning: unused function 'mac_fix_string' [-Wunused-function] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240308133921.2058227-1-colin.i.king@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Gabriel Krisman Bertazi
|
606559dc4f |
io_uring: Fix sqpoll utilization check racing with dying sqpoll
Commit |
||
|
Linus Torvalds
|
09e5c48fea |
A follow-up for sparse read fixes that went into -rc4 -- msgr2 case was
missed and is corrected here. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmXrlqwTHGlkcnlvbW92 QGdtYWlsLmNvbQAKCRBKf944AhHzi4epB/wILSnZBbhFevm81CVndx48FS0e3b6+ 3coFf26FbzfTR7HnK+0BHrNfAak6Esbgq0QuPiQyu7uDrgVBEvAcnQdYu7j+QCl8 AcDbpBmPlq1tuaRab3/hxOW5G62oEq5uFajPuSJ23K3NXDu+NLZLcpmcUBUxpN+N rN4GNEFXqHIaMXVF1DpHXmtNY/NGqS66e/MqK4L9IQKjfcBfYSrmyWTNfFtcDT1x GxXtieS/4d/kbQqBCUTdk0ER3175fZWvFf/R/h89Npch3hMicc9BGILwtuJCrRix VqlGhegMub+7IB5sUr0WhSnXCZ77/kGtvNg5jTFcoPi5xsYMRZrXCVM9 =3YdE -----END PGP SIGNATURE----- Merge tag 'ceph-for-6.8-rc8' of https://github.com/ceph/ceph-client Pull ceph fix from Ilya Dryomov: "A follow-up for sparse read fixes that went into -rc4 -- msgr2 case was missed and is corrected here" * tag 'ceph-for-6.8-rc8' of https://github.com/ceph/ceph-client: libceph: init the cursor when preparing sparse read in msgr2 |
||
|
Linus Torvalds
|
10d48d70e8 |
Char/Misc driver changes for 6.8-rc8 (or -final)
Here are a few small char/misc and other driver subsystem fixes for reported issues that have been in my tree for inclusion in 6.8-rc8 or -final, which ever is next. Included in here are fixes for: - iio driver fixes for reported problems - much reported bugfix for a lis3lv02d_i2c regression - comedi driver bugfix - mei new device ids - mei driver fixes - counter core fix All of these have been in linux-next with no reported issues, some for many weeks. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZetI4A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylm6wCfT0KKJhCWFtUrEmvgu3NWjdRVHmMAnj01w5j0 t2aTmnRJd+TeA/yTTDSz =Wsg2 -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc and other driver subsystem fixes for reported issues that have been in my tree. Included in here are fixes for: - iio driver fixes for reported problems - much reported bugfix for a lis3lv02d_i2c regression - comedi driver bugfix - mei new device ids - mei driver fixes - counter core fix All of these have been in linux-next with no reported issues, some for many weeks" * tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: gsc_proxy: match component when GSC is on different bus misc: fastrpc: Pass proper arguments to scm call comedi: comedi_test: Prevent timers rescheduling during deletion comedi: comedi_8255: Correct error in subdevice initialization misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume iio: accel: adxl367: fix I2C FIFO data register iio: accel: adxl367: fix DEVID read after reset iio: pressure: dlhl60d: Initialize empty DLH bytes iio: imu: inv_mpu6050: fix frequency setting when chip is off iio: pressure: Fixes BMP38x and BMP390 SPI support iio: imu: inv_mpu6050: fix FIFO parsing when empty mei: Add Meteor Lake support for IVSC device mei: me: add arrow lake point H DID mei: me: add arrow lake point S DID counter: fix privdata alignment |
||
|
Linus Torvalds
|
563c5b02f2 |
TTY/Serial fixes for 6.8-rc8 (or -final)
Here are some small remaining tty/serial driver fixes for 6.8-rc8. Included in here is fixes for: - vt unicode buffer corruption fix - imx serial driver fixes, again - port suspend fix - 8250_dw driver fix - fsl_lpuart driver fix - revert for the qcom_geni_serial driver to fix a reported regression All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZetKOg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylrgACg1Ro50Xu8pgExHSDbTwoPPybjJrcAoJtpv3/f EN3V+fWc4o0+RVT9JNnM =iG2L -----END PGP SIGNATURE----- Merge tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial fixes from Greg KH: "Here are some small remaining tty/serial driver fixes. Included in here is fixes for: - vt unicode buffer corruption fix - imx serial driver fixes, again - port suspend fix - 8250_dw driver fix - fsl_lpuart driver fix - revert for the qcom_geni_serial driver to fix a reported regression All of these have been in linux-next with no reported issues" * tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()" tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled vt: fix unicode buffer corruption when deleting characters serial: port: Don't suspend if the port is still busy serial: 8250_dw: Do not reclock if already at correct rate tty: serial: imx: Fix broken RS485 |
||
|
Linus Torvalds
|
e536e0d44c |
USB / Thunderbolt fixes for 6.8-rc8 (or -final)
Here are some small remaining fixes for USB and Thunderbolt drivers for 6.8-rc8. Included in here are fixes for: - thunderbold NULL dereference fix - typec driver fixes - xhci driver regression fix - usb-storage divide-by-0 fix - ncm gadget driver fix All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZetK3w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymyJwCcDNocBL9ksLyDV3m+VSnzhSUEyQ8AnjJabEAG 8WVMcb6ODE8yMjEuc7zB =aQ7i -----END PGP SIGNATURE----- Merge tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are some small remaining fixes for USB and Thunderbolt drivers. Included in here are fixes for: - thunderbold NULL dereference fix - typec driver fixes - xhci driver regression fix - usb-storage divide-by-0 fix - ncm gadget driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Fix failure to detect ring expansion need. usb: port: Don't try to peer unused USB ports based on location usb: gadget: ncm: Fix handling of zero block length packets usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command thunderbolt: Fix NULL pointer dereference in tb_port_update_credits() |
||
|
Linus Torvalds
|
49deb2805f |
Two pin control fixes for the v6.8 kernel series:
- Fix the PM suspend callback in the STM32 ST32MP257 driver to properly support suspend. - Drop an extraneous reference put in the debugfs code, this was confusing the reference counts and causing unsolicited calls to __free(). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmXrF98ACgkQQRCzN7AZ XXNSfhAAzPbqwsAZ3otg7Yk27QMCt3Fmb+cX2qpREz+/B9qirBsxdaZ6Yff1y46o 5Hq4bzW+1/ivHDfcbvtrcTxCXG+tBTp7AI2zgRaPlE7xoms85jGIkV7gHvkGX7No zRexCS9qTi/dDNkbivWGwEKabmN0mzVnmCYQAG89cjJPPMD/5xnNBD/IKC9Te0e9 39s5f72M+dek9Kw8dvrJor8b+/zdeVp4C1m5U4jghHKxUuLo1iSzh6fhIJtFC52T N7n3vkYwiAddvtVheusp+FJ49JzVh2qbGalUXQy01hOZqCboefzeMnGlk6RoBzCh ktZaisCxScbp0Nne2XXZ04tRVGvU8vYnZslFYXqVhcaogwi1Aj7TGKLkl9jKR9c3 T4+42Mg1nDrAk2pQCDWPLIBmgRXUfHP8zHgIEXLkwfDWbH3toG08RhcP0qYbfZMI pkxUNsOOwJZqAlDmm845OZc9OU17llAOgl+s213c2se3eopWVGr7VlVc1+XEdmKU L2B6A5PrJUaerf54idKVrReQOQ6lUFB+KjbsTcz2D7WCrz4LppK6cFGAE5OU3TTK DUh1epW6T6ovOCg9nhTpZgD3mEpgQr4Evl/dOZKIIMOJXFHT3NOjEvUxjJUdqbjp KKrWkMCkdMUnPpeQRp5v9z1LHs5Lp2nP2RRYOPm3LkN86ovrkLk= =8n6+ -----END PGP SIGNATURE----- Merge tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix the PM suspend callback in the STM32 ST32MP257 driver to properly support suspend - Drop an extraneous reference put in the debugfs code, this was confusing the reference counts and causing unsolicited calls to __free() * tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: don't put the reference to GPIO device in pinctrl_pins_show() pinctrl: stm32: fix PM support for stm32mp257 |
||
|
Linus Torvalds
|
7a4f31c776 |
Input updates for v6.8-rc7
- a revert of endpoint checks in bcm5974 - the driver is being naughty and pokes at unclaimed USB interface, so the check fails. We need to fix the driver to claim both interfaces, and then re-implement the endpoints check - a fix to Synaptics RMI driver to avoid UAF on driver unload or device unbinding - a few new VID/PIDs added to xpad game controller driver - a change to gpio_keys_polled driver to quiet it when GPIO causes probe deferral. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZeqhHAAKCRBAj56VGEWX nNV/AQDOrCWfqrL932EV6/K45siU+sUeTVd2iRIlS3jg52DohgEA53uWXmmU0kvH Hkr6d/cng8X+BfOrO3N7y99Zhc0nlgs= =QQR8 -----END PGP SIGNATURE----- Merge tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a revert of endpoint checks in bcm5974 - the driver is being naughty and pokes at unclaimed USB interface, so the check fails. We need to fix the driver to claim both interfaces, and then re-implement the endpoints check - a fix to Synaptics RMI driver to avoid UAF on driver unload or device unbinding - a few new VID/PIDs added to xpad game controller driver - a change to gpio_keys_polled driver to quiet it when GPIO causes probe deferral. * tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removal Input: gpio_keys_polled - suppress deferred probe error for gpio Revert "Input: bcm5974 - check endpoint type before starting traffic" Input: xpad - add additional HyperX Controller Identifiers |
||
|
Linus Torvalds
|
6dfeb04c46 |
sound fixes for 6.8-final
A collection of small fixes. A half of them are HD-audio quirks while the rest are various device-specific ASoC fixes. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmXqx+YOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE8zIw//cuFpJBmqj/Qkk40BBkPTVIGF42K5IE+zYuxr kO4z4Rq6uI/s1T9pgCGU0c8rLsBfkeW9k6M6fglDusLD4zl7A4NjEOVCl3/rpAwg rQoglgEfBue1PZ/3yVGI1PxBaCGOdoKxyBDNy3dwAzZBe+PJ3cbAsvflAsAK/XqD vjV9SMMgxIfOqWJTAYXKTnk2VSoyFdKulK5n9Eb3941Bj43YOpo0TPmD0YXfmf1b sCvDzGkfUdDM3hkDLlI/uY9T/7vFLYMN9ktF+BEdDmqeVZBwMEnqW7neF3t8uFjn 6OsWCwlU6jHxe3texMEeGwyXDETnK3YSCiYPZQClEuDG6rkOu9XEzsTCuJLK5yQR Q9iY9/R/3UOCa/ykyISAi0oZtL8HgASo2S8FyBiw8bYV7dGw2oXCx5ieLVntuE0R ktSUm8/F0esQ8D3EPdQ4H+St5xSWUIz6vX53T7zJGZ5EOr0Bv9W38L7jXHbmxzd0 GodPCNGOSzNgLxg+pDjj0smJEury14ASTyF5wGGd2SF00cHB71QPlORbcBD44X6q PxFSZ3R56PWVyrsD6IONrP88af9M9zM/tR458pYi+eoRFyYTungFZDvSeWzdGA37 7i/z396TzYQrkXSoTfLef0R0vIt2s816ZUvNluikBWQJnvDxrUvoNFCwV0Qa8bKn jh7EDfM= =TMCk -----END PGP SIGNATURE----- Merge tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes. Half of them are HD-audio quirks while the rest are various device-specific ASoC fixes" * tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table ASoC: rcar: adg: correct TIMSEL setting for SSI9 ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P ALSA: hda/realtek - Add Headset Mic supported Acer NB platform ALSA: hda: optimize the probe codec process ALSA: hda/realtek - Fix headset Mic no show at resume back for Lenovo ALC897 platform ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet ASoC: madera: Fix typo in madera_set_fll_clks shift value |
||
|
Linus Torvalds
|
e6fac3c1f3 |
drm fixes for 6.8 final
MAINTAINERS - update email address core: - fix polling in certain configurations buddy: - fix kunit test warning panel: - boe-tv101wum-nl6: timing tuning fixes i915: - Fix to extract HDCP information from primary connector - Check for NULL mmu_interval_notifier before removing - Fix for #10184: Kernel crash on UHD Graphics 730 (Cc stable) - Fix for #10284: Boot delay regresion with PSR - Fix DP connector DSC HW state readout - Selftest fix to convert msecs to jiffies xe: - error path fix amdgpu: - SMU14 fix - Fix possible NULL pointer - VRR fix - pwm fix nouveau: - fix deadlock in new ioctls fail path - fix missing locking around object rbtree udl: - apply and revert format change -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmXqit4ACgkQDHTzWXnE hr4yvQ//afjOeORfmzmu1OUkdJB8NdwvkvVImK5gF2h84vmRBFZ+zR365t/miFNn mhCNOajLI5QSjUufdEyrBbTJlJQUYcH2LiJSJ0yfXfimtgzapdUUUx72Shya/r/R h6BT3JRw/6HzQnmN6jso9IdJd1Xn5ct0eFKNnOWcf0AKVex6I5iZF9vTiv70ymX6 h1szrOB89ecGSAAvky9fQrjkg/XE+GlYV4j9H27d4x1X8sdZOjL096YHtFSDqWeo D44uUT+4isWsQgcpM11VDvbzWNLLFx4pLkWPODT8jfzL0N+FZ687T2256VnZLTH9 bIHfs257mlJ9zwWorXvXCYX1fUG02G7GFJtvwm2Em5sa6Eow9P+DZ84ZorDK2/Wv OdFWjAKCL+5UkGUbzXsl8jB6/Hvez3WjRJEWt9x8b+RpGryuxSqFAJYvs3NC2V8r ZLHG4lGz8WDgy//Jt0OrtpeQr8e1ogMykCP4/+L0oIuYKjKzgH8ia/zBcKz3KVPy MMUStSGIrYgQ+2m/hL2A1NCcLaQ2OK2mO3RWVQImLjnYarvLYZpPScevfCwqS9Od Fs+jmDFryThlGSlmD8G8+wX+28bLz/xhYR/fWiEF3I4uUVC4p/jRo+4m2TUNP//j ZAWyuy7bbuT7vmxFnvWAhsxl21Ia4bVIIb3sede9fpyVPWIDB3c= =g/du -----END PGP SIGNATURE----- Merge tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel Pull drm fixes from Dave Airlie: "Regular fixes (two weeks for i915), scattered across drivers, amdgpu and i915 being the main ones, with nouveau having a couple of fixes. One patch got applied for udl, but reverted soon after as the maintainer has missed some crucial prior discussion. Seems quiet and normal enough for this stage. MAINTAINERS - update email address core: - fix polling in certain configurations buddy: - fix kunit test warning panel: - boe-tv101wum-nl6: timing tuning fixes i915: - Fix to extract HDCP information from primary connector - Check for NULL mmu_interval_notifier before removing - Fix for #10184: Kernel crash on UHD Graphics 730 (Cc stable) - Fix for #10284: Boot delay regresion with PSR - Fix DP connector DSC HW state readout - Selftest fix to convert msecs to jiffies xe: - error path fix amdgpu: - SMU14 fix - Fix possible NULL pointer - VRR fix - pwm fix nouveau: - fix deadlock in new ioctls fail path - fix missing locking around object rbtree udl: - apply and revert format change" * tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel: (21 commits) nouveau: lock the client object tree. drm/tests/buddy: fix print format drm/xe: Return immediately on tile_init failure drm/amdgpu/pm: Fix the error of pwm1_enable setting drm/amd/display: handle range offsets in VRR ranges drm/amd/display: check dc_link before dereferencing drm/amd/swsmu: modify the gfx activity scaling Revert "drm/udl: Add ARGB8888 as a format" drm/i915/panelreplay: Move out psr_init_dpcd() from init_connector() drm/i915/dp: Fix connector DSC HW state readout drm/i915/selftests: Fix dependency of some timeouts on HZ drm/udl: Add ARGB8888 as a format drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf drm/i915: Don't explode when the dig port we don't have an AUX CH MAINTAINERS: Update email address for Tvrtko Ursulin drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP (again) drm: Fix output poll work for drm_kms_helper_poll=n drm/i915: Check before removing mm notifier drm/i915/hdcp: Extract hdcp structure from correct connector drm/i915/hdcp: Remove additional timing for reading mst hdcp message ... |
||
Uwe Kleine-König
|
d8d6608b76 |
block/swim: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/a00aea8201ea85ae726411bb0fb015ea026ff40a.1709886922.git.u.kleine-koenig@pengutronix.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Pavel Begunkov
|
1af04699c5 |
io_uring/net: dedup io_recv_finish req completion
There are two block in io_recv_finish() completing the request, which we can combine and remove jumping. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0e338dcb33c88de83809fda021cba9e7c9681620.1709905727.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Pavel Begunkov
|
e0e4ab52d1 |
io_uring: refactor DEFER_TASKRUN multishot checks
We disallow DEFER_TASKRUN multishots from running by io-wq, which is checked by individual opcodes in the issue path. We can consolidate all it in io_wq_submit_work() at the same time moving the checks out of the hot path. Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e492f0f11588bb5aa11d7d24e6f53b7c7628afdb.1709905727.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Pavel Begunkov
|
3a96378e22 |
io_uring: fix mshot io-wq checks
When checking for concurrent CQE posting, we're not only interested in
requests running from the poll handler but also strayed requests ended
up in normal io-wq execution. We're disallowing multishots in general
from io-wq, not only when they came in a certain way.
Cc: stable@vger.kernel.org
Fixes:
|